Networking :: Setup DHCP Server In Redhat 6?
Jul 20, 2011How to set up DHCP server in Redhat Linux 6
View 1 Replies
ADVERTISEMENT
Ubuntu Networking :: Setup A Dhcp Server
May 6, 2011i have a homework where i have to set up a dhcp server on linux. I am using ubuntu. I tried following: [URL] However after running "sudo apt-get install dhcp3-server" the file "/etc/default/dhcp3-server" does not appear.
View 9 Replies View RelatedFedora Networking :: DHCP Server Intitial Setup - FC 13
Jun 5, 2010I decided to forgo my router's DHCP capabilites and try to make a random computer at my home take on the job.
First of all here's my network topology:
I have a cable modem hooked up to eth0 on my linux box, and this is where my internet comes from and works fine.
I also have another ethernet, eth1, which is connected to a wireless router in bridge mode. My end goal is to have my linux box sit between my internal network and the outside world. Thus it will need to act as a DHCP server, a NAT and as a firewall. Right now I'm just focused on the DHCP part.
Here is a copy of my dhcpd.conf file:
My /etc/sysconfig/dhcpd file has:
However the issue is that it is still listening on eth0. and not issuing any leases on my internal network.
What I think is happening is that it's not recognizing the 10.0.1.x subnet because my router is issuing leases on the 169.254.193.x, even though I put it on bridge mode. But I could be totally off mark.
Also running tcpdump on eth1, I can see requests coming in for dhcp, but my server isn't responding to them.
Fedora Networking :: Setup DHCP Server Via Virtual Interface?
Mar 10, 2009is it possible to setup a DHCP server using the loopback or a virtual interface? I installed Sun VirtualBox on my fedora system and want to try and kickstart them from within the same box on a virtual network. Is this possible and has anyone done it? I only have a single NIC in the box and it is on my public network.
View 1 Replies View RelatedServer :: Setup Dhcp Logs In Dhcp Server ?
Jan 24, 2011This dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies View RelatedNetworking :: Redhat Does Not Retry Renewing DHCP Lease More Than Once?
Apr 23, 2010We have 20+ Redhat servers on our network and every so often our DHCP server goes down. When it comes back up we have to go around to all of our RedHat servers and restart networking manually. Other OS's (Ubuntu, Windows, etc..) will continually try to get a DHCP lease so that when our DHCP does come back up it requires no work from us for them to get back on the network. But it seems that Redhat only tries once and if it fails it never tries again. Have to go around to 20 different servers (some of them are at remote locations) is less then ideal when this happens. how we can get Redhat to continually try to get a DHCP lease like other OS's?
View 1 Replies View RelatedUbuntu Networking :: DHCP Server No Longer Responses To DHCP Requests - Can't Ping Gateway
Oct 22, 2010Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Ubuntu Networking :: DHCP Server No Longer Responds To DHCP Requests - Can't Ping Gateway
Jul 1, 2010Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Networking :: Configure A (openSUSE) Client To Dhcp To EBox DHCP Server - Lease An IP Address
Mar 25, 2010I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
Ubuntu Networking :: If DHCP Not Available - Fallback And Start DHCP Server?
Mar 8, 2010Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies View RelatedNetworking :: Setup Firewall In Redhat V5+?
Mar 4, 2009I'm an it student and a newbie in linux OS.
We have this final project that we have to set-up
a firewall in a linux redhat OS which i totally have no idea ..
i did some research but haven't found the right one.
Fedora Servers :: How To Setup The DHCP Server
Aug 1, 2009I have a small office setup all on public ips and was trying to work out the best way to move the wearhouse computers on to private ips and leave offices on public ips I have server with 2 nics and i have two switches What i am after is how to set it up so all computers can still see each other but private can not access net All the office computers via switch 1 Public IPs All the wearhouse computers via switch 2 Private IPs
1 DHCP server
3 Routers from ISPs going to switch one
Both switches going to DHCP Server
Ubuntu Servers :: How To Setup A Dhcp Server
May 30, 2011Ive tried on multiple occasions to setup a dhcp server, but all the google searches return legitimate results it seems, and ill set everything up, except the last few instructions i have to configure /etc/dhcp3/dhcpd.conf and /etc/default/dhcp3-server, but ubuntu says its not there.Im running Ubuntu Server 11.04 and using nano to edit files
View 4 Replies View RelatedServer :: Setup Dhcp With Ip Resume Support?
Jun 1, 2010Is it possible to setup dhcp server in such a way that even if a client disconnects for a short period of time (5 - 10 minutes) the dhcp server keeps that address for that specific client and lease it back. Tracking can be done using the mac address of the client.
View 2 Replies View RelatedServer :: Configure/Setup DHCP, TFTP Servers?
Feb 23, 2010I've tried to configure DRBL server to use Clonezilla and that is required me to setup DHCP, TFTP servers.But I've gotten a lot of errors from them - so please look at my attachments from /var/log/messages and dhcpd.conf - help me to find out what are wrong with them.
[Code]...
Server :: Setup A Net With A Dhcp + Dns Server Using Dnsmasq
May 18, 2010I've set up a very simple net with a dhcp + dns server using dnsmasq. It works but the server itself cant resolv clients names. Clients do resolv without any problem my /etc/dnsmasq.conf
[Code]...
Server :: Squid Access / Setup Automatically Get The Proxy Setting As Dhcp?
Jun 15, 2011I my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,
in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.
is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.
CentOS 5 Networking :: DHCP Work But Not Able To Setup Static IP?
May 26, 2010I am having several boxex with centos on it. No pb. I have recently setup a new box with centos 5.4 and I am not able to get the network working on it when configuring a static ip.I've configured eth0 and dns using "setup": unsuccessfulI've used the network config GUI: unsuccessfulAnd it is working very well when I let the dhcp getting the setting.I need a static IP.Here is the getinfo output when static ip setup, and below it, the getinfo for dhcp setting
== BEGIN uname -rmi ==
2.6.18-194.3.1.el5 i686 i386
== END uname -rmi ==
[code]....
Ubuntu Servers :: Setup A DHCP Server And SAMBA As Windows Domain Controller?
Apr 6, 2010Does anyone have a link to a tutorial on how to set up a DHCP server and SAMBA as a windows domain controller? I can't really find good detailed guides by searching google.
View 2 Replies View RelatedUbuntu Networking :: Xbox 360 Connection Sharing - DHCP Setup
Jun 17, 2011I have a similar problem. My ubuntu box is set up as a dhcp router for my Xbox360, my xbox can get ip and DNS information from the computer, but it doesn't seem to get the right info. The ip address it gets assigned is out of the range I've set in etc/dhcp3/dhcpd.conf.
View 1 Replies View RelatedNetworking :: DHCP Setup For Development Board Connection On Fedora10?
Mar 16, 2011I'm still fairly new to Linux so please forgive me if my description of my problem leaves out important information. My problem is centered around using a AT91SAM9G45 development board (DB)on Fedora 10. I have directions on how to setup on my host machine a DHCP server to connect to the development board. I have installed an additional network card (eth1) that will be used exclusively to communicate with my DB.
The DB has been setup with an ethaddr=12:34:56:78:9a:bc and an ipaddr=192.168.251.191.
The following is info from ifconfig for eth1:
eth1 Link encap:Ethernet HWaddr 00:0A:5E:1A:46:1C
inet addr:192.168.251.190 Bcast:192.168.251.255 Mask:255.255.255.0
inet6 addr: fe80::20a:5eff:fe1a:461c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:38 errors:0 dropped:0 overruns:0 frame:0
[Code]...
Ubuntu Networking :: Find Gateway - DHCP Server - DNS Server From CLI ?
May 27, 2010On a remote system, when all you have is the ssh CLI -
How do you find out the ip addresses for:the Gateway
the DHCP server
the DNS server
Don't need to make any changes.
Which commands will display this info?
Ubuntu Servers :: DHCP Server And DHCP Client Simultaneously?
Aug 4, 2010I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies View RelatedNetworking :: Dhcp Server With Two Subnets?
Mar 17, 2010I'm trying to build a linux(fedora 12) dhcpd server(and gateway), that have 3 network cards(eth0 have with public ip, eth1 192.168.2.1 class and eth3 with 192.168.3.1 class).
Because I have just a switch, I want to put both cables(from eth1, eth2) in the switch. Every client has 2 network card(eth0, eth1). My question is, is there any way to conf eth0 to take from server ip from 192.168.2.1 class, and eth1 from 192.168.3.1? The internet will work only on eth0.
my dhcpd.conf for now looks like this:
subnet 192.168.2.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option routers 192.168.2.1;
[Code]....
Fedora Networking :: Installing Box As DHCP Server?
Jun 19, 2011We have a network of 20 boxes and the router dealt with DHCP, but I'm planning to assign the DHCP task to the linux box. Any heads up? eth card configuration, network topology... etc.?
View 8 Replies View RelatedUbuntu Networking :: Can't Use Static Ip On Dhcp Server
Aug 17, 2010I have 2 Ethernet connections, one (eth0) for the internet which gets set with dhcp, and one (eth1) for my internal network on which I have dhcp3-server running. I set eth1 to use static IP in interfaces, but every time I reset the network, it is fine for a couple of minutes, and switches over do being served by my own dhcp server on the same machine. (the interfaces file clearly says "iface eth1 inet static")
View 7 Replies View RelatedUbuntu Networking :: Server 8.04 - Installer Cannot See A DHCP ?
Dec 13, 2010I reinstalled Ubuntu server, now, as always I have to start off with 8.04 then upgrade to 10.04, and I've never had a problem with this before on this machine or any other for that matter. The problem is, this time I have installed and Ubuntu installer cannot see a DHCP, I go a head and install anyway and fire up Ubuntu and there is no internet access, I have two network cards plugged in, when I type in ifconfig it shows only lo and no network cards, and yet when I check lspci ot shows both network cards are there and when either are plugger in it shows connection on both the connector at the stack end and on the router.
View 5 Replies View RelatedNetworking :: Configure To Use A Specific DHCP Server?
Jan 24, 2010This is probably an odd request, but figured I'd ask in case someone knew. We have a lab that has the IP range 172.10.0.0/16 (255.255.0.0). The lab gateway/DHCP assigns an IP in the range of 172.10.0.2-172.10.0.254. I want to set up my own DHCP server on a specific range, for example 172.10.10.1-172.10.10.254. I create a new host fine, but since it's set for DHCP, it uses the DHCP server at 172.10.0.1. Is there a way to force it to use a different DHCP server on the client side? I realize that I can work around this with exclusions on the 172.10.0.1 DHCP server, or use iptables to deny DHCP requests to specific MACs, but wanted to know if there was an (easier?) way to configure the client to use the 172.10.10.1 DHCP server instead of the 172.10.0.1 server?
View 1 Replies View RelatedNetworking :: DHCP Server Auto-detect
Apr 1, 2010I have a scenario where a Debian (in this case) device will be connected to an existing LAN.What I then want said box to do, is to query the LAN to see if there is an existing DHCP server present. If there isn't one - then simply use the Debian box as the DHCP server (which works fine atm).If there is an existing one - I need the Debian box to be able to turn off it's own internal one and get it's details from the existing server (ie. change from server to client).
These action will need to be sat in the background as well - just in case another DHCP server appears on the LAN after this box does. Don't shoot me for saying it - but I know Windoze server does this. Is there a 'script/util' that anyone knows of (I am trying to do this auto-magically)?
Networking :: Dhcp Server On Network Drive
Jan 15, 2010On my network drive web control panel I have got such an option:What would a dhcp server do on a network hard disk?
View 5 Replies View Related