Slackware :: Freeze On Large File Copy With NFS?

Mar 22, 2010

i don't know if this is a slackware related issue but i have the following problem.I'm running a slackware64-current on my system. For my private data I'm using a QNAP NAS (Some ARM CPU with linux kernel 2.6.22), the file shares provided by NFS. I mount them withmount -t nfs 192.168.0.2:/Public /mnt/qnapWorks fine, no problems.But now, if i try to copy some large files ( > 1GiB) to the NAS share, sometimes the systems completely freezes during the copy process. I have to do a hard reset to bring the system back to work

View 5 Replies


ADVERTISEMENT

General :: Best Way To Copy A Large File Over NFS?

Aug 24, 2011

I want to transfer a huge file (60GB) over the NFS network on linux. Is cp the best option?

View 1 Replies View Related

General :: Can't Copy Large File?

Mar 26, 2010

I'm trying to copy a 6Gb file across from my laptop to an external usb drive but it quits at about 4.2Gb every time with a "file size limit exceeded" error. i have checked the output of ulimit -a and there is no limit there on the file size. I'm using the Slax live Cd for this as it always gets the job done

View 8 Replies View Related

Ubuntu :: Can't Copy A Large 30gig Image File?

Jan 3, 2010

I have some large image files that are 30 gig and more. I am running Ubuntu 9.10 whenever I try to copy one of these files to another drive I get a error saying the file is too large. I am trying to copy from an external Hard Drive or a slave drive does the same thing. I have a friend who has expressed the same issue. This must be a widespread bug.

View 9 Replies View Related

General :: Monitoring Copy Progress Of A Large File?

Sep 15, 2010

Is there a clever way to monitor the progress (as percentage or hash) of copying a large file (using pv could be an option)?Like monitoring the progress of a copy command such as this:Code:cp linux.iso /tmp/

View 2 Replies View Related

Ubuntu :: Large File Copy Operations Freezing Up Computer?

Sep 9, 2010

Ok so I'm running Mint (not full Ubuntu), and I'm not sure if this is a problem with the FS, Kernel, what not.I'm running Linux Mint 9 - x64 - kernel 2.6.35.14 - and when I did a large file copy operation (9GB) it froze up my system until the copy operation was done. I couldn't even use Pidgin, Mozilla, or anything, when trying to open up another Terminal it froze as well.

View 1 Replies View Related

Ubuntu :: "Error Splicing File: File Too Large" - Copy To A 500G USB Drive?

Sep 10, 2010

I have seen this 3 times now - it's an updated Lucid with EXT4, trying to copy to a 500G USB drive?

View 3 Replies View Related

Slackware :: NFS - How To Speed Up Large File/folder Transfer - Write - Speeds?

Dec 13, 2010

About NFS.

Server:

Client(s):

Code:

I have followed Robbie Workmans' HowTo [url]

Reading and writing works absolutely fine with small files but large files are tediously slow in writing to the server. (rw,no_subtree_check) are options in exported directories.

What is your experience with NFS and how can I speed up large file/folder transfer(write) speeds?

View 5 Replies View Related

Software :: Evince Causes Entire System To Completely Freeze Up When A Large Pdf Is Open?

Jun 16, 2011

I'm running Debian Wheezy on a laptop with an i3 380M and 4GB of DDR3 1066 RAM. Whenever I open a relatively large (~80MB) pdf in evince, my system will continue running perfectly fine for a few minutes and then at some point it will just completely freeze up. The mouse cursor doesn't even respond, and I have to do a hard reboot to get the system running again.

View 5 Replies View Related

Slackware :: Can't Copy The File To Python As The Versions Differ

Jun 16, 2011

I am trying to install a module in openerp 6 It requires Pyuno that ships with libre/open -office If i go import uno -- no module called uno but when I go to the /usr/lib64/libreoffice/base3.4/programs and python import uno it works

I cant copy the file to python as the versions differ

View 3 Replies View Related

Ubuntu :: How To Copy And Paste Large Chunks Of Data

Jun 16, 2011

I want to copy about 40GB - to a partiton. There are two hard drives in my box one won't boot but I can aaccess it and mount partitions and I aim to move data from it to a new bootable hard drive. Doing a simple cp copy command may not be the best way to copy and paste such a large chunk? Also I want to backup the data I plan to copy/paste using a USB hard drive to backup. But I could also paste data from the backup to the new drive instead of from old internal hd to new hd. - that's another option.

View 1 Replies View Related

OpenSUSE :: Fix Dolphin Freeze Ups For Cut/copy And Move -for 11.3?

Sep 4, 2010

For anyone experiencing dolphin freeze ups after updating to KDE 4.5.00 For openSUSE 11.3 users experiencing Dolphin freezing up when cut and copying use the following link to update dbus-1:

For 64-bit users:
http://download.opensuse.org/reposit...7.1.x86_64.rpm
For 32-bit users:
http://download.opensuse.org/reposit...-27.1.i586.rpm

View 9 Replies View Related

Ubuntu :: Copy - Paste Causes 1 Or 2 Second Freeze Of Touchpad

Jul 7, 2010

I'm using Ubuntu 10.04 64bit on a Toshiba Satellite L500 series laptop.

Every time I press ctrl c or v the touchpad freezes for a few seconds and the cursor won't move.

View 2 Replies View Related

Ubuntu Networking :: Slow Network In When Copy Large Files From Main Desktop Pc To Mediaplayer?

Dec 28, 2010

I have just rewired my LAN using Cat 6 cables. Download- and Upload speeds to my main machine are great :However, it seems my LAN speed is very slow. when I copy large files from my main desktop pc to my mediaplayer, I only reach a speed of 3,7 MB/s in Ubuntu 10.10 using SMB protocol to connect to mediaplayer. I use a Sitecom WL351 Router that works fine as far as I can see. Using my dualboot Windows 7 I can copy the same large files using same setup (same pc to same mediaplayer) I can copy with almost 10 MB/s. I appreciate a little protocol overhead in Ubuntu, but this seems to be a little too much

View 1 Replies View Related

General :: Copy A Read-Only File And Make The Copy Writable With A Single Cp Command?

Mar 1, 2011

How to copy a Read-Only file in Linux and make the copy writable with a single cp command in Linux (Ubuntu 10.04)? The --no-preserve and --preserve seemed to be good candidates, except that they should "and" the mode flags, while what I am looking for is something that will "or" them (add +w mode).

More details: I have to import a repository from GIT to Perforce. I want that all Perforce depot files are Read-Only (that is how Perforce was designed), while all other files that were derived/copied from depot files are writable. Currently if a Makefile tries to copy a Read-Only file then the derived file will also be Read-only. This leads to build-errors when cp tries to overwrite Read-Only file second time. Of course the --force is a workaround here but then the derived file is also Read-Only. Also I do not want to mess with "chmod" after each "cp" command - I will do that only as the last resort.

View 1 Replies View Related

Slackware :: Get Ftp To Download Large Files?

May 29, 2010

I am using xfce desktop and terminal.

1) How do i check to see what is the default FTP Client used by Slackware12.2 when i type:
$ftp

2) How do i get ftp to download large files? > 2gb from ftp server elektroni.phys.tut.fi or any ftp server.

View 14 Replies View Related

General :: View A Particular Ten Lines In A Large File Where Can't Open The File In Vi

May 12, 2010

I am using RHEL 5.I have a very large test file which cannot be opened in vi.The content of the file has some 8000 lines.I need to view ten lines between 5680 to 5690.How can i view these particular lines in a large file.what is command and option i need to use.

View 1 Replies View Related

Slackware :: Freeze In 13.37

May 1, 2011

I have 13.37 installed and am thinking of changing to it but I have had two system freezes with it. This never happens on 13.0. Once was when I was selecting reboot from kde and another time I was closing another program - I forget which.

I have this in kdm log and xorg.log

Quote:

Should I try the nvidia driver?

View 14 Replies View Related

Slackware :: Is The Next 32B - 14 - Going To Have Large Memory Capability Enabled?

Jan 4, 2011

Just wondering now I see computers everywhere with 6G of ram or more if the new 32b kernels are going to be setup for large amounts of ram or will they still need to be recompiled? Also will there be better ssd support for things like "trim"? I know you edit the fstab to get the Linux version of trim but I am just wondering if stuff like that will just be automatic or if I will continue to need to tweak. I like to tweak but sometimes its the lack of need for tweaking that makes me like slack.

View 14 Replies View Related

Slackware :: 13.37 Freeze On X Start?

May 23, 2011

Hardware - Compaq615, video - radeon hd 3200 After clean installation of 13.37 x64, proprietary ati driver, multilib. xfce.

All was o.k., video rendering was direct etc., etc. then i rebooted, and system freeze at startx. Ctrl-Alt-Backspace not working, hard reset needed. I tried xorgconfig, Xorg -configure, aticinfig --initial, deleting /etc/X11/xorg.conf with no result at all. /var/log/Xorg.0.log empty. When i do startx from root - all is o.k, writing from root now.

View 14 Replies View Related

Slackware :: Large Partition Fsck On Shutdown Instead Of Boot?

Sep 15, 2010

Got tired of long waits for fsck on very large partitions.Here's a script to fsck selected partitions every 'N' shutdowns. No more boot delays for fsck (unless something is really wrong

Update1: On my system '/usr/libexec/gam_server' (gamin component used by xfce) prevented /home from being unmounted. I changed
Code:

[code]...

View 4 Replies View Related

Slackware :: Vim Freeze At Startup When In Ssh Session

Jan 16, 2011

I have been using vim for years without problem but today I have met one weird scenario which I can't solve it after troubleshoot for the whole day and google around. This happen to my 2 machine at home which both installed with Slackware 13.1..I just got my laptop done setup with Slackware 13.1 and I ssh from my laptop to my desktop that have vim installed. I use one of my laptop virtual console to do the ssh login to that desktop.

And using vim in that laptop virtual console and Konsole itself, all works fine. The problem only occur when I ssh into the desktop using a virtual console.It seems like if I supply the vim specifically a .vimrc, it will work fine. It seems like it's taking forever to find the .vimrc file. But if I remove that .vimrc, it will also freeze. If I create a new user in that desktop and ssh again and then do vim, it will also freeze.Any one face this strange problem before ? I know I can still use Konsole to ssh and do vim, but I wish to solve this and since vim is been there for so long, I think this problem will most likely faced by someone before.

View 7 Replies View Related

Slackware :: Amarok Hangs At 10% When Scanning Large Music Collection?

Jun 6, 2010

After installing slackware 13.1 I start up amarok and when I go in and configure the settings and it starts to scan the folder and it either hangs at 10%, stops responding all together or crashes, the library is about 130 gigs of mp3s. I do not know where to start on this one. Amarok version 2.3.0

View 4 Replies View Related

Slackware :: Boot In Clean Copy Of Slackware 13?

Oct 9, 2010

A friend of mine threw me an OLPC (original model with 1GB of storage) that he was trying to put slackware in. He managed to install a minimal installation, but now it asks for the e2fstools (the stuff to run fsck on ext(2/3/4) partitions) which he didn't install (he formatted the "disk" as a single jfs partition). Is there any reason why it would want to have those tools given that there are no ext(2/3/4) type filesystems in that machine? And is there any specific init script (or udev rule) that can be edited to make it not try and check ext(2/3/4) partitions?

View 4 Replies View Related

Slackware :: Fresh Install - Xfce Freeze

May 28, 2011

I have just installed Slackware 13.37. After the install - when executing startx for the first time, the xfce desktop freezes when its almost (?) fully loaded.

While loading I can move mouse and if I hit caps_lock the lamp at the keyboard turns on and off.

In the setup I choosed to use vesa - allthoug I afterr that even tried to boot from lilo into vga-mode.

I am, a litle rusty after have been brainwashed through Ubuntu for a few years (sigh) - so I really am not sure which config-file I should edit, and xorg.conf seems to be empty.

View 2 Replies View Related

Slackware :: Intel Celeron 750 Installation Freeze?

Nov 1, 2010

I've been trying to install Slackware on my Intel Celeron 750, but it keeps freezing during the installation.

It usually freezes during a screen that seems to show a bunch of coordinates and processes. The last one looks like this:

Code:
[<c10035be>] kernel_thread_helper+0x6/1x10

View 3 Replies View Related

General :: Slackware 13.1 - Oftenly Freeze On It's Own While Use GUI Session - KDE4

Apr 6, 2011

I'm using slackware 13.1 now (dual boot with win7) and recently, my slack oftenly freeze on it's own while i use GUI session (KDE4) i can't use ctrl+alt+del or prtsc+alt+REISUB it's just like my notebook absolutely freeze.

View 11 Replies View Related

Slackware :: Total Freeze After Installing Wicd Using Slackpkg

Nov 23, 2010

I have installed Slackware 13.1 without a problem and have a working wired ethernet connection. However I need to set up wireless but each time I try to do this using wicd I have a total system crash during the start up screens at the very last line before the welcome line appears.

Nothing works to resolve it, and I need to press and hold the start button and restart. I have checked the md5sum, installed the software again several times but the same happens each time which results in me having to reinstall.

I have installed wicd using slackpkg update, then slackpkg install wicd.

I have also tried downloading wicd from the slackware /extras folder and installing it on its own. Either way the same happens.

I have tried various manual approaches to setting up wireless following various links but again without success.

I now have a clean install again but am not wanting the same to happen.

Can anyone suggest what I might need to do?

I am using an intel Pentium 4, 2.53 ghz, 512Mb ram, GeForce4 MX 440.

View 13 Replies View Related

Slackware :: When Run Startx Or Startxfce4 Xfce Freeze During Startup

Mar 10, 2011

I have installed Slackware and chose Xfce as my primer desktop. but when I run startx or startxfce4 xfce freeze during startup what to do?

View 14 Replies View Related

Slackware :: Compiling Large Slackbuilds - Error-message - Not Enough Space Left On Device

Aug 20, 2010

I am currently running slackware 12.2 on a 25 GB partition. I like to use slackbuilds, but when I try to compile larger tarballs (like abiword, or a patched version of Ghostscript as I did today) I receive an error-message: 'Not enough space left on device'. I think the size of the partition must be big enough (I never got this message when compiling with Linux From Scratch). I think it has something to do with the size of my /tmp directory, but I don't know how to fix this. Is there a way to solve the problem, so that I could be able to use slackbuild-scripts?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved