Slackware :: Switch From Huge Kernel To 2.6.38.4 Kernel?
Jun 22, 2011Fresh and Full install: Slackware 13.37 64-bit x86_64. What is the correct procedure to switch from huge kernel to 2.6.38.4 kernel?
View 6 Replies
ADVERTISEMENT
Slackware :: Huge-smp Kernel Does Not Support More Than 4G Of RAM
Nov 15, 2010I am a long time (1.something) slackware user and maintainer of a mirror site.I'm suddenly having problems with my favorite distro. (1) I've been mainly running Slackware64. When I was experiencing recent problems on a Slackware (32) 13.1 system, I discovered the huge-smp kernel does not support more than 4G of RAM. This is an obvious bug, and I am shocked that there is no fix out yet. Surely I can't be the only Slackware 32 user with >4G of RAM. I've verified it on a 12G i7 system and an 8G Athlon64-X2 system.
View 4 Replies View RelatedSlackware :: Create The Huge.s Kernel Files On The Disks?
Apr 12, 2010how to create the huge.s kernel files on the slackware disks? or at least direct me to a post if there is the same question. I currently rsync my files to Alien BOB's script, and i use syslinux to install from my usb stick. i was wanting to install using a later kernel just for testing purposes. (i.e 2.6.34-rc3 as of this writing)
View 9 Replies View RelatedSlackware :: Switch To The Generic Kernel?
Jun 15, 2011One thing I always do is switch to the vmlinuz-generic(-smp) kernel in /etc/lilo.conf and build an initrd (see /boot/README.initrd for details). The "huge" kernel used by default is only meant for installing and not recommended for everyday use. It has a lot of drivers you don't need built-in and uses more RAM than the "generic" kernels.
still trying to find my feet and get to know Slackware. In one of my previous threads, 'things to do after installing' i was told the above message. When i installed, it used the huge kernel, but i'm unsure if that was the one that got installed. when i start slackware up, above the login screen it say, �wecome to Linux 2.6.37.6-smp (tty1)� I was wondering how to swich to the generic smp kernel, do I just change the vmlinuz to the desired, in lilo?
Slackware :: Switch Huge SMP To Generic?
Jun 2, 2011I have installed Slack 13.37 for test on VMware. I installed just all - also all avalible distro. kernel imiges:
Code:
vmlinuz-generic-2.6.37.6
vmlinuz-generic-smp-2.6.37.6-smp
vmlinuz-huge-2.6.37.6
vmlinuz-huge-smp-2.6.37.6-smp
and the default is vmlinuz-huge-smp-2.6.37.6-smp.
Im trying to switch to vmlinuz-generic-2.6.37.6 So, what I did:
fs = ext4
root fs = /dev/sda1
Code:
/boot# mkinitrd -c -k 2.6.37.6 -m ext4 -f ext4 -r /dev/sda1
Edited lilo: pointing new image, lilo command executed. Every time I start new kernel i got this error: [URL]
Fedora :: Chance To Be Able To Switch From A 32 Bit Kernel To 64 Bit Kernel During The Update?
Jul 18, 2010From F12 to F13. Is there anything I should remove before updating? I have few programs isntalled from source/binary installers in /usr for example. Would it cause problems?
And is there any chance to be able to switch from a 32 bit kernel to 64 bit kernel during the update? The hardware is capable of this.
Slackware :: Kernel Hang During Boot Process - Slack 13.1 Stable W/ Kernel 2.6.33.4-smp
Jun 20, 2010I installed a fresh copy of Slackware 13.1 (stable) on one of my media servers and I am experiencing something strange.... When I power up the machine, I see the kernel booting, no errors, until it gets to the point where it says:
And then randomly freeze there.... Well the machine is not totally frozen because the cursor still blinks. But it will never continue... Like I said, this happens on a random basis... After a reset, it might go through or simply stall at the same spot.
I remember after installing Slack 13.1, I rebooted the machine but forgot to remove the DVD from the player, so the install routine started up, and froze at the same point when it was loading the kernel for the setup programs...
My mobo is a MSI k9N platinum.
I never had this problem before.... (well I never used 13.1 before). Since I got this machine, I used slack 12.2 and slack 13-current with success.
This problem makes the machine extremely unreliable because I intent to use it as a backup and media server, so chances I will WOL the machine and use it remotely... if that happens.
Slackware :: Kernel Panic After Upgrading Slackware64-current To 2.6.32.x Kernel?
Jan 20, 2010I have one machine where I have several versions installed on different partitions. The base partition (/dev/hda1) is Slack 12.1. On a spare partition (/dev/hdc4) I had installed Slackware64-current. Last week I slackpkg upgraded and installed the 2.6.32.2 kernel, and now that partition will not boot. I know that with the new kernels the hd* designation has been removed, and have already redone that fstab (accessing it from a different boot) to reflect the sd*. Here is the slack64 section of my lilo.conf:
Code:
# Linux bootable partition config begins
image = /other/spare4/boot/vmlinuz
[code]....
Debian :: Compiling Kernel - 2.6.26 Version Of Kernel Doesn't Longer Exist In Kernel.org Website
Sep 16, 2010i'm using this guide videos - howto: debian linux kernel compilation, part 1 and the author says i need kernel 2.6.26 this version of kernel doesnt longer exist in kernel.org website and the only 2.6.26 i found is a patch here. should i use the patch? or download another version of kernel?
View 2 Replies View RelatedCentOS 5 :: Unable To Switch To New Kernel?
Jan 28, 2011I am running an old kernel for my XEN VPS CENTOS 5.5 x86_64 - 2.6.18-164.el5xenI did a 'yum update kernel' but when I rebooted still the same. I have downloaded the version 'kernel-2.6.18-194.32.1.el5' I cannot find grub.conf in both etc and boot, yes grub is installed via yum.
View 7 Replies View RelatedCentOS 5 :: Switch Kernel Kills Terminal
Sep 8, 2009im a having a problem whit the terminal on my CentOS 5.3.After i installed the kernel-xen and activate it at:/boot/grub/grub.conf.I tried to start a terminal from my root gnome sesion and it shows this error:There was an error creating the child process for this terminal.I know swithcing the kernel made the problem because when i use the old kernel the terminal works fine.and even when i tried to connect to my Centos server via ssh it shows an error after asking for password:Server refused to allocate pty.
View 9 Replies View RelatedSlackware :: ERROR: No /lib/modules/2.6.33.4-smp Kernel Modules Tree Found For Kernel "2.6.33.4-smp" ... For Mkinitrd - Encrypted Installation
Jul 22, 2010I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
Fedora :: Switch From The I686 Kernel To I386 Without Reinstalling The System?
Aug 2, 2011One of our F14 machines was originally set-up with the i386 Kernel. I found out it had a kernel crash and the person tried to fix it by reinstalling the kernel, unfortunately they installed i686. Now some of our software that was setup to work with i386 is not cooperating. Is there a way to switch from the i686 kernel to i386 without reinstalling the system?
View 1 Replies View RelatedFedora X86/64bit :: F12 Kernel Update Lost Radio Kill Switch Functionality / Bluetooth?
Dec 7, 2009Initial FC12 install worked great, kernel 2.6.31.5-127.fc12.x86_64 allowed radio kill switch functionality Fn-F11 for wlan and Fn-F12 for bluetooth.The last two kernels have broken that functionality.
Fedora (2.6.31.6-162.fc12.x86_64) broken!
Fedora (2.6.31.6-145.fc12.x86_64) broken!
Fedora (2.6.31.5-127.fc12.x86_64) works!
[code]...
Slackware :: Compile 2.6.37 Kernel Patched With The Autogroup Patch On A Slackware 13.1 System?
Jan 13, 2011it's possible to compile the 2.6.37 kernel patched with the autogroup patch on a Slackware 13.1 system running 2.6.33.4-smp with 2.6.33.4 headers? I just compiled and installed the 2.6.37-autogroup kernel from AUR on my ARCH setup and I like it especially when using firefox with lots of tabs open and other background apps also running. I did notice a speed and smothness difference in my ARCH testing setup with this kernel patch and I can get same results in 13.1??
View 1 Replies View RelatedSlackware :: Slackware 13.1 VIA VT1708S Audio Driver - Get Working Without Rebuilding The Kernel?
Jun 23, 2011I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
View 5 Replies View RelatedSlackware :: Can't Boot Updated Kernel Slackware Current
Jan 5, 2010I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies View RelatedSlackware :: HDMI Sound After Building A New Kernel ( Slackware 13.1 )?
Aug 21, 2010I'm currently trying to install unRaid on Slackware following this tutorial :[URL].. I'm new to Linux and after many hours, i finally managed to build the new kernel for unRAID (2.6.32.9). But audio on HDMI port doesn't work I tried alsaconf without success. HDMI sound works when i boot into the old kernel.
My codecs are :
Code:
root@unraid:~# cat /proc/asound/Intel/code* | grep Codec
Codec: Realtek ALC888
Codec: Intel G45 DEVIBX
Code:
lspci -v:
[Code]...
Fedora :: Change Kernel From Kernel-PAE To Kernel?
Jan 18, 2010My laptop has only 2GB of RAM so I don't think I need the PAE kernel, also there are some drivers that I want to install, they were built for non-PAE kernel.
So far I read that I have to change the :
/etc/sysconfig/kernel
---------
# UPDATEDEFAULT specifies if new-kernel-pkg should make
# new kernels the default
UPDATEDEFAULT=yes
[Code]....
Slackware :: Way To Add Kernel To Iso
Oct 30, 2010Is there some way to add a kernel to an iso?
Or update the one on the iso?
I am trying to install Slackware(x32) 13.1.
EDIT: forgot to mention, I'm on windows 7. no access to linux outside of a vm.
Debian Configuration :: Is It 64bit Kernel Or 32bit Kernel Optimized For Amd64 Architecture?
Jan 24, 2010I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
View 12 Replies View RelatedFedora :: Nvidia 8600m Gt Driver Fc12 - Kernel Automatically Will Change To Be A Pae Kernel?
Jul 4, 2010my problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??
View 10 Replies View RelatedOpenSUSE :: Virtualbox Problems (Error Kernel Headers For Kernel 2.6.34-12-desktop Cannot Be Found At)?
Jan 2, 2011I'm just installed OpenSuse 11.3 (64) on a 30gb SSD, hoping to get virtualbox 4.0 running to virtualize an instance of Windows 7.I went through some pain with my Nvidia video card and actually getting vb to install, but through lots of searching and tinkering got here.I created a vm in the vb control panel, but when I go to start it I get:
Code:
Failed to open a session for the virtual machine Win7Main.
The virtual machine 'Win7Main' has terminated unexpectedly during startup with exit code 1.
[code]....
OpenSUSE Install :: 11.2 From DVD - Load Kernel Operation Hangs At 97% (using Both Normal And Safe Kernel)
Feb 23, 2010I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
Debian :: Automatic Removal Of Kernel Headers Package When Kernel Packages Are Removed
Dec 28, 2008As a follow-on to something Telemachos said in another post:
Quote:
Originally Posted by Telemachos
You can see what kernels you have installed - to check if you have a virtual kernel and to clean up - by running this command:
Code:
If you've been installing kernel-headers along with the kernels (say to build modules for graphics or wireless), you should remove those when you remove the corresponding kernel. The command to search for those is parallel:
Code:
I would have thought that removing a given kernel package would trigger the removal of the older kernel headers. Can someone confirm that is, or is not, the behavior? I ask this because it seemed to me that the older kernel header packages were indeed removed when I removed some older kernel packages.
For example, the linux kernels I have installed are:
Code:
Also, the linux-headers packages I have installed are:
Code:
So, when I get around to removing the linux-image-2.6.25-2-amd64 package like this:
Code:
I would expect apt-get to automatically also remove linux-headers-2.6.25-2-amd64 and linux-headers-2.6.25-2-common. Is that what will happen, or do I need to explicitly state all three packages on the apt-get remove command?
General :: Debian 686 Kernel Total Networking Failure On IbmX60 But 486 Kernel Works
Feb 11, 2011The 486 kernel works just fine, and while I have only 1GB of RAM at the moment I hope to have 2GB someday and would like to take advantage of the dual core CPU, so I would like to configure grub to run the 686 kernel by default. For whatever reason, it runs the 486 right now and the 686 fails in a major way: there is no network connectivity at all. It could be plugged into my cable modem router and it shows no wired connections. The fact that one works and the other doesn't puzzles me since I haven't touched either since the install and a few rounds of upgrades.
I should mention I'm newbie but getting better; I managed to install debian on this x60, yet while preserving the factory install rescue & recovery partition and preserving the factory install MBR so that ibm-specific hardware functions (thinkvantage button, etc.) still work. This required me to use dd to copy the first 512 bytes of my debian partition to a file in the windows partition, etc., and modifying the windows bootloader. (I wish I had learned dd long ago--it rocks). I did this because if I ever resell the X60, the fact is most people use MS Windows and having that partition adds a perception of value to some potential buyers; not to mention I paid $ for it (I was young & stupid) so why should I delete it. I also backed up the recovery partition on another drive using dd over NFS in case the hd ever heads south.
Anyway, I've never been comfy with messing with the kernel. I did once recompile a module for ALSA because it had a bug in it for an old Yamaha integrated sound card on an old PIII and the newer version worked [alsa fails on this x60 too but I think I found a post on here that has a solution I will try later]. But I'm clueless as to networking modules, not to mention the correct module is installed already from Intel for this chipset. So what is there to do?
Here's a clue: the ifconfig output is radically different from the 686 and 486 kernels. Looks like hardware is not being detected since eth0 fails to show:
I would show the diff output below if it weren't so long--and not allowed--upon 2 text files, the first holding the output of modprobe -l under the 486 kernel and the second under the 686 kernel.
Red Hat :: Install Ethernet Adapter Driver - Not Finding Kernel-devel Or Kernel-headers
Aug 30, 2010I'm attempting to install the driver for my atheros AR8131 PCI-E Gigabit Ethernet adapter (in my Lenovo laptop) on my newly installed RHEL5 system (it's not currently being recognized).
I tried using: 'make install' but hit an error "Makefile:61: *** Linux kernel source not found."
After this, I tried: 'sudo yum install kernel-devel kernel-headers'
To rectify this, but hit this error "No package kernel-devel available" (and the same for the headers). What should I do?
Debian Configuration :: Update My Kernel From 2.6.32 To 2.6.38 - Error - Unable To Boot Into The Kernel
May 13, 2011I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies View RelatedFedora :: 0 Byte Initrd File In Kernel Kernel-2.6.27.25-170.2.72.fc10.x86_64
Jul 13, 2009I'm I seeing this wrong or is the initrd file in kernel-2.6.27.25-170.2.72.fc10.x86_64 a zero byte file and that's why I can't boot with it( get this "kernel panic not syncing VFS unable to mount root fs on known -block (0,0)" message)
View 2 Replies View RelatedFedora Installation :: Errors For VirtualBox / Kernel Source For Kernel 2.6.32.11-99.fc Cannot Be Found?
Apr 21, 2010Trying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.6
Deleting module version: 3.1.6
completely from the DKMS tree.
Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source ->
/usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found
at
/lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12.
code....