Slackware :: 13 - When Plugin Usb Device In The Usb Port It Print Error

Jan 21, 2010

After new installation of slackware 13 when I plugin usb device in the usb port it's print error:

And I have not premission on the device and I must mount the device handle. I

View 10 Replies


ADVERTISEMENT

Fedora Networking :: 3G USB Modem Has Wrong Device Port In NM - Change Device Port In Network Manager?

Aug 14, 2009

I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?

View 1 Replies View Related

Slackware :: Unable To Enumerate USB Device On Port 5

Jul 16, 2011

I'm running Slackware 13.37 64 bit. I run it on an HP2945SE AMD Turion x2. I am getting an error during boot up unable to enumerate USB device on port 5. It filters throughout the rest of the boot up commands / results. It doesn't seem to matter if things are plugged up to the USB ports or not. Also it doesn't seem to affect anything on the computer. Its just irritating.

View 2 Replies View Related

Slackware :: Error - Could Not Load Project Management Plugin KDevQMakeManager

Feb 7, 2010

When trying to load Qmake project in kdevelop it fails and write: "Could not load project management plugin KDevQMakeManager" and then:

"project importing plugin (KDevQMakeManager) does not support the IProjectFileManager interface."

View 5 Replies View Related

Slackware :: CUPS Print Jobs Print 1st Page OK, But All Others Are Overwritten?

Feb 26, 2011

Not sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.

View 14 Replies View Related

Slackware :: Error Initializing -vo Device In Mplayer

Jul 12, 2010

I have installed slackware 13.1 on my friends laptop. Its an msi laptop . dual core 2ghz, 1gb ram nividia 9000 series.etc. everything is fine but after installing mplayer codecs from slackbuild and also xvidcore, i am not able to play avi files in mplayer. It is giving me a fatal error saying. error initializing -vo device. i tried to change the video driver. it was by default xv then i tried X11(xvid) then open gl and open gl with max textures . when i made it to open gl with max textures the video out came but it is lagging with the audio.

View 2 Replies View Related

Slackware :: USB Hub Device Not Accepting New Address (Error -71)

Nov 1, 2010

Slackware 10.2. My usb ports work fine when used directly. When I insert a USB hub to duplicate a port I get the message USB device not accepting new address=2 error=-71

View 1 Replies View Related

Ubuntu :: Plugin Error: Unable To Activate Plugin Cover Art

Jan 17, 2011

While using Rhythmbox this morning, I was greeted by a blunt and undiscriptive error message:

Code:

Plugin Error:Unable to activate plugin Cover Art.Going to the plugin page, I was supprised to find that most of the installed plugins would not load. Without any info being offered in the player, I looked on line. Many people had problems with other plugins, and most of the time it was a problem with an uninstalled python package. But I checked on this site and I found that I had all of these packages installed. (Well, the python ones at least, to check all of them would take forever.)

Code:

[URL]

After finding no help there, I ran rhythmbox -d to debug:

Code:

(12:04:33) [0x934fe68] [rb_python_module_init] rb-python-module.c:406: Init of python module
(rhythmbox:4971): Rhythmbox-WARNING **: unable to load module as python runtime could not be initialized

[code]....

View 1 Replies View Related

Slackware :: Error - Libusb Couldn't Open USB Device /dev/bus/usb/001/001: Permission Denied

Mar 24, 2011

Hello,

this error spams about 100 times, then the scanner does indeed work. So I'm not completely broken, but the error messages are of concern, and it slows down the process of scanning for the time it takes to do the messages.

Error in console:

libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes.

my sript runs:

scanimage
--device $MODEL
--resolution=$RESOLUTION
-x 5104 -y 6840

my groups:

uid=1000(fogie) gid=100(users) groups=100(users),7(lp),11(floppy),12(mail),15(man),17(audio),18(video),19(cdrom),20(games),21(sloca te),83(plugdev),84(power),86(netdev),93(scanner)

Even a simple:

scanimage -Lv

in console gives this on a separate --current pc as well.

View 2 Replies View Related

General :: Cannot Print From Flash-player Plugin

Feb 18, 2010

I am running flash-player plug-in 10.0.32.10 inside of Firefox on a SLED 11 machine.Firefox can print to the network printer without issue from File > Print.However, I cannot get the flash-player plugin to print at all. The print dialog comes up, asks for which printer, and which pages.I click Print and it was as if I had pressed cancel.

View 2 Replies View Related

Slackware :: Installing Java Error - When Trying To Run A Java App With The Firefox Plugin - Browser Crashe

May 29, 2011

Code: ~ $ /usr/java/jre1.6.0_25/bin/java -showversion Error occurred during initialization of VMjava/lang/NoClassDefFoundError: java/lang/Object

That's the error I get. When trying to run a java app with the firefox plugin, the browser simply crashes if it's the 64bit java or tells me it's not installed if it's the 32bit version.

I'm at a loss as to what to do. I think it has something to do with leftover gunk from a previous version I misinstalled(Is that even a word?) Anyway, the only thing that google could come up with was a solution for windows which laid blame on Bill Gates for having a bunch of pf (java prefetch) files stuffed into c:windows for no apparent reason. The solution was to delete them, but I can't seem to find the java prefetch folder in linux. The method I used is downloading the rpm from java.com the rpm2tgz then installpkg then cp libnpjp2.so to firefox plugins folder.

View 8 Replies View Related

Slackware :: Compiling Large Slackbuilds - Error-message - Not Enough Space Left On Device

Aug 20, 2010

I am currently running slackware 12.2 on a 25 GB partition. I like to use slackbuilds, but when I try to compile larger tarballs (like abiword, or a patched version of Ghostscript as I did today) I receive an error-message: 'Not enough space left on device'. I think the size of the partition must be big enough (I never got this message when compiling with Linux From Scratch). I think it has something to do with the size of my /tmp directory, but I don't know how to fix this. Is there a way to solve the problem, so that I could be able to use slackbuild-scripts?

View 4 Replies View Related

SUSE :: Printer Does Not Print Using USB Port

Aug 11, 2009

my epson printer on my system consists of: ASUS A8N32-SLI DELUXE. THE printer CX8400 using usb port does not print it, only spools out paper with suse 11.1

View 4 Replies View Related

Programming :: PHP To Direct LPT Port Print?

May 31, 2011

Any one using php program to direct lpt port print command, now i am creating one programe for mini shope that system having citizen CT-S4000 model.

View 2 Replies View Related

Slackware :: Missing The Flash Plugin Using Slackware 13 64bit - 2.6.29.6-smp - KDE Desktop

Apr 26, 2010

using Slackware 13 64bit, 2.6.29.6-smp, KDE desktop. i installed the flash-player-plugin using sbopkg. when i try [URL], it says i'm missing the flash plugin. i copied the. so file to

/usr/lib/mozilla/plugins
/usr/lib64/mozilla/plugins

and i still get the same result. what am i doing wrong?

View 11 Replies View Related

Ubuntu Installation :: Software Centre Doesn't Work - Error "sudo Apt-get Install Vlc Vlc-plugin-pulse Mozilla-plugin-vlc"

Jan 31, 2011

I have just installed the newest version of ubuntu (10.10 the maverick meerkat) and im struggling installing any programs, wine and vlc arnt appearing on synaptic package manager and anything i try to do in either the command promt or ubuntu software centre doesnt work either. On the command promt when i follow the commands as seen on various tutourials the command promt comes back with an error. VLC example given below.

[Code]...

View 5 Replies View Related

Slackware :: VirtualBox - Windowsxp Guest - No Sound - Unknown Audio Device - In The Windows Device Manager

Mar 11, 2010

For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?

View 13 Replies View Related

Ubuntu Networking :: Error - Remote Port Forwarding Failed For Listen Port 5500

Aug 7, 2010

When I use the following command:

ssh user@ssh_server -L 5500:localhost:5500 -p 22

everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:

ssh user@ssh_server -R 5500:localhost:5500 -p 22

I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...

View 2 Replies View Related

Slackware :: Error. "the Audio Playback Device HDA Intel (ALC887 Analog) Does Not Work"

Nov 8, 2010

I am unable to get any audio to play. I configured alsa and checked to make sure nothing was muted. I think the problem might be KDE related but I'm not sure. Also when I restart the computer I get this error. "the audio playback device HDA intel (ALC887 Analog) does not work".

View 14 Replies View Related

Fedora :: Setting Default Sound Device For Firefox / Flash Plugin

Oct 20, 2009

Using an external SoundBlaster USB... set as default in Fedora 11's new sound device manager ( neat btw )...works great... except no sound in Firefox / Flash Player.

View 3 Replies View Related

Server :: Lifekeeper Error - DEVICE FAILURE On SCSI Device - /dev/add

Sep 17, 2009

Since May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.

View 3 Replies View Related

Slackware :: Failed To Initialize NVIDIA Graphics Device On Startx With Slackware 13.1

Aug 24, 2010

I installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.

View 14 Replies View Related

Ubuntu :: Deskjet 940c Wouldn't Print - Errors With Communication And The Initial Device?

Apr 19, 2011

[i use Ubuntu linux 10.04 LTS - the Lucid Lynx] i tried to print a document and i got the following message from the "document print status (my jobs)": "There was a problem processing document 'take it easy' (job 400)" i tried to print other things but i got the same error. after any print request i sent the printer asked me to release the paper it took, and when i release it, it printed this:"Unable to open the initial device, quitting." i have "HP Device Manager" installed on my computer, and lately i tried to install a wireless printer (officejet 4500 g510n-z) through it, and it failed because the connection between the printer and my computer disconnected before the terminal finished the installation. i didn't try to print with the deskjet right after it but now when i try- it doesn't work, so it might have something to do with my current problem... also when i looked at the HP Device Manager i saw the deskjet printer icon marked with X so i used this program's option "Setup Device" and the X mark disappeared.. and it still doesn't work.

View 2 Replies View Related

General :: Use A Rs232 Device That Uses The Usb Port?

May 18, 2010

been trying to use a rs232 device that uses the usb port. it calls for a virtual com port to be created. i am running on ubuntu 10 and get hella confused with the search results i have come across.some call for the usbdevfs which apparently doesn't exist under lucid. another had me do use some "magic" in getting it to work.they provided a script mountusbfs.sh

Code:

#
# Magic to make /proc/bus/usb work
#
mkdir -p /dev/bus/usb/.usbfs

[code]....

of course when i tried it the domount command doesn't exist so i modified the above script replacing the domount with mount and it seemed to do something things. usbview is specified as the determining factor whether or not you have the usbfs mounted properly. it wants to use proc bus and ubuntu doesn't use that anymore apparenlty. i have read that i need to enable a usbmon (flag?option?) in the kernel to be set. which it isn't when i followed the steps to check.

View 3 Replies View Related

Fedora :: Unable To Enumerate USB Device On Port 2

Jun 29, 2011

i have this error in my log but i don't know why?

Quote:

Jun 19 20:34:08 localhost kernel: [352155.875643] hub 2-1:1.0: unable to enumerate USB device on port 2
Jun 19 20:34:08 localhost kernel: [352155.851515] usb 2-1.2: new low speed USB device using ehci_hcd and address 17
Jun 19 20:34:08 localhost kernel: [352155.677964] usb 2-1.2: device descriptor read/64, error -32
Jun 19 20:34:08 localhost kernel: [352155.503404] usb 2-1.2: device descriptor read/64, error -32

[code]....

The Motherboard is a Intel Desktop Board DH55TC, Sockel 1156, mATX, HDMI

View 14 Replies View Related

Fedora :: Unable To Enumerate USB Device On Port 4

Jul 21, 2011

After installation I boot a few times and used F15 on my Dell Inspiron 1564. But now I can't boot anymore. The screen just shows "unable to enumerate USB device on Port 4" and just hangs there with a blinking cursor below that line. I have no USB devices attached though.

View 2 Replies View Related

Hardware :: Using Printer Port - No Such Device Or Address

Mar 14, 2010

I am trying to use the printer port. But, I get this

Code:
Broadcom EJTAG Debrick Utility v1.6r-hugebird
Failed to lock /dev/parport0: No such device or address
johnh@tux:~/Ubuntu One/hh$
run from johnh I permission denied sudo-ing I get above.

View 6 Replies View Related

General :: Detection Of A Device When Plugged Through USB Port?

Apr 14, 2010

tell me detection code of device when an external device is connected through USB port.

View 4 Replies View Related

Ubuntu :: Unable To Enumerate USB Device On Port 4

Mar 4, 2010

Doing a dmesg I can see following lines

[ 130.876406] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 130.876453] usb 3-2: USB disconnect, address 6
[ 131.200399] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 131.396382] hub 1-0:1.0: unable to enumerate USB device on port 4

[code]....

That is what I have exactly pluged, the webcam on the top of my screen and an external mouse. Btw, I can plug USB devices with no problem, so I am skiping this error since long time ago, but I don't understand this message and I would love to do it.

View 5 Replies View Related

Ubuntu Installation :: Hub 5-0:1.0: Unable To Enumerate USB Device On Port 1

Jan 17, 2010

I installed Ubuntu 9.10 to my USB-HDD. After upadte, ubuntu can`t load with error:

usb 5-1: device description read/64: error -32
usb 5-1: device description read/8: error -71
hub 5-0:1.0: unable to enumerate USB device on port 1

The boot stopped after this strings.I reinstall the system, and I have this problem again.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved