General :: VLC Stream Size - Stuck At 640x480
May 8, 2011VLC can open my webcam using the Media → Open Capture Device menu. However, how do I control the webcam capture resolution? It seems to be stuck at 640x480.
View 1 Replies
ADVERTISEMENT
Slackware :: Stuck With 640x480 Screen Resolution
Sep 7, 2010I made a total reinstall of Slack 13.1 the other day and all went seemingly well. After a lot of experimenting and deciding I wanted the disk partitioned differently, a reinstall felt about right. But when I started X the resolution was all too low. xorg.conf was adjusted with the properties of my screen (GDM 4011P). Once upon a time, the Xorg config-tool would ask me my opinion, but now it flashes by and I have to live with what it comes up with.
The nVidia driver was installed (legacy for GeForce 3). I know the config is read, because it fails parsing if I have kHz with the sync-figures. But it otherwise disregard my wish to run at 1280x1024. In XFCE I can run the nVidia configuration tool, but it offers only auto, 320x240 or 640x480. The screen is too small for me to click "ok" on several occasions. The machine is capable of 64bit, 2GHz. But I installed the 32bit version of 13.1, it has 1,5GB RAM.
Ubuntu Multimedia :: Resolution Stuck At 640X480 With No Other Options
Jun 14, 2010I am a first time user and recently installed 9.10 from a LiveCd then immediately upgraded to 10.04 LTS. I had no black screen problem, but my resolution is stuck at 640x480 with no other options. I upgraded my driver to NVIDIA-Linux-x86_64-195.36.31 and the resolution remains the same. I have a Geforce GTS 250 and an Acer H233H capable of 1920x1080_75.
My XFile:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Jun 3 09:41:37 PDT 2010
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package .....
I have tried entering a CVT generated modeline to the xorg file but it did nothing.
Ubuntu Multimedia :: NVidia 8500GT Card Stuck In 640x480?
Jan 14, 2010I have just installed Ubuntu 9.10 Karmic on my HTPC, and it detected my TV (connected via DVI, so is a monitor effectively) OK, and displayed the proper resolution of 1360 x 768. I want to use the proper nVidia drivers which I've enabled using the restricted drivers tool in Ubuntu. On doing this, it has set the resolution to 640 x 480, and the nVidia configuration tool will not let me set it any higher.
1. The contents of xorg.conf are now irrelevant as of the last few versions of X?
2. The nVidia software is not reading the EDID information from my TV properly?
Ubuntu :: Nvidia 9600gt : Resolution Stuck On 640x480 With Proprietary Drivers
Oct 20, 2010I have a BIG issue with my fresh Maverick install : when I install proprietary drivers via the graphic utility, either one proposed, the screen resolution is then max in 640x480. But I have hardware acceleration and compiz effects !
I tried, I think, everything. Forcing the resolution in xorg, in monitors.xml, try the newest ones via the ppa, install an older (and used to be working I'm positive) one with .run (which just prevent any graphic display).
OpenSUSE :: 11.2 - VNC Window Size Stuck At 1024X768
Apr 16, 2010I have 11.2 32 bit running in ESXi on a Dell 2850 in my colo and its working just fine. I even set the VM to allow large resolutions and am running the console at 1440x900. At first I also had the issue with just a black screen and white X pointer, but after reading I found that going into YaST > etc/sysconfig > Desktop > Display Manager > Setting of: DISPLAYMANAGER_REMOTE_ACCESS: > and changing the value from yes to no then back to yes again then rebooting, all was good.
Now on to my actual issue. Now that I can get to my system remotely via RealVNC and don't have to keep an open session logged in (ala Remote Desktop) I am finding that the window is stuck at 1024x768. I just cant find where I need to change the geometry settings to make it 1440 x 900 like my console window is in ESXi. Have been doing a lot of reading and have tried a bunch of stuff but none of it works, too much to list. I am obviously missing something and its probably really simple, but I am just not getting it.
Software :: Not Able To Stream / Connect To Stream Using Vlc
Dec 26, 2010It seems I might be having an issue that's a non-issue. I am not able to stream/ connect to a stream using vlc.I've looked at a few walk-throughs; I follow the steps and as often as not I get no error messages but cannot connect to a stream.
View 1 Replies View RelatedGeneral :: Xorg.conf - Can't Adjust The Screen Density Between 640x480 And 1024x768 By Hitting "<ctl><alt>+ Or <ctl<alt>"
Nov 1, 2010Up through Slackware 13.0 I used xorg.conf without trouble. On Slackware 13.1 I am caught between two unacceptable alternatives. If I don't use xorg.conf at all I can't adjust the screen density between e.g., 640 x 480 and 1024 x 768 by hitting <ctl><alt>+ or <ctl<alt>- If I use the same xorg.conf that I have used for years I gain the above facility but when I go to a console session via <ctl><alt>F1 the monitor complains that it is being fed bad information. If I can't resolve this conflict I will have to retreat to Slackware 13.0.
View 2 Replies View RelatedUbuntu :: Resalution Only Goes Up To 640x480 / What To Do?
Jan 26, 20101 anyways this magnified desktop is killing me i don't know how to solve it and the resolution only goes up to 640x480 and i don't know wt to do !
View 1 Replies View RelatedFedora :: Cannot Change Resolution To Above 640x480
Aug 12, 2009I am running fedora 11 live cd on a work computer waiting on a new harddrive. Ran knoppix and Gos 3.1 fine. they start at 800x600 but can relatively easily be changed to much better but fedora likes this really low resolution on the monitor 640x480. In Gos I unhide screens and graphics and change it there but fedora doesn't seem to have this basic setting utility. Where is it in fedora or its equivilant. The basic monitor setting only offers the 1 option and even this box is not fully visible, ok and cancel are cut off at the bottom. Going back to Gos for now, though someone managed to crash it while surfing the net. mATX Via chipset p4m800 s3 unichrome graphics. linux loads vesa drivers instead of s3 unichrome drivers.
View 1 Replies View RelatedUbuntu :: Resolution Cant Get Higher 640x480.
Jan 2, 2010My Ubuntu can not go any higher then 640x480. I have found out what the problem is. The monitor has broken down (firmware or some thing) but still works fine in Windows. How do i know this ? Well a few mouths ago i was on Windows Me and one day it booted up saying that it is installing a default driver for the screen , so i let it do and after it did that it would never use the VA702 driver. Also the resolution could get higher then 1280x1024(this is the screens biggest res). A other mouth later i installed Windows XP and when using it i tried to install the VA702 driver but it did not work so i had to manually install it which worked but did not get correct resolutions e.g. could go higher than the monitor is meant to go. Now in Ubuntu can't go higher then 640x480. How can i fix this ?
Screen : ViewSonic VA702
Graphics Card : Winfast My Vivo A170 Geforce 4 MX 440 AGP 4x 64MB DDR
Ubuntu:9.10
Ubuntu :: How To Start Boot Cd In 640x480
May 19, 2010My monitor only supports 640x480 resolution, so how can I start Ubuntu's live CD at this resolution?
View 1 Replies View RelatedUbuntu :: Resolution Won't Go Higher Than 640x480 With A TV
May 24, 2010Resolution won't go higher than 640x480 with a TV
View 1 Replies View RelatedUbuntu :: 10.10 Can't Be Installed With Video 640x480?
Oct 21, 2010I had the following problem when I installed ubuntu 10.10: - my video was only able to show 640x480 and the installation was a nightmare (I started more than 10 times until I was able to finish - because right-down buttons are not visible ...) If you need more details about my hardware let me know and I can run some software to collect data about my hardware if is necessary. Basically I have a dual monitor system (one lower resolution and one with higher resolution). A nice fix will be (if possible) to not clone automatically the screen on both screens -> and to give me the option to choose the video settings (before starting the installation - and this screen to have always 640x480 ...)
View 9 Replies View RelatedUbuntu :: Resolution Stack At 640x480?
Nov 8, 2010İ have nvidia fx 5200. when i was install my driver resolution stack at 640x480 and i cant change to 1024x768.
View 1 Replies View RelatedHardware :: 640x480 Resolution With Radeon And KMS
Aug 25, 2010I have on old Thinkpad T42 with the Mobility Radeon 7500 graphics chip. It used to work like a charm with the open source radeon driver, until KMS came along. It had no problems except for fullscreen being always black. I thought this is because I have an old card, and used 'nomodeset' in the kernel line, which strangely cranked up the memory usage and made the system choppier, but I managed. Today I was testing the use of an external monitor at home, and found out not only that it only works properly with KMS enabled, but fullscreen games work like a charm (e.g. DOSBox, which I use a lot).
After experimenting a bit, I found out that on the internal display (LCD), 640x480 produces a black screen, while others work as expected. so i set dosbox to use 800x600 as the fullscreen resolution, and it works. The problem is that there are a lot of games (and apps) that I use which provide no configuration options to set the resolution, so I end up with a black screen (when I'm using the internal display, of course). Bottom line: I'm not asking for anyone to fix my problems from a distance, basically blindfolded.
Ubuntu :: Screen Resolution Keeps Reverting To 640X480
Feb 10, 2010I am test driving Ubuntu 9.04 (Desktop) - the screen resolution always pops up as 800 x 600 - Preference Display tells me there is a different graphics driver (which I have installed) and set to 1280 X 800 which then works till I re-boot. I changed it in NVIDIA X Server Settings. When I try to save to X configuration I get a message "Unable to create new X config backup file '/etc/X11/xorg.conf.backup'." - which I presume is because I am not in superuser mode - how do I set up a superuser account (is this even possible?) or is there a nioce simple way for a real newbie to fix this?
View 3 Replies View RelatedUbuntu Multimedia :: Display Trapped In 640x480
Mar 20, 2010Gents:
Running x64-U_8.04.1/EVGA_nv9400/Viewsonic 19" LCD
On a concurrent forum--INSTALL-- thread I've reported being "trapped" in a 640x480 screen resolution after changing graphics cards. It is very difficult/impossible to use screen GUI-function as displays overlap and do-NOT "traverse".
I have got installed the NVidia GUI tool which reports the proper card, screen display ( 1280x1040 ) and the current X-WIn setting ( 640x480 ).
A poster on <INSTALL> suggested use of the CLI command <xrandr> to fix screen display ... thus perhaps allowing full GUI function for changing X-WIN setting. Is use of <xrandr> the best-available method for me to get out of the 640x480 "trap"?
Ubuntu :: Monitor Not Detected - 640x480 At Startup?
Jul 11, 2010My Ubuntu server box, has a Iiyama prolite LCD, 22", 1680x1050, that had not problem at all since... I can remember. Since yesterday, after a restart, xserver started in 640x480, with only 320x240 as alternative.
I have latest nVidia drivers installed, and the main difference with last week, is that now, Display Configuration says CRT-1, unknown instead of Iiyama.
I've tried.
1. Uninstall xserver and reinstall.
2. dpkg reconfigure
3. Uninstall nVidia and come back to original Nouveau.
[Code]...
Ubuntu Multimedia :: Nvidia Geforce3 Only Allows 640x480?
Oct 21, 2010I have a fresh install of 10.04 lts I've followed the BinaryDriverHowto on the wiki. Which seemed to install everything ok.
The Nouveau had I believe 1024x768, now all I can seem to get with the proprietary driver is 640x480.
Is there a way to add resolutions to the xorg.config? I tried to use what the howto suggested, but I get video mode not found.
Here's what the Nvidia xorg.config looks like. Don't know if it will help.
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
[Code].....
Debian :: Just Installed Lenny - Only Resolution 640x480
Jan 10, 2011Just upgraded from Etch and now I'm stuck at 640x480 resolution. Xorg.conf doesn't show any display modes, and xrandr gives the only resolution as 640x480. The laptop is a Toshiba Tecra 730XCDT. I know its a doorstop, but 800x600 worked fine under Etch. Anyone know how to to change it back? It's really hard to look at right now.
View 3 Replies View RelatedDebian :: Nvidia On Lenny Only Allows 640x480 Resolution
Apr 23, 2009I've finally managed to get the nvidia driver on my Lenny box. However I've now found that I can't change resolution from 640x480, the nvidia panel shows this and 320x240 as the only resolution. The layout shows "hidden as under 600 pixels" If I go to gnome screen resolutions it only shows 640x480. If I plug a second monitor in it won't detect it.
I'm using NVIDIA-Linux-x86-180.51-pkg1.run, older versions appear not to work with Lenny crashing x on boot. How to change resolution on the nvidia in Lenny?
CentOS 5 :: Only Choice For Screen Resolution Is 640x480?
Jun 13, 2009Just installed 5.3 into a VMWare image.
In System > Preferences > Screen Resolution I only get 640x480 option.
How do I get 1024 x 768?
General :: Tunneling Video Stream Through SSH?
Feb 28, 2011There is an udp video stream accessible only on the local network, but I need to access it outside of the network. I have Linux machine (multiple actually) with root access.There is a small utility that makes the stream accessible on the local machine on port 1234.
./ping -h streamserver -p 1234
If I run it I can access the stream using vlc or mplayer.
mplayer udp://@:1234
vlc udp://@:1234
Now, I'm trying to create a port foward from my remote machine and access the port, but it is failing.
ssh me@machine -L 1234:127.0.0.1:1234
General :: Extracting A Stream From Ffmpeg?
Oct 4, 2010Code:
$ffmpeg -i /data/sumeet/video/hollywood/you don't know jack/You.Dont.Know.Jack.2010.DVDRipwww.theevolution.org_by_digoloko.rmvb
FFmpeg version git-1dbd813, Copyright (c) 2000-2010 the FFmpeg developers
built on Oct 1 2010 19:28:12 with gcc 4.4.3
[Code].....
At least one output file must be specified Actually the video has embedded subtitles. I thing that is stream 0.2 in real media container. How can i pull that data out ?
Debian Hardware :: Need To Force Kernel Framebuffer To 640x480
Jan 20, 2015Some weeks ago i hacked a old NCR all in one computer and installed modern hardware inside it, also installed and old VGA 13" B/W monitor inside (supports 800x600 max)
Then installed debian 7 i386 the installer runs fine, the problem is that after finishing the installation the monitor goes out of sync, the kernel load the i915 module and go out of sync.
So I have to connect another modern monitor and blacklist the i915 module, then get back to the internal VGA monitor.now the system boot fine to the linux console on text mode.
I plan to use this system from text mode (no x windows), the problem i found is that because i blacklisted the i915 module i don't have a /dev/fb0 so the console software i like to run like dosbox or scummvm canno't start because the framebuffer is missing.
What i need is to find a way to force the i915 module to a low resolution (640x480). This is what i tried.
vga=ask (or other options) this option is completele ignored by the kernel seem to by deprecated
passing grub options to the i915 module like video=VGA-1:1280x800 or modeset=1 also are ignored.
Theres some way to do this ?
Ubuntu :: Resolution Won't Go Higher Than 640x480 With Nvidia Drivers?
May 24, 2010I have a FX 5200 and a 26" TV with VGA input which supports 1330x760. No problem with this in Windows, but in Ubuntu, as soon as I install nvidia drivers (175) resolution goes 640x480.
I've tried editing xorg.conf in several different ways, but resolution didn't change, maybe I was doing it the wrong way.
PD: 10.04 Lucid Lynx fresh install
Ubuntu :: Change Grub Settings For Set Gfxmode=640x480
Jul 1, 2011My server showed a black screen on the monitor because the resolution was out of range. I fixed this problem by pressing 'e' at the grub menu and I changed the first line to say "set gfxmode=640x480". What do I need to change in my grub settings to make this a permanent change?
View 7 Replies View RelatedGeneral :: Stream Webcam Using On A Distant SSH SERVER?
May 30, 2010Step #1: Generate DSA Key PairUse ssh-keygen command as follows:$ ssh-keygen -t dsaOutput:
Enter file in which to save the key (/home/vivek/.ssh/id_dsa): Press [Enter] key
Enter passphrase (empty for no passphrase): myPassword
Enter same passphrase again: myPassword
[code]...
General :: UPnP - Something Blocking Data Stream
Aug 4, 2010I have a strange UPnP problem. I'm running myth tv and want to stream data to other things. How to troubleshoot UPnP because I have a feeling something somewhere is blocking it. I've tried doing a tcpdump eth0 host <mac of requesting agent> and not seen anything but ARP requests when I send it, but not when I ask it, just as normal traffic.
View 4 Replies View Related
