Slackware :: ATI Catalyst 10.7 Black Border On 13.1?

Aug 2, 2010

SOLVED: Changed the underscan settings in the Catalyst Control Center. I just installed the ATI catalyst driver 10.7, now there is a black border about 1" on all 4 sides that does not want to go away. Below is my xorg.conf

Code:
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection

[Code]...

View 3 Replies


ADVERTISEMENT

Ubuntu :: Displaying 1in Black Border Within Display?

Feb 26, 2010

Has anyone seen or heard of the following problem? I have a 1in black border surrounding my display. I've been running google searches all day without much luck. My current setup is as follows: Ubuntu 9.10 (64-bit), 24in asus lcd, Radeon 5770, amd phenom 2 x4, ddr3 4gb, gigabyte mb. I noticed the border while running the live cd. I figured it had something to do with the video drivers. Last night I installed ATI's linux driver 10.2. I'm getting my preferred resolution of 1920x1080 over dvi. But i'm not able to use my full 24in. It's like using a 20in lcd.

View 6 Replies View Related

OpenSUSE Hardware :: 11.4 X64 Black Border Around Screen At Native Resolution?

Jun 21, 2011

I'm setting up a Dell Inspiron One 2305 and I can't get the native monitor resolution to work without black borders. I'm also experiencing blurry text in Firefox (not sure if this is related). At most other resolutions it will expand to the edges of the monitor fully. Note that the desktop area doesn't extend into the border. I tried glxgears and noticed that it was only pulling 60fps -- figuring it needed drivers I installed the latest ATI drivers. On reboot I was given more options for resolutions however the native one still doesn't work properly. I looked around for troubleshooting tips and looked into xrandr output.

Code:

Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1920 x 1920
DFP1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.0 + 50.0 30.0 25.0 30.0
1776x1000 50.0 59.9 25.0 30.0

[code]....

Using 'configure display settings' in Gnome, any time I picked a resolution that was 50, it would cause the borders. Any time I picked a resolution that was 60 AND xrandr listed a 60 and 59.9 and said 60 was the selected one, the borders would come back for those too.

So I tried

xrandr --output DFP1 --mode 1920x1080 --rate 59.9

Seeing as every resolution with 59.9 worked. However... This still resulted in borders.

View 2 Replies View Related

Ubuntu Multimedia :: Black Border With 5770 And Can't Find Scaling Options ?

May 14, 2010

I upgraded from 9.10 to 10.4 and I get the black border around my desktop. I can't find the scaling option and tried installing the proprietary drivers within Ubuntu and still nothing.

View 4 Replies View Related

Ubuntu :: Computer / Monitor Resolution Mismatch - Huge Black Border On Screen?

Nov 14, 2010

on a 6-7 years old compaq laptop, connected to a brand new hp monitor i am having a mismatch with computer/monitor resolution.

before i had ubuntu 10.04 which could only run in x's safe graphics mode - allowing for full screen resolution but with handicapped graphics - for example videos fullscreen would be quirky and run with cpu at 100%, something which was no problem before 10.04.

then i tried ubuntu 10.10 and later lubuntu 10.10 (which had exactly the same problem); the monitor is running 1440x900 while the computer is rendering to only 1024x768 - leaving a huge black border on right and bottom of screen. the gfx is still crippled; videos fullscreen is quirky as before.

View 3 Replies View Related

Ubuntu Multimedia :: Turn Black Border Areas Of Scanned Book To White One

Jul 22, 2011

I just scanned a book recently and as what happens in these situations , the borders get dark I just looking for a simple way (prefer command line) to solve this problem maybe, crop pictures for cutting out the borders and then change the dimension (NOT MEAN STRETCH) to regain original size I am not sure , but any others ways that can turn black border areas to white one is fine with me.

View 1 Replies View Related

OpenSUSE Hardware :: WSXGA+ - Shows The Desktop With A 1 Inch Wide Black Area Along The Right Border Of The Screen

Jan 18, 2010

openSUSE 11.2 i586, ASUS P3-P5G43 Rev. R1.04G Intel Core2 Duo CPU E8400@3.00GHz, Intel G45/G43 Chipset The Problem: The screen is for the WSXGA+ (1680x1050) standard. This resolution was detected, at the initial install and later with sax2. It shows the desktop with a 1 inch wide black area along the right border of the screen and that is exactly what is missing at the left border (i.e. invisible). It is like the desktop is shifted to the left of the screen. As far as it is visible the image is crisp and clean. Lowering the resolution to 1280x960 works ok, but the aspect ratio is no longer correct. I have checked the archives and found Intel integrated graphics - openSUSE Forums but trying different hints from the thread did not help.

[Code]...

View 8 Replies View Related

Ubuntu Multimedia :: Ati Catalyst - Screen Goes Black For A Couple Of Seconds When Opening Avi (divx Or Mjpeg)

Feb 21, 2010

On a Karmic desktop with a Radeon 2600 hd video card, my screen goes black for a couple of seconds when opening an avi (divx or mjpeg).The video starts playing immediatly but I only see a black screen. Using Movie Player, its a black screen window, using vlc or gmplayer or mplayer ,the all screen goes black. It does not happen if I use the ati open source driver (but then flash full screen crashes...). I just installed the latest ati catalyst (10.2) and the problem remains.....

View 1 Replies View Related

Slackware :: No 3D In KDE With Catalyst 10.6?

Jul 28, 2010

I've been having issues with 3D using the ATI catalyst driver since I started using Slackware (since version 12.2). I've had a few different graphics problems and through trial and error I've discovered they all start with install the proprietary ATI driver. I installed the Gnome Slackbuild to try it out, and managed to get 3D (ie. compiz) working flawlessly there, but for some reason I cannot get KDE visual effects to do anything while using this driver (although they work fine with the open source radeonhd driver). Any thoughts as to why KDE and the ATI driver are being un-cooperative with each other?

Secondly, I created a initrd and changed to use the generic kernel instead of the huge kernel. It doesn't appear the the ATI driver loads properly with the generic kernel as the 3D doesn't work at all and the output of fglrx gives lots of weird error messages about how the driver hasn't loaded properly (or at all)? So where would I go to make sure the fglrx module is loaded by the kernel?

View 5 Replies View Related

Slackware :: Can Install Catalyst 10.4 On 13.0 64

May 24, 2010

I'm using ATI Radeon 4850 graphic card but cannot bring out its full configuration (one of them, I try to enable s-video out) without installing its native Catalyst driver, which is ver 10.4. Is this version compatible with Slackware 13.0 64?

View 2 Replies View Related

Slackware :: Catalyst 10.3 Won't Compile

Mar 26, 2010

I've downloaded and tried to install the newest ATI driver, but I get this error when I try to build packages:

Code:
./packages/Slackware/ati-packager.sh: line 56: unexpected EOF while looking for matching `]'
./packages/Slackware/ati-packager.sh: line 406: syntax error: unexpected end of file

I extracted the package and am pretty sure I found the source of the error (a missing ]) but I'm unsure of how to repackage the installer after correcting it. I did a google search and at least one other person has had this error: [URL]...

View 5 Replies View Related

Slackware :: Catalyst 9.11 And 9.12 Driver - Buildpkg Fails On New Kernel

Jan 12, 2010

I have Slackware 13.0 installed with the newest stable kernel (2.6.32.3) on an hp notebook with ati hd3200 igp. What happens is that when I try to buildpkg the catalyst drivers, it fails on the new kernel but not on the original one. I've been searching for a solution for a few days now. found a few that involved patching some files, but none seem to work or I can't make them work. I could probably use the binary installer but I would prefer not to.

Here's the output:
Code:
sh ./ati-driver-installer-9-11-x86.x86_64.run --buildpkg Slackware/Only_Module
Created directory fglrx-install.hokais
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.672......
ATI Technologies Linux Driver Installer/Packager
Generating package: Slackware/Only_Module .....

View 3 Replies View Related

Fedora X86/64bit :: Catalyst 10.7 And 13x64 - "no Such File Or Directory Couldn't Create Cookie" Get A Black Screen

Jul 26, 2010

I just installed the 10.7 drivers (no workaround they just installed). And now after boot i get a black screen. I have a Radeon HD 4850 there is a way to fix this without reinstalling the OS. Ok in recovery mode when I type Startx i get: line 143: /usr/bin/mcookie: no such file or directory Couldn't create cookie Then if i type Xorg -configure i get : Fatal server error: Cannot open log file "/var/log/Xorg.0.log" Please consult the fedora project support.

View 14 Replies View Related

Slackware :: Black Screen After Logout?

Jan 7, 2010

After updating my Slackware-Current (there was kernel and glibc package updates), I just get a black screen with a blinking "_" in the top-left corner when I logout.

I checked /var/log/kdm.log and found these errors:

Code:

I've found a workaround: uncommenting "TerminateServer=true" in kdmrc.

View 14 Replies View Related

Slackware :: KDE Black Screen On Maximize?

Jul 16, 2011

I'm running Slackware 13.37 64bit on an HP 2945 Laptop. KDE 4.5.5. I have a NVIDIA driver installed (270.41.06) and running KDE at 1200 x 800. I've upgraded to 13.37 about 2 months ago. I started noticing an issue with the windows in KDE pretty much upon start up. If I have multiple windows open and try to maximize a window or drag a corner of the window to a large size, the screen within the windows goes black. Also any menu in the windows goes black. If I resize back down the issue goes away. Or as stated before, if I have only one window open the problem doesn't exist.

View 2 Replies View Related

Slackware :: Screen Goes Black On Startup?

Jul 19, 2011

HP laptop with Intel graphicsunning Slackware current with a 2.6.38.7-smp kernel.Booting with the "nomodeset" kernel parm works but X gets stuck with a 1024x768 resolution. When booting without, the screen goes black after a few pages scroll by, just at the point where the console switches to a higher resolution. Changing to a different console didn't help, so I blindly log on and type startx, and the screen comes back to life with KDE running at the higher 1366x768 resolution, I try a few apps, the webcam, suspend to RAM, resume, and everything is now working flawlessly so it doesn't look like an X issue.At this point I can change to another console (or exit KDE altogether) and the screen is back on at the higher resolution. Looking at the X log and some dmesg output makes it seem that starting X possibly replaces, reloads or unloads a driver? If this is the case, how can I prevent the conflicting driver from loading in the first place?Quote:

dmesg |grep drm
[ 11.481967] [drm] Initialized drm 1.1.0 20060810
[ 11.637941] [drm] MTRR allocation failed. Graphics performance may suffer.

[code]...

View 4 Replies View Related

Slackware :: Run Startx Only Getting Black Screen

Apr 28, 2011

I did a fresh install of Slackware64 13.37. All went well. I download the latest Ati video drivers, 11.4, and build the slackware package. Install, and run aticonfig --initial all good. But when I run startx I only get a black screen

View 13 Replies View Related

Slackware :: Black Screen At KDE Logout With 13.37 64-bit And VirtualBox

May 3, 2011

I'm trying to run Slackware 13.37 64-bit in a VirtualBox virtual machine. My VirtualBox version is 3.2.12. I had to disable compositing to keep the X-Server from reporting a segfault.Now the problem is that on logout from KDE I get a completely black screen. I can switch to a console session and type commands to get the login screen again.

telinit 3
telinit 4

I tried editing "kdmrc" to add the line "TerminateServer=true" but it had no effect on the problem.I had this working with Slackware 13.1 at one time, but I can't seem to get it working properly now even without desktop effects.I'm trying to avoid changing my VirtualBox software since each version seems to just introduce new and different bugs. The 4.X versions are not yet very stable.

View 1 Replies View Related

Slackware :: Black Screen On Bootup After A Few Lines (13.37)

May 25, 2011

i just installed slackware 13.37 which worked fine but when i boot it up it runs a number of lines and then the screen just goes black... i can login as root blindly and start x (i THINK, judging from hdd led)... but screen stays black... its a laptop and closing/opening the lid doesnt work either...

i am dualbooting with slack 13.1 which runs fine... it switches screen res at some point during boot (font is smaller) and i would say that is the point where the screen goes black in 13.37...

View 14 Replies View Related

Slackware :: Black Screen When Trying To Go From GUI To Virtual Terminal

Jul 28, 2011

I am new to slackware, but not new to linux. I recently installed slackware 13.37, and am enjoying it very much so far. The most annoying problem I currently have is that, after starting X, I cannot switch to a virtual terminal or even end X without having a problem. For instance, from the GUI if I hit ctrl-alt-F1, instead of going to the 1st virtual terminal, the screen fades quickly to black and does not return. I have not been able to make any progress on this problem, so any input would be greatly appreciated.The only thing worth noting really is that I'm using Fluxbox as my default window manager. Other than that I haven't done a lot of modifications to the base system other than installing some basic packages, but I had this problem since booting directly after installation of the os.

View 14 Replies View Related

Slackware :: Black Window Frame In Xfce - Sometimes

May 11, 2011

When starting Xfce, there's a ~50% chance that the theme (no matter which one) doesn't work properly and all the window frames are black. Sometimes it does work, but I can't reproduce either - it's random.

I've had this problem before on 13.1 and somehow managed to make it disappear (I switched from KDE and blamed it on me not getting all the settings right immediately). However, after installing 13.37 and starting with a clean homedir, it happens more often that it did on 13.1 and I just can't get rid of it.

PS: The whole Slackware / X11 / Xfce setup is fairly generic, but I do use the binary Nvidia driver from SBo and I have two TFTs configured as separate X11 screens.

View 2 Replies View Related

Slackware :: 13.1 Get Black Screen Instead Of Login Window

Nov 27, 2010

Got my Slack running on vostro 1310 for a while now. But just Today... first for what ever reason my wifi stopped to work (at boot time) even though interface was up as usual, driver was loaded, supplicant has not been touched etc. So I wired up a LAN cable and the at boot time I saw an information from eth0 that packet length is 0 and cannot be parsed (great no network at all). Tried to investigate the problem on a different machine, and one of the suggestions I've found was to set router to no security and see if wireless will connect. I thought that it would be a good idea to reboot the machine to attach to the rooter at boot time and no eth0,wlan1 tries to connect to the network and then I get a black screen instead of login window

View 4 Replies View Related

Slackware :: 13.37 Black T-Shirt Limited Edition?

Apr 28, 2011

The limited edition of Slackware 13.37 Black T-Shirt is now ready at Slackware Store

View 14 Replies View Related

Slackware :: Slim - Default Theme Vs Black

Jan 26, 2010

I'm trying out slim - the login replacement for gdm/kdm/xdm. I find that when I use the special supplied Slackware theme, I can't see the cycling of the session names as I repeatedly hit F1. But when I use the default theme they show up just fine. Is there some special tweak to /etc/slim.conf that will make the session names visible using the Slackware theme?

View 1 Replies View Related

Slackware :: Can't Boot - Start X The Screen Goes Black And Freezes

Apr 6, 2011

I installed Slackware 13.1 a little bit ago, played around with it, performed an upgrade with Slackpkg, messed around with some settings, and chose a new theme. I had set the runlevel to 4 and when I rebooted after choosing a new login theme the screen just went black at the point where the login prompt should have appeared. I couldn't even get into the CLI. Using a LiveCD, I set the run level to 3 again and was able to log in, but when I try to start X the screen goes black and freezes again, so I believe my new login theme is the culprit. Is there a way to change to the default login theme from the CLI?

View 14 Replies View Related

Slackware :: StartX Gives Black Screen With Blinking Button

Jan 26, 2010

I have just installed slackware. I have done
Code:
Xorg -configure
And chosen kde for init program while installing slackware. But when I type
Code:
Xorg -config -retro
or
Code:
startx
I get black screen with blinking button on monitor and keyboard. Obviously KDE doesn't start.

View 14 Replies View Related

Slackware :: Black Screen After StartX - Keyboard Not Responding

Mar 24, 2010

I put Slackware 13 and the scenarios is:

1. I start the computer and after startx I got black screen, the keyboard is not responding the led of the display is yellow etc. Now I reset the computer,
2. Booting Windoze
3. Choose Restart not Shutdown from Windoze
4. Booting Slack
5. startx works fine, the X server is starting and working great.

I have Radeon 9500. I configured X server with 3D accel over 2500 FPS on glxgears. The same problem persists even with X server VESA configured.

View 7 Replies View Related

Slackware :: Window Contents Turn Black When Maximized In KDE?

Jul 4, 2011

On Slackware64 13.37 with a Geforce 6150LE + Nvidia 275.09.07, the contents of a window turn black when I maximize it.

For now I've worked around it by disabling desktop effects.

View 6 Replies View Related

Slackware :: Black Screen With Radeon Driver (asus X1650xt)?

Jun 19, 2010

i have an asus radeon x1650xt vga, i can use the latest radeon driver in ubuntu 10.04 and also in the newest fedora but in slackware 13.1 i get the same black screen i used to get with older ubuntu, fedora and other distros. i can only use slackware with the vesa driver, what could be the problem...here is my /var/log/Xorg.0.log

Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04

[code]...

View 13 Replies View Related

Slackware :: EPSON CX6600 On 13.1 - Printing A Page Filled With Black Ink ?

Jun 30, 2010

I've been able to print with other distros (Mint, Sabayon) without problem so I'm guessing the way my printer is configured with Slack must be wrong. My CX6600 is recognized and when I try to print, it responds, but by printing a page filled with black ink. I have tried printing in Okular, Firefox and OpenOffice with the same result.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved