I am running or was running a mail server. It used the titles service to scan emails but keeps bringing up a temporary failure right. But when I run the command 'amavisd' It brings up this error here:
[Code]...
I configured POSTFIX with DOVECOT, LDAP & Squirrel mail on RHEL 5.5. Iam able to login using LDAP authentication. Now i want to deliver mails locally using LDAP. I configured to query LDAP using transport lookup table (ie.transport_maps=ldap:ldaptransport). it shows the following errors:
warning:dict_ldap_lookup:ldaptransport : search base not found-no such object..
Temporary lookup failure.
ldaptransport Configuration:
server_host=hostname of server
[code]....
(But same search_base is configure in Dovecot, it is authenticating) I have searched in net, they are telling that some ASCII encoding problem in postfix to LDAP.
host postfix/qmgr[13020]: warning: connect to transport amavisd-new: No such file or directory
How can I fix this error? I have searched the inet but can't seem to find a solution.
i just installed qmt.iso from site qmailtoaster.i can create domain on admin-toaster and add new account at domain.i have problem when i'm testing send email,there warning :"451 DNS temporary failure (#4.5.1 - chkuser)".
View 1 Replies View RelatedAm unable to send mail from Outlook to my Postfix SMTP server.
Am getting the following in the /var/log/maillog.
Code:
Think I've pretty much followed the instructions correctly here.
[url]
Also, I looked for the PID of the smtpd and did a strace on it.
Code:
Code:
However, when I looked at the permission of this file, it should be accessible by everyone.
Code:
i have downloaded the pidgin.repo file from the web and copied in /etc/yum.repos.d. and i simply start the yum-updatesd service. When i fire the command yum install pidgin, it gives some name resolution problem. i am accessing net through proxy server.RHEL 5 is my distro. This is what the error msg i am getting.
[Code]....
I setup Postfix on my Ubuntu 10.04 LTS server but I am getting an error saying: Code: Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 530 530 SMTP authentication is required. (state 14).
[Code]....
installing subversion on CentOS 5.5 using following command: [root@lucifer ~]# yum install mod_dav_svn subversion does dont connect to a mirror with following error, "Temporary failure in name resolution"
View 1 Replies View Relatedwhen i am using traceroute command, it is giving the erro as follow: traceroute [URL]: Temporary failure in name resolution Cannot handle "host" cmdline arg [URL] on position 1 (argc 1)
View 2 Replies View RelatedI work for a university institute and administrate its servers "incidently". Currently I am putting some work into our mail server configuration (sendmail 8.13.1 with amavisd-new-2.6.4). Recently I got amavis to verify DKIM signed mails. Now my plan was to sign outgoing Emails ourselves. This is what I have done (I replaced some names for privacy reasons):
I created a private key:
Code:
/usr/local/amavisd/amavisd genrsa /var/dkim/SEL1_DKIMkey.pem
Changed permissions for the user running amavis:
Code:
chown -R vscan.vscan /var/dkim/ && chmod -R 700 /var/dkim
Editet my /etc/amavisd.conf:
[Code]....
Send Testmails to sa-test@sendmail.net and check-auth@verifier.port25.com . They automatically create answer mails considering signature information.
Send emails to my external account at some other provider.
The problem is that amavis is not signing the mails. Both automatic test emails reported, that the mail had not been signed. The mail to my external account also did not contain any DKIM information.
"My" system:
Code:
# uname -r & cat /etc/issue
2.6.9-89.0.11.ELsmp
Red Hat Enterprise Linux AS release 4 (Nahant Update 8)
I have postfix setup with amavisd and I tried to send myself an email with the eicar file however it lets the email go through to my inbox. When I restart the amavisd service, there are no errors in the log and it finds all the decoders for different file types and I also see this come up:
Feb 8 14:45:44 Mailgate amavis[3116]: Using primary internal av scanner code for ClamAV-clamd
Feb 8 14:45:44 Mailgate amavis[3116]: Found secondary av scanner ClamAV-clamscan at /usr/bin/clamscan
Everything seems to work but it doesn't scan the file for viruses. Also, I've double and triple checked and my amavisd.conf file doesn't have the option enabled to bypass virus scanning.
I followed this how to document [URL] to install postfix, Amavisd, SpamAssassin and ClamAV. My postfix installation is working fine and I can send and receive emails fine. However, it looks like SpamAssassin is not catching any emails. Emails do get passed over to Amavisd as I can see in the logs but ALL Messages comes out CLEAN without being tagged as spam.
As per the document, I did test by sending a test virus email
sendmail -i your-address@example.com < sample-virus-simple.txt.
This is caught and NOT let through so ClamAV is ok but when i send
sendmail -i your-address@example.com < sample-spam-GTUBE-junk.txt
it does get delievered without being detected as SPAM or tagged as SPAM.
As I said, I have followed the documentation dot by dot and hence do not have spamassassin starting up as a service but i guess amavisd starts it within itself as a module.
Also, my postfix version is the one that supports mysql virtual tables which I got from rpmforge.
I just got my electricity bill for July & August and noticed a dramatic increase in my consumption. Basically, the amount of electricity has almost doubled (from 433 to 748kWh) and the increase happens mainly between 5pm and 11pm, as well as during weekends... I did not have to search for too long before I pointed out the issue... My new home server. It is configured to auto WOL at 5PM and auto shutdown (Cron) at 11PM. It also runs 24h/day on weekends...
Here's the server's config:
Hardware:
MSI Platinum K9N mobo
AMD Athlon64 CPU
1GB DDR2 Ram (2X 512MB)
[code]....
Everything else is only "run-on-demand" or scripts... I am searching for suggestions on how to minimize the power requirements. The video card is going to be replaced soon, by a standard PCI 4MB videocard. Next I will get rid of the 80GB & 750GB HDD's to be replaced by a 1.5TB HDD...
I have a client's linux server where someone added a script which sends spam mails from the server's local loopback address (127.0.0.1) all my seniors worked on it and couldn't trace the script on the server this issue was going for a week, now I have an idea to bring down the loopback interface of that particular server(ya, that was not a permanent solution but just had an idea), but my support manager told that it will bring the whole server down(so far as i have learn't loopback address is used only for testing the NIC card's functionality), is that really bring the server down.?. How ever i tried this using a test machine all the connections works fine even after i bring down the loopback interface. As my client's server is a production server i can't test it there without clear knowledge, can any one help me out whether will it bring down the server or will it cause any side effects on it(i know that you guys are experts so i am asking it here)?
View 5 Replies View Relatedstart working with SA+Amavis+clamd+postfix+dovecot.will be my filter:spamassassin+amavisd-new+clamd. 1 Server will be my mail server: postfix+dovecot. Like u see, the emails from the outside reach first the filter, latter the mailbox. Now, I have seen in my log files, that if I receive a email to a "unknown user", the filter doesn't detect this and process the email and send it to the mail server. Exist a way to setup the filter to first check if the user exist and them apply all hard work and latter send the email to the mail server
View 3 Replies View Relatedis there any HOWTO for configuring Webmin Postfix server with multiple postfix virtual hosts? Seems to be a tough challenge to set it up without any easy manual..
View 1 Replies View Relatedso i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
View 7 Replies View RelatedI recently moved over user from an old box running postfix(v 2.0.16) over to rhel 6 running postfix (v mail_version = 2.6.6). ive tried to make sure all the files are of correct permissions and that the main.cf file is configured corectly. However there is something wrong as when i run postfix: service postfix server i get no error but when checking the status:service postfix status i get: master dead but pid file exists Looking into /var/log/mailog i find this line being the issue:
Feb 25 16:24:39 puny1 postfix/master[3517]: fatal: fifo_listen: create fifo public/pickup: Permission denied
I gather this is a file permission issue and ive tried to make sure the public folder in /var/spool/postfix is correctly set but still no avail.
I'm trying to configure postfix on an ubuntu virtual machine to use gmail as a relay client. For the past two days I have been in and out of the logs, changing parameters and blindly following tutorials but I can't get anything to work properly. So far I've narrowed my problems down to tls connection establishing and a failure to authenticate, judging by the local emails I've received from "The mail system".
View 2 Replies View RelatedHere is what i do: make clean make makefiles CCARGS='-DEF_CONFIG_DIR="/opt/product/postfix-2.6.5/etc"
-DEF_COMMAND_DIR="/opt/product/postfix-2.6.5"
-DEF_DAEMON_DIR="/opt/product/postfix-2.6.5/libexec"
-DEF_MAILQ_PATH="/opt/product/postfix-2.6.5/bin/mailq"
-DEF_DATA_DIR="/opt/product/postfix-2.6.5/lib"
-DEF_NEWALIAS_DIR="/opt/product/postfix-2.6.5/bin/newaliases"
[Code]...
make install then i got this error: postfix: fatal: chdir(/usr/libexec/postfix): No such file or directory make: *** [install] Error 1 I don't understand why it's checking the usr/libexec folder for the daemons although I've set the folder to /opt/product/postfix-2.6.5/libexec in the makefile. Here is also the cat of my makedefs.out:
[Code]....
I have builded a svn server using apache before. But recently I can not check out from the svn server,and error code is as follows:
svn: Can't find a temporary directory: Internal error
I have searched in the google,they said no space on the server.But my server have much space.
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 49G 22G 24G 48% /
tmpfs 220M 0 220M 0% /dev/shm
/dev/sdb1 917G 867G 3.8G 100% /mnt/md0
/dev/hda1 151G 129G 15G 91% /mnt/meego
The server is at the /dev/hda1 partition.
I just want to define a few soft whitelist items in 50-user.
Something like this (the example is from 20-debian_defaults):
'noreply@freshmeat.net' => -3.0,
'owner-technews@postel.acm.org' => -3.0,
[code]....
I configured a mail server using Squeeze's latest packages with Posfix + Amavisd-new + Clamav + Spamassassin, but apparently the latter is not using the system configuration files, and I cannot figure out why.Running amavis in debug mode I get the following:
# /etc/init.d/amavis debug
Trying to run amavisd-new in debug mode...
Apr 28 16:01:08.291 [1427]: starting. /usr/sbin/amavisd-new at *******************
[code]....
Is there a package in YUM now that automatically updates amavisd-new to version 2.6.4??? My VM comes stock with version 2.5.4 and i absolutely CANNOT update it to 2.6.4 due to incompatibility issues in Maia Mailguard. When I do the package upgrade I don't understand but i specifically do NOT choose amavisd-new to be updated and everytime I check to see my latest version it is at version 2.6.4 I don't get it am I missing something? What can be causing my package to always get upgraded to the new version when I am not upgrading it.
I have spamassassin 3.3.1
clamav 0.96
postfix 2.3.3
how can I best transfer my mails that are sitting on my old exim server to my new postfix server?
View 1 Replies View RelatedI'm having an issue with Ubuntu 10.04 server, where it is not bringing up a console on the local machine.
The only display on the local screen (and in /var/log/boot.log) is:
Code:
fsck from util-linux-ng 2.17.2
/dev/sda1: clean, 100725/2342912 files, 781590/9357824 blocks
init: ureadahead-other main process (595) terminated with status 4
Hitting <alt>-<f[anything]> just brings up a blank screen with a single flashing cursor, and no login prompt.
The ureadahead message sounds like the classic Windows error: "The operation could not be completed because of the following error: The operation completed successfully." So ureadahead isn't the problem.
Also... ssh works, but other services (apache, mysql, smbd, nfs-kernel-server, etc) need to be started manually.
Instead of using sudo to start the listener, first use su - oracle, then start the listener.
su - oracle
password: oracle
lsnrctl start LISTENER
lsnrctl status
I was then able to bring up the Oracle home page a few minutes later with: [URL]
I'd like to know if it's possible to bring pages from a particular process into main memory, or to set parameters for a given process, or class of process so that it will not be swapped out.
View 1 Replies View RelatedI have an old computer with 128 megs of memory and one hard drive of 120 gigs. I have gone back and forth between installing Ubuntu and Puppy. Right now, despite advice against it because of the limited memory, I am thinking of sticking with Ubuntu. Puppy has some problems but that is not what I want to address right now. What I want to ask about in this discussion thread is how to get Ubuntu onto the Internet.
I think I get it, but I want to be sure. There is a menu option called "Network Connections" and it opens a window that has several tabs. Since I have a wired connection, I click on the "Wired" tab where it shows my connection in a list box. When I click on Edit it opens another window that displays a MAC address and there is an "Apply" button. When I click on this, there is an Authenticate window that opens up and it prompts me for a password. Is this password that it is asking for the same thing as the password that my router uses?
I have recently started using this laptop as a host for tinkering with vmware. I have wicd installed on it, which normally brings up wlan0 and connects to the nearest configured wireless lan automatically.
Vmware has installed another, virtual, NIC on the host, called vmnet8. I configured it in /rc.d/rc.inet1.conf with a static IP.
Now when I boot up the laptop vmnet8 starts up and running and correctly configured, but wlan0 doesn't. I have the wicd icon in my systray but it doesn't find a network, even when i click on it and refresh etc. I have to open a terminal and "ifconfig wlan0 up" in order to get the NIC up. Then wicd works fine.
Networking configuration in Slackware looks like a bit of a nightmare frankly (why i usually use wicd!) so I thought i'd ask you chaps before messing about too much.