I use snmpv3, and experiencing problem in passwords containing special symbols like "!". For Ex.: snmpwalk -v 3 -a SHA -A xxxxxxx!xx -l authPriv -u user -x DES -X xxxxxxx <IP address/Name of device> -bash: !xx: event not found I also tried using "" before "!" in passwords for ex. xxxxxx!xx, but then I have failed authentication.
View 2 RepliesI followed this tutorial: [URL]
After this tutorial I did:
root@web1:~# /etc/init.d/snmpd restart Restarting network management services: snmpd.
As far as I think evrything went ok. I want to test my config with: snmpwalk localhost -c public -v1
I get this error: bash: snmpwalk: command not found
Just upgraded from UBUNTU to FEDORA 11. Installed most add on programs such as cacti & mysqld using YUM INSTALL. With help of 'scottro', I finally got cacti running, but still finding errors (most problems caused by different directory locations in this particular distro).
snmpwalk Binary Path
The path to your snmpwalk binary.
[ERROR: FILE NOT FOUND]
snmpget Binary Path
The path to your snmpget binary.
[ERROR: FILE NOT FOUND]
snmpbulkwalk Binary Path
The path to your snmpbulkwalk binary.
[ERROR: FILE NOT FOUND]
snmpgetnext Binary Path
The path to your snmpgetnext binary.
[ERROR: FILE NOT FOUND]
Does anyone know where are these directories located in Fedora (11)? Is there a way to find where a directory is located (normally i use 'whereis' )? No such problems when using UBUNTU...
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
I have intalled RADIUS server on one machine which has fedora 10. I have installed freeradius-server-2.1.10 on it(server machine IP 10.150.110.42).
I have one more machine with redhat linux on which i have installed pam_radius-1.3.17(client machine IP 10.150.113.4).
I have done the follwoing configuration at both sides
SERVER SIDE.
users file
"vijay" Auth-Type := Local, Cleartext-Password == "123qwe", NAS-IP-Address == "10.150.113.4"
Reply-Message = "Hello, %u"
[Code]....
Above mentioned is my configuration. when i try to connect client with SSH it is not sending a request for authenticating user to RADIUS server. what else configuration i have to do, or if there are any mistakes in my configuration
If your machine is connected to the Internet, you'll probably want to disallow ssh password authentication (which is advised but not mandatory). Edit the /etc/ssh/sshd_config file and change/add the following lines:
PasswordAuthentication no
AllowUsers nx
Don't forget to restart the sshd daemon after making that change: service sshd restart I already have PasswordAuthentication yes in my file as I need it to login to the server through ssh. Do I just skip that line and only add AllowUsers nx mynxuser at the end? Also, I followed the rest of the manual and when I tried the client on Windows it failed: I put in a user and password to login but shouldn't it be using the key instead? I think the problem is related to the above due to:
Quote:
NX> 203 NXSSH running with pid: 1428
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[code]...
I have a server that has snmp installed(Version is net-snmp-5.3.2.2-9.el5_5.1). This server has 5 n/w interfaces with diferent ip's. My problem is when i try snmpwalk on to the main interface, in my case "bond0" with the assigned ip address there is no response.
eg: snmpwalk v2c -c nature 172.17.241.190
No Response from 172.17.241.190
But when i run the same query with "localhost" snmpd responds.
eg: snmpwalk v2c -c nature localhost
[Code].....
I want to snmpwalk in to the "172.17.241.190".
I have ubuntu9.10 installed inside windows Thunderbird works ok in windows. When i try to get my email in ubuntu9.10 i get this message. server responded authentication failed.
View 2 Replies View RelatedI made a system in CentOS5.5. I used Tomcat6 and PostgreSQL. But I couldn't enter my system. There are some error. And I don't understand what kind of error this.
JDBCExceptionReporter.logExceptions(100) | SQL Error: 0, SQLState: null
JDBCExceptionReporter.logExceptions(101) | Cannot create PoolableConnectionFactory (FATAL: Ident authentication failed for user "postgres")
"postgres" is username.
Is anybody knows anything about this error message.
If I am running a script, let's say a install script. Is there a way to make Su repeat authentication rather then just returning "Authentication failed" and continuing the script?
View 3 Replies View RelatedWith /usr/bin/canberra-gtk-play set to --id='desktop-login' in the startup Applications dialog one expects a sound to play at login. This is not the case with fedora 12. I set the variable to --file=/home/me/sounds/myloginsound and I got sound.
I'm curious as to why the event id failed. I suspect that id was not linked/associated with any sound before fedora 12 was released. How does one troubleshoot sound event ids and their associated sounds in f12.
I'd like to get audio when I log out as well. I recall seeing a dialog box with events and associated sounds in f11 (or was it f10?) .... I don't see it in f12
1. Does anyone know which package adds that functionality?
2. In the absence of a GUI approach, how can this be achieved (with the terminal)?
Failed to open system log, no event information will be available.I am using Firestarter 1.0.3 With Ubuntu 11.04
View 2 Replies View RelatedI haven't updated my centos box for almost about a year, my theory is if it ain't broke don't fix it.These last two weeks I've been replacing hardware, a motherboard, memory, processor, and a hard-disk. Everything worked fine with the current 2.6.18-128.1.10, but I decided that I should upgrade to the latest along with all the new packages. But in doing so I would need to recompile the driver module for the raid controllers, rr1740. So I recompiled them using the 2.6.18-164.1 build while I was in kernel 128. When I was done, I restarted the machine and when it booted to the new 164 kernel, it came back very long error messages but here's what I can remember off the top of my head.
View 14 Replies View RelatedGcc seems to be installed by not configured maybe?Below are some command line resultsIs gcc installed, and if so, how do I configure it so it run properly.
rpm -qa | grep gcc
libgcc-4.1.2-44.el5
gcc-4.1.2-44.el5
[code]....
I am using rhel5 with ip 192.168.0.254.i am using rhel on vmware 7. when i run links 192.168.0.254 then i got error "bash : links : command not found" i want to know why this error is showing? when i use red hat without vmware then there is no problem.
View 2 Replies View RelatedI got a problem with my CentOS server. Somebody told me OpenVPN Requires different changes inside my firewall settings. That could be the problem why openvpn wont load..I receive this error on my CentOS panel when im trying to connect into the centos openvpn (with my winxp pc):
Thu Sep 17 20:31:36 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622
Thu Sep 17 20:31:38 2009 Authenticate/Decrypt packet error: packet HMAC authentication failed
Thu Sep 17 20:31:38 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622
[code]....
I got a problem with terminal, since i'm really a noob with terminal i don't know how to fix it.Everytime i type in a command it shows for example:
-bash: ls: command not found
Even the basic commands don't work... just cd <directory> and those things works
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
I have a problem with ldap client authentication in ubuntu. I am using rhel5 as openldap server and I configured ubuntu as client, when I am trying to login the following message is coming."su: Authentication service cannot retrieve authentication info. Sorry"
But when I do search through "ldapsearch" command output is coming without any errors, Can anybody explain what would be problem.
I have a network and am using squid proxy with authentication I want to create another subnet without authentication.
View 1 Replies View RelatedBash acts weird in 10.04 server. Whenever I try to run .sh scripts, every empty line in the script results in "command not found". Then on even simple scripts I get syntax errors, but the same exact scripts work on my 9.10 desktop installation. There's also another problem, I'm not really sure if it's bash-related. After setting the proxy using
[Code]...
I would need a lead on how to shutdown several virtual machine on our ESX server. We put in place a UPS and now we want to implement a automatic shutdown of the VMs (in a certain order) when our UPS battery goes under the threshold. I do monitor already the battery state. So I just need to put in place the eventhandler. How to proceed?
View 1 Replies View RelatedI have just installed Fedora 15 on my laptop, Now i am trying to install some programs like .... skype, drivers to my printer etc but i get this message: Failed to obtain authentication.... when the installer is trying to solve dependensies...
I have tried to log in as su but i cant that ether due to fail password or username... that is the message i get at the log inn screen.
I'm wasting hours on this problem: I'm setting up an always-connectable VNC server loaded via xorg.conf.
This is what I did: yum install vnc-server
I have a process where by all SVN repositories are held in /var/svn/[domain]. I have set-up a post-commit hook to automatically checkout the repository to the development site and delete all .svn directories recursively through-out.I intend to run a bash script (as below); this is where my problem lies. EVERY repository is "Open" and anyone can read, write and commit the repository, however thus is secure via HTTP Authentication, using htpasswd.
Because the hook is automatic, I would like to be able to collect the current user/password but I don't think it's possible so I have created an account for the system called "svnroot" with a password.How can i authenticate through the HTTP Authentication via my bash script?
I wanted to install it on a secondary computer in my house for web browsing and little-to-nothing more.
How can I fix or get around the error 'Authentication failed' when attempting to login?
I just installed openSUSE. The installation seemed to go well. After installation, everything loaded up and I was using the OS with no problems.
I restarted the computer to change my boot sequence in the BIOS. Then I got to the openSUSE login screen. I was presented with three options:
1. my username - When I enter in the password I specified during the OS installation it says "Authentication failure"
2. Automatic Login - just says "Permission denied"
3. Other... - Nothing seems to work here
How can I login?
After 72 hours googling for this I found nothing. I have problem with pppoe on ubuntu 9.10.
On fresh installed ubuntu i tried to establish pppoe connection with this command:
Code:
This (pppoe) doesn't work from the live cd
I have been used NX client on windows 7 connected to ubuntu with NX client/node/server with no issues. The matter started when I have formatted Ubuntu and reinstalled NX, from that NX connects but shows a key error as follows:
NX> 203 NXSSH running with pid: 4328
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[code]....
I just finished following the instructions found here to install FreeNX on my ubuntu 10.04 server. It went smoothly, just used the default keys.Once I had that all set up I scrolled down and followed the instructions to set up the client and that went fine as well.My problem is with actually using the program.When I try to log in I get the error "Authentication failed for user tony" (my username). Do I need to change anything in the configuration other than setting it to use gnome and putting in the host address?oes it make a difference that my ssh settings only allow rsa login? I logged into the server with ssh to see if that helped but it did not. I even tried using the ssh key with the FreeNX Client but that did not work
View 9 Replies View RelatedI am trying to setup Postfix along with dovecot on RHEL4. I have done the necessary settings in dovecot.conf, yet I am not able to log into the POP3 server. The error I can see through WireShark/Ethereal is "Err- Authentication failed" Some of the important settings in /etc/dovecot.conf are
disable_plaintext_auth = no
auth_mechanisms = plain
auth_userdb = passwd
auth_passdb = pam
auth_user = root
The users/passwords are setup on Linux file system without MQSql or any other database. SASL etc is not configured at all.