I would like to update my kernel to version 2.6.32 to see if it solves my tv-tuner card issues (not being recognized by the kernel Lenny uses 2.6.26-2 x64). What steps should I follow to accomplish this upgrade?
View 4 RepliesWas wondering if I can upgrade my kernel to squeeze without affecting or hurting my Lenny system?
I want to upgrade the kernel, but leave the system as stable lenny
I know the more recent kernels have better wireless detection,etc
i'm using this guide videos - howto: debian linux kernel compilation, part 1 and the author says i need kernel 2.6.26 this version of kernel doesnt longer exist in kernel.org website and the only 2.6.26 i found is a patch here. should i use the patch? or download another version of kernel?
View 2 Replies View RelatedI am using Lenny kernel version 2.6.26-2-686.I am trying to install some drivers and they need kernel source. I installed kernel source through Synaptic, but the driver installer doesn't find it at the place it expects.
1) Where does Lenny keep the kernel source?
2) Are the kernel sources from Debian and www.kernel.org the same?
3) If I want to download the kernel source manually, where do I get it from?
I just wanted to know if i download Debian Squeeze linux-source-2.6.32 from packages.debian.org and try and compile it in debian lenny using lenny's packages will the build succeed ?
View 6 Replies View Relatedis it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...
View 14 Replies View RelatedI just installed the lenny (amd64) on my new core i7 870 computer (with netinst), but the kernel failure message appeared everytime I booted into gnome. I don't know how to solve this problem. Sorry I don't have much experience with installing linux, though I have been its user for a few years.
View 4 Replies View Relatedi recently buy an MSI 770-45 motherboard with 4gb (2x2gb) Gskill 1600Mhz Ram. The CPU is an athlon2 x4 620, everything tested and working fine except i can`t get lenny or squeeze 64bit linux running because of kernel panics when creating ext3/ext4 partitions during install or running fsck on the system i installed on another PC and moved to this one. The boot shows a screen related to IOMMU problem saying must enable it in bios but no option related to it and no memory remapping also. The question is how i can get IOEMMU working with 4gb of RAM (if i remove one of the two modules everything is fine). I`ve tryed ioemmu=memapper/off/noagp/soft and any thing i found on the web, moving to test debian installation was my last hope really before starting to use the 32bit one, i am planning to add more RAM which with this version is just can`t be.
View 3 Replies View Relatedi'm trying to get my WLan working, i do have a Broadcom BCM4312 lpphy WLan-Adapter (pci-id according to lspci -vnn is 14e4:4315) in my Lenove ideapad S12. My System is Debian Lenny, but in order for the WLan-Adapter to work I installed the 2.6.32-3-686 Kernel from debian squeeze (using apt-pinning). I than installed the b43-firmware as described in the debian wiki [URL]. I updated the init-ramfs, everything is working as expected, except for WLan.
It shows up using iwconfig, i can get it up and down using ifconfig (or ifup, ifdown). I can't do a scan using iwlist - it says: % iwlist wlan0 scan > Failed to read scan data : Resource temporarily unavailable
It always fails, but not with the same error message. Sometimes it also comes up with > device or resource busy
Using dmesg I see reports about a fatal DMA error, resulting in a controller RESET. It says it's loading firmware 478.104 .
I recently got a new dell studio 1558 with radeon hd 5470 video card. So far have had lot of small problems and such but been able to fix the via google and a lil luck but now I'm stumped with this one and decided to try and turn here for some possible help. Now on to the details.
Distro - Debian lenny with 2.6.33.3 custom kernel propriatory lgrfx 10.4 drivers installed direct from ati (installed no problem)after compiling the kernel and installing the drivers from ATI my card IS recognized and X will boot up with the proper resolution, but that's where all the problems start. I can no longer switch to virtual terminals (ctrl-alt-F1,F2,F3,F4 etc) and graphics performance in X is extremely poor due to the fact that 3D fails to initialize, and catalyst control fails to load (it tries to but then just disappears)
I have attempted to install kernel 2.6.34 and 2.6.33 kernels with this Debian howto [url] Everything worked without any errors until I went to boot into the new kernel. When I receive this kernel panic output Kernel panic - not syncing VFS: unable to mount root fs on unknown-block(0,0)
It also spits out something about being unable to access ext2 FS. I googled this symptom and have seen that it is fairly common, but everyone's error seems somewhat unrelated. I used the same kernel configuration as the one that is currently working, to keep things simple.
And here is what my menu.list looks like:
I used Backtrack 5 and Fedora, basically I'm trying to install my wireless card but I don't have these installed to make && sudo. I burned the iso images for backtrack and fedora and booted my computer from them but can't figure out how to install kernel-devel on backtrack for example. I dled yum onto my flash drive but can't figure out how to install it.
View 14 Replies View RelatedWe have a Dell 1850 with Debian with 2.4.18 kernel running some critical applications, now the issue is we need to upgrade the memory to 8 GB but the memory is detected by the bios itself, Operating system is not able to detect it, it is showing 3096MB of memory,
After a lot of googling and the artical in linux.com/archive/articles/119287 :: Got more than a gig of RAM and 32-bit Linux? Here's how to use it i came to know the solution i.e
1)I need to install the Bigmem-kernel to detect the ram more than 4Gb,
2) or change some kernel parameters in configuration file and rebuild the kernel
Is there any another solution for this to update operating system to detect the more RAM
We have a Dell 1850 with Debian 3.0 (woody) with 2.4.18 kernel running some critical applications, now the issue is we need to upgrade the memory to 8 GB but the memory is detected by the bios itself, Operating system is not able to detect it, it is showing 3096MB of memory. i came to know the solution i.e I need to install the Bigmem-kernel to detect the ram more than 4Gb, Any another solution for this to update operating system to detect the more RAM.
View 6 Replies View RelatedSo, I did the upgrade to Jessie today and everything went fine and I do like the gray look of the Gnome Classic Desktop. Not much change here.
But it is impossible for me to install the 3.16 kernel.
When I try, I get the following error (sry, it's german, but you should get the point):
Code: Select allE: /var/cache/apt/archives/linux-image-3.16.0-4-amd64_3.16.7-ckt9-3~deb8u1_amd64.deb: Extrahierte Daten für »./lib/modules/3.16.0-4-amd64/kernel/drivers/media/rc/winbond-cir.ko« können nicht nach »/lib/modules/3.16.0-4-amd64/kernel/drivers/media/rc/winbond-cir.ko.dpkg-new« kopiert werden: Es konnte nicht geschrieben werden (Auf dem Gerät ist kein Speicherplatz mehr verfügbar)
It basically says, there is not enough space on /lib to copy the modules for the new kernel. (I have about 100M free there.)
df -h says:
Code: Select all/dev/dm-1 322M 209M 97M 69% /
udev 10M 0 10M 0% /dev
/dev/dm-2 8,3G 5,6G 2,3G 72% /usr
/dev/sda1 228M 28M 188M 13% /boot
/dev/mapper/linux-var 2,8G 577M 2,1G 22% /var
/dev/mapper/linux-tmp 368M 11M 339M 3% /tmp
/dev/mapper/linux-home 58G 55G 628M 99% /home
So, as you can see, there isn't that much space on / at all - don't blame me, blame the Lenny Installer. Personally I can live with the 3.2 kernel but I wonder if there is any possibility to install the never one without a total re-partitioning.
My girlfriend got a 'new' (second hand) laptop, a HP Compaq 6715s. When I tried to install Debian on it, the install went immensely slow - glacial, even. It was a very minimal install but it tooks hours to get to nowhere.
I found out online that this was because of a problem between the current kernel and the hard drive (or HD bus, something hardware-y to do with the disk) which meant file operations were extremely slow. I thought "easy, patiently install Debian and then install newer kernel". Except that after six hours, the install wasn't even halfway.
So I install Arch Linux with the 2.6.35 kernel: no problems with the drive speed at all. After a lot of researching (I only played around with Arch once, more than a year ago) I got the system into a usable state. But now wlan0 has suddenly disappeared, together with some other problems - and a usable laptop wasn't exactly what I had in mind, it was supposed to be awesome (or at least good). Which, with Debian, it would be
So... is it possible to make a Debian installation use a later version of a kernel? I'd want to install Debian with the 2.6.35 kernel, not install Debian and then afterwards update the kernel (because I don't have 24 hours to install an OS, if it'll ever even install).
I've found some stuff online but it might well have been written in the Cyrillic alphabet. All I understand, I think, is that in theory it's possible.
i downloaded the latest stable release of the linux kernel 2.6.39 and i did the following ran the command
Code:
make xconfig
and there were no errors so far so good
then i ran
Code:
make in the mix of all the command line and characters one of the lines said
Code:
stack protector enabled but no compiler support because of this the rest of the installation process is not going well i am unable to install the new linux kernel successfully. the kernel shows up on the grub boot menu but goes into a kernel panic when i try to boot it. how do i compile the new kernel in debian squeeze
I'm trying to install vmware server 2 on my lenny and first I must install the kernel headers but I'm having troubels with it.
apt-get install linux-headers-`uname -r`
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package linux-headers-2.6.28.9
I have even tried with apt-get install linux-headers-2.6.28.9 but same thing Searching apt-cache search linux-headers-2.6.28.9 shows nothing.
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
View 12 Replies View RelatedAs a follow-on to something Telemachos said in another post:
Quote:
Originally Posted by Telemachos
You can see what kernels you have installed - to check if you have a virtual kernel and to clean up - by running this command:
Code:
If you've been installing kernel-headers along with the kernels (say to build modules for graphics or wireless), you should remove those when you remove the corresponding kernel. The command to search for those is parallel:
Code:
I would have thought that removing a given kernel package would trigger the removal of the older kernel headers. Can someone confirm that is, or is not, the behavior? I ask this because it seemed to me that the older kernel header packages were indeed removed when I removed some older kernel packages.
For example, the linux kernels I have installed are:
Code:
Also, the linux-headers packages I have installed are:
Code:
So, when I get around to removing the linux-image-2.6.25-2-amd64 package like this:
Code:
I would expect apt-get to automatically also remove linux-headers-2.6.25-2-amd64 and linux-headers-2.6.25-2-common. Is that what will happen, or do I need to explicitly state all three packages on the apt-get remove command?
The 486 kernel works just fine, and while I have only 1GB of RAM at the moment I hope to have 2GB someday and would like to take advantage of the dual core CPU, so I would like to configure grub to run the 686 kernel by default. For whatever reason, it runs the 486 right now and the 686 fails in a major way: there is no network connectivity at all. It could be plugged into my cable modem router and it shows no wired connections. The fact that one works and the other doesn't puzzles me since I haven't touched either since the install and a few rounds of upgrades.
I should mention I'm newbie but getting better; I managed to install debian on this x60, yet while preserving the factory install rescue & recovery partition and preserving the factory install MBR so that ibm-specific hardware functions (thinkvantage button, etc.) still work. This required me to use dd to copy the first 512 bytes of my debian partition to a file in the windows partition, etc., and modifying the windows bootloader. (I wish I had learned dd long ago--it rocks). I did this because if I ever resell the X60, the fact is most people use MS Windows and having that partition adds a perception of value to some potential buyers; not to mention I paid $ for it (I was young & stupid) so why should I delete it. I also backed up the recovery partition on another drive using dd over NFS in case the hd ever heads south.
Anyway, I've never been comfy with messing with the kernel. I did once recompile a module for ALSA because it had a bug in it for an old Yamaha integrated sound card on an old PIII and the newer version worked [alsa fails on this x60 too but I think I found a post on here that has a solution I will try later]. But I'm clueless as to networking modules, not to mention the correct module is installed already from Intel for this chipset. So what is there to do?
Here's a clue: the ifconfig output is radically different from the 686 and 486 kernels. Looks like hardware is not being detected since eth0 fails to show:
I would show the diff output below if it weren't so long--and not allowed--upon 2 text files, the first holding the output of modprobe -l under the 486 kernel and the second under the 686 kernel.
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies View RelatedI am trying to upgrade a server I was put in charge of and keep running into a loop of errors.
uname -r
2.6.11.12
When I do apt-get -f install I get the error: WARNING: this version of the GNU libc requires kernel version 2.6.18 or later. upgrade your kernel before installing glibc.
Then when I try installing the kernel I get the error: You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies
[code]....
I am not new to Debian and used to use commands like "apt-get install <package>", "apt-get update", "apt-get upgrade" and "apt-cache search <string>" regularly. But I never understood those Debian programs and the Debian package system with it's numerous programs and way to install things and work on software and configurations. Now, I just wanted to do something that I thought to be really easy. Get the source of an existing package. And despite spending over 3 hours - including reading the man-pages of commands - I cannot find a way!
Two things:
dpkg --get-selections | grep openvz
linux-image-2.6-openvz-amd64 install
linux-image-2.6.26-2-openvz-amd64 install
I already don't understand why I have two such packages installed. I would like to download the source of my kernel: apt-get source linux-image-2.6.26-2-openvz-amd64. This downloaded linux-2.6_2.6.26-21lenny4.dsc, linux-2.6_2.6.26.orig.tar.gz and linux-2.6_2.6.26-21lenny4.diff.gz
Then, I wanted to patch this - having found no explanation, I did:
cd linux
patch < ../linux-2.6_2.6.26-21lenny4.diff
That seemed to patch the kernel. But I am not sure - there are new files like this now_
[...]
Only in linux-2.6-2.6.26: xenctrl-capabilities.patch
Only in linux-2.6-2.6.26: xenctrl.patch
Only in linux-2.6-2.6.26: xenctrl-privcmd.patch
[...]
So, how can download the complete Debian kernel source? And what do I need to be able to compile it? And - HOW to just list all available sources and search in them?!? I found lots of webpages where tools like "make-kpkg" are used, which I do not understand again. Under SuSE, I could just select the package from a list, say "make oldconfig install modules modules_install" and be ready. Under Debian, I just find no way ...
I'm using the liqorix kernel and have been updating when new versions become available. However, every time I install a new version and restart, I have to re-install my video drivers. I don't think this is normal, but I could be wrong, I'm basing my past experience on updating Ubuntu kernels. So is this normal? Is there a way I can prevent myself from having to re-install my video drivers every time I update my kernel?
View 3 Replies View RelatedI have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies View RelatedI installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I need to install any version of Debian with the Debian Kernel version 2.6.22-3-686. I don't mind what version of Debian it is, I just need it to have this specific kernel! Debian Etch comes with 2.6.18-4-686 and Lenny comes with 2.6.26-2-686 so the kernel I need is obviously somewhere in between.
I have tried using the following commands to see if kernel 2.6.22-3-686 is available for download via the apt-get method in both Debian Etch and Lenny but it is not...
apt-cache search linux-kernel
apt-cache search linux-source
So does anyone know where/how I can download specific kernels and install them for use? I have a computer sitting next to me that has multiple kernels as an option on boot, and they all boot into the same system, however I do not know the person who set up the computer so cannot ask them how they did it
I'm trying to build the package zaptel on debian, but I'm encountering two errors:
1- When I try to run the "make menuselect" command, I get an error stating that I need ncurses which is missing. I tried to get it installed but didn't get to do it yet.
2- After that, there's the command "make" I think it's to build the package. Yet again this fails, and the error I get is "you do not appear to have the sources for the 2.6.26-2-686 kernel installed".
I'm trying to install Atheros AR9485 wireless card driver on debian, and I had no luck.
I followed this [URL] .... to install backports kernel version. The wireless card worked, however, intel display driver displayed the color in the wrong way.
Red pixels are green, and green are yellow. It was displayed like when someone try to connect a PAL system to a TV that supports only NTSC.
This is my lspci output:
Code: Select all00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Device 0a0c (rev 09)
00:14.0 USB controller: Intel Corporation Lynx Point-LP USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation Lynx Point-LP HECI #0 (rev 04)
[Code] ....
Is there is a way to compile only AR9485 module from the kernel?
Add the following
Code: Select alli915.i915_enable_fbc=0 to your GRUB_CMDLINE_LINUX_DEFAULT= in /etc/default/grub so you would have something like that
Code: Select allGRUB_CMDLINE_LINUX_DEFAULT=" i915.i915_enable_fbc=0 nomodeset quiet splash"