Server :: Snmpwalk Doesn't Work On Local Ip?
Dec 17, 2010
I have a server that has snmp installed(Version is net-snmp-5.3.2.2-9.el5_5.1). This server has 5 n/w interfaces with diferent ip's. My problem is when i try snmpwalk on to the main interface, in my case "bond0" with the assigned ip address there is no response.
eg: snmpwalk v2c -c nature 172.17.241.190
No Response from 172.17.241.190
But when i run the same query with "localhost" snmpd responds.
eg: snmpwalk v2c -c nature localhost
[Code].....
I want to snmpwalk in to the "172.17.241.190".
View 2 Replies
ADVERTISEMENT
May 22, 2010
I just installed skype 2.1 beta 2 (the deb file) from the skype website, but the only option I see under Sound Devices -> Recording is "PulseAudio Server (local)" This doesn't work for me, as the skype test calls don't actually record anything I say. I use skype a lot and FINALLY got it working under karmic, but I needed to upgrade to lucid and now it's broken.
When I open Sound preferences and look at the Applications section, Skype shows up as recording when I run its test call... but no sound is recorded? How is it possible that my sound card picks up something recording but doesn't actually record it when I'm in skype?
View 9 Replies
View Related
Aug 17, 2010
8.04 on a Lippert PC104, no xwindows. This is a little computer intended to just run one program headless in an instrument i am developing. I would like to run this one program from boot.The obvious answer is to add the program to rc.local followed by an &. This doesn't work.I have tried adding all sorts of things to rc.local including mkdir, touch, echo etc etc. the only utility that works is 'touch' which tells me that rc.local is getting executed.I tried creating a new service called local and putting that in rc2.d as priority 80 using rc-update.d. again, only touch worked. so i tried adding sleep 10 and running the utilities as daemons and still they won't run (except touch /var/lock/local).
View 5 Replies
View Related
Oct 21, 2010
Every time I boot my machine, some of the playback values in alsamixer are set to 0 and are muted, so I have no sound.
The thing is, I have tried setting these to normal levels and then run sudo alsactl store. Then, if I run sudo alsactl restore after I reboot, the sound comes back up. However, if I have alsactl restore in /etc/rc.local, it doesn't work: I still get muted sound when I reboot. I have to run sudo alsactl restore manually each time.
I have already checked whether /etc/rc.local runs at startup, and it does. Also, I know that /var/lib/alsa/asound.state contains the correct values, because when I run sudo alsactl restore, the sound returns to normal levels. So what remains is either alsactl restore doesn't work in /etc/rc/local, or something runs after it and mutes the sound.
View 5 Replies
View Related
Jul 18, 2011
I have an appliance called my_appliance.raw. To start the appliance locally, I use:
[code]...
After that I would like to ssh into the guest from the host but just the ssh command doesn't work. firewall is disabled on guest. the ip I use is the one that ifconfig shows when I run it on guest. sshd is running.
View 2 Replies
View Related
Aug 30, 2010
I use snmpv3, and experiencing problem in passwords containing special symbols like "!". For Ex.: snmpwalk -v 3 -a SHA -A xxxxxxx!xx -l authPriv -u user -x DES -X xxxxxxx <IP address/Name of device> -bash: !xx: event not found I also tried using "" before "!" in passwords for ex. xxxxxx!xx, but then I have failed authentication.
View 2 Replies
View Related
Dec 10, 2010
how to setup a local mail server for internal testing on my php development work. For example if I sent an email using php script to [url]....I should be able to check the mailbox of 'someone' either in Outlook or SquirrelMail.I have done some reading about this. All I know is that I need Postfix with Courier. But I just don't know to get it working.
View 3 Replies
View Related
May 21, 2011
Server Apache doesn't work.Note the LOG line,you cannot modify or delete "logs/"
View 1 Replies
View Related
May 26, 2010
small office network with Linux CentOS 5.4 internet server. I use Squid 2.6.STABLE21. I have static IP.If I masquerade my small office net FTP works, but if I disable masquerade then FTP doesn't work through Squid.I was trying to stop iptables but the problem was the same.
View 9 Replies
View Related
Jun 1, 2010
I have a simple cron job that runs every night & I tested this manually by just running the command as root in bash and all worked fine. It took some time but the crob job finished and I got my results emailed to me perfect / as expected.
Here is root's cron job listing:
Code:
Now I noticed that I never ever got anything emailed to me the following day so I am wondering if perhaps the Cron daemon doesn't have permissions or has an issue running / executing the command rather than when I test the command as 'root'? When I view my logs, I can see the command being executed and don't see any errors however I don't get email results when Cron runs the job rather than me taking the command and running it manually in Bash...then it works. What am I missing?
Code:
View 9 Replies
View Related
Apr 17, 2011
host - ubunut 1010 desktop 64bit
virtualizer - VirtualBox ver 3.2.10 r66523
guest (VM) - ubuntu 1010 server 64bit
[code]....
View 1 Replies
View Related
Jul 25, 2011
My ftp server runs vsftp. The ftp passive ports stopped working while iptables is running, so users can't ls their dirs. I know that you need to load the modules of ip_conntrack and ip_conntrack_ftp, the problem is when I modprobe ip_conntrack I get the error: FATAL: Module ip_conntract_ftp not found. No that is not a typo. ip_conntract_ftp? Am I missing something?
View 2 Replies
View Related
Apr 25, 2011
I am trying to install some packages in a ubuntu 8.10 server, however, apt-get doesn't work (I get several 'not found' errors). Is there any way to do that? I know this version is probably not supported anymore but I can't just format a customer server because it's OS is outdated...I just can't put my sources.list on it because I am on ubuntu 10.10 and it would download updates for the wrong OS probably causing a huge damage on the old one.
View 9 Replies
View Related
May 1, 2011
Have done a fresh install of 11.04 32bit and after getting everything to work I have run into a 11.04 killer for me. PS3 Media Server don't work It doesn't detect the PS3 correctly and on the PS3 side it just keeps saying "data corrupted" for every video I try to play. It used to work perfectly on 10.04.
View 3 Replies
View Related
Mar 28, 2011
I have a computer that I would like to backup the home directory onto a server. I created a script called wien_backup.sh that contains the following:
#!/bin/bash -l
/usr/bin/rsync -rv --delete-after --ignore-errors -e /usr/bin/ssh root@wngr403-unix2:/home/ /space/systemimager/Wien/
where wngr403-unix2 is the computer I am backing up, and the script is ran from the server. If I run the script by itself, it works just fine. If I run it as a cronjob, the /var/log/syslog says it ran, but it does nothing.
View 6 Replies
View Related
May 22, 2011
postfix
Code:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
[Code].....
Followed [URL] ubuntu 11.04 server
View 3 Replies
View Related
Jan 28, 2010
I used fedora12 builded mail server uning sendmail and dovecot at my home, when I at home everything are works fine, no matter I sent email to hotmail, or hotmail sent to my mail server, but I got the problem that I can't access my home server when I at office, the error messages as below:
#telnet xxx.xxx.xxx.xxx 110
-ERR Cannot connect to POP server xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx:110), connect error 10061
#telnet xxx.xxx.xxx.xxx 25
[code]....
P.S there is no firewall between the my office and home
View 3 Replies
View Related
Apr 28, 2010
I have a dedicated server running CentOS 5, Plesk 9.2.2, SMTP Postfix and Courier-IMAP.The issue I have is that on all domains on the server receiving email works fine however sending email never seems to work. This is from email programs, my phone, webmail and PHP. None of them seem to be able to send email. If it is of worth Spam Assassin is running however I don't feel it is causing any problems.
View 7 Replies
View Related
Apr 11, 2011
My mother runs Ubuntu 10.04 on her home computer, but on her workplace they use some version of Windows. Her IT-guy sent her a .rdp-file for logging in to her workplace server. This file doesn't work in Ubuntu, and the IT-department at her job can't solve the problem. Ergo; She's unable to log on to her workplace computer/server from home.
View 3 Replies
View Related
May 29, 2011
After I finished upgrading Xubuntu from 9.10 to 10.04, I discovered that my keyboard stopped working in X Server. The upgrade process was running smoothly until the last moment, when it produced some error, which I, unfortunately, did not write down. Anyway, the upgrade has completed; uname shows kernel version 2.6.32-31. Now the keyboard works fine if I select a recovery mode at startup, but if I type 'start gdm' from the shell or select the default option in GRUB while booting, the keyboard becomes unavailable right from the login screen. I can log on using the virtual keyboard, but that's all I can do; the keyboard is still dead.
View 5 Replies
View Related
Dec 5, 2010
I can see that in yum-updatesd configuration i can use smtp_server to rely mail notifications as per below outputs from man pages smtp_server SMTP server to use when sending mail, host or a hostort string. Defaults to localhost:25. The problem that this option doesn't work at all and it rely into the local MTA not the one set on the smtp_server
View 2 Replies
View Related
Mar 14, 2011
2 machines (one of them working as a server to monitor the network with IP 192.168.100.110 and the other one to be monitored with IP address 192.168.100.1):
In the first machine:
snmpwalk -v1 localhost -c public sysName (working fine)
snmpwalk -v1 192.168.100.1 -c public sysName (don't works -> Timeout: No Response from 192.168.100.1)
In the monitored machine:
snmpwalk -v1 192.168.100.110 -c public sysName (it works)
snmpwalk -v1 localhost -c public sysName (dont works -> Timeout: No Response from localhost)
View 6 Replies
View Related
May 11, 2009
I am new in linux,I installed apache-tomcat on fedora.I can view all web pages on localhost:8080 but when I try to view them by server's url address from another computer, I don't get respond.Can it be a firewall problem or something else?
View 4 Replies
View Related
Feb 7, 2010
So here is what I'm trying to do: I want to share a folder and have it so that guests can access it, but only read. I also want to make it possible that I can mount it as a network drive on my Windows 7 machine and login with my linux account so that I can have write access. This is from a completely stock Ubuntu 8.10 and Samba config. Everytime I've tried I've failed to get it working.
View 1 Replies
View Related
Sep 28, 2010
Using Fedore 12 I am trying to mount on a server with the following command: # mount -t cifs //samba-pool-suse/pool-suse /mnt -o user=xxxx I was waiting that the system askme the user password and thats all, but the answer is: mount: wrong fs type, bad option, bad superblock on //samba-pool-suse/pool-suse, missing codepage or helper program, or other error (for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount.<type> helper program) In some cases useful info is found in syslog - try dmesg | tail or so using:# dmesg | tail returs: CIFS VFS: cifs_mount failed w/return code = -22
View 3 Replies
View Related
Mar 2, 2011
does anyone know how can I use locate with rm? rm `locate "some file"` does not work when my pathnames occasionally contain:
-spaces and other characters (like + or possibly others that need escaping)
-greek characters
how can I grab line-by-line the output from locate and wrap quotes"" around the paths?
View 5 Replies
View Related
Nov 19, 2009
Trying to migrate our news server to a new instance on centos5 and having issues with the makehistory utility. It errors out and then just creates all null values for the overview database. Here is the output:
[root@server overview]# /usr/lib/news/bin/makehistory -O -x -F
*** glibc detected *** /usr/lib/news/bin/makehistory: free(): invalid pointer: 0x000000000063ce60 ***
======= Backtrace: =========
[Code].....
View 12 Replies
View Related
Sep 26, 2010
I followed this tutorial: [URL]
After this tutorial I did:
root@web1:~# /etc/init.d/snmpd restart Restarting network management services: snmpd.
As far as I think evrything went ok. I want to test my config with: snmpwalk localhost -c public -v1
I get this error: bash: snmpwalk: command not found
View 6 Replies
View Related
Apr 12, 2011
when i am enabling mysql in server (port 3306) it does'nt work. but when i execute iptables -F it works what may be the reson?
View 6 Replies
View Related
Jun 1, 2011
I am trying to setup forward mails to a user in my linux server to procmail. But that doesn't work. My $HOME/.forward looks like the following
[Code]....
View 7 Replies
View Related
