Fedora :: Get An IP Address From The Dhcp Server?
Apr 13, 2011
I have a network with one of the server machine being under Fedora 14 and the clients machines being under Windows 7 and Fedora 14.
Quite often I get some difficulties for the clients to get an IP address from the dhcp server. If I look at the server logs, it looks like the server sees the requests and sends and answer:
Apr 12 19:33:18 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:18 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:33 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
[Code].....
View 8 Replies
ADVERTISEMENT
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
Feb 12, 2009
I have installed Fedora 10 on my A860 Dell Vostrol Laptop with AR242X Atheros Wireless card. Wireless card worked out of the box and i could detect wireless network and connect to it. But i have a problem that, my wireless connection is not able to get IP address from the DHCP server. Please help me out what can i do to get this working. I am using WEP security and authentication is open system.
I have windows 7 beta installed on the same machine and on that wireless network works fine so i am sure that there is no problem with the wirless network. I am using DIR-300 router from D-LINK. I tried to see packet log on wireshark and there i see that there is no reply to the DHCP discover message. Actually i don't see any RX packets at all. Which is not normal as there is traffic on the network.
View 14 Replies
View Related
May 24, 2010
I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.
However it does not get an ip address from the DHCP server. Below is what I get in the messages log:
View 1 Replies
View Related
Apr 27, 2011
I'm running gnome desktop on squeeze system. When I boot my system seems to be using my internet modem as its dhcp server. The rest of the machines on my lan are correctly using my router for that purpose. As a result, what happens then is that my debian machine frequently gets a duplicate ip address assigned to it. I would like to specify to my debian computer that I want it to use the specific fixed ip address of my router for dhcp purposes.
View 9 Replies
View Related
Nov 10, 2010
I have an Ubuntu Server 10.04.1 that I have given a static IP address. Every six hours or so I will lose connectivity to it and when I type ifconfig to look at the network information, it has been given an address via dhcp. If I run the /etc/init.d/networking restart command the IP address goes back to my static address and things are fine for another 6 hours or so. Here is what is in my interfaces file:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.60.82.15
netmask 255.255.0.0
broadcast 10.60.255.255
gateway 10.60.254.254
This machine is also a DHCP server and I checked to make sure there are no other DHCP servers on my network. Right now my fix is to have a Cron job running that runs the reset command every 5 hours, but I would like to find a more permanent solution.
View 8 Replies
View Related
Aug 6, 2009
I am attempting to get this network card running under CentOS 5.2 but have had no luck. Some sites say to use the sk98lin driver, others the skge, which I can't find at all. I have tried multiple versions of the driver in rpm but none seem to work. The card shows under the network manager but will not get an IP address from the DHCP server.
Here are the outputs for this card.
uname -rmi
2.6.18-92.1.10.el5 x86_64 x86_64
lspci -m
04:01.0 "Ethernet controller" "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)" -r11 "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)"
lspci -n | grep "$(/sbin/lspci | awk '/net/ { print $1 }')"
04:01.0 0200: 1186:4b01 (rev 11)
lspci -vv
04:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)
Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 121
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at e800 [size=256]
Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
How to get this working as we have 3 of these cards for computers without a Gb NIC and I don't want to fight with it 3 separate times.
View 2 Replies
View Related
Jul 8, 2010
I want to set up a dhcp server such that the clients get same ip every time. Giving fixed address to every client would be a long process.
"I don't want to assign a specific ip to the client but what i want is the server provides same ip every time"
View 6 Replies
View Related
May 18, 2010
I have installed a working DNS server on my home network. I have an unique server, devoted to dns, gateway, storage which runs opensuse 11.0 (I known that it is rather old). Two new clients require DHCP. I have installed, using yast, a very simple DHCP server, according to the following config:
option domain-name "XXX.XXX";
option domain-name-servers 192.168.0.1;
option routers 192.168.0.1;
[code]...
(I have tried to add "ddns-update-style none", and to remove the ntp-servers option, since my server is not a time server, without success). Unfortunately, even if the client (a mac running OSX 10.4) receives a right IP and gateway address, it displays neither dns server address nor default domain name. The same mac, on my office network (not managed by me), receives everything.
View 5 Replies
View Related
Nov 1, 2010
The cable internet I'm using runs on Dynamic DHCP IP addresses. I changed it to a static IP address in my router settings, but it keeps changing. This means that I can't connect to my home server from a remote location.
Is there anyway to run my ubuntu server on a DHCP IP address without connecting through my router 192.168.1.xxx?
View 1 Replies
View Related
Dec 26, 2009
For changing the the mac address of my lan card( eth0) in linux fedora 9(solphur) i used this command
And i could change my mac address successfully but now i couldn't connect to my network via a dhcp server ( in configuration section of my router im going to check my new mac address (because i want to spoof) ,how i can do that?
View 7 Replies
View Related
Sep 24, 2010
First, (for samba) how do I determine whether my computer "gets IP address information from a dhcp server on the network," and whether "the dhcp server provides info about WINS servers ("NetBIOS name servers") present on the network," and consequently whether a change to my smb.conf file, "so that DHCP-provided WINS settings will automatically be read from /etc/samba/dhcp.conf," and whether the dhcp3-client package must be installed?
View 2 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Jan 24, 2009
I noticed that my internet connection wasn't automatically brought up each time I logged into Fedora so I opened the system-config-network tool and edited my network adapter by checking the box marked "automatically start at boot/login." To my surprise, the connection went down and upon trying to click on the device to let the manager bring up the connection the greyed-out phrase "device not managed" appeared underneath the device name and wouldn't allow me to connect.
Even when I used ifconfig/dhclient to get the connection up nothing happened. I could get the router to assign an IP address through DHCP, pinged a few sites to make sure it was legit, but still couldn't use firefox to browse anything. Seems as if network manager GUI is conflicting with command line attempts to bring the network up. I'd like to permanently disable system-config-network if possible because it's acting screwy!
View 5 Replies
View Related
Mar 12, 2011
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
View 1 Replies
View Related
Feb 20, 2009
When I install Fedora 10 on a new system, I let it default to DHCP. Later, I change the system to a fixed IP address by running system-config-network, selecting eth0, clicking on "Edit", clicking on "Statically set IP addresses:" and filling in the blanks. Is it possible to accomplish the same thing using commands that could be entered in a script? I assume one of them would be
Code:
ifconfig eth0 address XXX.XXX.XXX.XXX netmask 255.255.255.0
View 1 Replies
View Related
Jan 2, 2011
My DHCP setting is disabled in fedora 12 . Previously i was using static IP address. I Want DHCP setting enable, any idea.
View 1 Replies
View Related
Aug 3, 2010
I am struggling with what might be a minor problem. I have a home computer which I would like to setup as a webserver and hence give it a static IP address. It is connected to by wire to a router that is connected to the WAN via PPPOE. If I enable the network card on DHCP it works fine in browsing the web. If I now set it to static IP address it does not brown. Essentially I use the command setup to run the static IP setup. I then set my IP address to 192.168.254.X , the subnet mask 255.255.255.0 and the default gateway to 192.168.254.1 (this is the router connected to the WAN). I am able to ping the router, however when I try and browse on static it does not work. Your help will be most appreciated as this has taken way too long to solve and I have Googled as much without success.
View 5 Replies
View Related
Oct 22, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 6 Replies
View Related
Jul 1, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 2 Replies
View Related
Mar 8, 2010
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies
View Related
Aug 4, 2010
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies
View Related
Jun 3, 2010
I had 200 workstation with both Windows XP and SuSe Enterprise Linux. Sometime, a few clients can't get IP address from DHCP with SuSe OS. With the same computer, if I reboot and chose Windows XP, it work fine. The log message or the boot message was "No IP Address yet ...backgrounding". I tried to reconfig network device, restart services, change another port, change another line LAN, set static IP Address .... but there's no luck for me.
View 5 Replies
View Related
Jan 13, 2011
Is there a way to configure DHCP IP Reservation thru MAC ? eg. {MAC ADDRESS} 192.168.1.23 So, when somebody owns this MAC address leases IP, it will give the one in reservation. Also, for security in mind, DHCP will ONLY lease IP if its MAC address is listed, otherwise, DHCP will NOT give IP.
View 1 Replies
View Related
Nov 29, 2010
I have a Debian VM on Windows that is not getting an IP address assigned by the DHCP. I tried, ifdown eth0 and then ifup eth0 and still no IP address. my interfaces file looks like this:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
[code]....
View 4 Replies
View Related
Apr 9, 2010
I've just installed opensuse 11.2 with the network installation iso. During the installation, it has got the IP via DHCP without any problem, and I has downloaded all the needed packets without problems... But when the installation finish.I have no network connection It's strange, because I have IP address, I get the IP from the DHCP server, and I can see the IP addreess if I do "ifconfig", the default route and even the DNS servers in the resolv.conf file; but I cannot ping my gateway (that is the DHCP server as well!!), I cannot ping anything in my network and either anything in internet. I see a network error at the start, but it finally gets the ip address. In the dmesg, the last message repeats over and over. The machine is a Hyper-V virtual machine, but as I said... I worked very well during the installation, I don't know what is going on. I've tried to reinstall, but it doesn't make any difference
View 2 Replies
View Related
Jan 16, 2010
Can't change from dhcp to static ip address.I've installed Oracle's version of Linux Redhat 5, but I'm having no success changing from dhcp to a static IP address. My machine is plugged directly into a Belkin router which has the IP address: 192.168.2.1.If I use the gui: /usr/bin/system-config-network and set the network device to dhcp,it works fine. But if I set the IP address manually, I get no internet traffic, and if I ping an internet website, "network unreachable".The installation instructions for Oracle say that they want a full domainname. I've tried gateway.2wire.net. This worked in the last place I did a successful installation.It was the address of my ATT router. If I plunked that into a browser, I got the router configuration.
View 7 Replies
View Related
Oct 13, 2010
I would like to define a IPv4LL address (169.254.0.0/16) in parallel with the DHCP address received from the server on the same network card. I tried to modify /etc/network/interfaces to that effect (see below), but either I only manage to get one of the two at any time.
auto lo
iface lo inet loopback
auto eth0 eth0:1
iface eth0 inet dhcp
iface eth0:1 inet ipv4ll
View 2 Replies
View Related
Jun 7, 2010
I have a slackware server running ISC dhcpd and bind, and I want to give a dual boot XP / Ubuntu client a fixed address based on its MAC.
I added a host stanza to my server's dhcpd.conf:
Code:
I restarted bind and dhcpd, restarted the client's networking, and it still requests (and receives) its previously leased address, which is not the fixed address I want it to get. I tried dhclient -r to make the client release the old address, didn't help. On networking restart it still gets offered the old (wrong) address. Could it be that dhcpd somehow hangs on to the old lease even after the client sent a DHCPRELEASE?
How do I tell dhcpd to forget about an old lease, and how do I make dhcpd hand out the fixed address (and only that address) I specified for a given MAC, regardless of what the client requests?
View 6 Replies
View Related
Jan 24, 2011
This dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies
View Related
