I am running apache httpd-2.2.3-43.el5.centos.3 When i restart the http, it says the following error "Invalid command 'JkSet', perhaps misspelled or defined by a module not included in the server configuration "
Do I need to install anything like tomcat? or include any configuration setting in apache? kernel version: 2.6.18-194.32.1.el5
I am getting following error "Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration" Saw this thread in /etc/apache2/mods-enabled/ I see
[Code]...
I am getting this error when trying to start apache. This is on a server that was functioning but now, when I tried to restart the server, this error shows up when trying to start the httpd service. The command that is causing the error is: CustomLoglogs/rosewood.access combined However, my guess is that it has something to do with either a module not being loaded or something wrong with the setup. But, as I said, this server was running so I am really not sure what changed. Server is Apache 2.0.52.
View 2 Replies View RelatedI am getting following error "Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration"
Saw this thread in /etc/apache2/mods-enabled/ I see
Code:
alias.conf authz_default.load autoindex.conf deflate.conf
dump_io.load mime.load proxy.conf proxy.load[code]...........
i enabled LDAP authentication for group in apache2.2 is working fine. When i enabled sub group search using AuthLDAPSubGroupDepth 1 is showing error Invalid command 'AuthLDAPSubGroupDepth', perhaps misspelled or defined by a module not included in the server configuration here below the ldap coding for apache2 running in ubuntu 10.04
AuthzLDAPAuthoritative on
AuthType Basic
AuthName "xxxxx"
AuthBasicProvider ldap
AuthLDAPSubGroupDepth 1
[Code]...
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
My question is rather simple, but i couldn`t find any answer yet i have a debian box connected to the internet through an ad-hoc wireless connection with a win7 box.Could I run a http server on the linux box and access it from the "outside" somehow, since my linux box has a "private network" type IP, ie: 192.168.137.12 ?
View 5 Replies View RelatedApache is complaining about an error with SetEnvIfNoCase when I tried to start it. I've checked that the module /usr/local/apache2/modules/mod_rewrite.so exists. Also the 2nd code block below shows that I'm using the <IfModule rewrite_module></IfModule> tags so if the module isn't available, Apache shouldn't have read that part of the file. The fact that it's reading inside that tag pair means it's able to load the mod_rewrite.so DSO.
Code:
[root@test httpd-2.2.19]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: Syntax error on line 203 of /usr/local/apache2/conf/httpd.conf:
Invalid command 'SetEnvIfNoCase', perhaps misspelled or defined by a module not included in the server configuration
[Code]...
I compiled a fresh install of httpd on a new linux box, added a virtual hosts entry for an https site, but when I try to start apache I get the error:
Code:
Invalid command 'SSLEngine', perhaps misspelled or defined by a module not included in the server configuration Is this because I don't have mod_ssl compiled in?
How to best manage both http and https pages on the same apache-server without conflicts. For example, if i have both 000-default.conf and 000-default-ssl.conf pointing to mydomain.com, and don't want users who visit mydomain.com without specifically type the https-prefix to be redirected to the https-page - how to handle users using browserplugins such as https-everywhere etc?
Another option would be to create a subdomain ssl.mudomain.com and have users who want to reach the ssl site to have to type ssl. I have tested several things with https everywhere enabled in my own browser, and it seems really hard to make this working the way i want, in one way or another i always end up getting redirected to the ssl-site automatically.
The reason i need this to work is because i run one site that i don't care much about SSL, that is the "official" part of that site, and i also host some things for friends and family on the SSL-part. This would not have been a problem if it wasn't that i use self-signed certificates for my ssl-site and the major user become afraid when a certificate-warning pops up in their browser and therefor leave the site.
i am using fc9 server i installed Apache web-server i kept some datafile in my html folder when tried to download remotely through web i can download the file tried to get the file in remotely through wget command i am unable to get the fileor is failed: Connection timed out Retrying below the steps i tried it
my target file is http://X.X.X.X/test.zip
wget -T 0 http://X.X.X.X/test.zip
wget http://X.X.X.X/test.zip
[code]...
I keep getting this error whenever I try to update or reload. Does anyone know how to get rid of this or fix it?
GPG error: http://repository.cairo-dock.org karmic Release: The following signatures were invalid: NODATA 1 NODATA 2Failed to fetch http://repository.cairo-dock.org/ubu...6/Packages.bz2 Sub-process /bin/bzip2 returned an error code (2)
I need to change the some configuration in httpd.conf file with out affect any current status of http service.
View 3 Replies View RelatedJust setup an Apache2 server, and I would like to setup a login. I also wanted to use the same method that is setup for vsftpd For vsftpd I've created a mysql database.... structured as:
Code:
mysql> use vsftpd
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> describe accounts;
[Code]...
I successfully built the sources for 64 bit linux drivers from [URL].... on the 64 bit F14 machine: Linux localhost.localdomain 2.6.35.6-45.fc14.x86_64 #1 SMP Mon Oct 18 23:57:44 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux and got wl.ko:
[Code]...
We are using LPC3250 ARM9 and LTIB for building the Linux 2.6.27.8 We have written some code to access GPIO and was working earlier with opensuse 9.0 We now have fedora 11 32 bit 2.6.30.10-105.2.23.fc11.i686.PAE When we make the program we get following errors we are using GCC3.4.5
#make -C /lib/modules/`uname -r`/build M=`pwd` modules
make -C /home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8 M=`pwd` modules
make[1]: Entering directory
`/home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8'
CC [M] /home/shekhar/samsung_lcd/gpio/char.o
cc1: error: invalid option `64'
[code]....
i'm runung "ubuntu 10.4" and install "Xampp 1.7.3.a" i have 3 problem in the joomla web installer in step "2:Pre-installation Check"
Code: configuration.php Writable NO
in step 5 : FTP Configuration when i feel ftp setting and click on "verify ftp setting,get this error Code: Error: the XML response that was returned from the server is invalid.
inthe final step when i click "install sample data" i get this error
Code:
Error: the XML response that was returned from the server is invalid.
I had a RAID controller in a system that would not load Virtuozzo. So I deleted the array created by the 3Ware 9550SX controller before removing it and one drive from the CentOS 4.8 server. Even though I deleted the array when the server boots it shows an error:
ERROR : asr : invalid RAID config table
How can I clear and remove the table without having to reload the OS? Can I? Di I need to run the Seagate Tools and reset the drive?
M trying to install sendmail server on rhel6.i am having problem in setting up openldap.
following is slapd.conf
#
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
#
include/etc/openldap/schema/corba.schema
include/etc/openldap/schema/core.schema
code....
but if i try to change ldap password it gives
ldap_bind: Invalid credentials (49) error
i was successfully able to restore my ldif file from old rhel 5.3 server on to rhel 6
What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies View Relatedi installed SLES 11 sp1 as guest on openSUSE 11.3 host, then change the adapter network from 'NAT' to 'Bridged Adapter', but when i hit start i got this error message: Failed to open a session for the virtual machine sles. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). Failed to attach the network LUN (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). but when run: sudo /etc/init.d/vboxdrv setup
[Code]....
I've been running a SuseStudio-built VM for a few weeks with no issues. I built a new one recently, and now I can't configure a new vhost in Apache using the http-server module. It gives me this error. Screen shot 2010-11-06 at 11.42.24 AM.png. Why YaST suddenly decided that my hostnames aren't valid?
View 1 Replies View RelatedI using rhel5 i installed&configured nagios ofter loged in the nagios server when i m enter hosts & services i m getting this error # it appears as though you do not have permission to view information for any of the hosts you requested. If you believe this is an error, check the HTTP server authentication requirements for accessing this CGI and check the authorization options in your CGI configuration file.
View 9 Replies View Relatedhow do i able to allow some users that are able to create content in directory of http server. For example: i have configured a web server which have default document root /var/www/html, now i want to extend my web server through virtual hosting , i have enable virtual hosting, but i want that user sumit is able to create content in /var/www/html/secret. which is the document root for my virtual site?
View 5 Replies View RelatedIam using centos5.i had installed qmail as MTA.when iam login through squirrel mail it gives login error invalid username or password.And then i tried with domain.
View 2 Replies View RelatedI installed Nagios on my Ubuntu 10.04 server using apt-get and when I accessed the web console, everything was OK. I made some changes to apache (creating some new virtual sites) and since then Nagios gives me a warning message for HTTP with the message, HTTP WARNING: HTTP/1.1 404 Not Found. The sites that I created are working perfectly. I noticed that the attemps are 4/4. Does this need to be reset or does Nagios automatically reset that once it detects the issue is resolved?
View 1 Replies View RelatedI have a problem with loading the powersaving kernel module p4-clockmod.ko. When I try inserting the module (via modprobe or insmod) I get FATAL: Error inserting p4_clockmod (/lib/modules/2.6.31.8-mediaserver/extra/p4-clockmod.ko): Invalid module format The module has been compiled together with the kernel. Other modules load with no problem at all. I've tried recompiling the kernel (after re-installing the sources, make xconfig from scratch) - no avail. There's only one kernel source package installed. Searching the forum and google didn't yield a helping answer.
View 9 Replies View RelatedIn oreder to run an application software on RHEL 3 ES server, I created a link forcefully using following command from root id:
# cd /lib64/tls/
# ln -sf libc-2.3.4.so libc.so.6
before that I copied file libc-2.3.4.so from a workstation with OS RHEL 4 WS so that a link can be created.
Now I am unable to run any command except cd & pwd and it gives error messaage as given below:
ls:relocation error:/lib64/tls/libc.so.6:symbol _rtld_global_ro,version GLIBC_PRIVATE not defined in file ld-linux-x86-64.so.2with link time reference.
Before running this command libc.so.6 was pointing to libc-2.3.so file in path /lib64/libc-2.3.2.so.
I am now unable even to open a new window on the server.Please send me some solution as early as possible because this server is running production data and many users are runnig application on this server.
I'm having some troubles with nfsd in slackware-current. When I start the service, I get the following error messages: Quote:
WARNING: Error inserting sunrpc (/lib/modules/2.6.33-smp/kernel/net/sunrpc/sunrpc.ko): Invalid module format
WARNING: Error inserting auth_rpcgss (/lib/modules/2.6.33-smp/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko): Invalid module format
WARNING: Error inserting lockd (/lib/modules/2.6.33-smp/kernel/fs/lockd/lockd.ko): Invalid module format
FATAL: Error inserting nfsd (/lib/modules/2.6.33-smp/kernel/fs/nfsd/nfsd.ko): Invalid module format
The mount fails from the clients with the error message: Quote: mount.nfs: access denied by server while mounting jupiter:/media/Backup A look at syslog from the server side gives: Quote: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel) mountd[28198]: getfh failed: No such device kernel: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel)
We're having an issue with HTTP POST file uploads on our two Ubuntu PCs. For some reason, whenever one of our users attempts to submit a file in an HTML form, the request times out, usually with a 500 Internal Server Error message. This problem is not limited to one site, but occurs on all sites that use file uploads. Also, the problem does not appear to be with our network, as a Windows 7 PC on the same network can upload files to the same sites without any difficulties. The problem is not browser-specific; we have tested with Firefox, Epiphany, and Google Chrome and all produce the same results. The issue is relatively new, and was first observed within the last month; before this time, both machines had no problems uploading files.
Does anyone have ANY idea what could be causing this? I've tried a number of things, including rebooting the PCs, rebooting the network, disabling IPv6, etc. I'm not very experienced in Linux system administration, but I can use the terminal and am familiar with some terminal-based diagnostic tools, so if you need any additional info or want me to try something, please let me know! I've exhausted my own computer knowledge with regards to finding a solution to this problem.
