Fedora :: 12 - Download Installation Dvd With Latest Updates?
Jan 30, 20101. Which XFCE on install. dvd Fedora 12? 4.4, 4.6?
2. Can I download installation dvd with latest updates?
3. Is it possible to see content of installation dvd Fedora 12?
ADVERTISEMENT
Ubuntu Installation :: 9.10 Hangs After Latest Updates / Resolve This?
Jan 29, 2010A first for me with Ubuntu. The system has hung. Well almost hung.
After installing the latest automatic updates - I'm sorry, I don't know how to identify which ones they were, but it was on 29 January 2010 - when selecting almost any application the system almost hangs. By almost hangs, I mean, the cursor will move very slightly once every 10 seconds or so, but even if it can be manipulated to a certain point, no action can be taken.
The only way out of this situation that I have been able to find is a hard reboot. (I was used to this type of thing with Windows XP, but had never seen it before with Ubuntu).
Reverting to Ubuntu Linux 2.6.31-17-genereic-PAE at the GRUB boot up option screen solves the problem.
Any suggestions on what might be happening, how to fix it, or if it is even worth bothering with? It is working just fine (so far) on the older generic-PAE.
Ubuntu Installation :: Latest Updates Break The Xserver?
Jun 13, 2010Ubuntu has been great and it is a great Linux distro. Unfortunately, the update of 9.10 desktop edition to release 10.4 failed on a couple of fronts.
1) Xserver is no longer working;
2) An upgrade of grub-pc causes an exception.
The system ran perfectly before the update was performed. The update resulted in Attempting to install GRUB to a partition instead of MBR. This is a BAD idea. usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and is use is discouraged.
Based on information found at [URL]... an attempt was made to execute the following command. sudo aptitude dist-upgrade But that resulted in E: dpkg was interrupted, you must manually run sudo dpkg configure ato correct the problem The later launches an upgrade of grub-pc. This routine requests the selection of which devices are to be used to store grub-install. When that was done ... GRUB failed to install to the followed devices: /dev/sdb1 /dev/sdc1 /dev/sdd4
Do you want to continue anyway? If you do, your computer may not start up properly. GRUB installation failed. Continue? Questions:
1) Can / should the upgrade of grub-pc be bypassed in order to get the system running?
2) If not, what values should be selected when selecting the devices to store grub-install?
3)Because the computer is a RAID configuration, would someone advise are there special considerations which should be considered?
4) Once grub-pc is resolved or bypassed, should the commands found in the aforementioned article be used to repair xserver.
5) Are there additional measures which will be needed to in order to complete the update to release 10.4?
Here are some helpful details on the system configuration
The computer has four disk drives using RAID 1 and RAID 5.In the following configuration RAID5 Device #0 750.2 GB Sotfware RAID device
#1 750.2 GB ext4
SCSI1 (0,0,0) (sda) 320.1 GB ATA WDC WD3200AAKS-2
#4 primary 250.1 GB K raid
#3 primary 16.0 GB F swap
[Code]...
Ubuntu Installation :: Need Karmic Server Install CD With Latest Updates
Feb 21, 2010On my iSCSI booted server, the standard Karmic Server install CD installs a system that won't boot.This is caused by a bug in the initscripts. This bug is solved in an update of this package. How do I get the updated version of the initscripts package on my install CD?
View 1 Replies View RelatedUbuntu Installation :: Exporting LATEST Updates (deltas) To File?
Sep 20, 2010I have Alienvault (which is debian based) running on an offline network. I need to have a repo server on that network in order to provide updates/other installation sources. Currently I have configured Ubuntu Server 10.04 as an apt-mirror on an internet-connected network.
What I need to do is find a way to automatically take the newest updates, and export them to disk. I need to mirror the internet-connected-repo server on the offline-network side. But I don't want to burn all 40 gigs or so every time new updates come out. Basically, I'd like to perform incremental backups of the mirror after the first full backup. Is it possible to automate this daily?
[Code]...
Ubuntu Installation :: Create USB Install Drive With Latest Updates?
Mar 17, 2011I'm going to be doing some field testing of Ubuntu for compatibility on various laptops. I'd like to have a USB stick containing the latest kernel, drivers, packages, etc. I already have one prepared with the 10.10 release, but there have been many updates since then and no 10.10.1 release thus far.
Is it possible to update my existing flash drive to the latest and greatest...using the software update tool while booted using the drive? ...from within an existing Ubuntu 10.10 installation? .manually?
Ubuntu Installation :: 11.04 After Latest Updates Unable To Login To The System
Jul 15, 2011I have installed Ubuntu 11.04 32-bit on my new desktop. After installation all gone well.
The initial upgrades after fresh installation also ran well and I was able to reboot and use the system successfully.This was before three-days.Yesterday night I ran again the Update Manager and installed the available (4-5) updates and then I installed Sun-Java-JDK using Synaptic Package Manager using the packages from the canonical partners.
After installation was done I shut down the system and in the morning when
I restarted the system the login screen is coming up but on entering the login credentials a black screen with some text(unable to see the text) flashes and returns me back to login screen.I tried logging in with both normal and admin type users.But admin type user too encounters the same problem.
I have partitioned my 500GB into 5 partitions and there is sufficient data on each partition.
I assume fresh installation would fix it and the data on logical partitions would be intact but doing this re-installation would require me to install the updates again and do all the settings I did till now again.
Fedora Hardware :: 14 Not Booting After Installing Latest Updates
Nov 27, 2010So, it's 2010 and I already though I got rid of coding my own drivers & compiling my own kernel in normal use... After installing latest Fedora 14 updates, my system won't boot anymore into fedora. Just continuous loop no matter if I select previous kernel system won't boot.
Anyone any ideas? I think it might be ATI driver but not 100% sure since I didn't see any D/A related or Kernel updates wasn't upcoming...
Anyways I will figure out this sooner or later but this kind of updates sucks a bit that your system goes suddenly totally unuseable or system won't reboot, sooo , time to move on with an another distro or is Fedora just RedHat's playaground?
General :: Does The Latest Ubuntu Download (.iso File) Contain Latest Fixes
Aug 5, 2011If I go to the website and download the ISO file is it the exact same one that was released in April or will it contain the latest patches (e.g. security fixes, etc) that have been release since then? If it doesn't I suppose I'll have to download the entire ISO file, install the OS, and then have another couple hundred MB to download which is not what I'd prefer.
View 2 Replies View RelatedUbuntu Installation :: 10.04 Wont Boot After Latest Install Of Kernel Updates
Jun 7, 2010I have installed ubuntu 10.04 64 bit in April and it has worked flawlessly. However, today I ws prompted to install Kernel updates. Now when I try to boot it continually cycles between a black screen and the NVIDIA logo.
Yes I have been using the nvidia drivers previously but without incident till now.
I have tried crtl-alt-f1 but this does not stop the cycling.
Fedora :: Blank Screen After Latest Updates - Nvidia Card
Mar 15, 2010I ran the latest updates this week (including the new kernel and the new kmod-nvidia update) and I got a blank screen when I rebooted. (I get the Fedora bar across the bottom of the screen, then after that the screen goes blank) I assume this is when the xorg server is trying to start..
I went into single user mode , backed up and then removed the xorg.conf file but still got a blank screen upon reboot.
I rebooted into single user mode, copied the /var/log/Xorg.0.log file to a safe location, and then restored the system back to its original state.
I've since rsync'd my system back to where it was before the update.
Here's my Xorg.0.log file:
Fedora :: Boots To Blank Screen After Latest Updates (nvidia)
Aug 25, 2011I've posted this to the fedora mailing list with no response, my apologies if it's been addressed here...
I have an IBM Thinkpad with an Nvidia card ( nVidia Corporation GT218 [NVS 3100M] (rev a2) )
I currently have the nouveau driver black listed in my grub.conf setup: rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
I did the update which installed/updated the following:
---> Package kernel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-devel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-headers.i686 0:2.6.35.14-95.fc14 set to be updated
---> Package kmod-nvidia.i686 1:280.13-2.fc14 set to be updated
However when I reboot the system boots to a blank screen, and even the previous kernel boots to a blank screen. I tried installing akmod-nvidia but get the same results
I've restored the system back to before the update for now..
Ubuntu Installation :: Restricted Modules Not Updating With Latest Kernel Updates Lucid 10.04
May 8, 2010I have noticed in the recent updates there is a Kernel update 2.6.32-22 but there is no restricted modules included. On my Desktop I have a Nvidia card which I installed the driver using the Hardware Drivers Application. As far as I know these Drivers are ether reinstalled or updated whenever there is a kernel update.
I also have a Laptop with a ATI Radeon card which I did run the updates and ended up (after the reboot) in low graphics mode, after a bit of work I was able to reinstall the drivers and get my desktop back so that's ok now.
I had this problem a few years ago with an old version of Ubuntu, kernel updates but no restricted drivers. The drivers turned up the next day and all was fine. I was just wandering if this is a known issue with Lucid or if anyone else has had this problem, It's been a couple of days since I noticed the Kernel update but still Restricted Modules. Oh I'm using Ubuntu Lucid 10.04
Ubuntu Installation :: Where To Download Debian Version Of Latest Of Firefox?
Oct 30, 2010Where can I download the debian version of the latest version of Firefox?
View 1 Replies View RelatedUbuntu Installation :: How To Download All Updates For Distro
Mar 22, 2010I have a laptop running 8.04LTS very well and have been keeping it up to date. I'd like to have the ability to re-install 8.04 at a later time if I had to reformat the laptop. I have the latest 8.04 CD image (8.04.2 I think) but of course there have been many updates since then. Is there a way for me to capture all these updates so that I can reapply them at a later time after a fresh install of 8.04?
View 1 Replies View RelatedUbuntu Installation :: Can Not Download Updates / Sort It?
Mar 27, 2010Update Manager comes up with 247 downloads, but when I hit Install Update I get a white screen and nothing happens. I have just installed 9.10.
View 5 Replies View RelatedUbuntu Installation :: Download 10.04 With Latests Updates?
Aug 18, 2010Is there some way to download Ubuntu 10.04 with the latests updates (up to today) included?
View 6 Replies View RelatedUbuntu Installation :: Download All Of The Packages For The Normal Installation And Updates?
Feb 9, 2010I have an installation of Ubuntu 9.04 on a standalone workstation. I need to download all of the packages for the normal installation and updates.Does anyone know where I can pull the complete package sets rather than individual packages rather than one at a time?
View 1 Replies View RelatedFedora :: Download Updates While Offline?
Apr 18, 2011I am about to loose my internet soon, I am not sure for how long, but I am curious, Can I go to another computer that has internet and download updates for my computer, take them back to my computer and install the updates so I can stay up to date?
View 4 Replies View RelatedUbuntu Installation :: Can't Download Any Updates And Can't Use Package Managers
Jan 19, 2010I don't know whats happening. the second i open either the update manager, add or remove programs, or the package manager tehy close instantaneously and when i click the button for updates on the top bar of my computer it shows a picture of a minus sign in a red circle. hwo can i fix this. i have ubuntu 9.04 and im trying to upgrade it and get new programs but it wont let me. ive tried the sudo get updates etc etc
View 1 Replies View RelatedFedora :: Unable To Download And Install Updates
Jan 24, 2010I'm having a problem downloading and installing any updates. It compiles a list of updates, then tells me I need to install further updates and generates a list of those. Then it provides me with an error message. Info on which is in the code quote below. I'm very new to Linux, so I can't say I know how to go about sorting this issue. It's a PC with the following processor
Intel Pentium (R) Dual CPU E2180 @ 2.00Ghz
Code:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main() .....
Ubuntu :: Download Updates Not With Updates Manager?
Feb 9, 2010updates manager constantly crash i tried gnome in safe mode and it doesn't work so i need some way to update the os untill hopefully one update would fix the update.
View 5 Replies View RelatedUbuntu :: Repeating GUI Login After Latest 10.04 Updates?
Aug 24, 2010I have an MSI U100 Winbook with Ubuntu Workstation 10.04 LTS newly installed (about 4 days ago).
The update manager displayed about 15 or so updates for my 10.04 installation which I installed. Upon reboot, I can not successfully login to the desktop. It will take my username/password, the screen will go black for a couple of seconds, then the error sound, and back to the login dialogue.
A tail on /var/log/messages displays:
atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0)
atkbd.c: Use 'setkeycodes e077 <keycode>; to make it known.
composit sync not supported
These messages keep repeating. I am able to login at the console just fine. I have enabled root login but get the same issues logging in as root. I have googled and found several articles and postings involving these messages but they are all in reference to upgrading from 9.x to 10.04. I did not upgrade and did not experience the freezing of applications as noted in those posts.
Debian :: Can't Fetch Latest Updates / What Is Going Wrong?
Sep 9, 2010I've got a problem when i try apt-get update I get the following in the report:
Failed to fetch http://ftp.uk.debian.org/debian/dist...86/Packages.gz 404 Not Found
Failed to fetch http://ftp.uk.debian.org/debian/dist...rce/Sources.gz 404 Not Found
R
Network is OK, what is going wrong?
General :: Determine Which Disk Contains Latest Updates?
Dec 13, 2010Consider the following scenario: you have two disks that are kept synchronized by some method. Could be RAID, could be LVM snapshots, could be a script. However, something has gone wrong. The disks are out-of-sync and you don't know which disk received which updates. You want to manually re-sync the disks but how do you figure-out which file to copy where?
I'm thinking of saving recursive directory-listings of the entire disks to text-files. Sorting them on last-update and removing all identical entries from the files.
I have a feeling that this is something that can be done with just a few command's but I need some help to get me started.
Slackware :: Latest Updates To -current Broke Alt-tab In Kde
Feb 2, 2011After applying the 31st Jan and 1st Feb updates to -current (32 bit), alt-tab to switch between windows is no longer working in kde. It seems to lock the desktop and then after a few seconds kde goes back to the login screen. If I disable all desktop effects then alt-tab works again.
View 10 Replies View RelatedOpenSUSE :: Chromium Web Browser Does Not Start After Latest Updates
Aug 14, 2011openSuse 11.4 + Gnome 3 (upgraded from oneclick install). A couple of ago I ran zypper update and there were some updates available for chromium (and a few other things). I installed them, did some work in libreoffice (dint use chromium then) and turned the computer off. Today I needed to do some web surfing, so boot up my computer, launch chromium and get the following message (I translated it from spanish as I use the spanish version of opensuse)...
Failed to launch <<Chromium web browser>>
Failure executing child process <<chromium>> (The specified file or folder doesn't exists)
Before the "update" chromium worked perfectly. Now it doesn't even start.
OpenSUSE :: Chromium Doesn't Start After Latest Updates(15.0.854.0-2.1)?
Aug 17, 2011Chromium doesn't start after latest updates(15.0.854.0-2.1)
Distro: openSUSE 11.4 x86_64
chromium, chromium-desktop-kde
Version: 15.0.854.0-2.1
Repo: obs://build.opensuse.org/openSUSE:11.4:Contrib
libv8-3
Version: 3.5.5.0-2.1
[Code]...
OpenSUSE Multimedia :: Sound Not Working After The Latest Updates
Sep 16, 2010opensuse v11.3
linux 2.6.34.4-0.1-desktop x86_64
After the latest round of updates approx Sep 10, sound has stopped working. (I rarely need sound for anything so it took a while to notice.) In Yast :: Hardware :: Sound it lists all of the devices that were previously defined.
- 0: SBx00 Azalia (Intel HDA)
- 1: RS780 Azalia controller
- 2: Logitech USB headset
- 3: USB Audio
Yet when I go to Gnome :: Control Center :: Hardware :: Sound and select the tab Hardware, nothing is listed. I suspect this is why there is no sound. How do I go about reloading the hardware into the hardware listing?
Ubuntu :: Thinkpad T41 Laptop Sound After One Of The Latest Updates
Sep 14, 2010I had sound before but after one of the latest updates the sound quit working. I read other threads and they suggested to type. Code: alsamixer on terminal. I did that and unmute everything and pumped each setting to the highest possible. When I boot the laptop again everything is muted, How can I save settings or what other solutions are there for this problem.
View 1 Replies View Related