I'm using ATI Radeon 4850 graphic card but cannot bring out its full configuration (one of them, I try to enable s-video out) without installing its native Catalyst driver, which is ver 10.4. Is this version compatible with Slackware 13.0 64?
View 2 Replies
I've been having issues with 3D using the ATI catalyst driver since I started using Slackware (since version 12.2). I've had a few different graphics problems and through trial and error I've discovered they all start with install the proprietary ATI driver. I installed the Gnome Slackbuild to try it out, and managed to get 3D (ie. compiz) working flawlessly there, but for some reason I cannot get KDE visual effects to do anything while using this driver (although they work fine with the open source radeonhd driver). Any thoughts as to why KDE and the ATI driver are being un-cooperative with each other?
Secondly, I created a initrd and changed to use the generic kernel instead of the huge kernel. It doesn't appear the the ATI driver loads properly with the generic kernel as the 3D doesn't work at all and the output of fglrx gives lots of weird error messages about how the driver hasn't loaded properly (or at all)? So where would I go to make sure the fglrx module is loaded by the kernel?
I've downloaded and tried to install the newest ATI driver, but I get this error when I try to build packages:
Code:
./packages/Slackware/ati-packager.sh: line 56: unexpected EOF while looking for matching `]'
./packages/Slackware/ati-packager.sh: line 406: syntax error: unexpected end of file
I extracted the package and am pretty sure I found the source of the error (a missing ]) but I'm unsure of how to repackage the installer after correcting it. I did a google search and at least one other person has had this error: [URL]...
SOLVED: Changed the underscan settings in the Catalyst Control Center. I just installed the ATI catalyst driver 10.7, now there is a black border about 1" on all 4 sides that does not want to go away. Below is my xorg.conf
Code:
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
[Code]...
I have Slackware 13.0 installed with the newest stable kernel (2.6.32.3) on an hp notebook with ati hd3200 igp. What happens is that when I try to buildpkg the catalyst drivers, it fails on the new kernel but not on the original one. I've been searching for a solution for a few days now. found a few that involved patching some files, but none seem to work or I can't make them work. I could probably use the binary installer but I would prefer not to.
Here's the output:
Code:
sh ./ati-driver-installer-9-11-x86.x86_64.run --buildpkg Slackware/Only_Module
Created directory fglrx-install.hokais
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.672......
ATI Technologies Linux Driver Installer/Packager
Generating package: Slackware/Only_Module .....
I downloaded Catalyst 9.3 and tried to install, but it doesn't want to install, sorry, but i can't paste you error message, because my laptop is far away from me now. I can do it tomorrow. May be it is just impossible to install ATI Catalyst 9,3 on lenny and i should try a lower version of Debian? Could u suggest me what to do? I searched over the net for a long period of time, but found nothing relevant to my problem.
View 2 Replies View RelatedStep 1: Open TerminalStep 2: Run as root in Terminal
Code:
su -
And enter the root's password.
[code]....
I've been trying to install the ATI Catalyst_11.1 proprietary driver for the past two days unsuccessfully.I've been using the instructions in this pdf from AMD's website, but it really hasn't done me any good. Despite the fact that the installation wizard says the install completed, nothing changes once I reboot.I read somewhere that it was possible to install it via the "Hardware Drivers" utility. Is that true? If so, how can I go about doing that.At the moment I've got the "ATI fire gl" driver activated, but playing videos in fullscreen is painfully slow and I'm hoping AMD's proprietary driver can help.btw, My system can run pretty much any video (HD or not) in fullscreen under Windows 7. I want the same to be true under Ubuntu.System Specs:
Model: Acer Aspire T160
CPU: AMD Athlon 64 3800+ (Socket 939)
Mobo: FC51GM (Foxconn WinFast 6100K8MA-RS)
[code].....
I'm "happy" owner of ATI x1250 video-card. Used manual from [URL] to install Catalyst 9.3 in lenny, but I have 64bit system,so have lot's of errors. kernel & xorg info:
[code]....
For kernel versions past the released 2.6.25, the git series. They�ve removed the tlb stuff from smp_[32|64].c and added new files specially for tlb: tlb_32.c and tlb_64.c.i'm using not proper patch, or something else, but i can't patch my kernel. I saved this text into fglrx.patch
[code]....
console asks me to provide "File to patch" because there is no such file as /arch/x86/kernel/tlb_64.c i created manually just an empty doc tlb_64.c and then launched patch but it shows:
[code]....
AFAICT, F14 does not have any formal support right now (no rpms, etc), and there are some pitfalls to using the ATI installer which I am sure have resulted in system re-installs, unhappy faces, and people stuck without a proper driver. This is because while the installer seems easy to use, it's unfriendly in so far as it does not check for pre-requisite software first, and when it craps outs, it doesn't tell you anything is wrong, but it will leave your system without a functioning X server. The first time I ran it, the GUI installer told me everything was complete and that all I needed to do was reboot! When I did, X would not work, and reinstalling the original xorg-ati driver, etc, did not fix it.....
View 3 Replies View RelatedHave a fresh install of FC14, 2.6.35.11-83.fc14.i686.PAE. After trying the Catalyst install instruction the response is this - Requires: kernel-uname-r = 2.6.35.12-88.fc14.i686.PAEInstalled: kernel-PAE-2.6.35.11-83.fc14.i686 (@updates)I do 'yum update kernel' and I appear to have the latest release.
-------------------
[root@localhost ~]# yum update kernel
Loaded plugins: langpacks, presto, refresh-packagekit
[code]....
I've download the catalyst center for the 4870x2 from the ati site but how can I install it now?
View 9 Replies View RelatedI dual boot on separate HHDs. I have just done a fresh install with updates. I installed the restricted driver from the repositories, and I get an error message from ati catalyst (administration). Also I have "unsupported hardware" at the bottom of the screen.
Graphics card is a XFX ATI HD 5770 on this system, and I just sold 2 8800 GT's yesterday, and bought two more XFX HD 5770's for CF in my other system.
I didn't do a bad thing, 'cause I was really groovin' on Ubuntu, that I just installed at the beginning of the week.
I have already downloaded and installed ati's catalyst for my ati mobility radeon 4570 (at least i think so, since there is the ATI catalyst control center in the system-> preferences menu). The problem is that i want to upgrade its version from 10.9 to 10.10. and since i want to firstly uninstall the previous version,I get this:
Code:
alexandros@alexandros-laptop:/usr/share/ati$ sh ./fglrx-uninstall.sh
sh: Can't open ./fglrx-uninstall.sh
The uninstall.sh doesn't exist.
UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================
[code]....
I am running a fresh installation of Fedora 13 on a 64 bit machine. I have an ATI Radeon HD5750 video card, and I want to install drivers for it. I have tried following Leigh's guide, but I have run into a problem. I cannot install kmod-catalyst because of the following error:
Code:
[root@localhost ~]# yum install kmod-catalyst
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
--> Running transaction check
[Code]...
I just upgraded to 11.4 from 11.3 and cannot seem to get the FGLRX modules to load. Every I try to load the module, I get the following error: fglrx: no symbol version for module_layoutI read through this howto with no avail: SDB:ATI drivers - openSUSE else run into this problem with upgrading?
View 2 Replies View Relatedim running ubuntu 11.4 im trying to install amd catalyst 11.4 for my x1300 ati graphic card but when i installed it my system couldn't start and i had to start in recovery mode for removing tha package. i think i have done something wrong with the packages how to install ati catalyst 11.4 on my x1300 graphic card
View 1 Replies View RelatedI'm running Debian Squeeze/current fine with the default kernel & ATi's Catalyset drivers. I'm struggling to get the display drivers to work with the bigmem kernel as I've got 4GB ram on my machine so might as well try to enable it.
I can have my system work with the normal Squeeze kernel by installing the normal kernel headers & then FGLRX drivers, but after additionally installing the bigmem kernel & headers (linux-image-2.6-686-bigmem & linux-headers-2.6-686-bigmem) I cannot get the system to reach X after removing & then re-installing the video drivers.
I tried to install the ATI proprietary driver for an HD 5800 (Catalyst for Linux 64 bit, v. 10.8). The two main instruction sites are:
SDB:Configuring graphics cards - openSUSE
SDB:ATI drivers - openSUSE
I chose the hard way method. I downloaded the driver. Restarted SuSE 11.3 in mode 3. And as SU followed the method above, including adding the zypper programmes (which found some already installed and which installed a whole lot more). When I then attempted to run the install (sh ./atidriver-install-10.8-x86.x86_64.run) and selected automatic mode. It completed 82% and stalled attempting to install "Postprocessing Kernel Module".
I pressed control c to kill the process and attempted to re-install using the manual mode and then using the build mode. In both instances, same outcome. When I rebooted, and entered my password, the desktop did not load but sent me back to the username/password page. I can't get back in. Does not matter as I have backed up my docs.
I decided to install the proprietary driver because the colours on the desktop corrupt after the 2nd boot following a clean install. i.e. on the initial boot the colours are fine. Second, this is the 3rd effort I have made to install the driver after a clean install of SuSE 11.3 and there is no change in outcome. So, my question: anyone any suggestion what is going on and how I can install the driver successfully? Or, do I not understand the new regime in SuSE 11.3 and should I not attempt to install a new driver.
I just installed the ATI Catalyst drivers for my Radeon HD3200, and upon reboot my mouse has disappeared. I can still use it, it's just that there's no pointer on the screen. In addition, moving windows and loading/scrolling any window is very, very slow.I also noticed there's no entry for the mouse in xorg.confI have run aticonfig --intial and aticonfig --initial -f, to no avail.
View 9 Replies View RelatedHas anyone been able to get latest catalyst drivers (10.3 or 10.5) working on kernel 2.6.34?
View 7 Replies View RelatedI think i found out what was crashing my computer my Graphic card every time i start a game the computer goes down. I have a Ati Radeon 5570. Desktop Effects: Disabled System Info: 2d: fglrx 3d: ati I downloaded the Ati Drivers from the website after installing the Open Source not sure if that is causing a problem. Here are the steps i took. su - UNSUPPORTED="yes" sh ./ati-driver-installer-11-2-x86.x86_64.run --buildpkg SuSE/SUSE-autodetection zypper in fglrx* aticonfig --initial reboot It will crash whenever i start a game and randomly when i run ..... VLC etc.. Edit: Should i uninstall all opensource/ati and start over and if thats the case whats the best approach to this?
View 5 Replies View RelatedAfter installing Catalyst with VA-API began a strange problem with the sound via HDMI. Prior to installing the sound worked fine. Platform: MSI E350IA-E45 with Radeon HD 6310 and AMD Zacate E350 Version of Catalyst 11.4. After installing the sound is playing with a terrible noise Sample: [URL]... I already tried all the audio outputs, but this does not solve the problem. The problem occurs only when the transmission of sound through HDMI.
View 1 Replies View RelatedI have a laptop with ATI mobility 2400, and ralink wireless, I have not very experience with linux, I have tried many live-cds, ubuntu, opensuse, gentoo, fedora and all crash if I don't boot with the aditional option "clocksource=jiffies", i'm thinking of trying fedora 11 x64 but my main concern is about my ATI mobility VGA, in windows i need to install modded driver as original catalyst are not compatible with my system.
View 3 Replies View RelatedI realize that Canonical is not responsible for the Catalyst driver, but I can't seem to operate outside of the Ubuntu Classic (no effects) mode for 64 bit Natty, and I was curius if anyone else had encountered or resolved this.
When I upgraded from 10.10 (I was using the fglrx package), xorg would immediately crash. I was able to reach the gdm screen only using recovery mode. I uninstalled the fglrx package, and now I can boot into Ubuntu Classic (no effects) mode only (no other desktop will work) using the open-source driver at no greater than 1280x1024.
When I try to re-install the catalyst driver using aptitude or Administration->Additional Drivers, the installation fails:
(jockey.log: WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx)
Similarly, package generation from the AMD page fails:
Installation complete.
*** glibc detected *** ./setup.data/bin/x86_64/setup: double free or corruption (fasttop): 0x000000000259f630 ***
======= Backtrace: =========
[Code].....
I just installed Ubuntu amd64 10.04 on my Gateway LT3114u Netbook. The video card on this device is ATI Radeon� X1270. For some reason the automatic driver installed by Ubuntu is not working perfectly, I noticed that because: When the "Appearance Preferences" - "Visual Effects" are set to "Normal" or "Extra", some very weird lines and images apear, and I can�t read any word as the characters are messy. But if this setting is "None", the system works just fine!
Also, I tried to install the ATI driver and the "ATI Catalyst Control Center" and when I try to run it, it says the ATI driver is not working ok. Any tips on how to solve it? Please consider Im a begginer for Ubuntu.
I recently installed Slackware Linux 13.1 , and my Wireless is down. I've only installed 3 Linux disto's on my main laptop (Ubuntu 9.10 , 10.04 , and Crunchbang Linux 9.04 , just had Crunchbang), and they all had the same problem. In all three , I was able to enable Windows Wireless drivers and every thing worked. Now , I'm assuming I have to the same ting in Slackware? Sorry , but I have no idea what my wireless card is. But I know that my laptop is a Dell Insprion E1705. One last thing , I did ifconfig and that wlan0 is my Wi-Fi interface. I typed ifconfig wlan0 up to see if that was the problem. After I did that , I got and error message. Then I typed ifconfig wlan0 down to see if it was down and it made wlan0 down. I tried bringing it up again , but I got an error saying it couldn't find the device specified. Also , how do I install XFCE? I really don't like KDE for some reason and would like to install XFCE. I chose XFCE over GNOME (my favorite) because I want to try something new.
View 4 Replies View RelatedI created this small how to install the binary Blender 2.49b on Slackware 13.1 86_x64 Multilib.
http://wiki.blender.org/index.php/Do..._Blender/Linux
I'm trying to install Puppy 525 on my Slackware 13.37 PC as a dual-boot using LILO. Puppy is living, all on it's own, in sda6, a 6 GiB partition. It got there by using the Puppy Universal Installer and selecting a 'Full' install, not a 'Frugal' install. I cannot find 'LILO' type instructions, only 'GRUB' type instructions.
Has anyone succeeded in doing a hard drive install of Puppy with the LILO boot loader?
Edit: I'll probably regret it, but I used Puppy's GRUB installer.
