Slackware :: Re-Installing The Kernel (damaged After Upgrade)?
Jun 1, 2010
How you doing all? I've my Slackware 13 box. Recently, I have upgraded to -current, and while the upgrade I noticed that my connection went down while it was downloading the new kernel. I had doubts that it got damaged.
Code:
slackpkg upgrade-all and found every thing is up to date. While upgrading, the system asked me to run lilo, and I did. But after rebooting, I got the (Kernel Panic) error. I logged back in using setup disk, and the chroot to my original system root directory. I removed the current Kernels, and now I need to re-install it.. there I'm stuck. Slackpkg isn't working because the box is not connecting to the internet. or links is more than appreciated since I'm not geek enough to sort it by my own. Also few googling didn't set me up with a solution so far.
People, there is a tutorial to upgrade the kernel 2.6.38.3(compiling tutorial included =D) to Slackware 13.1??And, this upgrade generate a better performance on system??
can I upgrade the kernel on my slack 12.2 to the version 2.6.29 or higher?I need the kernel must support the KMS mechanism.Why I need KMS? I want to define virtual screen of size greater than 2048 x 2048. Why I need so huge virtual screen?To run two-display configuration on my dual-head Intel graphic card. At the moment I can set max 2048 x 2048 virtual screen which is not enough for my two displays:LCD of notebook has 1400 x 1050 resolution, and external LCD panel 1280 x 1024. At this moment a part of desktop is on both displays. Small part but causes some problems, and at this moment only awesome (really awesome) window manager can handle this configuration.
I upgrade my slackware to slackware-current. But, when I look /etc/rc.d/rc.modules, it's still symlink to old kernel. Is this normal? Or i must change the symlink manually?
I was running 2.6.35 without any errors. I decided to upgrade to .4 today, used the same config. After i rebooted into the newly compiled kernel i got these errors on boot..
Code: Mounting non-root local filesystems: ntfs-3g: Failed to access volume '/dev/sdc1': No such file or directory ntfs-3g 2010.3.6 integrated FUSE 27 - Third Generation NTFS Driver Configuration type 1, XATTRS are on, POSIX ACLS are off Copyright (C) 2005-2007 Yura Pakhuchiy
[Code]...
I did a complete disk check and it appears to be fine. Then i booted in the default kernel that comes with slackware 13.1 and walla..No errors! What could be the problem? Did someone experience the same issue?
I noticed that slapt-get excludes a lot of package titles based on aaa, glibc, and kernel. I've been wondering why, and haven't been able to find any definitive answers... Anyone here have any ideas on why that is? My Slackware installation is currently kernel 2.6.29.6 (I think) and the newest available on the official repositories is 2.6.32.5 (or something like that).
When I put in slapt-get --upgrade it spits out about 15 packages that are excluded that it won't upgrade. Now, I know I can remove the exclusions by editing the slapt-get configuration file, but I don't want to if it's going to screw something up. So my question is: Is there a reason those are excluded? Is it unsafe to upgrade the kernel with slapt-get?
I have a zyxel dsl (usb) moden, which needs a firmware portion to work, called cxacru-fw.bin.
I have been using this modem using with at least two different slackware distributions, even when the atm drivers were not included in the kernel.
Presently I am using slackware 13.0, with the vmlinuz-huge-smp-2.6.29.6-smp kernel.
I downlowded the 2.6.34 kernel, because I need it for a new webcam, compiled and installed it, and oops! the modem does not work anymore.
I am pretty sure I have configured the kernel correctly; dmesg tells me the modem is recognized by the kernel, as it is with the previous one, but the firmware is not loaded, because the DSL led remains off.
I attach the kernel configuration lines:
I have tried forcing the kernel to load the firmware, using but it didn't work either.
I have changed kernel to 2.6.33. After that ifconfig command shows only my ethernet card, wireless card have disappeared. What is wrong. In the old kernel everything works fine. I am sure that i have installed wi-fi stuff with kernel.
The server runs# uname -r2.6.18-128.4.1.el5However, today I executed yum update kernel*due to security advisory. I was just about to reboot the system when I realized that it runs VMWare Server Instance that will most likely fail to restart after kernel upgrade (I had a hard time fixing it after previous kernel update). Now I want to keep 2.6.18-128.4.1.el5 after reboot.I see that new kernel is scheduled for booting:
I used Backtrack 5 and Fedora, basically I'm trying to install my wireless card but I don't have these installed to make && sudo. I burned the iso images for backtrack and fedora and booted my computer from them but can't figure out how to install kernel-devel on backtrack for example. I dled yum onto my flash drive but can't figure out how to install it.
I installed a fresh copy of Slackware 13.1 (stable) on one of my media servers and I am experiencing something strange.... When I power up the machine, I see the kernel booting, no errors, until it gets to the point where it says:
And then randomly freeze there.... Well the machine is not totally frozen because the cursor still blinks. But it will never continue... Like I said, this happens on a random basis... After a reset, it might go through or simply stall at the same spot.
I remember after installing Slack 13.1, I rebooted the machine but forgot to remove the DVD from the player, so the install routine started up, and froze at the same point when it was loading the kernel for the setup programs...
My mobo is a MSI k9N platinum.
I never had this problem before.... (well I never used 13.1 before). Since I got this machine, I used slack 12.2 and slack 13-current with success.
This problem makes the machine extremely unreliable because I intent to use it as a backup and media server, so chances I will WOL the machine and use it remotely... if that happens.
I have one machine where I have several versions installed on different partitions. The base partition (/dev/hda1) is Slack 12.1. On a spare partition (/dev/hdc4) I had installed Slackware64-current. Last week I slackpkg upgraded and installed the 2.6.32.2 kernel, and now that partition will not boot. I know that with the new kernels the hd* designation has been removed, and have already redone that fstab (accessing it from a different boot) to reflect the sd*. Here is the slack64 section of my lilo.conf:
Code: # Linux bootable partition config begins image = /other/spare4/boot/vmlinuz
it's possible to compile the 2.6.37 kernel patched with the autogroup patch on a Slackware 13.1 system running 2.6.33.4-smp with 2.6.33.4 headers? I just compiled and installed the 2.6.37-autogroup kernel from AUR on my ARCH setup and I like it especially when using firefox with lots of tabs open and other background apps also running. I did notice a speed and smothness difference in my ARCH testing setup with this kernel patch and I can get same results in 13.1??
I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
I would like to update my kernel to version 2.6.32 to see if it solves my tv-tuner card issues (not being recognized by the kernel Lenny uses 2.6.26-2 x64). What steps should I follow to accomplish this upgrade?
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
I'm currently trying to install unRaid on Slackware following this tutorial :[URL].. I'm new to Linux and after many hours, i finally managed to build the new kernel for unRAID (2.6.32.9). But audio on HDMI port doesn't work I tried alsaconf without success. HDMI sound works when i boot into the old kernel.
I try to install Slackware to my IDE hard drive and boot first from Slackware DVD. After I loaded huge.s kernel, and tried to partition the hard drive using fdisk by entering "fdisk /dev/hda", I found out that the partition size is max to 3 Gigs instead of 80 Gigs.
I think the kernel is looking at my boot disk, which is around 3 Gigs. How can I make so that it looks at my IDE drive instead at my boot drive? Is there any manual that shows me how to install Linux from scratch this means I want to wipe out all my hard disk and install Slackware Linux there?
I started a thread asking for advice in the hardware forum. I didn't want to post a duplicate thread, but I was unable to get it moved here, so I'm kindly asking you slackers to help me install the aforementioned driver.
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
I'm now up and running on slackware 13 x64. I have noticed that the version of Python installed was 2.6.2 but there were a lot of bug fixes between this and 2.6.5. What is the best way to get 2.6.5 running on my machine. Do I have to install from source or is anybody aware of any packages that have been released?
Again, I'm not too familiar with package management systems on Slackware as I have always installed from source but this became a bit of a bind recently as updating software to newer versions involved a lot of hard work. Can anybody give me an ideas on the packaging systems available, the best ones to use, and where I can find information about the packages related to the package managers?
I have been given the task to install slackware 13.1 over windows. I have downloaded and copied slackware 13.1 on to a disk, and rebooted the computer, but i am not getting what all the tutorials have shown. I have been looking for tutorials that specifically instruct me as to how to install slackware 13.1 on to a windows xp. I am not trying to dual run I just simply want to run slackware and slackware only.
I would like to recompile my kernel to add few modules to it but I would like to keep my current configuration so as not to have troubles with missing drivers for my hardware and stuff.
We have a Dell 1850 with Debian with 2.4.18 kernel running some critical applications, now the issue is we need to upgrade the memory to 8 GB but the memory is detected by the bios itself, Operating system is not able to detect it, it is showing 3096MB of memory,
After a lot of googling and the artical in linux.com/archive/articles/119287 :: Got more than a gig of RAM and 32-bit Linux? Here's how to use it i came to know the solution i.e
1)I need to install the Bigmem-kernel to detect the ram more than 4Gb,
2) or change some kernel parameters in configuration file and rebuild the kernel
Is there any another solution for this to update operating system to detect the more RAM
We have a Dell 1850 with Debian 3.0 (woody) with 2.4.18 kernel running some critical applications, now the issue is we need to upgrade the memory to 8 GB but the memory is detected by the bios itself, Operating system is not able to detect it, it is showing 3096MB of memory. i came to know the solution i.e I need to install the Bigmem-kernel to detect the ram more than 4Gb, Any another solution for this to update operating system to detect the more RAM.
My company support a client with an old Redhead server " Linux version 2.6.9-5.ELsmp [URL] (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005" My IT department wants to move this old server to a VMware machine and I'm trying to check if this project can fly. Me my self never worked on an old Linux server there for my first question is can I upgrade the kernel with the command yum -y install kernel..... and when I'm done I'm still going to have the old kernel just in case?
When i install slackware12 on xen,no matter in http or ftp,there is always a error as follows.
[root@lx xen]# virt-install --prompt What is the name of your virtual machine? slk How much RAM should be allocated (in megabytes)? 1024 What would you like to use as the disk (file path)? /xen/slk How large would you like the disk (/xen/slk) to be (in gigabytes)? 10 What is the install URL? http://10.1.71.247/slk
