Ubuntu Multimedia :: Maverick 10.10 Gnome - Compiz - Screen Dims If Bad Keyboard Input - Ex - Del Key

Dec 14, 2010

Running 10.10 with compiz and gnome

The whole screen goes dim for any of the below examples. running "compiz --replace" fixes it until any of the below happens again. When the screen is dim, a new window opened (ex: firefox new window or a new gnome terminal) is full brightness while the rest of the screen stays dim.

Following causes the screen to go dim: In the screen saver - hit the delete key to backspace when the password field is empty. in firefox - ^f to find on a page - start typing and as soon as the find field has text that does not exist anywhere on the page "Phrase not found" the screen dims. in gnome terminal - the profile has the terminal bell checkbox ON - hit backspace on a bash input line with no text on it.

View 2 Replies


ADVERTISEMENT

Ubuntu :: Screen Dims Using Compiz Cub?

Jul 30, 2010

I have enabled compiz on my mum's 64 bit Ubuntu desktop. It works well, but the screen dims significantly once I click the mouse button to rotate the cube. Releasing the mouse button brings the screen brightness back to normal. Is there a setting that controls the screen brightness whilst rotating the cube?

View 2 Replies View Related

Fedora :: Gnome: Screen Dims And Locks Up Processes?

Jun 8, 2010

This is a bit complicated to discribe because I don't know the cause, but this problem has been happening for some time (over a few years and generations of kernals), with different Gnome distributions, including Ubuntu (and family) and Fedora. When using Gnome (and only Gnome), I frequently see the screen dim. At the same time, all processes will be locked up. This may happen for a second or two, or it make require a reboot. The mouse can usually move and the underlying program GUIs are still visible, it's just that one or more of the GUIs will be dimmed. This is usually most noticeable with a browser, but that may just be a coincidence.

View 11 Replies View Related

Debian Multimedia :: NVidia+Compiz+crtl+alt+F7=blank Screen [Gnome]?

May 27, 2011

I got the nVidia driver and Compiz installed. Everything's running fine . But then I tried crtl+alt+F1 - which worked though the font was way too big - and then crtl+alt+F7 to get back to the Desktop but it went to a black screen and blinking cursor instead. I searched a bit and it seems this was a problem a few years back but nothing recent. FWIW, I don't have this problem with Hardy/nVidia/Compiz on another drive in this same machine. Is there a way to fix this?

View 3 Replies View Related

Ubuntu / Apple :: Disrupted Keyboard Input In Gnome?

Nov 7, 2010

I'm running a 13" white Macbook. The keyboard worked fine, until today. I logged in and half the keys didn't work, the other half were numbers not the letters they were supposed to be. This started after log in, meaning I was able to enter my password properly: The problem starts when gnome boots up.

By copy and pasting, I installed Kubuntu, where the keyboard also works properly, so this is clearly a gnome problem. I haven't ruled out malicious software, which seems like the next step: How do I verify and replace all the software (gnome) that might be corrupted?

View 2 Replies View Related

Ubuntu Multimedia :: Maverick Compiz Choppy/high Cpu Utilization?

Jul 7, 2011

Been using Maverick on my Dell Studio XPS for many months without issue. About a week or two ago, compiz has been acting funny and using a lot of cpu time, making everything "choppy," especially after resuming from suspend. I've googled and searched the forum, but all the related posts seem to be several years old.I tried selecting the previous kernel but it didn't help. Was there a bad update to compiz or ati graphics?

My info:

Code:
> lspci | grep VGA
21:02:00.0 VGA compatible controller: ATI Technologies Inc Madison [Mobility Radeon HD 5000 Series]
> grep -i driver /etc/X11/xorg.conf | uniq
Option "VendorName" "ATI Proprietary Driver"
Driver "fglrx"

[Code]...

View 3 Replies View Related

Ubuntu :: No Keyboard Or On Screen Input - Any Workaround?

Aug 8, 2011

Running natty. Main user account. In Ubuntu & Ubuntu Classic, both gnome, no keyboard or on-screen keyboard input. Compiz & metacity both bad. Mouse okay. Other user accounts okay. KDE okay.

Tracked problem to /home/{user}/.gconf/desktop/gnome/session/required_components/%gconf.xml. Removed file, problem goes away.

File contents:
<?xml version="1.0"?>
<gconf>
<entry name="windowmanager" mtime="1303412016" type="string">
<stringvalue>compiz</stringvalue>
</entry>
</gconf>

View 1 Replies View Related

Ubuntu :: Unable To Get Any Keyboard/mouse Input To Register On Screen?

Dec 19, 2010

I installed Ubuntu a couple of months ago using the Wubi installer.Today, I went to restart my PC, but soon after hitting 'Restart' the computer became unresponsive. I couldn't get any keyboard/mouse input to register on screen, so I did a force shut down by holding down the power button. When I turned the computer back on, I selected Ubuntu from the boot menu. The computer printed some messages that passed by relatively quickly so I'm not sure exactly what they said, but it was something along the lines of "NTFS3: wubibuilder failed to load", and then it went straight back to the boot menu. Tried again and again with no success, so I loaded my Windows 7 install to investigate from there. I found a link to Explore2fs on these forums, so I loaded it up, but it apparently can't locate my Ubuntu partition, or at least I don't see my files. I ran the Wubi installer again to see what it would say, and it tells me that a previous installation was detected, and gives me the option to uninstall. Does anyone have an idea of what went wrong,

View 5 Replies View Related

Slackware :: On KDE Log-in Screen Mouse Pointer And Keyboard Input Not Acknowledged

Oct 10, 2010

I just recently installed Slackware onto a virtual machine(I'm planning on buying a new disc drive and 1 TB HDD with-in the next couple of months and plan on Slackware being my primary OS[right now Mac OS X 10.6 is]), and everything went great.

I then went onto edit the /etc/inittab file in emacs and changed the run-level to 4. I don't know why it's decided that I'd want to boot into KDE when XFCE is installed and in the configuration I selected XFCE but it's not really relevant(I have a WM guide thing open in another tab and will probably be able to change it).

The problem is, as the vague title may suggest, is that it basically freezes when I'm at the log-in screen. The input field for the username is highlighted and blinking, and the cursor it self is visible in the centre of the screen, but it simply doesn't pick up on any input from my keyboard or mouse.

I tried booting up the install CD and logging in as root, mounting sda4(which is the root partition) and editing said file but sudo isn't installed(to my knowledge) on the install disc and when I do the command,

Code:

View 8 Replies View Related

Ubuntu Multimedia :: Casio Keyboard AUX To USB Microphone Input?

Dec 12, 2010

I am trying to get the sounds that are played on the Casio CTK-651 keyboard from the keyboard into ubuntu or windows. I can get the signal, but no sound is played back under Windows when it's connected with an AUX-to-USB connector. When I do it with the MIDI-to-USB connector in windows and ubuntu, whenever I press a key, I get what is programmed into LMMS through connecting in a channel. I can't get the piano or guitar or whatever sound that the keyboard is making into the computer. I can upload some video to show what I'm talking about with the aux connector.

View 1 Replies View Related

OpenSUSE :: Can't Cancel Screensaver Initiation Until After Screen Dims

Aug 28, 2010

I'm running openSUSE 11.3 with an Intel GM965 on-board video card. After upgrading xorg-x11-server to 7.5_1.9.0-62.2.x86_64 from Index of /repositories/X11:/XOrg/openSUSE_11.3/x86_64 after a suggestion to fix a different problem, I noticed that the screensaver seems to work fine as mentioned above. However, I've noticed now that when the screen starts to dim before applying the actual screensaver I apparently can't cancel the screensaver initiation until after the screen finishes dimming (that is, goes completely black) and the screensaver actually starts. No amount of mouse gestures, clicks or key strokes will cancel the screensaver once the screen starts to dim until the screensaver itself starts running.

View 6 Replies View Related

OpenSUSE :: Running Suse 11.2 On A Gateway Lt3103u - Screen Dims With Certain Apps

Mar 23, 2010

Im running suse 11.2 on a gateway lt3103u during boot i noticed the screen goes dim. i thought nothing of it untill i tried to watch *ahem* educational video *ahem*. ive found that no matter what program i use xine vlc or anything else that video sets the screen to dim as if it were in power saving mode. this problem also occurs when i close the lid. it locks the screen into dim mode. in both cases i can use both Fn keys and the power management widget to reset it to bright, but this problem is annoying having to keep turning it back u to see.

View 3 Replies View Related

Ubuntu Multimedia :: Missing Input Drop-down In Gnome-sound-recorder?

Sep 7, 2010

I want to record a streaming-audio (not capture), to use an alarm sound. I opened up gnome-sound-recorder, but I don't see input drop-down menu. I tried Audacity, but it's missing the menu, too.I saw the specification sheet of my laptop, but it only says Mobile Intel� GS45 Express Chipsets, I'm not sure if it manages sound, too, but the sheet doesn't have any information about sound chip set.dd: It seems like I can't change this to 'solved'. I cannot say it is solved, as I don't yet see the drop-down menu in gnome-sound-recorder, but with PulseAudio I can perform the task, so it can be regarded as solved?

View 1 Replies View Related

Debian Multimedia :: No Shadow Under Gnome Panels / Compiz

Nov 8, 2010

Although "Shadow Windows" is set to "any" in CCSM I get no shadow under gnome panels. I tried adding (any) & class=Gnome-panel, but this does neither do anything at all. I'm using Debian Sid amd64, Compiz 0.8.4, X 1.7.7. Video card: ATI Radeon HD4570.

View 12 Replies View Related

Programming :: Read Keyboard Status (not: Wait For Keyboard Input)?

Jun 28, 2011

has bash a command that reads the keyboard status and exits? I want to write a loop of this form:

Code:
while [ 1 ] do
sleep (1)

[code]....

View 14 Replies View Related

Debian Multimedia :: Compiz Refuses To Auto Start Properly (with Gnome)

Apr 16, 2011

How to get compiz to auto-start. What seems to be the generally accepted method (from what a few google searches and the debian wiki tell me) of using gconf-editor and changing the window manager from 'gnome-wm' to 'compiz' in desktop > gnome > session > required_components doesn't change anything. The only method I found that did not involve using a terminal and running 'compiz --replace' every time I boot the computer was to add compiz and fusion-icon to the gnome startup apps, but this causes unwanted flickering (it starts metacity and then replaces it with compiz, ie it's simply automating what I would do with the terminal). Autostarting the fusion-icon alone does not start compiz, although it allows me to start it from it's menu if I right click the icon. Note that I sometimes use fluxbox as well, so starting it on boot isn't really an option either.

Perhaps this can be useful :
compiz:
Installed: 0.8.4-4
Candidate: 0.8.4-4
gnome-session:
Installed: 2.30.2-3
Candidate: 2.30.2-3

View 5 Replies View Related

OpenSUSE Install :: Keyboard Is Dead At Logon Screen (GNOME, KDE4 Etc.)?

Nov 23, 2010

I have updated my 11.3x64 recently and after updateI cannot log into any X session.Keyboard is dead but mouse is moving fine.I tried to change kdm to gdm - no result!All I can do now is - select by mouse "Console Session"and log in to common terminal. In terminal session keyboard works.I can't understand What is it?The most interesting:If I run terminal as a root and run startx - kde desktop is started but the same way - without keyboard!Hardware manager (YAST) shows: /dev/input/event0and shows type of keyboard right: AT Keyboard bla-bla-bla. (Common Genius PS/2 keyboard for 6$ :-))I suspect something wrong with my X11 but can't get what!I did not find xorg.conf in it's standard place. I have found only /etc/X11/xorg.conf.install

View 1 Replies View Related

Ubuntu :: Maverick - Compiz Not Working?

Oct 10, 2010

I've heard that Compiz is not working in Maverick. Is this true? Has it impacted computers with decent graphics cards much, or is it no big deal? I'm kinda confused, because of the Ubiquity thing. Is that replacing compiz?

View 9 Replies View Related

Ubuntu Multimedia :: Dual Screen, Compiz + Colour Calibration With 8600M GT?

Feb 6, 2011

After a few tries, I managed to install Ubuntu on my 3rd generation Macbook Pro (MacbookPro3,1). I installed the proprietary drivers for the Nvidia graphics card and got all the other features working with the information from this page. However, I am having various problems getting the screens working as I would like. When my laptop is at my desk, it is connected to an external 24-inch monitor via DVI, however I regularly disconnect this screen when I go to uni etc.

Ideally I would like Ubuntu to do the following (all of which I can do in Windows and Mac, or the equivalent thereof): Auto-detect when the external monitor is plugged in, set that monitor as the primary screen (with gnome panel etc). And auto-detect when it is unplugged and set the laptop screen as primary.
Support moving windows between both screens Compiz on both screens Separate colour calibration on each screen So far, I have only been able to get a subset of these working at once. I got 2 working alone, without any compiz and the colour calibration only worked on the laptop screen. I got 3 and 4 working without being able to move windows between screens. I have not been able to get 1 working at all - when I disconnect the monitor, I have to tell the nvidia control panel it is gone.

Is there any way to get all four of these things working? I would be willing to sacrifice 3 if 1, 2, and 4 were all working. (I posted this thread to Apple users as well, but I figure there will be more activity here).

View 1 Replies View Related

Debian Multimedia :: Compiz Doesn't Find Manageable Screen?

Oct 13, 2010

I upgrade yesterday my lenny to squeeze.

Now I have some problem with compiz. When I do compiz --replace, I get:

compiz (core) - Fatal: Software rendering detected.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0

Launching fallback window manager

Is it a driver problem? My ATI video card is one of them that works only with open driver and they seems corrrectly installed. glxinfo | grep render, give me a positive result.

View 1 Replies View Related

Debian Multimedia :: Compiz Failed To Manage Screen After Upgrade

Jun 16, 2011

I have upgrade my debian sid and after the new kernel update, xorg can't start because I need to rebuild the module. After the build, xorg start, but not compiz, who say :
[cubox@cubox-fixe:~]$ compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0
Launching fallback window manager

View 5 Replies View Related

Fedora :: X Server - Gnome Screen Saver Cuts In And The System Remains 'as Is' Until 'woken Up' With The Mouse Or Keyboard

Dec 2, 2009

If I remain 'connected' (with the KVM) to the linux machine the gnome screen saver cuts in and the system remains 'as is' until 'woken up' with the mouse or keyboard. However, if I switch to another machine using the KVM, within a short time (maybe even minute or two) the linux machine goes dead. Now it has not crashed, as I can log in from a remote machine and do anything I need from a terminal, but the machine seems not to respond. I can't even use ctrl-alt-fn to switch to a console screen.

I initially tried entering telinit 3 from a remote machine but it made no apparent difference. However, if after telinit 3 I then killed the Xorg process and later issued a telinit 5 the X server restarted, but with a curious black 'notch' at the top of the screen. I am using an NVIDIA GeForce 7600 GS graphics card. I am now adding the backtrace from Xorg.0.log. It seems that when the KVM switches to another machine for more than a very short time the X server crashes.

[Code]....

View 2 Replies View Related

Ubuntu :: Adjusted Input Sound Volume And Maverick Lost The Plot?

May 10, 2011

I'm running Maverick on an HP dv6 laptop. I tried recording a video via VLC with the machine's 'TrueVision' webcam. The result seemed to lack audio, so I had a look in preferences > sound. The input tab had the mute button ticked, so I unticked it and tried adjusting the level (while realising I was probably just configuring the mic port and not the webcam's inbuilt mics).

Then things turned bad: pointer became sluggish, and changes I made to the level slider took ages to be reflected visually on screen. I queued up a pile of clicks on the 'close' button and went away for a while. On return, I was met with a box inviting me to stop a script with some screen-width-long incomprehensible name, which of course I did.

Now the system's in a state which sees windows missing title bars (tho' not menu bars) and (more problematically) the upper and lower bars on the desktop absent. I issued a hibernate command from the terminal in the hope that on waking the system would be 'fixed', but nothing changed. I tried alt-tabbing to access my open applications and close them gracefully but this command is ignored. I have 'zillions' of apps going with unsaved data and am not sure what to try next. I'd be happy just to be able to task switch to each open prog and exit it gracefully then restart. But my knowledge of the command line is such that your help is required =) .

View 6 Replies View Related

Ubuntu Installation :: Cannot Turn On Compiz In Eee Pc 1201n After Upgrade To Maverick

Oct 10, 2010

I upgrade to 10.10 via online upgrade yesterday morning. All seems to run fine, and before the yesterday afternoon upgrade, compiz appears disabled and each time I try to enable it I get the error message.I checked the direct rendering is working. Google Earth works fine also, so all seems to be OK.

My system: Eee PC 1201n, Nvidia Ion, 4 Gb Ram, 320Gb HD

Ubuntu Maverick updated.

View 9 Replies View Related

Debian Multimedia :: Can't Change Keyboard Layout In Gnome 3 Classic

Jun 2, 2015

I installed Gnome 3 Classic but I can't change my input source.in Gnome 3 I can but in Classic version I can't. In Gnome 3 I can see it beside the Clock but In Gnome 3 Classic it doesn't exist. How can I enable it?

View 0 Replies View Related

Debian Multimedia :: Enable Keyboard Layout Indicator In Gnome 3 Classic?

Jun 4, 2015

How can I enable "Keyboard layout indicator" in Gnome 3 Classic?

View 0 Replies View Related

Ubuntu Multimedia :: Gnome Radio - Doesn't Find Any Radio Channels And The Input Channel Is Completely Wrong

May 1, 2010

I have a new install of Karmic on my system with a flyvideo 3000 tv card installed. My problem is that it doesn't find any radio channels and the input channel is completely wrong. I don't have any sound on gnomeradio and can't find the config files to change the input channel. The only input option available to me is dig1 - can anyone point me in the right direction?

I have already read the Howto for this tv card and changed the device to radio0 in the setup. I have setup tvtime perfectly with sound channel as well as with a 5.1 surround configuration. I am missing my favourite radio channel. and I want to get rid of my windows installations once and for all! Update: I did a system update and some things have changed: the radio tower graphic on gnomeradio is now green (I assume it is getting a signal) but no sound yet.

View 2 Replies View Related

Ubuntu Multimedia :: Change Stereo Mic Input To Mono Input?

Nov 4, 2010

I recently got a real fancy unidirectional microphone, but when I go and use it, something strange happens. The mic is a mono mic, but when I record something, it appears to think it's stereo. Instead of having the same thing on both channels, it puts it all in the left channel, and silence on the right channel.

I tried fiddling with alsamixer. In capture (F4), adjusting the "Capture" device has an effect. However, it doesn't do anything useful. Lowering the right channel to zero does nothing, lowering the left channel to zero creates silence, and disabling the right channel creates silence.

In my System>Preferences>Sound (or pavucontrol, or what-have-you), there are "Analog Stereo Input" and "Analog Stereo Duplex" options there, but no "Analog Mono Input" or "Analog Stereo Output + Analog Mono Input" options (the latter being ideal).

Something interesting, though, if I do this:
Code:
arecord -r 96000 -D pulse -c 1 -vv -V mono /dev/null
it works correctly and outputs on both channels. But if I do
Code:
arecord -r 96000 -D pulse -c 2 -vv -V stereo /dev/null
then it's back to the same behavior. The VU meter on the second command shows the left channel going up and down as I make noise, but the right one always at zero.

The machine does have a crap internal mic built in to the screen bezel. If I do either of the above commands, they both work correctly. The stereo VU shows the same activity for both channels.

The machine is a Eee 1015PED, which has Intel integrated sound. Something probably insignificant is that the mic has a 1/4 inch mono plug, and to get it to plug into the Eee, I needed to get a 1/4 female to 1/8 male adapter. The mic's 1/4 plug is mono (duh) and therefore two-conductor, but the adapter I got is stereo, or three conductor (L, R, GND). I don't know if this is tripping something in hardware to tell it it's stereo or something.

I tried the mic on my desktop, which has a SB Audigy 4 (the non-pro flavor) and that has the "Analog Mono Input" function, so that works fine. Is there some way to turn this stereo input into mono input?

View 1 Replies View Related

Ubuntu Multimedia :: Keyboard Blocked After A Veetle Full Screen?

May 14, 2010

im running ubuntu lucid here, and on both firefox and chrome.....after i watch somthing in a full screen...i have to restart the browser to be able to type somthing with keyboard!
its wierd, i dont know if its veetle problem or ubuntu problem!anyone is facing this issue?

View 3 Replies View Related

Ubuntu Multimedia :: Change The From Mic Input To Line Input?

May 1, 2010

I installed Lucid. I used to have Ubuntu 9.10 and to connect my iPod to my laptop's speakers. There was an option in 9.10 in the Sound Options to change the Mic Input into a Line Input. But now unfortunately I can't find it in Lucid have only 2 audio ports in the laptop: Headphone port, Mic port.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved