Server :: Configure The OAuth Module In Ubuntu 9.04?
May 23, 2010
I was trying to configure the OAuth module in ubuntu 9.04, after a while I found some instructions for Fedora and I finally get things working ...
sudo apt-get install liboauth-php
sudo apt-get install libcurl4-gnutls-dev
sudo apt-get install php5-dev
sudo pecl install -R /usr/lib/php5/ oauth-0.99.9
sudo apache2ctl restart
this is what I type, but I don't fully understand it. why do I need to install libcurl dev and php dev? Is there a simpler way to install it or another module in php?
View 4 Replies
ADVERTISEMENT
Sep 1, 2010
Since yesterday we need to have oauth authentication to login to Twitter. I have compiled qoauth and then qwit and choqok but I'm not able to use both. I'm having issues with oauth I could'n solve. Qwit gives this message "Error while trying OAuth!" and Choqok "Authorization Error: Timeout on server".
View 11 Replies
View Related
Jan 25, 2011
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
View 14 Replies
View Related
Feb 16, 2010
I have got a running mail server on CentOS5.4 Final using Zimbra free edition. . Assume that domain is organization.com.local And it is running fine with users created and bugzilla running on the same machine can send mails using this server. But it can obviously send messages to the internal users. There is this option to configure it to use external mail server to send mails outside the network but my external smtp server needs an authentication.Is it possible to configure it this way to use my external server to send mails from internal domain to say gmail?
View 15 Replies
View Related
Jan 8, 2011
i have been trying to complete the following project1) Configure a FTP server where we can upload and download files.........2) server must run at 9 pm & stop at 9 am automatically ............although the first task was easy ,i have no idea how to accomplish the 2nd task(not to mention I'm a new user)
View 5 Replies
View Related
Jan 28, 2010
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
View 1 Replies
View Related
Jun 8, 2010
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
View 2 Replies
View Related
May 18, 2010
Im new in linux i want to configure my redhat machine as both router and transparent proxy!
View 1 Replies
View Related
May 3, 2010
some weeks ago I've installed ubuntu 10.04 beta desktop, in that version the module sg was present using modprobe (the sg.ko file was not present). I need the sg module because of some scsi driver that require it.
Today I've installed the 10.04 server and modprobe sg returns a not found. I would like to install it or make it visible as in the beta version.
View 8 Replies
View Related
Feb 3, 2011
I am trying to get the python GUI working for OpenIPMI on Ubuntu and I can't find the required OpenIPMI python module. where to find this module suitable for Ubuntu 8.04.4 (Lucid)? There are RPMs available for different RedHat flavours but I can't find anything for Ubuntu.
View 2 Replies
View Related
Mar 3, 2011
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies
View Related
Jun 1, 2009
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
View 3 Replies
View Related
Feb 11, 2011
I am running apache httpd-2.2.3-43.el5.centos.3 When i restart the http, it says the following error "Invalid command 'JkSet', perhaps misspelled or defined by a module not included in the server configuration "
Do I need to install anything like tomcat? or include any configuration setting in apache? kernel version: 2.6.18-194.32.1.el5
View 3 Replies
View Related
Apr 22, 2010
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies
View Related
Jun 15, 2011
I have installed the Apache, PHP and MYSQL in the rackspace cloud server environment. Can anyone please guide me How can I configure email server in that with postfix or some other with multiple domain.
View 3 Replies
View Related
Jun 26, 2010
I have a computer running Ubuntu 10.04. I have installed Webmin on it and everything is working fine except for the GRUB module. I wish to know if there is a new GRUB module that supports GRUB 2? It may be beta or an unofficial one.
View 5 Replies
View Related
Nov 5, 2009
I want to add the imap module into my php
View 1 Replies
View Related
Jan 30, 2011
I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
View 3 Replies
View Related
Apr 11, 2010
I got this problem where my USB ports don't work. So if I do the command:
modprobe -r ehci_hcd
it fixes it. I can put it in the /etc/rc.local so that it runs every time when the server reboots. But, I want the ehci module removed without ever being loaded because sometimes the server goes through an fsck and the module is loaded and therefore I cannot use my IPMI to access the server.
I believe that my kernel has it within it because blacklisting the module does not work. I've tried remaking the initrd with this:
add module to /etc/modprobe.d/blacklist
mkinitrd -f /boot/initrd-$(uname-r).img $(uname -r)
and that didn't work. I've searched on how to do it but nothing is really clear. I would like to know what the command would be to do this. I use Fedora 8.
I would like the ehci_hcd module to not be loaded so that if the server goes through an fsck, the module is still not loaded.
View 14 Replies
View Related
Mar 10, 2011
I run a web server using mandriva 2010.2 , I use webmin / virtualmin to facilitate the administration of virtual hosts, I've tried using nginx module for webmin that is in [URL] but for some reason the module could not be used by webmin.
View 4 Replies
View Related
Apr 24, 2011
i need to configure postfix on centos to relay email from the internet to the Exchange Server and i also need that emails sent from the exchange within the same domain be sent to postfix then resent to exchange because i have spamassassin and clamav installed on centos to filter all incoming and outgoing mails ...
View 1 Replies
View Related
Apr 24, 2011
Module xselinux appeared in new versions of XServer theoretically allows to use SELinux in order to improve security. First of all I'm interested in examples of the use of this module (configuration files and what functions it perform). Also interesting to know whether some user's actions with XServer can be restricted via xselinux module (e.g. screenshot prohibition).
View 11 Replies
View Related
May 27, 2010
redirect a domain name with /abc to external ip of web server. Now I can made sure that I should use the rewrite module to achieve this issues. But I don't know how can I enable this function in my apache web server. I will post my httpd.conf for your reference.
View 14 Replies
View Related
Apr 7, 2010
I have CentOS-5.4 box with all updates.I want to use samba as PDC with ldapbackend. All works fine, except winbind daemon. My samba version is 3.4.5.
# winbindd -D -d 3
# wbinfo -i test
test:*:50001:513:test:/home/W3/test:/bin/false
View 4 Replies
View Related
May 13, 2011
I have been able to find enough information that I need to enable 'time-udp' in /etc/xinetd.d/ But there isn't an entry for time-udp. How do I enable time-udp (Time of Day server) on a Red Hat system? It's RHEL 5.6 64bit.
View 1 Replies
View Related
Apr 26, 2010
How to configure linux vpn server for windows clients & roadwarriors connection?
View 4 Replies
View Related
Nov 19, 2010
I tried to install php from source file on centos server and i got the error as # ./configure --with-apxs2=/usr/local/packages/apache/bin/apxs --with-mysql --prefix=/usr/local/packages/apache/php --enable-force-cgi-redirect --disable-cgi --with-zlib --with-gettext --with-gdbm
checking for specified location of the MySQL UNIX socket... no checking for MySQL UNIX socket location... /var/lib/mysql/mysql.sock checking for mysql_close in -lmysqlclient... no checking for mysql_error in -lmysqlclient... no configure: error: mysql configure failed. Please check config.log for more information.
View 6 Replies
View Related
Feb 12, 2009
I have one server at home, connected through a router that gives me a static IP:192.168.1.2 - My PC192.168.1.3 - CentOS serverI enabled the port 80 into router forwarding system and I can connect properly to CentOS server, using the IP my internet provider gives me. My router automatically forwards a changed IP to my dyndns.com account so I can also access the server through a domain name (I pay to have it linked to one of my domains).My next step is to configure the mail server (dovecot) , so I can send emails from my local server(192.168.1.3).I was wondering if anyone has any tutorial links or tips to have the mail server configured through a home internet provider + home router.
View 5 Replies
View Related
May 6, 2010
what is configure option of Mysql server from Centos repo? I mean configuration option used before compilation.
View 1 Replies
View Related
May 5, 2010
My goal is this: Allow a user to connect to a server via SSH with any login name or password without checking to see if that account exists on that server. Their account would be captured by a universal account say, 'generic_user', and then they would be directed to one of my python scripts with the username and password they supplied for initial login. At this point my script would capture their SSHD process ID and allow/deny their existence based upon a MySQL/Subscription check.
The part I'm having trouble with is with PAM and allowing the user to login with any credentials and be successfully authenticated under the generic account. Beyond that, everything is great.
View 2 Replies
View Related
