Server :: How To Permanently Remove A Module From Kernel

Apr 11, 2010

I got this problem where my USB ports don't work. So if I do the command:

modprobe -r ehci_hcd

it fixes it. I can put it in the /etc/rc.local so that it runs every time when the server reboots. But, I want the ehci module removed without ever being loaded because sometimes the server goes through an fsck and the module is loaded and therefore I cannot use my IPMI to access the server.

I believe that my kernel has it within it because blacklisting the module does not work. I've tried remaking the initrd with this:

add module to /etc/modprobe.d/blacklist
mkinitrd -f /boot/initrd-$(uname-r).img $(uname -r)

and that didn't work. I've searched on how to do it but nothing is really clear. I would like to know what the command would be to do this. I use Fedora 8.

I would like the ehci_hcd module to not be loaded so that if the server goes through an fsck, the module is still not loaded.

View 14 Replies


ADVERTISEMENT

General :: Remove A Module Permanently?

Jun 13, 2010

I am a newbie and I am compiling a kernel in order to reduce the bootup time. I have a question as follows.

I am trying to remove a module. I used rmmod and modprobe. I can remove the module, but it is loaded again after reboot. How can I remove a module permanently? The module that I am trying to remove is lp.

View 5 Replies View Related

Ubuntu :: Remove A Module From Kernel?

Mar 7, 2011

I have inserted a module with modprobe. However it seems to have problem.
1- How can I remove the module from modprobe?
2- If I reboot and the kernel can not boot up because of this faulty module, how can I remove it?

View 4 Replies View Related

General :: Adding A New Kernel Module To Wireless Driver Module?

Apr 22, 2010

I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.

View 2 Replies View Related

OpenSUSE Install :: OS 11.3 RC2 - Disable Nouvou Module Permanently; Use Propietary NVidia Drivers?

Jul 5, 2010

I have compiled the proprietary nvidia drivers for 11.3. When I boot, even using the nomodeset boot option, the nouveau module still loads, causing gdm/X to fail. I am able to manually remove the modules with rmmod and restart gdm. Everything then works normally. I have added the line "blacklist nouveau" to both 50-blacklist.conf and 99-local.conf in /etc/modprobe.d

View 7 Replies View Related

General :: Install Module U32 Into The Netfilter Module For Kernel 2.6.27

Jan 30, 2011

I need to install module u32 into the netfilter module for kernel 2.6.27.

I did not see the source code in the kernel version I have. where can I find the code for U32 module.

I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?

I building the kernel for a MIPS processor.

View 3 Replies View Related

Fedora :: Remove The Deleted File Permanently?

Nov 19, 2009

I am using fedora 6 and i have delete same file from home partition and i want to remove these deleted file permanently. so, nobody able to recover these file.

View 10 Replies View Related

Debian Multimedia :: Permanently Remove Gtk-3.0 Folder In Wheezy?

Sep 1, 2011

There is a folder in my home titled 'gtk-3.0,' which continues to reappear even after I have deleted it. The reappearance of the folder seems to occur after using lxappearance to change the themes. I will not be participating in the headaches of the switch from gtk2 to gtk3, just as I did not participate in the headaches of the switch from KDE 3 to 4. So the following are my questions;1. Is it possible to permanently delete the gtk-3.0 folder so that it can not ever reappear in my home? (And why is it appearing there anyway? Shouldn't it be hidden with a dot?)2. If I can not prevent this folder from appearing in my home, is there a setting I can use in Wheezy to block gtk3 libs and apps from installation? Presently, the only gtk3 lib or app shown by aptitude search is libcanberra-gtk3-0, but I can't remove it due to notification-daemon dependencies.3. If I switch from all gtk2 apps to all KDE apps will that solve the problem of gtk3 placing a completely unnecessary folder in my home?

View 2 Replies View Related

OpenSUSE Network :: How To Force Remove Application Permanently

Jul 30, 2010

I have installed freeswitch app from opensuse 11.2 repositories. App got broken during the process/setup.., I have removed it (yast) ignoring some of it's dependencies, also I have removed folder /opt/freeswitch manually. In Yast it shows that app is still installed.. when trying to remove it, there is an error, force remove also out puts an error. "whereis" command shows no file, I was also trying to force install it one more time but it fails. Is there a was to delete it permanently?

View 3 Replies View Related

CentOS 5 :: Permanently Remove Drive From Md Array (RAID1)

May 14, 2011

I installed a distro based on CentOS 5.5 (FreePBX distro FYI). It used an automated kickstart script to create an md RAID1 array of all the hard drives connected to the machine. Well, I installed from a thumb drive, which the script in interpreted as a hard drive and thus included in the array. So, I ended up with three md arrays (boot, swap, data) that included the thumb drive. Even better, it used the thumb drive for grub boot so I couldn't start up without it. I was able to mark the USB drive as 'failed' and remove from each array, and even change grub around to boot without the usb drive, but now each of the arrays is marked as degraded:

[Code]...

View 1 Replies View Related

Fedora :: Permanently Remove Package From Update Check List?

Sep 13, 2009

I m using pidgin2.5.5-1 that is old version of pidgin because of some proxy issue, I dont want to update it anymore but it keeps on showing its update in package updater its very annoying...How could i get rid of it ?I want package updater show all updates except this...that is permanently remove it from update check list.

View 2 Replies View Related

CentOS 5 :: Create New RAM Image File To Get Server Load Raid1 Module Upon Start - Mkinited Error No Kernel Available For 'inited-2.6.18-128.el5"

Nov 12, 2009

I'm trying to create new RAM image file to get my server load raid1 module upon start, I was following redhat documentation & it suggested to use the following command mkinited --with=raid1 inited-raid1-$(uname -r).img $(uname -r) However after running this command I'm getting this message No Kernel available for 'inited-2.6.18-128.el5"

View 4 Replies View Related

Ubuntu Installation :: Remove Windows Xp Permanently From A Dual Boot System?

Sep 9, 2010

make ubuntu as my default OS by removing windows. I formated windows drive and removed all the programs associated with it. I just want to remove the boot menu too... whenever I switch on my laptop, I need Ubuntu to come up without any prior selection.

View 1 Replies View Related

OpenSUSE :: Kernel Module / Building VirtualBox Guest Additions Kernel Modules - Failed?

Feb 10, 2010

I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying

Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)

How should i go about to let my system build kernel modules?

View 7 Replies View Related

Debian Configuration :: Nvidia Kernel Module With Custom Kernel

Jan 24, 2010

I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.

View 2 Replies View Related

Ubuntu :: VirtualBox Kernel Module Breaks After Each Kernel Update?

Jan 6, 2010

I'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.

View 2 Replies View Related

General :: Getting Error "invalid Module Format" And "insert Kernel Module" / What Is This?

Feb 22, 2010

What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?

View 8 Replies View Related

Ubuntu :: How To Remove Floppy Module

May 26, 2010

I disabled it in the BIOS and tried to remove it in the safe mode but that bloody thing is back everytime I log in

View 5 Replies View Related

Ubuntu :: Any Way Can Remove Module Using A LiveCD?

Sep 13, 2010

I recently added the eth1394 module to the kernel using the modprobe command. Unfortunately the computer crashed almost instantly and now crashes on every boot.Is there any way I can remove this module using a LiveCD?

View 2 Replies View Related

Ubuntu :: Thunderbird 3.0.x - Permanently Remove "Message Pane"?

Jun 10, 2010

Even if I minimize it by sliding it to the bottom or hit F8 and close with " File - Quit" that stupid thing keeps appearing and I again have to hit F8 every time.

View 7 Replies View Related

Ubuntu Multimedia :: Remove Video Driver Module For VESA

Sep 16, 2010

I'm trying to remove 3Dlabs / Oxygen gmx , and install vesa - Generic VESA-compliant video driver module.How do I remove 3Dlabs / Oxygen gmx ?I can click on VESA in the 'Choose By Name...' , but when I close that box, it shows No Driver.

View 4 Replies View Related

Server :: How To Permanently Set Shmmax

Jun 10, 2010

For Oracle installation, I need to set kernel.shmmax parameter to 8416559104

According to the manual I did the following:

Code:

when I check the value
Code:

It looks OK, but after reboot there is the default value 3294967296 again.

The system is 64-bit SLES11.

View 3 Replies View Related

Debian Configuration :: Add New AMD PCI-IDs To Kernel Module

Jul 9, 2015

I recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.

Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h

From the 4.1rc1 kernel I know what to patch and where.

Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?

View 6 Replies View Related

OpenSUSE :: Can't Get Vbox Kernel Module

Nov 9, 2010

I have been trying to run my vmachines in virtualbox with no success so I decided to install upgraded packages for upgraded kernel, this means to install them from Virtualization-kernel-HEAD repo.The error is about that known issue where the kernel module can't start.

View 3 Replies View Related

General :: See Which Device Uses Which Kernel Module?

Aug 18, 2010

I have a Samsung phone GT-B3210. For some time I was unable to find working Windows drivers for it. I eventually gave up looking. Then one time I was charging phone over its USB port and booted Ubuntu and was pleasantly surprised when I saw phone's μSD card reader on my desktop. I now need to switch to Gento and would like to be able to work with phone there too. Lsusb tells me it's detected as Bus 007 Device 006: ID 04e8:663f Samsung Electronics Co., Ltd SGH-E720/SGH-E840but lsmod wasn't very helpful. On the list of loaded modules, I wasn't able to find one which looks like it's related to the phone.

View 1 Replies View Related

Fedora :: How To Set Kernel Module Options In 12

Mar 23, 2010

The problem I'm facing is that I can't use my headphone. Sound works, but not the headphone. See my ealier thread. It was suggested to edit the module options, but I don't quite know which buttons to push.

View 6 Replies View Related

General :: Disable Ssh Server Permanently?

Mar 7, 2011

Now i want to disable my ssh server "permanently",which means it won't run unless i start it after i login.that is,it is disabled at boot time by default.
i have asked a similar question before,but i still have some confusions.
Say that now the ssh server is running.my system is ubuntu 10.04. code...

The disable|enable API is not stable and might change in the future.
the shell gives me a warning:do not match LSB Default-Start values,this API is not stable and ...
what does this mean? still it can't disable the server "permanently",ethier.
what on earth should i do to solve this?

View 13 Replies View Related

Debian :: Rebuild Kernel-included Module?

Jun 7, 2010

my wireless doggle is not suppoerted out of box on squeeze.It's based on zd1211rw,just lack the vendor and product id.how can I hack the source and rebuild the driver module?

View 1 Replies View Related

Debian :: Failed To Load Kernel Module

Jun 23, 2015

I'vd a problem with loading modules. Booting gives the this error:

Code: Select alllucas@debian8-1:~$ systemctl --failed
  UNIT                         LOAD   ACTIVE SUB    DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

[Code] ....

Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.

I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.

I've reinstalled Debian 8 several times. Still, both errors stay.

The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.

View 12 Replies View Related

Debian :: Compiling XIllybus Kernel Module

Sep 25, 2015

I'm having problems to compile XIllybus kernel module. As this guide explains, [URL] ..... (on the top of page 8 of 25) I unpackaged the tar.gz file and compiled the kernel module by typing the make command in the proper path. When I compile the module with make command, I get the following error:

make -C /lib/modules/3.16.0-0.bpo.4-amd64/build SUBDIRS=/home/xillybus/module modules
make: *** /lib/modules/3.16.0-0.bpo.4-amd64/build: No such file or directory. Stop.
make: *** [default] Error 2

/lib/modules/3.16.0-0.bpo.4-amd64/build path does not exist. What does it mean? Should I have to install some kernel packet? www does not work for me.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved