Debian :: Can't Fetch Latest Updates / What Is Going Wrong?

Sep 9, 2010

I've got a problem when i try apt-get update I get the following in the report:
Failed to fetch http://ftp.uk.debian.org/debian/dist...86/Packages.gz 404 Not Found
Failed to fetch http://ftp.uk.debian.org/debian/dist...rce/Sources.gz 404 Not Found
R

Network is OK, what is going wrong?

View 13 Replies


ADVERTISEMENT

Software :: Freshclam Will Not Fetch Updates - Uses Wrong DNS

May 16, 2011

On a new machine (Ubuntu 10.04.2), the freshclam program (in the package clamav-freshclam version 0.96.5+dfsg-1ubuntu1.10.04.2) won't do updates. It fails on DNS queries. DNS is working for other programs OK. Diagnosis with tcpdump shows that it is sending the queries to 127.0.0.1 instead of the actual DNS servers designated in the /etc/resolv.conf file. Of course it won't get an answer because it is querying the wrong IP address. There is a --no-dns option which I tried, but that doesn't help. Any idea if freshclam or clamav needs its own config of DNS servers?

View 6 Replies View Related

Ubuntu Servers :: Freshclam Won't Fetch Updates - Uses Wrong DNS

May 16, 2011

On a new machine running Ubuntu 10.04.2, the freshclam program (in clamav-freshclam version 0.96.5+dfsg-1ubuntu1.10.04.2) won't do updates to the database. It fails on DNS queries. DNS works OK for other programs. The tcpdump command shows that it sends the queries to 127.0.0.1 instead of the correct DNS servers specified by /etc/resolv.conf. Of course it doesn't get an answer because it is asking the wrong IP address.

There is also a --no-dns option, but that didn't help/

Do I need to tell ot what the DNS servers are, somewhere?

Why would it query only 127.0.0.1 for DNS?

View 1 Replies View Related

Ubuntu :: Updates Failed To Fetch 404 Not Found / Sort It?

Oct 24, 2010

I have been having trouble with my updates, specifically these code...

When I try to install these updates I get the following error message code...

View 6 Replies View Related

Ubuntu Installation :: Cannot Install Updates - Failed To Fetch

Jun 1, 2011

I'm unable to install updates and new packages. I receive messages such as the following:

W: Failed to fetch [URL] 404 Not Found [IP: 91.189.92.161 80]
W: Failed to fetch [URL] 404 Not Found [IP: 91.189.92.161 80]
W: Failed to fetch [URL] 404 Not Found [IP: 91.189.92.161 80]

I recently had windows vista taken off my hard drive and my partitions realigned to create more storage space on my hard drive. I don't now if this is related. I was able to install upgrades previously.

View 4 Replies View Related

Ubuntu :: Update Manager Failed To Fetch Updates

Mar 14, 2010

when I open the update manager, he lists 14 items as recomended updates and when I click on install updates appears a box with this mesage "An error occurred" and makes the following list: Code: W: Failed to fetch [URL] Size mismatch

[Code].....

View 10 Replies View Related

Debian :: Error - Fetch Failed: W:Failed To Fetch Bzip2:/var/lib/apt/lists/partial

Feb 13, 2011

Lately when I've tried to update my packages many of them don't update. I get nothing out of the ordinary when using the terminal but when I try to update via the Update manger I get this error message:

Code:
Error message:
Fetch failed: W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_source_Sources Hash Sum mismatch
W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_binary-amd64_Packages Hash Sum mismatch, W:Failed to fetch http://mirror.steadfast.net/debian/dists/testing/updates/main/source/Sources 404 Not Found [IP: 208.100.4.53 80]

[Code]...

I've tried several different mirrors but get the same error with every one. Same result with ftp as well. Yesterday I upgraded to Wheezy and every package successfully upgraded, but today the problem started again.

View 10 Replies View Related

Debian Configuration :: Latest Updates To "Grub Pc" Crashed System?

Dec 19, 2010

Debian squeeze (weekly build) with latest kernel "2.6.32-5-686"

installed the latest updates, but latest updates to "Grub pc" crashed my system... it stops before login-screen. Unfortunately i can see any error messages, the screen stays black...

i have to re-install i guess...

View 2 Replies View Related

Debian Multimedia :: Squeeze Mythtv-database Sql Errors "Failed To Execute SQL" With Latest Updates

May 27, 2011

Setting up mythtv-database (0.24.1-0.0squeeze1) ... Failed to execute SQL: GRANT ALL PRIVILEGES ON mythconverg.* TO mythtv@localhost IDENTIFIED BY 'mythtv' Access denied for user 'root'@'%' to database 'mythconverg' at -e line 8, <> line 1. dpkg: error processing mythtv-database (--configure): subprocess installed post-installation script returned error exit status 255 configured to not write apport reports Errors were encountered while processing: mythtv-database

View 2 Replies View Related

Ubuntu Installation :: Can't Get Updates - Failed To Fetch - "404 Not Found"

May 19, 2011

I just can't get any updates from: [URL] AND [URL] In both cases it says "404 not found" Here's the code out of the terminal after typing "sudo apt-get update"

W: Failed to fetch [URL] 404 Not Found
W: Failed to fetch [URL] 404 Not Found
E: Some index files failed to download. They have been ignored, or old ones used instead.

View 9 Replies View Related

Debian Configuration :: Latest Wine Repo - Where To Get The Latest Unstable Automatically

Nov 29, 2010

The latest in experimental is 1.1... the stable by upstream is 1.2 and the latest unstable is 1.3. So is there a repository where I can get the latest unstable automatically?

View 7 Replies View Related

Ubuntu :: Repeating GUI Login After Latest 10.04 Updates?

Aug 24, 2010

I have an MSI U100 Winbook with Ubuntu Workstation 10.04 LTS newly installed (about 4 days ago).

The update manager displayed about 15 or so updates for my 10.04 installation which I installed. Upon reboot, I can not successfully login to the desktop. It will take my username/password, the screen will go black for a couple of seconds, then the error sound, and back to the login dialogue.

A tail on /var/log/messages displays:

atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0)
atkbd.c: Use 'setkeycodes e077 <keycode>; to make it known.
composit sync not supported

These messages keep repeating. I am able to login at the console just fine. I have enabled root login but get the same issues logging in as root. I have googled and found several articles and postings involving these messages but they are all in reference to upgrading from 9.x to 10.04. I did not upgrade and did not experience the freezing of applications as noted in those posts.

View 1 Replies View Related

Fedora :: 12 - Download Installation Dvd With Latest Updates?

Jan 30, 2010

1. Which XFCE on install. dvd Fedora 12? 4.4, 4.6?
2. Can I download installation dvd with latest updates?
3. Is it possible to see content of installation dvd Fedora 12?

View 4 Replies View Related

General :: Determine Which Disk Contains Latest Updates?

Dec 13, 2010

Consider the following scenario: you have two disks that are kept synchronized by some method. Could be RAID, could be LVM snapshots, could be a script. However, something has gone wrong. The disks are out-of-sync and you don't know which disk received which updates. You want to manually re-sync the disks but how do you figure-out which file to copy where?

I'm thinking of saving recursive directory-listings of the entire disks to text-files. Sorting them on last-update and removing all identical entries from the files.

I have a feeling that this is something that can be done with just a few command's but I need some help to get me started.

View 6 Replies View Related

Slackware :: Latest Updates To -current Broke Alt-tab In Kde

Feb 2, 2011

After applying the 31st Jan and 1st Feb updates to -current (32 bit), alt-tab to switch between windows is no longer working in kde. It seems to lock the desktop and then after a few seconds kde goes back to the login screen. If I disable all desktop effects then alt-tab works again.

View 10 Replies View Related

Fedora Hardware :: 14 Not Booting After Installing Latest Updates

Nov 27, 2010

So, it's 2010 and I already though I got rid of coding my own drivers & compiling my own kernel in normal use... After installing latest Fedora 14 updates, my system won't boot anymore into fedora. Just continuous loop no matter if I select previous kernel system won't boot.

Anyone any ideas? I think it might be ATI driver but not 100% sure since I didn't see any D/A related or Kernel updates wasn't upcoming...

Anyways I will figure out this sooner or later but this kind of updates sucks a bit that your system goes suddenly totally unuseable or system won't reboot, sooo , time to move on with an another distro or is Fedora just RedHat's playaground?

View 1 Replies View Related

OpenSUSE :: Chromium Web Browser Does Not Start After Latest Updates

Aug 14, 2011

openSuse 11.4 + Gnome 3 (upgraded from oneclick install). A couple of ago I ran zypper update and there were some updates available for chromium (and a few other things). I installed them, did some work in libreoffice (dint use chromium then) and turned the computer off. Today I needed to do some web surfing, so boot up my computer, launch chromium and get the following message (I translated it from spanish as I use the spanish version of opensuse)...

Failed to launch <<Chromium web browser>>
Failure executing child process <<chromium>> (The specified file or folder doesn't exists)
Before the "update" chromium worked perfectly. Now it doesn't even start.

View 4 Replies View Related

OpenSUSE :: Chromium Doesn't Start After Latest Updates(15.0.854.0-2.1)?

Aug 17, 2011

Chromium doesn't start after latest updates(15.0.854.0-2.1)

Distro: openSUSE 11.4 x86_64
chromium, chromium-desktop-kde
Version: 15.0.854.0-2.1
Repo: obs://build.opensuse.org/openSUSE:11.4:Contrib
libv8-3
Version: 3.5.5.0-2.1

[Code]...

View 9 Replies View Related

OpenSUSE Multimedia :: Sound Not Working After The Latest Updates

Sep 16, 2010

opensuse v11.3
linux 2.6.34.4-0.1-desktop x86_64

After the latest round of updates approx Sep 10, sound has stopped working. (I rarely need sound for anything so it took a while to notice.) In Yast :: Hardware :: Sound it lists all of the devices that were previously defined.

- 0: SBx00 Azalia (Intel HDA)
- 1: RS780 Azalia controller
- 2: Logitech USB headset
- 3: USB Audio

Yet when I go to Gnome :: Control Center :: Hardware :: Sound and select the tab Hardware, nothing is listed. I suspect this is why there is no sound. How do I go about reloading the hardware into the hardware listing?

View 2 Replies View Related

Ubuntu Installation :: 9.10 Hangs After Latest Updates / Resolve This?

Jan 29, 2010

A first for me with Ubuntu. The system has hung. Well almost hung.

After installing the latest automatic updates - I'm sorry, I don't know how to identify which ones they were, but it was on 29 January 2010 - when selecting almost any application the system almost hangs. By almost hangs, I mean, the cursor will move very slightly once every 10 seconds or so, but even if it can be manipulated to a certain point, no action can be taken.

The only way out of this situation that I have been able to find is a hard reboot. (I was used to this type of thing with Windows XP, but had never seen it before with Ubuntu).

Reverting to Ubuntu Linux 2.6.31-17-genereic-PAE at the GRUB boot up option screen solves the problem.

Any suggestions on what might be happening, how to fix it, or if it is even worth bothering with? It is working just fine (so far) on the older generic-PAE.

View 4 Replies View Related

Ubuntu Installation :: Latest Updates Break The Xserver?

Jun 13, 2010

Ubuntu has been great and it is a great Linux distro. Unfortunately, the update of 9.10 desktop edition to release 10.4 failed on a couple of fronts.

1) Xserver is no longer working;
2) An upgrade of grub-pc causes an exception.

The system ran perfectly before the update was performed. The update resulted in Attempting to install GRUB to a partition instead of MBR. This is a BAD idea. usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and is use is discouraged.

Based on information found at [URL]... an attempt was made to execute the following command. sudo aptitude dist-upgrade But that resulted in E: dpkg was interrupted, you must manually run sudo dpkg configure ato correct the problem The later launches an upgrade of grub-pc. This routine requests the selection of which devices are to be used to store grub-install. When that was done ... GRUB failed to install to the followed devices: /dev/sdb1 /dev/sdc1 /dev/sdd4

Do you want to continue anyway? If you do, your computer may not start up properly. GRUB installation failed. Continue? Questions:
1) Can / should the upgrade of grub-pc be bypassed in order to get the system running?
2) If not, what values should be selected when selecting the devices to store grub-install?
3)Because the computer is a RAID configuration, would someone advise are there special considerations which should be considered?
4) Once grub-pc is resolved or bypassed, should the commands found in the aforementioned article be used to repair xserver.
5) Are there additional measures which will be needed to in order to complete the update to release 10.4?

Here are some helpful details on the system configuration

The computer has four disk drives using RAID 1 and RAID 5.In the following configuration RAID5 Device #0 750.2 GB Sotfware RAID device
#1 750.2 GB ext4
SCSI1 (0,0,0) (sda) 320.1 GB ATA WDC WD3200AAKS-2
#4 primary 250.1 GB K raid
#3 primary 16.0 GB F swap

[Code]...

View 1 Replies View Related

Ubuntu :: Thinkpad T41 Laptop Sound After One Of The Latest Updates

Sep 14, 2010

I had sound before but after one of the latest updates the sound quit working. I read other threads and they suggested to type. Code: alsamixer on terminal. I did that and unmute everything and pumped each setting to the highest possible. When I boot the laptop again everything is muted, How can I save settings or what other solutions are there for this problem.

View 1 Replies View Related

CentOS 5 :: Sendmail Stopped Working After Latest Updates

May 31, 2010

We are running CentOS 5.4 x86 on ESX 4 Server. We have a busy Help Desk, a Forum and several name-based websites running. Weve been using CentOS for this 'purpose for several years (different versions) and so far we have never had a problem. On Saturday, I applied all the latest updates including the Kernel updates. I rebooted the server and all seemed well until Sunday morning when I didn't get my Logwatch in the mail. Then I got a telephone call from a customer asking me why I hadn't responded to a Trouble Ticket he had created on Saturday afternoon (creating a TT sends an email via sendmail to all the support staff). I did a few tests and sendmail has just stopped working. The Logwatch had been created and had been sent to root, but all mail for root is redirected to my Mail Server on e different box (GroupWise). There was nothing wrong with the mail server, but sendmail has just stopped.

Fortunately I had created a snapshot before I applied the updates, so I reverted back to the snapshot and mail started working again, but I lost 2 days info because I had run the backup before I applied the patches. Now I see there are 132 Updates available, but there is obviously a problem somewhere in there!

View 2 Replies View Related

Fedora :: Blank Screen After Latest Updates - Nvidia Card

Mar 15, 2010

I ran the latest updates this week (including the new kernel and the new kmod-nvidia update) and I got a blank screen when I rebooted. (I get the Fedora bar across the bottom of the screen, then after that the screen goes blank) I assume this is when the xorg server is trying to start..

I went into single user mode , backed up and then removed the xorg.conf file but still got a blank screen upon reboot.

I rebooted into single user mode, copied the /var/log/Xorg.0.log file to a safe location, and then restored the system back to its original state.

I've since rsync'd my system back to where it was before the update.

Here's my Xorg.0.log file:

View 3 Replies View Related

Fedora :: Boots To Blank Screen After Latest Updates (nvidia)

Aug 25, 2011

I've posted this to the fedora mailing list with no response, my apologies if it's been addressed here...

I have an IBM Thinkpad with an Nvidia card ( nVidia Corporation GT218 [NVS 3100M] (rev a2) )

I currently have the nouveau driver black listed in my grub.conf setup: rhgb quiet nouveau.modeset=0 rdblacklist=nouveau

I did the update which installed/updated the following:

---> Package kernel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-devel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-headers.i686 0:2.6.35.14-95.fc14 set to be updated
---> Package kmod-nvidia.i686 1:280.13-2.fc14 set to be updated

However when I reboot the system boots to a blank screen, and even the previous kernel boots to a blank screen. I tried installing akmod-nvidia but get the same results

I've restored the system back to before the update for now..

View 1 Replies View Related

Ubuntu Installation :: Need Karmic Server Install CD With Latest Updates

Feb 21, 2010

On my iSCSI booted server, the standard Karmic Server install CD installs a system that won't boot.This is caused by a bug in the initscripts. This bug is solved in an update of this package. How do I get the updated version of the initscripts package on my install CD?

View 1 Replies View Related

Ubuntu Installation :: Exporting LATEST Updates (deltas) To File?

Sep 20, 2010

I have Alienvault (which is debian based) running on an offline network. I need to have a repo server on that network in order to provide updates/other installation sources. Currently I have configured Ubuntu Server 10.04 as an apt-mirror on an internet-connected network.

What I need to do is find a way to automatically take the newest updates, and export them to disk. I need to mirror the internet-connected-repo server on the offline-network side. But I don't want to burn all 40 gigs or so every time new updates come out. Basically, I'd like to perform incremental backups of the mirror after the first full backup. Is it possible to automate this daily?

[Code]...

View 8 Replies View Related

Ubuntu Multimedia :: Pulseaudio Not Working After Latest Updates On Maverick?

Dec 10, 2010

I've been running Maverick 64bit fine on my Dell M1330 laptop until a couple of days ago. After the latest updates (I guess to kernel 2.6.35-24-generic), sound stopped working properly. The sound indicator applet tells me that the sound system is not responding. The login sound doesn't play anymore.

On the other hand Rhythmbox plays and I can hear the music. I can adjust Rhythmbox volume but not the global volume (as neither the sound indicator applet nor the multimedia volume keys on my laptop work).

Code:
$alsamixer
it works flawless. Here is what I get if I try to run pulseaudio from the terminal

Code:
$ pulseaudio
E: module-ladspa-sink.c: Master sink not found
E: module.c: Failed to load module "module-ladspa-sink" (argument: "sink_name=ladspa_output.mbeq_1197.mbeq

[Code]...

View 1 Replies View Related

Ubuntu Installation :: Create USB Install Drive With Latest Updates?

Mar 17, 2011

I'm going to be doing some field testing of Ubuntu for compatibility on various laptops. I'd like to have a USB stick containing the latest kernel, drivers, packages, etc. I already have one prepared with the 10.10 release, but there have been many updates since then and no 10.10.1 release thus far.

Is it possible to update my existing flash drive to the latest and greatest...using the software update tool while booted using the drive? ...from within an existing Ubuntu 10.10 installation? .manually?

View 7 Replies View Related

Ubuntu Installation :: 11.04 After Latest Updates Unable To Login To The System

Jul 15, 2011

I have installed Ubuntu 11.04 32-bit on my new desktop. After installation all gone well.

The initial upgrades after fresh installation also ran well and I was able to reboot and use the system successfully.This was before three-days.Yesterday night I ran again the Update Manager and installed the available (4-5) updates and then I installed Sun-Java-JDK using Synaptic Package Manager using the packages from the canonical partners.

After installation was done I shut down the system and in the morning when
I restarted the system the login screen is coming up but on entering the login credentials a black screen with some text(unable to see the text) flashes and returns me back to login screen.I tried logging in with both normal and admin type users.But admin type user too encounters the same problem.

I have partitioned my 500GB into 5 partitions and there is sufficient data on each partition.

I assume fresh installation would fix it and the data on logical partitions would be intact but doing this re-installation would require me to install the updates again and do all the settings I did till now again.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved