Well since tonight, after the upgrade to the latest current today, it was about a month I didn't upgrade, I cannot "git push" from my windows workstation (through msysgit shell)... I can pull, at least it tells me I'm up to date, but it keeps blocked on the 'push' command, returning only after a long timeout:
[Code]....
After applying the 31st Jan and 1st Feb updates to -current (32 bit), alt-tab to switch between windows is no longer working in kde. It seems to lock the desktop and then after a few seconds kde goes back to the login screen. If I disable all desktop effects then alt-tab works again.
View 10 Replies View RelatedI installed latest 64bit updates from current and it broke direct rendering for my radeon 9550 card using X11 drivers.Xorg.0.log:
Code:
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
[code]....
libgmp If you found slackpkg failed for this upgrade because of libgmp not found you will need to grab the gmp package and install manually. This way ought to work:
[Code]....
I just wanted to make sure the latest mdadm hasn't escaped the attention of the Slackware gurus for -current. I bet it hasn't I'm basically in the same situation as described here:[URL]...
View 2 Replies View RelatedX crashes and reports a segmentation fault, address nil. I've been using the generic Radeon driver without any problems, until now.
View 14 Replies View RelatedWith bash is there a way to push and pop the current working directory? I tried writing bash;cd dir; ./dostuff;exit; but the current directory is now dir.
View 2 Replies View RelatedI noticed this weekend that I began experiencing wireless issues with the NIC (Intel 5300) on my laptop. I have had no problems with the wireless using several Ubuntu versions. This began after I installed the packages associated with the Update Manager last Friday, which included the 2.6.32-25.43 kernel update. My wireless will drop out anywhere from 10 seconds to a couple minutes later after connecting to my router. Again, I have not have any wireless issues before. Below is the end of dmesg when I enable the device.
[ 1220.725229] Registered led device: iwl-phy0::radio
[ 1220.725372] Registered led device: iwl-phy0::assoc
[ 1220.725883] Registered led device: iwl-phy0::RX
[ 1220.726422] Registered led device: iwl-phy0::TX
[ 1220.749395] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1228.969542] wlan1: deauthenticating from 00:24:01:f5:b8:b0 by local choice (reason=3)
[ 1229.008433] wlan1: direct probe to AP 00:24:01:f5:b8:b0 (try 1)
[Code].....
I set up a git repository on the live site of my website using git init. Then I created the same repo on my local machine using git clone command. Then I made a few changes and committed them to on my local repository. Then I tried to use git push origin alongside the ssh path to my repository on the remote machine to update my live website. However, I noticed that git-push only changes the head of my git repository on the remote machine and it doesn't change any file.
In order to update my remote repository I have to issue the following command after I use git-push.
PHP Code:
git reset --hard HEAD
This is a two-step process for committing changes to the live site. I was wondering if it's possible to merge these two steps in one to make life a little bit easier?
Note that, I'm the only one working on this project (sometimes from my laptop, sometimes from my desktop), so I trust all the commits.
I need to run Windows XP on a virtual machine using my 64 bit Slackware -current box. Does anyone have a procedure for installing the non-free version of Virtualbox (USB support is a necessity), or failing that can anyone recommend another solution? The only virtualization software I've ever run has been Virtualbox.
View 2 Replies View RelatedI used qemu (qemu-0.9.1-i386-2_SBo) with Windows98SE as a guest, but since the last Slackware-current update of this version of qemu no longer works ...more precisely after "Mon Apr 8 06:58:48 UTC 2011" Update
Then installed the version "qemu-0.12.5.tar.gz" of Slackbuils, but this If the mouse is not detected in Windows 98 I also installed the version of the Alien "qemu-0.10.0-i486-1alien" without success Windows 98SE worked very well with the version of qemu-0.9.1-i386-2_SBo!I know the mouse is not detectable in Windows 98SE is a Bug [URL].. ps: I also have not had success in Slack 32. I use on a daily 64-bit version of Slackware .
has anyone the same problem with bash in -current? Everytime I use the commandline completition with TAB , it adds me a space, so I always need to push the backspace to continue to complete the path.So the whole thng get's a bit unuseable.I'm using bash-4.1.010-486-1 and bash-completition-1.3-noarch
View 4 Replies View RelatedHow can I generate a list of all current connections in the form ofhttp://rtmp://and the like?sitting behind a netgear router.
View 1 Replies View RelatedLet's say I have a Linux workstation at work, behind a firewall. So even though I may have a remote access server set up on it (such as the most excellent NoMachine NX Server), I can't access it from home.
My home network happens to have a Linux server. Is it possible to ssh from work to the home Linux machine and set up a tunnel so that once I'm at home, I can run the NX client, point it to my home Linux box on some port like 9000, and have that forward through the tunnel to port 22 on my work Linux box? How would I set this up?
I would like to know if it is possible to push or pull all Windows printers (about 1000) to Redhat Advanced Server? I know normally Samba comes into play, but there i can only make connection to 1 printer at the time. Also, I must then add the printers from the Windows Print Cluster by hand. Considering the huge amount of work AND the manageable aspects ( you will then have the printers on two servers), this is not an option.
So, can I connect from the RedHat server directly to the Windows Print cluster, or, if not, at least load all printers in the CUPS configuration at once? Then I have at least connection. It's a Windows 2003 R2 print cluster with RedHat 5.3 Advanced Server. Eventually the RedHat environment will be a cluster.
Usually we require vnc to take remote sessions. There was one another i think it was called xdrp or xrdp. I am asking this out of curiosity, is there any way to take remote sessions using http. Like in web conferencing, we invite users to join the conference and then we are able to share desktop. Is there any way to do this on one-to-one basis ? is such a technology exists for linux (for any disto) ?
View 1 Replies View RelatedIs there any way to keep a local install of Fedora current will all the latest releases? example If I'm running F13, is there a failsafe method to have F13 become F14 with out all the drama of reformatting and installing off the dvd? In the past all my attempts have failed, possibily due to having multiple repos is use and kernel patches applied (nvidia central).
View 8 Replies View RelatedI'd like to remotely administer my Linux machine at home whilst I'm at work. Only ports 80 and 443 are avaiable, through an HTTP proxy. I don't want to install tunnelling software.What I really need is something that'll run on my server and display a console inside a web browser.
View 3 Replies View RelatedI need to change the some configuration in httpd.conf file with out affect any current status of http service.
View 3 Replies View Relatedi have a problem........ How to redirect local http port to remote ip ddress(192.168.10.64) using iptables..my destro is Centos 5.3 my rule is this iptables -t nat -A PREROUTING -s 0/0 -d <my local ip> -p tcp --dport 80 -j DNAT --to-destination 192.168.10.64
View 1 Replies View RelatedHow to forward local HTTP requests to remote Proxy with IPTables ?
View 1 Replies View RelatedIs there a script which will take the patches subdirectory of the latest Slackware distribution tree, and substitute the new patch txz files for the ones in the slackware subdirectory so that during an ISO install, the latest txz will be used, instead, and the ISO will be minimized by not having the older ones?
View 6 Replies View RelatedI need to redirect all http/https/ftp traffic through the remote proxy, but when I changes connection settings in browser or in System->Preferences->Network Proxy it doesn't work well: instead of getting page content browser asks for saving some short (8 bytes) file with the same content for all requested pages. It happens in Chrome/Opera/Firefox. This proxy requires authorization and works on computer with Windos XP. It worked well when I was using Windows 7 and Proxifier, now I have Ubuntu 9.10 with all available updates.
View 3 Replies View RelatedSome time yesterday, I lost the ability to ssh my remote server, or even visit any webpages it hosts.
I've explored hosts.deny, /var/log/secure and even turned iptables off to see if it would fix anything. To no avail. Here's what my ssh login attempt looks like:
Quote:
localhost ~ $ ssh -vv x.x.x.x
OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
[Code]....
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies View RelatedI am trying to istall litb for P2020DS. I got an error the following error:
[hwtesting@HWLSRV1 ~]$ cd /home/hwtesting/ltib-p2020ds-20091119
[hwtesting@HWLSRV1 ltib-p2020ds-20091119]$ ./ltib
Don't have HTTP::Request:ommon
Don't have LWP::UserAgent
Cannot test proxies, or remote file availability without both
HTTP::Request:ommon and LWP::UserAgent
add folowwing line to User Privilage section:
hwtesting ALL = NOPASSWD: /bin/rpm, /opt/freescale/ltib/usr/bin/rpmvisudo
I edit the sudoers by visudo command and insert this line just under the following line:
root ALL = (ALL) All
But still I am getting the following:
Don't have HTTP::Request:ommon
Don't have LWP::UserAgent
Cannot test proxies, or remote file availability without both
HTTP::Request:ommon and LWP::UserAgent
I am trying to use a git repo over http on my Debian 5.0 machine.
The git repository is located in /var/www/ on the Debian machine.
I can push/pull the repo using git protocol:
Code:
git clone git://192.168.0.1/project.git
but when I try to do the same over HTTP it give me following error message:
Code:
git cloneurl
warning: remote HEAD refers to nonexistent ref, unable to checkout.
I am having problems printing from a terminal emulator from a windows workstation to a red hat printserver. I am using a program called Termlite to connect to the red hat server to access the application I am trying to run.
All other applications can print properly on red hat machine except this particular application that I am running from Termlite.
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies View Related