Slackware :: Ntfs-3g Error After Kernel Upgrade To 2.6.35.4?
Aug 27, 2010
I was running 2.6.35 without any errors. I decided to upgrade to .4 today, used the same config. After i rebooted into the newly compiled kernel i got these errors on boot..
Code:
Mounting non-root local filesystems:
ntfs-3g: Failed to access volume '/dev/sdc1': No such file or directory
ntfs-3g 2010.3.6 integrated FUSE 27 - Third Generation NTFS Driver
Configuration type 1, XATTRS are on, POSIX ACLS are off
Copyright (C) 2005-2007 Yura Pakhuchiy
[Code]...
I did a complete disk check and it appears to be fine. Then i booted in the default kernel that comes with slackware 13.1 and walla..No errors! What could be the problem? Did someone experience the same issue?
View 2 Replies
ADVERTISEMENT
May 15, 2011
I upgraded to Xfce 4.8 following instructions: [url]
Everything is fine except for my ntfs usb drives are read-only.
udisks reports that the drive mounted is not read only:
Code:
mtab is showing that the drive is also rw
Code:
However when I try to create a new file or folder on the drive in Thunar, I get:
Code:
Or ...
Code:
Permissions on the mounted folder are as follows:
Code:
View 3 Replies
View Related
Apr 17, 2011
People, there is a tutorial to upgrade the kernel 2.6.38.3(compiling tutorial included =D) to Slackware 13.1??And, this upgrade generate a better performance on system??
View 14 Replies
View Related
May 5, 2010
can I upgrade the kernel on my slack 12.2 to the version 2.6.29 or higher?I need the kernel must support the KMS mechanism.Why I need KMS? I want to define virtual screen of size greater than 2048 x 2048. Why I need so huge virtual screen?To run two-display configuration on my dual-head Intel graphic card. At the moment I can set max 2048 x 2048 virtual screen which is not enough for my two displays:LCD of notebook has 1400 x 1050 resolution, and external LCD panel 1280 x 1024. At this moment a part of desktop is on both displays. Small part but causes some problems, and at this moment only awesome (really awesome) window manager can handle this configuration.
View 9 Replies
View Related
Mar 14, 2011
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
View 9 Replies
View Related
Apr 10, 2011
I upgrade my slackware to slackware-current. But, when I look /etc/rc.d/rc.modules, it's still symlink to old kernel. Is this normal? Or i must change the symlink manually?
[Code]...
View 2 Replies
View Related
Jun 1, 2010
How you doing all? I've my Slackware 13 box. Recently, I have upgraded to -current, and while the upgrade I noticed that my connection went down while it was downloading the new kernel. I had doubts that it got damaged.
Code:
slackpkg upgrade-all and found every thing is up to date. While upgrading, the system asked me to run lilo, and I did. But after rebooting, I got the (Kernel Panic) error. I logged back in using setup disk, and the chroot to my original system root directory. I removed the current Kernels, and now I need to re-install it.. there I'm stuck. Slackpkg isn't working because the box is not connecting to the internet. or links is more than appreciated since I'm not geek enough to sort it by my own. Also few googling didn't set me up with a solution so far.
View 9 Replies
View Related
Jan 29, 2010
I noticed that slapt-get excludes a lot of package titles based on aaa, glibc, and kernel. I've been wondering why, and haven't been able to find any definitive answers... Anyone here have any ideas on why that is? My Slackware installation is currently kernel 2.6.29.6 (I think) and the newest available on the official repositories is 2.6.32.5 (or something like that).
When I put in slapt-get --upgrade it spits out about 15 packages that are excluded that it won't upgrade. Now, I know I can remove the exclusions by editing the slapt-get configuration file, but I don't want to if it's going to screw something up. So my question is: Is there a reason those are excluded? Is it unsafe to upgrade the kernel with slapt-get?
View 8 Replies
View Related
May 24, 2010
I have a zyxel dsl (usb) moden, which needs a firmware portion to work, called cxacru-fw.bin.
I have been using this modem using with at least two different slackware distributions, even when the atm drivers were not included in the kernel.
Presently I am using slackware 13.0, with the vmlinuz-huge-smp-2.6.29.6-smp kernel.
I downlowded the 2.6.34 kernel, because I need it for a new webcam, compiled and installed it, and oops! the modem does not work anymore.
I am pretty sure I have configured the kernel correctly; dmesg tells me the modem is recognized by the kernel, as it is with the previous one, but the firmware is not loaded, because the DSL led remains off.
I attach the kernel configuration lines:
I have tried forcing the kernel to load the firmware, using but it didn't work either.
View 1 Replies
View Related
Mar 28, 2010
I have changed kernel to 2.6.33. After that ifconfig command shows only my ethernet card, wireless card have disappeared. What is wrong. In the old kernel everything works fine. I am sure that i have installed wi-fi stuff with kernel.
View 14 Replies
View Related
Mar 15, 2010
I've just seen a strange set of error code during my boot sequence:
WARNING: at mm/page_alloc.c:1813 __alloc_pages_nodemask+0x5ce/0x6c0()
Hardware name: MS-7250
Modules linked in: lp fuse nvidia(P) joydev snd_cmipci gameport rtc_cmos rtc_core thermal processor snd_pcm snd_page_alloc snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore thermal_sys i2c_nforce2 rtc_lib button agpgart k8temp hwmon psmouse sg i2c_core ppdev parport_pc parport forcedeth serio_raw evdev
Pid: 1543, comm: mount Tainted: P 2.6.33 #2
Call Trace: .....
The machine appears to run normally otherwise.
View 4 Replies
View Related
Jul 12, 2011
You can see it here. What to do... What to do? Error When Updating Respiratory - Upgrade to 2.6.39.0 Kernel?
View 3 Replies
View Related
Jul 12, 2010
I have Slack 13.1 64 bits. I compiled my Kernel 2.6.34.1 The Kernel has start normally but I found this message:
[Code]....
View 4 Replies
View Related
Aug 4, 2011
I want to upgrade my kernel from version 2.6.38-10 to 3 I downloaded the kernel 3 from kernel.org by this command :wget url while i'm in /tmp directory
and i did these commands also
$ tar -xjvf linux-2.6.25.tar.bz2 -C /usr/src
$ cd /usr/src
till now everything is okay so now the next step as my manual
$ make gconfig
that's give me this result
*
* Unable to find the GTK+ installation. Please make sure that
* the GTK+ 2.0 development package is correctly installed...
* You need gtk+-2.0, glib-2.0 and libglade-2.0.
*
make[1]: *** No rule to make target `scripts/kconfig/.tmp_gtkcheck', needed by `scripts/kconfig/gconf.o'. Stop. make: *** [gconfig] Error 2
and the gtk+ is installed correctly but don't know what's wrong exactly .
View 2 Replies
View Related
Jul 22, 2010
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
View 5 Replies
View Related
Jan 29, 2010
I got a notification that there was an upgrade available today in ubuntu 9.10 64, after the update i restarted my system and while booting i encountered this error message:
Kernel panic - not syncing : VFS : Unable to mount root fs on unknown - block (8,17)
does this have something to do with the OS looking at the wrong hd?
theres no command prompt to actually do anything and i tried booting in safe mode and had the same problem. Let me know what i can do!
View 3 Replies
View Related
May 21, 2011
I was about to do upgrade from 11.3 to 11.4.I was following the guide I found in opensuse's website. I was to the point where I had to disable all 11.3 repositories and add the 11.4 at that point I forgot to change my nvidia repository ( I have a g210m graphic card).
thus after the upgrade the X could not start at all. I think this was because Yast could not find the nvidia driver.
Using text mode YaSt2 I added the nvidia driver but after restart I can not see and X running. I receive an error message that the current kernel can not be loaded!!!
I also checked in command line if there is something like Sax2.. but I couldnot find anything.
View 6 Replies
View Related
Jul 1, 2011
I'm currently trying to setup Slackware 13.7 on a server, using software RAID 1. I'm using the README_RAID.TXT document at the root of the Slackware disc as a reference. Anyway, here's what I have so far.
/dev/md1 -> /boot partition
/dev/md2 -> swap partition
/dev/md3 -> / partition
Code:
[root@raymonde:~] # fdisk -l /dev/sd{a,b}
Disk /dev/sda: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders, total 80293248 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
I created an initrd image using mkinitrd -F, added an according stanza to /etc/lilo.conf and ran 'lilo' after that. Now I can boot on the vanilla huge kernel all right. But I can't seem to boot on the generic kernel. Whenever I try to do this, the boot process stops short on the following error message:
Code:
mount: mounting /dev/md3 on /mnt failed: Device or resource busy
ERROR: no /sbin/init found on rootdev
View 5 Replies
View Related
May 29, 2010
The server runs# uname -r2.6.18-128.4.1.el5However, today I executed yum update kernel*due to security advisory. I was just about to reboot the system when I realized that it runs VMWare Server Instance that will most likely fail to restart after kernel upgrade (I had a hard time fixing it after previous kernel update). Now I want to keep 2.6.18-128.4.1.el5 after reboot.I see that new kernel is scheduled for booting:
# cat /etc/grub.conf
default=0
timeout=20
[code]....
View 10 Replies
View Related
Jun 20, 2010
I installed a fresh copy of Slackware 13.1 (stable) on one of my media servers and I am experiencing something strange.... When I power up the machine, I see the kernel booting, no errors, until it gets to the point where it says:
And then randomly freeze there.... Well the machine is not totally frozen because the cursor still blinks. But it will never continue... Like I said, this happens on a random basis... After a reset, it might go through or simply stall at the same spot.
I remember after installing Slack 13.1, I rebooted the machine but forgot to remove the DVD from the player, so the install routine started up, and froze at the same point when it was loading the kernel for the setup programs...
My mobo is a MSI k9N platinum.
I never had this problem before.... (well I never used 13.1 before). Since I got this machine, I used slack 12.2 and slack 13-current with success.
This problem makes the machine extremely unreliable because I intent to use it as a backup and media server, so chances I will WOL the machine and use it remotely... if that happens.
View 10 Replies
View Related
May 25, 2010
After a motherboard change in my pc, I would like to dualboot Slackware 13 with WinXP. In the old system, (dualboot Win2K-XP), I had "My Documents " on a separate disk, as it was used by both OS's. In the new system, I would again like to share this between the 2 operating systems. (both clean install) --> Is it possible to use the existing NTFS disk as the /home in Slackware?
For the Linux side, I am planning 4 partitions on 3 separate HD's:
View 4 Replies
View Related
Jan 20, 2010
I have one machine where I have several versions installed on different partitions. The base partition (/dev/hda1) is Slack 12.1. On a spare partition (/dev/hdc4) I had installed Slackware64-current. Last week I slackpkg upgraded and installed the 2.6.32.2 kernel, and now that partition will not boot. I know that with the new kernels the hd* designation has been removed, and have already redone that fstab (accessing it from a different boot) to reflect the sd*. Here is the slack64 section of my lilo.conf:
Code:
# Linux bootable partition config begins
image = /other/spare4/boot/vmlinuz
[code]....
View 4 Replies
View Related
May 10, 2010
A more comprehensive phrased question since I lost access to the other one.I would ask that the other one be deleted, not this one, as it should not have been migrated in the first place.There are currently two NTFS drivers available for Linux.
The NTFS driver included in the kernel, and the userspace NTFS-3G driver that makes use of FUSE.By all accounts, NTFS-3G works perfectly.My question then, is if the NTFS filesystem has been successfully reverse engineered, why have the kernel NTFS team not implemented the changes in their driver? At the moment it is still marked as experimental, and there is a good chance it will destroy your data.
View 2 Replies
View Related
Apr 30, 2010
I have a partition on my hard drive that i use for documents. In 9.10 i would just click on places, and then on the partition name. It would ask for my password and i would be able to access the files. I just upgraded to 10.04 and first off i do not see the partition at all. I navigated to filesystem>media and found my partition but i has a gray X on it. I did gksu nautilus and when i access the folder, there is nothing inside.
View 7 Replies
View Related
May 30, 2010
Two ntfs partitions appear to be blank, after an apt-get upgrade in Kubuntu Lucid.The partitions are on two separate drives, so I doubt this is a hardware issue.
Main drive (sata):
/dev/sdb1 - NTFS - Main Win7 partition, appears blank
/dev/sdb5 - EXT4 - Linux root partition, functioning normally.
[code]...
View 2 Replies
View Related
Jul 9, 2011
Can Slackware 13.37 write on Win7's NTFS? I'm dual-booting and I've been thinking upgrading to Win7. I need to write to the Windows partition from Slackware and the NTFS-write compatibility will affect my decision.
View 4 Replies
View Related
May 23, 2015
I've just upgraded my system and I'm having some issues to boot with the latest kernel (cf: [URL] ....)
Hopefully I can still use the previous kernel (vmlinuz-3.2.0-4-686-pae).
I'd like to watch a movie that is on an NTFS partition.
From gnome-classic, I went in Places->datas (name of my partition) and I get this error message:
Code: Select allFailed to open "/media/mb/datas".
Error when getting information for file '/media/mb/datas': Input/output error.
The result of a df -h gives me:
Code: Select all/dev/sda3 fuseblk 96G 60G 37G 63% /media/mb/datas
mb is the username I'm currently using.
Previously it was only trying to mount the partition (after asking for the root password) in /media/datas
Is it normal that now it tries to mount it only for my current user in another folder?
If I look in the /var/log/messages, I only see this:
May 22 23:53:06 Tieum-Latitude gnome-session[2092]: Thunar: Failed to open "/media/mb/datas": Error when getting information for file '/media/mb/datas': Input/output error
View 3 Replies
View Related
Dec 14, 2009
how can I check if my machine have the kernel-modules to mount NTFS? Running FC12
View 2 Replies
View Related
Jan 13, 2011
it's possible to compile the 2.6.37 kernel patched with the autogroup patch on a Slackware 13.1 system running 2.6.33.4-smp with 2.6.33.4 headers? I just compiled and installed the 2.6.37-autogroup kernel from AUR on my ARCH setup and I like it especially when using firefox with lots of tabs open and other background apps also running. I did notice a speed and smothness difference in my ARCH testing setup with this kernel patch and I can get same results in 13.1??
View 1 Replies
View Related
Jun 23, 2011
I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
View 5 Replies
View Related
