Instead of using sudo to start the listener, first use su - oracle, then start the listener.
su - oracle
password: oracle
lsnrctl start LISTENER
lsnrctl status
I was then able to bring up the Oracle home page a few minutes later with: [URL]
I'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies View RelatedI am trying to stream audio from one machine to several others via pulseaudio.
Following a bit of digging, I configured the "sender" with:
load-module module-null-sink sink_name=rtp
load-module module-rtp-send source=rtp.monitor rate=48000 channels=2 format=s16be
..and the "listeners" with: load-module module-rtp-recv
Then, playing on the sender, and using PulseAudio Volume Control /Playback to set "Null Output", my listeners all start working as expected. The outstanding problem is that the sender is silent - nothing from its speakers. Perhaps not surprising after the "Null" setting above.
Is it possible to stream like this and also listen on the sender at the same time -
I'd like to know if it's possible to bring pages from a particular process into main memory, or to set parameters for a given process, or class of process so that it will not be swapped out.
View 1 Replies View RelatedI have never had this problem before but when i boot the system hangs for about 2 mins when brining up my harddrive I am using scsi disk support and the newer ATA driver for my Harddrive (the same as ive always used but for some reason the system just hangs for like 2 mins then boots normally
this is somthing that urks me and i know im missing somthing the platform is a hp nc8230 notebook please request any information or how to provide it as i am new to linux (kinda) but for the life of me i can't figure this one out
[Code]...
I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
(gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine) Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
--Manually uninstalling Oracle 10g--
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[code]....
Even in applications menu I don't see the if oracle has been installed. So i conclude first time installation was ok but somehow http client didn't worked. After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
I'm having an issue with Ubuntu 10.04 server, where it is not bringing up a console on the local machine.
The only display on the local screen (and in /var/log/boot.log) is:
Code:
fsck from util-linux-ng 2.17.2
/dev/sda1: clean, 100725/2342912 files, 781590/9357824 blocks
init: ureadahead-other main process (595) terminated with status 4
Hitting <alt>-<f[anything]> just brings up a blank screen with a single flashing cursor, and no login prompt.
The ureadahead message sounds like the classic Windows error: "The operation could not be completed because of the following error: The operation completed successfully." So ureadahead isn't the problem.
Also... ssh works, but other services (apache, mysql, smbd, nfs-kernel-server, etc) need to be started manually.
I have an old computer with 128 megs of memory and one hard drive of 120 gigs. I have gone back and forth between installing Ubuntu and Puppy. Right now, despite advice against it because of the limited memory, I am thinking of sticking with Ubuntu. Puppy has some problems but that is not what I want to address right now. What I want to ask about in this discussion thread is how to get Ubuntu onto the Internet.
I think I get it, but I want to be sure. There is a menu option called "Network Connections" and it opens a window that has several tabs. Since I have a wired connection, I click on the "Wired" tab where it shows my connection in a list box. When I click on Edit it opens another window that displays a MAC address and there is an "Apply" button. When I click on this, there is an Authenticate window that opens up and it prompts me for a password. Is this password that it is asking for the same thing as the password that my router uses?
I just got my electricity bill for July & August and noticed a dramatic increase in my consumption. Basically, the amount of electricity has almost doubled (from 433 to 748kWh) and the increase happens mainly between 5pm and 11pm, as well as during weekends... I did not have to search for too long before I pointed out the issue... My new home server. It is configured to auto WOL at 5PM and auto shutdown (Cron) at 11PM. It also runs 24h/day on weekends...
Here's the server's config:
Hardware:
MSI Platinum K9N mobo
AMD Athlon64 CPU
1GB DDR2 Ram (2X 512MB)
[code]....
Everything else is only "run-on-demand" or scripts... I am searching for suggestions on how to minimize the power requirements. The video card is going to be replaced soon, by a standard PCI 4MB videocard. Next I will get rid of the 80GB & 750GB HDD's to be replaced by a 1.5TB HDD...
I have recently started using this laptop as a host for tinkering with vmware. I have wicd installed on it, which normally brings up wlan0 and connects to the nearest configured wireless lan automatically.
Vmware has installed another, virtual, NIC on the host, called vmnet8. I configured it in /rc.d/rc.inet1.conf with a static IP.
Now when I boot up the laptop vmnet8 starts up and running and correctly configured, but wlan0 doesn't. I have the wicd icon in my systray but it doesn't find a network, even when i click on it and refresh etc. I have to open a terminal and "ifconfig wlan0 up" in order to get the NIC up. Then wicd works fine.
Networking configuration in Slackware looks like a bit of a nightmare frankly (why i usually use wicd!) so I thought i'd ask you chaps before messing about too much.
My new Squeeze machine detects all of my hardware including the LAN and WLAN cards, but only brings up the LAN card. There isn't even an entry for it in /etc/network/interfaces for me to modify. I tried adding the info manually but then the entire network wouldn't start. I had it configured as a static IP and I know the commands were correct due to them working on the LAN card. I believe that the name "wlan0" was causing the problem, but how else can I bring it up at boot?
View 7 Replies View RelatedRecently (I can't put an exact date on it but its been within the last few weeks) on boot I've had to wait two or three minutes for my system to bring up my network interface, in a way its never done before...The output of /var/log/boot.log is as follows:
Code:
Welcome to Fedora
Press 'I' to enter interactive startup.
[code]...
I have a client's linux server where someone added a script which sends spam mails from the server's local loopback address (127.0.0.1) all my seniors worked on it and couldn't trace the script on the server this issue was going for a week, now I have an idea to bring down the loopback interface of that particular server(ya, that was not a permanent solution but just had an idea), but my support manager told that it will bring the whole server down(so far as i have learn't loopback address is used only for testing the NIC card's functionality), is that really bring the server down.?. How ever i tried this using a test machine all the connections works fine even after i bring down the loopback interface. As my client's server is a production server i can't test it there without clear knowledge, can any one help me out whether will it bring down the server or will it cause any side effects on it(i know that you guys are experts so i am asking it here)?
View 5 Replies View RelatedI am running or was running a mail server. It used the titles service to scan emails but keeps bringing up a temporary failure right. But when I run the command 'amavisd' It brings up this error here:
[Code]...
How can I boot Debian 6 directly into the desktop without bringing up the login screen or login password?
View 6 Replies View RelatedI'm running Slackware 13 with a custom kernel based off of 2.6.32.3. I tend to leave my system on 24/7, as well as my web browser. Originally it was Firefox and now it is Google's Chrome. Usually about a day of leaving the web browser open my HD activity spikes so high that I can barely do anything on the system until I kill the web browser. This has been happening with both Firefox AND Chrome! As soon as the browser processes are killed, the system returns back to normal.
View 10 Replies View RelatedDoes anyone know Oracle e-Delivery (link below)? It looks like free download of linux is available form this site.
[URL]
1. What is the difference between Oracle Linux x86 32 bit and x86 64 bit?
2. How can I verify which one (x86 32 bit vs. x86 64 bit) I need for my PC?
3. What's the difference between the two below (one with Source and the other without 'Source')? I am trying to figure out which one I need.
- Oracle Linux Release 5 Update 2 for x86_64 (64 Bit)
- Oracle Linux Release 5 Update 2 Source for x86_64 (64 Bit)
So I am basically just curious about this, but is there a way to prevent fork bombs from bringing the system to grinding halt in Ubuntu, without setting hard limits on the resources available to users? I read about fork bombs on Wikipedia, and being the masochist I am (and not having any unsaved work), I tried entering those 13 characters into terminal. Wow. I have never seen a computer freeze up so fast.What really peaked my curiosity is that the same fork bomb has almost no effect on the performance of Mac OSX (10.6). I know that one can limit the availability of resources to specific users. Is that essentially what Snow Leopard is doing?
View 9 Replies View RelatedI installed Oracle Linux 5 and now I can not boot into Vista. However if I use Debian Live CD Vista is there and looks fine (as far as I can see). Is there a way I can use a live CD to fix grub? I have googled it but none of the commands I found worked.
View 9 Replies View RelatedMy Setup: Dell Laptop (BIOS allows boot from USB) - Vista 32 bit installed, 4 GB memory
External 500 GB HDD (iOmega) - Partitioned as follows:
NTFS: 50 GB
/boot: 1 GB
below two on one logical volume:
swap: 5 GB
/: rest ~ 440 GBI installed Oracle Enterprise Linux on the external HDD.
Did not install the Grub bootloader as I don't really want a startup boot option. The way I was planning to make it work was: When USB HDD connected and laptop powered up, it'll boot to the Oracle Linux. When the USB drive is not connected and laptop powered up, it'll boot to Vista. When I boot with the USB HDD connected, nothing happens. I get a blank screen with a blinking cursor. The USB HDD light comes on though. Is the above plan possible, or do I have to have a Boot loader installed?
If I have to have a boot loader installed, how can I just install the bootloader and not have to reinstall Linux on the HDD. The Linux drive is currently empty, so I'm open to any good suggestions to partitioning it. I want to keep a small amount of NTFS space on that drive to store some windows files and documents that I can carry around. The rest 450 GB is open for Linux. And I Plan to install Oracle Database and Apps on Linux (which takes about 350 GB of space).
me as to how i should go about accessing the oracle-xe db that I just installed on my ubuntu 10.04 notebook via sqlplus? I have successfully installed the �oracle-xe 10g server� and client� and I can access the admin page from the browser.However when I try to say sqlplus on the s me this:�error while loading shared libraries:libsqlplus.so: cannot open shared object file: No such file or directory�I have set the paths and variables right Im sure, but I just cant connect with sqlpolus
View 1 Replies View RelatedOn RHEL 5.2, i have installed Oracle client 11.1 and Php 5.1.6. After that i somehow installed and configured oci8.so. When i do phpinfo Under oci8 it shows oci8 support enabled.However on running php program that connect with oracle database i get following error PHP Warning: oci_connect() [<a href='function.oci-connect'>function.oci-connect</a>]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that ORACLE_HOME and LD_LIBRARY_PATH are set and point to the right directories in /var/www/html/index.php on line 5
View 5 Replies View RelatedI am wanting to purchase a desktop or workstation to run Oracle 11g and E-Business suite -- Does Dell have Redhat OS and will a desktop or workstation be the best setup
View 2 Replies View Relatedi need to deploy oracle packaged thorugh unix instead of using SQLplus where in you can directly type the commands.
View 4 Replies View Relatedi have linux redhat (OEL rel 5) on the development server, that is being used for my project. i wanted to install oracle client version 10.2.0.1 on my box. i decided to use silent mode installation, but i am unable to find proper steps in making a response file and running installer in silent mode i went throught the manuals and refered some of the sites, but there is lots of confusion regarding the pre-installation tasks like setting the environment variables,etc
View 1 Replies View RelatedI tried to install oracle 11r2 in red hat el5. [root@perf Downloads]# uname -a Linux perf.com 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:21 EST 2007 i686 i686 i386 GNU/Linux
some of the prerequisite patches are not updated
Current Requirements
gcc-4.1.1-52.el5 gcc-4.1.2
libgomp-4.1.1-52.el5 libgomp-4.1.2
glibc-2.5-12 glibc-2.5-24
[Code].....
we need the following files,where can i download it?
I serached in net.but there is no use.most of them related to fedora core
I have a newly built RHEL 5.2 machine and Oracle (10.2.04)was just loaded. I have a startup script that was provided by one of my coworker admins, which "works" but I need info on exactly where to put it, and whatever else needs to be done to correctly start/stop the oracle deamons. Would rc4.d be the right place?
View 5 Replies View Relatedi want install oracle 10g to redhat 5 i want to change bash_profile.but I can't find it when I looked to the /home/oracle/..
View 2 Replies View RelatedI just found that PMON and SMON are running (i.e., showing in the output of ps -ef | grep -i [o]ra)but when I check MMAN (used for internal database tasks), nothing comes up:
Code:
ps -ef | grep -i [m]man
Is that okay or could there be some problem?
So, what are the essential processes of an Oracle Databse that we must check for their status to make sure that the Oracle Databse is up and running fine? What steps do you usually take to validate an Oracle Databse on a Unix / Linux (Production) Server (specifically immediately after a CR has been worked upon)?
im a newbie in this of linux. I want to have a linux virtualbox with DB servers like Oracle, MySQL, PostgreSQL and so on, so i installed Fedora in virtualchine of virtualbox. In the network configuration i set the Bridge Connection to enable Fedora to get IP from DHCP and it works fine. After that i've installed Oracle 10G Express and it works fine, i can connect without problems to oracle admin web application from Fedora. Previously i checked if port 1521 is open on fedora so when Oracle is running i use nmap and i get this:
Code:
nmap locahost
Starting Nmap 5.21 ....
[code]...