Just upgraded from Etch and now I'm stuck at 640x480 resolution. Xorg.conf doesn't show any display modes, and xrandr gives the only resolution as 640x480. The laptop is a Toshiba Tecra 730XCDT. I know its a doorstop, but 800x600 worked fine under Etch. Anyone know how to to change it back? It's really hard to look at right now.
View 3 RepliesI've finally managed to get the nvidia driver on my Lenny box. However I've now found that I can't change resolution from 640x480, the nvidia panel shows this and 320x240 as the only resolution. The layout shows "hidden as under 600 pixels" If I go to gnome screen resolutions it only shows 640x480. If I plug a second monitor in it won't detect it.
I'm using NVIDIA-Linux-x86-180.51-pkg1.run, older versions appear not to work with Lenny crashing x on boot. How to change resolution on the nvidia in Lenny?
I am running fedora 11 live cd on a work computer waiting on a new harddrive. Ran knoppix and Gos 3.1 fine. they start at 800x600 but can relatively easily be changed to much better but fedora likes this really low resolution on the monitor 640x480. In Gos I unhide screens and graphics and change it there but fedora doesn't seem to have this basic setting utility. Where is it in fedora or its equivilant. The basic monitor setting only offers the 1 option and even this box is not fully visible, ok and cancel are cut off at the bottom. Going back to Gos for now, though someone managed to crash it while surfing the net. mATX Via chipset p4m800 s3 unichrome graphics. linux loads vesa drivers instead of s3 unichrome drivers.
View 1 Replies View RelatedMy Ubuntu can not go any higher then 640x480. I have found out what the problem is. The monitor has broken down (firmware or some thing) but still works fine in Windows. How do i know this ? Well a few mouths ago i was on Windows Me and one day it booted up saying that it is installing a default driver for the screen , so i let it do and after it did that it would never use the VA702 driver. Also the resolution could get higher then 1280x1024(this is the screens biggest res). A other mouth later i installed Windows XP and when using it i tried to install the VA702 driver but it did not work so i had to manually install it which worked but did not get correct resolutions e.g. could go higher than the monitor is meant to go. Now in Ubuntu can't go higher then 640x480. How can i fix this ?
Screen : ViewSonic VA702
Graphics Card : Winfast My Vivo A170 Geforce 4 MX 440 AGP 4x 64MB DDR
Ubuntu:9.10
Resolution won't go higher than 640x480 with a TV
View 1 Replies View Relatedİ have nvidia fx 5200. when i was install my driver resolution stack at 640x480 and i cant change to 1024x768.
View 1 Replies View RelatedI have on old Thinkpad T42 with the Mobility Radeon 7500 graphics chip. It used to work like a charm with the open source radeon driver, until KMS came along. It had no problems except for fullscreen being always black. I thought this is because I have an old card, and used 'nomodeset' in the kernel line, which strangely cranked up the memory usage and made the system choppier, but I managed. Today I was testing the use of an external monitor at home, and found out not only that it only works properly with KMS enabled, but fullscreen games work like a charm (e.g. DOSBox, which I use a lot).
After experimenting a bit, I found out that on the internal display (LCD), 640x480 produces a black screen, while others work as expected. so i set dosbox to use 800x600 as the fullscreen resolution, and it works. The problem is that there are a lot of games (and apps) that I use which provide no configuration options to set the resolution, so I end up with a black screen (when I'm using the internal display, of course). Bottom line: I'm not asking for anyone to fix my problems from a distance, basically blindfolded.
i recently moved away from ubuntu (as they wouldn't let me change my gdm themes lol) i installed lenny usin the net install for ia86 but i cannot change my screen resolution from 1024x768 to my card/monitors native setting of 1366x768 i have included a .txt taken from the benchmark an profile gizmo which i hope rovide any of you with all the info needed (to be honest i don't understand half of it) my laptop is a fujitsu amilo li3710 with dual core, 3gb ram an 160gb hd an a intel gma4500 with shared memory graphics
View 2 Replies View RelatedI am test driving Ubuntu 9.04 (Desktop) - the screen resolution always pops up as 800 x 600 - Preference Display tells me there is a different graphics driver (which I have installed) and set to 1280 X 800 which then works till I re-boot. I changed it in NVIDIA X Server Settings. When I try to save to X configuration I get a message "Unable to create new X config backup file '/etc/X11/xorg.conf.backup'." - which I presume is because I am not in superuser mode - how do I set up a superuser account (is this even possible?) or is there a nioce simple way for a real newbie to fix this?
View 3 Replies View RelatedI made a total reinstall of Slack 13.1 the other day and all went seemingly well. After a lot of experimenting and deciding I wanted the disk partitioned differently, a reinstall felt about right. But when I started X the resolution was all too low. xorg.conf was adjusted with the properties of my screen (GDM 4011P). Once upon a time, the Xorg config-tool would ask me my opinion, but now it flashes by and I have to live with what it comes up with.
The nVidia driver was installed (legacy for GeForce 3). I know the config is read, because it fails parsing if I have kHz with the sync-figures. But it otherwise disregard my wish to run at 1280x1024. In XFCE I can run the nVidia configuration tool, but it offers only auto, 320x240 or 640x480. The screen is too small for me to click "ok" on several occasions. The machine is capable of 64bit, 2GHz. But I installed the 32bit version of 13.1, it has 1,5GB RAM.
Just installed 5.3 into a VMWare image.
In System > Preferences > Screen Resolution I only get 640x480 option.
How do I get 1024 x 768?
Well I have installed lenny from netinstall, with Xfce on a virtual machine, everything runs smooth and I really like how does it work, I just have a little big problem, the resolution is too high, it is higher than the host resolution, if I have to work in the down part of the screen I have to scroll down in host, it is kinda annoying, under screen config (right click>configuration>screen config) for resolution only the default option is available. I have googled and I have found that /etc/X11/xorg.conf must be modified to use another resolution, but I'm not sure of what to change or what to do exactly.
View 2 Replies View RelatedGNOME decided not to use the correct resolution ever. In Ubuntu, it got it automatically and that said it should be 1366x768, and when i run this:
Code:
xrandr -s 1366x768
I get
Code:
Size 1366x768 not found in available modes
So then I tried to run xrandr and find out what was available and I got:
Code:
$ xrandr
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected
[code]....
So when I try to change it to 1024x768, I get the same "not found in available modes" message.
I have a FX 5200 and a 26" TV with VGA input which supports 1330x760. No problem with this in Windows, but in Ubuntu, as soon as I install nvidia drivers (175) resolution goes 640x480.
I've tried editing xorg.conf in several different ways, but resolution didn't change, maybe I was doing it the wrong way.
PD: 10.04 Lucid Lynx fresh install
I am a first time user and recently installed 9.10 from a LiveCd then immediately upgraded to 10.04 LTS. I had no black screen problem, but my resolution is stuck at 640x480 with no other options. I upgraded my driver to NVIDIA-Linux-x86_64-195.36.31 and the resolution remains the same. I have a Geforce GTS 250 and an Acer H233H capable of 1920x1080_75.
My XFile:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Jun 3 09:41:37 PDT 2010
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package .....
I have tried entering a CVT generated modeline to the xorg file but it did nothing.
I have just installed Ubuntu Server 10.04. With Version 8.04 I had no problem to change the resolution from 640x480 to 1440x900 (console, no GUI installed). With 10.04, it does not work, the only resolution that works is 640x480. I have tried the following:
Changed: GRUB_GFXMODE=1440x900
Result: Success, Grub comes up with 1440x900, but when booting, the resolution changes to 640x480
Changed: GRUB_GFXPAYLOAD_LINUX=1440x900
Result: Booting -> blank screen > automatic reboot
Changed: GRUB_GFXPAYLOAD_LINUX=keep
[Code]...
I have a BIG issue with my fresh Maverick install : when I install proprietary drivers via the graphic utility, either one proposed, the screen resolution is then max in 640x480. But I have hardware acceleration and compiz effects !
I tried, I think, everything. Forcing the resolution in xorg, in monitors.xml, try the newest ones via the ppa, install an older (and used to be working I'm positive) one with .run (which just prevent any graphic display).
I am RHEL 5. I just installed it and when i try to config display it how only two resolution by default 640x480,800x600.No other resolution option is shown. I tried by editing xorg.conf but of no use.
View 2 Replies View RelatedI use slackware 13.0 64bit and VGA EN9400GT, I have two monitor samsung that is: SNX(CRT-0) && 943SNX(CRT-1) series, i had try setting it in nvidia X server settings but the resolution as CRT-1 only have 2 options that is: 640x480 & 320x240. this is my xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Mar 12 02:13:46 PST 2010
[Code]....
I have tried many variations of the following, but always get the same error.
Quote:
# aptitude install postgresql-8.3
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
I had the following problem when I installed ubuntu 10.10: - my video was only able to show 640x480 and the installation was a nightmare (I started more than 10 times until I was able to finish - because right-down buttons are not visible ...) If you need more details about my hardware let me know and I can run some software to collect data about my hardware if is necessary. Basically I have a dual monitor system (one lower resolution and one with higher resolution). A nice fix will be (if possible) to not clone automatically the screen on both screens -> and to give me the option to choose the video settings (before starting the installation - and this screen to have always 640x480 ...)
View 9 Replies View RelatedI have a fujitsu siemens monitor C776 (built by Hansol E17CL)
FC12 can't autodetect it
If I go system -> preferences -> display the button: detect monitor does not work
I can't change resolution which is stopped at 640x480:
I downloaded and installed a fresh ISO and already installed it 3 times in my PC but after a seemingly good installation, my machine would shutdown when I try to boot my freshly installed lenny. It was a good CD. I encountered no error reports while installing but I can't understand why after I click on Debian lenny in the grub, it would act as if it were booting and then suddenly shutdown.
View 12 Replies View RelatedI cant get lime wire installed on my debian lenny. the repositories was changed to contrib non-free, still no go. Cant seem to get any kind of documentation even after 2 days of googling.
View 13 Replies View RelatedI'm trying to install debian lenny on a Asus A7V board, with PCI ethernet card containing RTL8139 chipset.I'm using the netinstall cd. Installation fails because the network card is not recognized during the install, thus no DHCP, thus no internet.Kernel is 2.26.x
View 8 Replies View RelatedDuring the installation the installer asked me if my clock was set to UTC. I didn't know what that meant so I said yes. Now whenever I boot into Lenny it messes up the time of day, and since I dual boot with puppy and knoppix on this machine, the time of day is messed up in those systems also. Any idea how to permanently undo the damage in Lenny?
View 14 Replies View RelatedI at trying to get my Intuos 3 installed on Debian Lenny AMD64. I installed both the xserver-xorg-input-wacom and wacom-tools. The problem is that the tablet works like a mouse. I have to press down and move the pen for it to work. In Windows, I can just hover over the tablet without making contact and it will move the cursor. Also, it isn't calibrated to the screen.
I put "wacom" in /etc/modules. Here is my xorg.conf though
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 (buildmeister@builder103.nvidia.com) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
[Code].....
I could not get the hardware to work with Lenny's ancient drivers, so I gave up and decided to upgrade to Squeeze.Well, the hardware works (except sound), but KDE4 is a such a disaster that I want to run not walk! all the way back to Lenny. I'm stunned that after four years of active development, this desktop still doesn't have something as basic as keyboard shortcuts or the ability to place icons where YOU want them.
The widgets frustrate me to no end. The new K menu is impossible to navigate. I'd rather hang myself than use Dolphin as a file manager. KDE4 gives me more notifications than MS Windows' crapware. And it's UGLY !!! The "Oxygen" theme makes me want to tear my eyeballs out.
Been working with this problem for over a week now and has come to a dead end, I have installed pureFTPD with MySQL on Debian 5 Lenny 64bit. My problem is I can't login with the users in the sql-database, but for some strange reason, I'm allowed to loggin as anonymous. Unix users can't login either.
I have followed the guide on: [URL]..
- Created a ftpgroup and ftpuser.
- Created a database ftpd
- Created a user vhosts and given access to ftpd db
My configurations files
/etc/pure-ftpd/auth/30mysql
Code:
/etc/pure-ftpd/db/mysql.conf
/etc/pure-ftpd/db/mysql.conf
[Code]...
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).