i have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap
here is my config file on ldap client (i am not sure if it is the right place though)
ip : 192.168.1.183 is master ldap
ip : 192.168.1.185 is slave ldap
pico /etc/ldap/ldap.conf
#
# LDAP Defaults
code....
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all
This part by itself works for the LDAP authentication:
Code:
AuthName "System Admins"
AuthLDAPURL "ldaps://example.com/ou=ldap,o=example.com?mail" SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,o=example.com
This part works by itself for guest access:
Code:
Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
i have configured ldapserver on rhel4 for creating address book
following are configuration files on ldap server
/etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.
but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"
also when i configured address book on mozilla on server., it is working fine.but not working on another machine.is any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.
how to make a new Ubuntu 9.10 box use our LDAP/Samba server for user authentication. Our Red Hat and Windows machines all use it just fine. I've been trying to use the auth-client-config and libnss-ldap packages for this purpose, but I must be missing something. I'm pretty green with LDAP, so this is my first time diving in... Is there a good How-To or step-by-step read on this? All of my searches lead me to setting up Ubuntu as the server, and that isn't what I want. I've also tried the steps listed in [URL] for the LDAP Authentication section.
View 1 Replies View RelatedJust installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
OS :: Debian Lennyldap :: Openldap (newest one/get from apt-get)replication :: yes (on different machine)secure :: yes (tls)hi there i got problem on slave ldapwhat i am trying to do now is to have machine authenticate at slave ldapwhen master ldap die. So i stop slapd service at master ldap and try to authen. As a result of it, the prompt for login appears to fill in username but with the correct password couldn't make login successfully. I have checked at log file but there is any authen log of that login I wonder if it doesn't direct authen to slave ldap server. Here is my client config ::
#
# LDAP Defaults
#
[code]....
why i can't login on the ldap-client via ldap, so here is a short description of my machines (i use openvz virtualising)I have on the HN (Debian Lenny) 2 VE's, which are in the same subnet (192.168.1.0/24)The first VE (Hostname: ldap1, IP: 192.168.1.91) is the ldap-server, which is so configured, that i can manage the server via phpldapadmin.The second VE (Hostname: ftp1, IP: 192.168.1.31) is the ldap-client, there should run a sftp-server in the future and the sftp-server(ssh-server) should use ldap-usernames to login. on the ftp1, i get with this command getent passwd the users configured on the ldap-server, but with the command id USERNAME the result is, that the user doesn't exist. (USERNAME is this name, i get returned by getent) and if i try to login via ssh, i get permission denied. and because the machines are openvz-virtual-machines, so i can't login on them like on a normal system, but a su USERNAME doesn't work too, because the user is not known on the system.
my installation:
i don't think, that the ldap-server is the problem, because the phpldapadmin and getent on ftp1 are working perfectly, but if you want, i can post the config here too. the VE ftp1 was configured with the following how-to: [URL] and pam is configured like in the chapter "PAM setup with pam_ldap" on [URL]
I've setup an Ubuntu 10.10 LDAP Client to authenticate off my LDAP server. I've install the following: sudo apt-get install libpam-ldap libnss-ldap nss-updatedb libnss-db nscd ldap-utils pam_ccreds Here's my /etc/nsswitch.conf: passwd: files ldap [NOTFOUND=return] db group: files ldap [NOTFOUND=return] db
[Code]...
I have a openldap server running on one machine (fedora10) and pam_ldap.so and nss_ldap.so running on the other machine.
I have added a new user to the LDAP server database, this user is not created on client machine.
1. Can i login to the client machine using this new user?
2. Now if i try logging with this new user I am getting error messages, the error messages are as follows at client side
Sep 2 10:34:36 localhost sshd[8484]: Invalid user kim from 10.254.194.148
Sep 2 10:34:36 localhost sshd[8485]: input_userauth_request: invalid user kim
Sep 2 10:35:16 localhost sshd[8484]: pam_ldap: error trying to bind as user "cn=min soo,ou=people,dc=samsung,dc=com" (Invalid credentials)
[Code]....
we have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
I installed Nconf software on a Debian server.I am trying to configure Nconf Authentication with LDAP.I edited nconf's authentication.php file accordingly and I installed php5-ldap package.When i enter user-name and password in Nconf's login screen.
View 1 Replies View RelatedI want to ask how many applications can we use with LDAP authentication
View 1 Replies View RelatedI'm trying to set up a Linux server and I am new to this. I have gone through most of the configuration using SAMBA 3.0 and when I populate the ldap directory all I get this error before the password request:
Then when I perform an ldapsearch to see if the directory is populated I get this message:
I'm positive all my .conf files are done right.
I'm checking with a sniffer and there's activity going on between the client and the LDAP server... as a matter of fact, the sniffer shows that the search is producing one ldap item, however, php says it can't contact the ldap server (after it has bound and everything):
The script is working beautifully on another host with debian.
I have Centos ( and Postfix+ldap+dovecot ) TLS works with Postfix and LDAP. When I open evolution mail client I can browse ldap tree and search for users, send-receive mails ...all fine
View 3 Replies View RelatedInstall and configure Samba as a primary domain controller with LDAP on Linux.i setup it step by step following article without error until step 10.i want to join windows client when press user name and password for domain then display message:The following error occurred attempting to join the domain BIGTIME:
The network path was not found.
I'm having a pretty weird problem, and really have no idea where to begin in tracing and fixing it. But here goes.I'm running Ubuntu 10.10 on 2 machines, and have installed OpenLDAP as per the guide https://help.ubuntu.com/10.10/server...ap-server.html it all seemed to be going well having it installed and running on Server A, including authentication. So a few days later I decided to setup server B to be a slave replica. Which after a little bit of fiddling seems to working and keeping the records in sync.
Then I did an apt-get upgrade on server A. then my problem started.Basically getent passwd, only returns one entry from the LDAP and so does getent group.But a search of LDAP returns everything that's there.I've been comparing the config files between Server A and Server A for PAM etc, and everything is the same.but if I change ldap.conf on server A to point the uri ldap://server B/ and rerun getent passwd it returns all the users and getent group returns all the groups.I've compared the LDAP entries between Server A and Server B and they're staying in sync.It looks like it's more to do with ldap than the auth config if just changing the server fixes it, but as server A is the master LDAP server I'm really at a loss.
If getent was only returning local users it'd be something, but it's returning local + 1 LDAP user or 1 group. Which just seems weird.Any help would be greatly appreciated. I'm sure posting some logs would be helpful, but I have no idea which so if someone can let me know what extra info would be more helpful I'll post it back asap.
I started a new job and they use LDAP here. I built a new RHEL 5.5 server and configured LDAP. Usernames are recognized but the password is not. I can chown a file to a user name but when I try to login as the user it won't accept the password.I know the password is correct because I can login to any of the old boxes and it accepts the password. I ran authconfig-tui to tell my RHEL box to authenticate to ldap.
View 1 Replies View RelatedMaking a Samba Server with LDAP authentication. Will post as I go along. Found these sources, anything/hiccups I should know before jumping in? Figure would follow the official documentation then check the others for comparative errors.
https://help.ubuntu.com/10.04/server...ap-server.html
https://help.ubuntu.com/10.04/server...amba-ldap.html
http://tuxnetworks.blogspot.com/2010...cid-short.html
Also Do other computers that want access to server also need samba installed (or just client)?
The server is 10.04 and my proposed client is 10.10, does this create problems?
Do I need to use ACL? I see them only in certain places.
Using xfce after Ubuntu install, not sure if this matters.
I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
I am facing problem in adding new users in ldap server and client for a long time. I configure ldap server and client successfully and I can login the client machine by a user. User is created on server during configuring the server but after same time when I create a new user on server and create a home dir for the same user on client machine and assign 700 permission on home dir of same user and copy the /etc/skel/.* /home/user-dir and when run the command "#chown -R user:users /home/user" it shows invalid user error.
View 1 Replies View Relatedcan anyone tell me what is the difference between these two files of LDAP client /etc/ldap.conf and /etc/ldap/ldap.conf and for what purposes these two files gives services. Is it necessary to have these two files at a time ?
I use these files to install LDAP client to authenticate with our LDAP server by creating a symbolic link of /etc/ldap.conf to /etc/ldap/ldap.conf.
I have a server and a few clients set up with LDAP and NFS. All user files and logins are on the server, and I can login as a normal user on any client and get to my files. However, if I log in as root on a client, I can't write in root-owned directories on the NFS. I suppose that client-root and server-root are different.
Question: is there some way to convince the LDAP or that client-root and server-root are the same?
I am getting a problem that whenever I loged in with my ldap user on a ldap client and try to change the password of ldap user it doesn't allow me to do so...
azizf@pc:~$ passwd
passwd: User not known to the underlying authentication module
passwd: password unchanged
azizf@pc:~$
[Code]..
I want to Configure Linux LDAP Server for user authentication when my users want to connect to the internet.Also i don't want the user to get the home directory on server. i configured ldap server and ldap client without PAM & SASL.and now with perl i can search in ldap for my client's username & password in ldap.
View 1 Replies View Related(This was posted at the end of another thread, where it probably didn't belong, so reposting here)I have Active Directory set up on one machine (and I can't really adjust the settings very much) and Ubuntu Server 10.04, which I would like to use as a client.I followed the directions at https://help.ubuntu.com/community/LD...Authentication, but when I get to
Code:
getent passwd
I don't see anything from the LDAP, and ssh'ing into the box from an LDAP/AD username certainly doesn't work.
In addition, I've attempted to use Webmin's LDAP Configuration module to configure it. I can connect to the server and can browse it with the LDAP browser with my settings, but the Webmin package doesn't recognize the users (which are organized in one of four Organizational Units (OUs) within the OU that I have as my Search Base) as users,
I have configured LDAP Server on RHEL 5.2 successfully and client can login to the server. But I do no how a client can change its LDAP password on his client machine.
View 5 Replies View RelatedI am using LDAP to manage the autofs and everything works fine. I have a situation here that I can't figure out how to do. I need to use 2 direct map in auto.master, but the LDAP service doesn't allow me to add 2 "cn: /-" entries in the directory.
The following is my auto.master map:
dn: ou=auto.master,ou=autofs,ou=dolphin,dc=example,dc= com,dc=my
objectClass: automountMap
objectClass: top
ou: auto.master
dn: cn=/-,ou=auto.master,ou=autofs,ou=dolphin,dc=example,dc =com,dc=my
objectClass: automount
objectClass: top
automountInformation: ldap://ldap.example.com.my/ou=auto.iso.indirect,ou=autofs,ou=dolphin,dc=examp le,dc=com,dc=my
cn: /-
I have another ldap entry auto.data.indirect but I have no idea how to inject it into the directory. Any ideas how to implement it? I am using Fedora 13.
I had a machine that is using ldap, but need to remove it completely.I edited the /etc/nsswitch.conf and removed all references of ldapand renamed /etc/ldap.conf to /etc/ldap.conf.bakI can log in as root, but cannot log in as any user in /etc/passwdIn the /var/log it shows pam_ldap: missing file "/etc/ldap.conf"I am guessing I am missing something else?I never set this machine up for ldap, was here when i got here, so not sure of steps to even put ldap on.
View 2 Replies View RelatedDoes winbindd must run on linux box client on network with samba ldap server configured as PDC.
View 5 Replies View Related