Slackware :: Does Mplayer Scale In Current With Radeon
Mar 7, 2010
I have noticed that recently, cannot tell after which update, my mplayer does not scale to full screen. It just shows the movie in the center of the screen with black frame around it.I do not know how tightly it may be related, but xine-check says my X server does not support YV12 overlays (twice, BTW, so there must be a bug in its message file) and has no XVideo support.Is it normal in current for now? The card is X1200 (R690)
View 4 Replies
ADVERTISEMENT
Jan 6, 2010
I recently setup my X to work well with the newer version of the ATI driver for my Radeon 3650, however no matter what I do, I can't get mplayer to scale to fullscreen. Something that xine has no trouble with. I have tried the x11, sdl, xover, gl, and gl2 outputs which all make no difference. Am I missing an output, or is something not working as it should? In particular, why is xine fine, while mplayer stumbles? As an unrelated question, it is possible to set mplayer to skip to a next file in a directory? From what I could tell, it does not seem to have this functionality built in.
View 14 Replies
View Related
Feb 10, 2010
I installed latest 64bit updates from current and it broke direct rendering for my radeon 9550 card using X11 drivers.Xorg.0.log:
Code:
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
[code]....
View 5 Replies
View Related
Apr 11, 2010
I am trying to install gnome mplayer and later mplayer codecs.script run
Code:
root@zorro:/home/siawacsh/Downloads/MPlayer/mplayer/slackbuild/gnome-mplayer# ./gnome-mplayer.SlackBuild
gnome-mplayer-0.9.8/
[code]....
View 16 Replies
View Related
May 14, 2010
Can anyone update me a little on the current styate of Radeon Drivers? I have a laptop with an RS690M video card on Slackware64 & Slamd64
There is
1. Kernel driver (drm/radeon.ko) but I am finding it difficult to find comments on it, except that it does some power management stuff
2. Proprietary fglrx had a recent significant update, and now talks to my card after a fashion (Experimental support)
3. OSS Radeonhd for X, which I gather is probably the worst atm but it's what I have in xorg.conf
4. OSS radeon driver, which is supposed to have more work done on it.
I don't need framebuffer stuff - the screen is hard enough for me to read as it is, but I do like to watch the occasional tv program or dvd and I'd like the video to be keeping up in full screen. ATM, Xvid, Opengl, and just about everything fails to, except sdl.
View 4 Replies
View Related
Feb 7, 2010
I am trying to use an ATI Radeon x300 graphics card with my current system setup with fedora 12 but i am having an openGL issue. I am trying to create a 3D model using comsol and i get an error like:
Failed to initialize 3D graphics. OpenGL not fully supported.
This is a hardware/software issue with the graphics card... not the program COMSOL. How could i enable openGL support to correct this issue?
View 2 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
Feb 5, 2011
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
View 9 Replies
View Related
Jan 22, 2010
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies
View Related
Feb 28, 2011
First time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
View 4 Replies
View Related
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
Feb 26, 2011
I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies
View Related
May 15, 2010
I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies
View Related
Feb 1, 2011
I use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
View 2 Replies
View Related
Mar 16, 2011
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies
View Related
Mar 22, 2011
This is not an earth-shattering issue, but, something I've recently noticed with the Chatzilla add-on for Seamonkey in Slackware-current. Maybe it is just my problem.If I add Chatzilla to FF 4.0 everything works as expected, that is, when I launch Chatzilla the default start-up window shows up with a list of IRC servers to click on (freenode being my favourite).
However,when I click on Chatzilla in Seamonkey I get a blank window that shows up, there is no server list. I noticed that the window in Chatzilla went blank for Seamonkey recently after a -current update (maybe a library issue?)
View 2 Replies
View Related
Jan 10, 2011
I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code:
neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro
Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
[Code]...
View 12 Replies
View Related
Mar 25, 2011
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies
View Related
Feb 21, 2011
i just updated my slackware to current, and every time i try to log in in my kde session my desktop is upside down.i mean literally everything is upside down, the only way i can have a usable desktop is with the "fail-safe session" of kde option on kdm which is what i'm using right now.does anybody know how can i solve this?i would post a snapshot of the upside down desktop but i can't do anything when i'm using it. fonts, windows, panels, icons everything is upside down..i solved this, just reinstalled the nvidia drivers and everything is goood again
View 1 Replies
View Related
Feb 25, 2011
I'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
View 13 Replies
View Related
Aug 7, 2010
Linux 2.6.21.5, GNU (Slackware 12.0)
MPlayer 1.0rc2-4.1.2
Although mplayer is not a part of the Slack distros, I think the issue is more in connection with the system setup and thefore I place this post in this forum. What is it with mplay- er? I've installed and reinstalled slackware 12.0 many times. And each time I have built mplayer from the sources and it has run fine. In the one before the last slack 12 installation, with subsequent building and installation of MPlayer, some- thing went wrong. And the same can be said of the present installation. Every source mplayer reproduces, it does it fine, with the exception of CD-ROM. No matter the CD-ROM I insert (I have them of the highest quality, bought out of the shelf) or the CD-ROM unit I use. The result is always the same: the sound is faulty, as if the machine had not enough speed. And I repeat. MPlayer played CD-ROMs fine in the past and under the same conditions. Or almost the same conditions, because something must obviously have changed.
Some additional data:
(a) Window$MediaPlayer plays them fine on the same machine.
(b) I invoke it from the physical console.
(c) KsCD under xfce plays them fine.
(d) I am able to load an o.s. from both CD-ROM units on the machine. All the more so, should audio be "correcty" read off the CD.
(e) Now I remember the last time I compiled mplayer with GUI support.
View 4 Replies
View Related
Feb 9, 2010
I have downloaded mplayer svn slackbuild script for slackware 12.2 and converted into tgz package and installed it on my slackware 12.2 system. I was using it with slackware 12.2 early and it worked fine. i formated my hard disk to give slackware 13 a try. and later when i installed slackware 12.2 and installed mplayer it is not opening i mean not initializing when i click mplayer icon from the multemedia menu or if i click a videofile and tell it to open with mplayer both ways its not working i tried reinstalling mplayer
but still not working.
View 3 Replies
View Related
Jun 11, 2011
First I've compiled and installed lame and xvid with --prefix=/usr.
Then I've compiled and install mplayer with --prefix=/usr.
Checking for libmp3lame ... yes (in FFmpeg: yes)
Checking for Xvid ... yes
mencoder -ovc help shows xvid (it works) but no mp3lame at all. And mplayer uses ffmpeg [ffmp3float], which extremely distors tracks. I'm sure it's not alsa, because music played online sounds normal.
View 6 Replies
View Related
Mar 28, 2011
Just read about this. [url] Don't know if there is any interest in this during rc cycle
View 14 Replies
View Related
Nov 1, 2010
i'm running a 32bit system installed slackware 13.1.
i'd like to watch a 720p movie but it doesn't run smoothly. so i tried to install the coreavc codecs.
Did all these instructions step by step:
1- http://code.google.com/p/coreavc-for...erInstallation
2- http://code.google.com/p/coreavc-for...wserverInstall
3- http://code.google.com/p/coreavc-for...ConfigureCodec
never got an error mesage. In my ~/.mplayer/config file I also added vc=coreserve,.
If I start the 720p movie, there aren't any changes. It is still jerking.
I'm not sure that MPlayer is really using the codecs, how can I look if it is using it or not?
View 10 Replies
View Related
Sep 25, 2010
I downloaded the codecs from slakbuilds and installed but mplayer still complains about missing codec for mwv format
View 10 Replies
View Related
Jul 12, 2010
I have installed slackware 13.1 on my friends laptop. Its an msi laptop . dual core 2ghz, 1gb ram nividia 9000 series.etc. everything is fine but after installing mplayer codecs from slackbuild and also xvidcore, i am not able to play avi files in mplayer. It is giving me a fatal error saying. error initializing -vo device. i tried to change the video driver. it was by default xv then i tried X11(xvid) then open gl and open gl with max textures . when i made it to open gl with max textures the video out came but it is lagging with the audio.
View 2 Replies
View Related
Apr 24, 2010
I'd like to know if there's a way to disable system suspension during mplayer playback, I'm using kde 4.4.2 by AlienBob on my slackware64-current, and powerdevil as the power manager. In powerdevil I've setup the performance profile to suspend the system after 30 minutes with no user interaction, and the presentation profile is setup not to use suspension at all, but I always forget to switch the profile before playing some long video on mplayer and the system goes down after 30 minutes of playback.
Does someone knows a way, a hidden mplayer setting (powerdevil setting would be ok too) that lets me disable suspension only when mplayer is working and nobody is using the system for more than 30 minutes??
View 2 Replies
View Related
Jan 23, 2011
I am having trouble getting sound to work through hdmi, I changed the device in the kde settings for multimedia and it now works in Amarok but Mplayer and VLC are refusing.
This is the error i am getting with mplayer:
I have disabled my sound card in the bios to save confusion (on my part) Upgraded my kernel to 2.6.37. My gfx card is a NV gt 430 xt
View 6 Replies
View Related
