Slackware :: 13.1 Get Black Screen Instead Of Login Window
Nov 27, 2010
Got my Slack running on vostro 1310 for a while now. But just Today... first for what ever reason my wifi stopped to work (at boot time) even though interface was up as usual, driver was loaded, supplicant has not been touched etc. So I wired up a LAN cable and the at boot time I saw an information from eth0 that packet length is 0 and cannot be parsed (great no network at all). Tried to investigate the problem on a different machine, and one of the suggestions I've found was to set router to no security and see if wireless will connect. I thought that it would be a good idea to reboot the machine to attach to the rooter at boot time and no eth0,wlan1 tries to connect to the network and then I get a black screen instead of login window
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
Iam facing a weird problem with ubuntu since last week... Starting system-->selecting ubuntu from grub menu-->ubuntu splash screen comes and it loads fully-->black screen is displayed instead of login window.. Restarting the system and the prob is gone..able to login properly..
This problem is ocurring randomly..sometimes i can login in 1st attempt properly,other times i have to restart the system twice or even thrice to get to the login screen.. what can be the possible reason to this...I have not done any updates also..
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
I have problem in installation suse linux9.3 in my computer. I finish the setup steps and remove cd from cdrom and configure my network and my graphic card. The linux don't open suse linux desktop. It give to me black window and don't enter.
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
I just bought this desktop from my friend and it runs win 7 and ubuntu 10.04. it worked very well the first two days until I changed the hostname of the system.
I did like: hostname myNewName
And everything worked fine. The problem now is when I start ubuntu and and reach username and password screen , I enter my password to login the screen becomes black and return me again to the screen where I put my password again. If I entered wrong password , the system message stating wrong password. On the other hand, when I try to run ubuntu from live-cd I can login easily and access my account.
My friend told me he removed Naultius package and reinstall it for some reason before he gave it to me. Note windows 7 is working properly.
I have used Ubuntu since 7-4; I now have 10.4. However, in the last week I have been taken to the login screen three times. This could be potentially calamitous. Ctrl+Alt +Backspace have by default been disable since 9-4. There is no way I am pressing atl+Prtscr +K. I wonder if there is a new zap command in 10.4, and if so, how to disable it. I have never found the need to go back back to the login window. I am generally using the command line when doing this.
When starting Xfce, there's a ~50% chance that the theme (no matter which one) doesn't work properly and all the window frames are black. Sometimes it does work, but I can't reproduce either - it's random.
I've had this problem before on 13.1 and somehow managed to make it disappear (I switched from KDE and blamed it on me not getting all the settings right immediately). However, after installing 13.37 and starting with a clean homedir, it happens more often that it did on 13.1 and I just can't get rid of it.
PS: The whole Slackware / X11 / Xfce setup is fairly generic, but I do use the binary Nvidia driver from SBo and I have two TFTs configured as separate X11 screens.
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
I've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
This problem started within the last few minutes. I run a program in my browser that uploads data from my machine (ubuntu) to another machine (Fedora 13), for manipulation and then spits back the data that does not match our standardised information.
When I tried to run it a few minutes ago, it seemed to take a long time to make the connection. I went back and checked the machine, everything was connected and fine. I decided to reboot the machine from within KDE and then try again. Same result. I went to the machine again and tried to login through KDE, the screen goes black for a few seconds and then returns me to the login screen. I switched over to a virtual terminal and was able to login using the same credentials. I checked the .xsessions-errors file and this is what I am seeing:
I have a few machines set up and running Red Hat 4.1.2-42 in a computer lab. I also have a single test machine running the same version. The machines in the lab work flawlessly.However, when machines are on the login screen, they don't go into power saving mode. That is, after a certain amount of inactivity, the idle login screen should be replaced by a black power saving screen. But this does not happen. The monitor should go into standby (the little green light becomes orange, and the whole screen shuts down until you move your mouse again...you know the drill).I know this is supposed to be the case because this works on the test machine. It just doesn't work in the lab. I think it has something to do with gdm, but I can't for the life of me figure it out.
I've been playing around with two tiling window managers, scrotwm, and xmonad. I like xmonad better, but that's not the point. The point is that they both produce these strange black bars at the bottom when a terminal window is opened. Note that this does not happen in fluxbox/openbox, my other wm. Its hard to explain, so please see the screenshots: [URL] Note the black bar, or just dead at space the bottom of the the terminal windows. In the third image, the prompt is at the "bottom" of the window, or what should be. Again, this only happens in scrotwm and xmondad, no other wm's I've tested.
I just went out and bought a 19" flat screen LCD monitor. Plugged it in and it is not working correctly. When I start the computer the bios info will show up on the screen, then it goes to the screen that let's you choose an O/S if you were to dual boot. After clicking "enter" it will show the first line of the boot then it goes off into horizontal colors then goes black. I have search many different posts and googled but nothing is giving me a hint at this.I changed the xorg.conf to match the refresh rates to match the monitor but that did not work, and did not really think it would considering the point this monitor goes out on me. running: 2.6.27.7-smp 01:00.0 VGA compatible controller:
Silicon Integrated Systems [SiS] 315PRO PCI/AGP VGA Display Adapter
I have followed to the letter the wiki HowTo on setting up VNC and it works (sort of). I get a VNC session (doesn't matter whether I connect locally, over ssh, or using a vnc client), but all I get is the dreaded black screen with an xterm top left. If I then execute 'startkde' from within the xterm I get my normal desktop up. What I am however getting, is a new desktop session. And this happens each time I start a vnc session. I.e. I end up with a LOT of user sessions for my username. (As shown up by a 'users' cmd.) Consequently, each new time I start a vnc session, I get <x> (representing the previous nr of vnc logins) number of xterm windows + 1 appearing. I never get the logged on session.
However I've also noticed my .xsession-errors file filling up. I've googled around enough to get the impression that the reason I'm not getting the logged-on session up in vnc is due to a missing window manager. but haven't hit on the right google combo to fix the issue. I can believe there being a missing window manager due the following related story;About a year ago, I went to switch from KDE to Gnome. Decided I didn't want to and then set out to switch back to KDE. Each time I installed/uninstalled via the GUI "Add/Remove Software". Eventually I got back to KDE and it appeared to work since, so I left well enough alone.t is only now attempting to set up VNC, I have come across all these issues. I firmly believe VNC will work as expected if I can resove the apparent missing window manage issue.xstartup
#!/bin/sh # Ensures an xterm is always available ( while true ; do xterm ; done ) &
So my problem is I recently upgraded my Graphics driver and shut down to log in to windows (yes i dual boot) About 10-15 min later i went to log ubuntu the splash/loading screen what ever you call it worked normally but on reaching the point where one would login I was presented with a Blank screen. Ctrl-alt-f1 also presents me with a blank screen.
I've been using Ubuntu 10.10 for a while it is so great But for the first time, I've booted my laptop on battery power instead of AC power. I have a black screen on the gnome login and i can hear the ubuntu sound. If i press CTRL+ALT+F2 the screen switch from black to the login (terminal version). The problem only appear when i boot from battery power...if i boot from AC power everything is fine !!! I can see the gnome login page. in fact i've reinstalled ubuntu same problem. I think it's a bug with the release. My laptop is a HP TX2000.
Ubuntu 9.10, x64. Around 30-40%of the time, after i login, I just get a totally black screen. If i leave it for a few minutes, nothing seems to happen. Whether or not i get login seems fairly random, and I don't notice if there is any common factor- This is always from a clean boot, and i could be on power, or not on power.This is on a HP 6730b, so the video should be a Intel GMA 4500.
I tried to install Ubuntu 9.10 on one of them by default installation. For the moment there is only one user declared. The installation seems OK, except that Ubuntu didn't find my PPPoE connexion. When I logged in, I got a blank screen with the mouse cursor (it moved, but when I left or right-clicked nothing happened) and on the left something looking like two 1-pixel wide menus, as if the system had understood there were a dual screen. These menus could roll and unroll, and I think I even once managed to shutdown by going to the last invisible item thanks to the keyboard arrows (I'm not sure, because I had also clicked on ctrl+alt+suppr, so it could be a delayed effect of that).
I restarted the computer several times, to get no more than that. When I'm in Gnome safe, everything is OK but I don't have any root privilege there (I guess it's normal): for instance, I can't set up the internet connexion. My 20" 4/3 Philips screen is recognized. Then I changed the screen frequency: it's still OK for Gnome safe session, but now, in the Gnome normal session, instead of a black screen with 1-pixel wide menu, I get a black background picture with white light coming from above and reflecting to an otherwise invisible floor. The mouse cursor is moving, but this is the only thing which works.
I just Installed Ubuntu on my PC (win XP-pro) using wubi, by downloading the .iso from webpage and burned it to cd. The installation went fine, but when I login the screen goes black. I can still see my mouse pointer and one vertical pixel line of the desktop. Could it be the graphics drivers, if so how can I update/change them, via rebooting in safe mode and using command line?
I get a black screen (with tiny bits of white on opposite corners of the screen) every time after logging into Kubuntu Lucid AMD64. The only thing I can do is move my mouse pointer over that black screen which doesn't go away. I booted into recovery mode and with command prompt typed "startx" to start graphical mode. That resulted in the same black screen. Then I decided to reboot and install Fluxbox via the command prompt under recovery mode. Now, I'm able to view graphically under Fluxbox after selecting it over the default KDE and logging in. But how do I get regular KDE/Kubuntu to work again? I don't know what happened to make it stop working!
I just used a LiveCD to install Ubuntu 11.04 x64 on my HP desktop. I'm not sure what you need to troubleshoot. It has the following specs:
HP Pavilion Media Center m8539f PC AMD Phenom X4 9550 QC Processor 5gb ram, 750 gb hdd Came with vista home prem, nothing left of that except the old restore partition, which I have left intact. It had Windows XP installed recently, but that's completely erased. GeForce 9300GE Video Card
Anyway, I want the x64 so that I can have access to my RAM, among other things.
After installation with the LiveCD, it will come on, present me with generic/safe/etc boot options, and then when either safe or generic is chosen, it goes to an (active?) cursor for a few seconds before revving the HD, screen going black, and then... nothing. No indication it is even still powered at all except the light on front.
I installed some weeks ago Fedora 14 via burnt iso file downloaded from official Fedora site. It was working perfectly like a charm for me until yesterday when I tried to install zend server for PHP.During my first try of installation of zend server it corrupted out my apache server and I lost apache on http://localhost.I removed all "zend-server" like stuff from "Add Remove Software" screen.
Installed again apache 2 in the form of LAMP (Linux Apache Mysql Php)via terminal. Apache installed correctly and started workeing again ok on localhost.n again I tried to install zend server from install.sh file in downloaded zend server installation. It showed me after a while like "zend server installed successfully".I shut down my pc thinking everything is ok now.
Today when I started my system, it shows me boot screen of Fedora, I select fedora and then it shows me baloon filling up for around 5-7 secs. Then all of a sudden a black screen appears up with a cursor blinking at its top left and then nothing else happens further. I cannot find login screen to my desktop anymore.I remember one thing thating reinstallation of apache from terminal, I set following command like "chkconfig --level 235 httpd" (I guess that's what I have written as per some online tutorial for LAMP). Is that cause of mine problem ot its something else?
I'm having a rather peculiar problem booting into openSUSE 11.2. After the installation (which goes fine), i get a black screen and my system freezes.
In detail, I can see the splash screen and booting details, but at the moment I am supposed to see a login manager, i just get a black screen. Sometimes it has a cursor indicator in the top left, sometimes it doesn't. Same thing happens in failsafe mode too.
This happens over and over, no matter which installation type I choose, 32bit or 64bit, KDE/Gnome/XFCE.
My problematic box is: AMD Athlon 3200+ 64bit 2GB DDR ATI Radeon x1950pro <-- which I believe might be causing all these issues.
After applying an update about two or three days ago, I restarted my system and now I'm getting a black screen at login. I can hear the brief drum sound clip that plays when the login dialog box pops up, but the screen is completely black and I can't see anything. I'm still able to access low graphics mode via the fail-safe option in the recovery mode menu. So far I've tried the following commands in the terminal:
1st Problem:The problem that I am having is for Ubuntu 10.10. When logging in for some reason it will:1. Login and play the Ubuntu login sound.2. Will start loading the desktop and panels.Right after #2 it goes black and kicks back to the login screen. I am not sure what to do since it constantly does this. It renders the computer useless if I cannot get passed the login page. Yes the username and password are correct.2nd Problem:Before this 1st problem occurred this has also been a problem that has not went away.When I used to be able to login to the desktop I have just the panel on the top of the screen with the traditional Ubuntu "start menu", "system", etc. For some reason the right side which is the other half of the panel will not load. The only solution which fixes it while I am on the current session is to right click the panel and click Minimize/Expand button which toggles to center the panel on the top of the screen. Now when I click Expand its like the problem never happend, but this only fixes it for that session.
