Server :: RHEL, And LDAP Authentication, Username Yes, Password No?
Jan 10, 2011
I started a new job and they use LDAP here. I built a new RHEL 5.5 server and configured LDAP. Usernames are recognized but the password is not. I can chown a file to a user name but when I try to login as the user it won't accept the password.I know the password is correct because I can login to any of the old boxes and it accepts the password. I ran authconfig-tui to tell my RHEL box to authenticate to ldap.
View 1 Replies
ADVERTISEMENT
May 13, 2010
I have set it up, but I'm not sure whether the admin username and password are set correctly. How do I confirm? Also, if someone has any links explaining the format of an LDIF file.
View 8 Replies
View Related
Jul 7, 2010
I need to host a user directory and home directors on a Ubuntu 10.04 box. I've installed openLDAP and I can connect a mac to it. how to install the mac schema or add users etc to it. I can view the directory in Workgroup Manager on Mac OS X Server but I also dont know how to set the admin username or password.
View 5 Replies
View Related
Apr 5, 2010
i have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap
here is my config file on ldap client (i am not sure if it is the right place though)
ip : 192.168.1.183 is master ldap
ip : 192.168.1.185 is slave ldap
pico /etc/ldap/ldap.conf
#
# LDAP Defaults
code....
View 11 Replies
View Related
May 25, 2011
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all
This part by itself works for the LDAP authentication:
Code:
AuthName "System Admins"
AuthLDAPURL "ldaps://example.com/ou=ldap,o=example.com?mail" SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,o=example.com
This part works by itself for guest access:
Code:
Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
View 1 Replies
View Related
Sep 24, 2010
Im using opennms network configuration backup server called 'RANCID'.It run on top of RHEL5 system and using APache. Here's the link which i'm accessing [URL] But any one can access this URL and obtain my configuration files
I want to secure this using a logon page.allow login Only for the successful authentications by entering the predefined username and password But after get authenticate book marking the above URL still can access anyone since it didnt prompt username and password again In eachtime executing the above url it should direct to authenticate page
View 5 Replies
View Related
Feb 8, 2010
Something has gone awry with my login. After the usual username/password prompt my laptop comes up with smart card authentication & I can't login. How do I get away from the graphical login so I can login & correct the problem?
View 3 Replies
View Related
Feb 10, 2010
I maintain a samba PDC for a small business, our current setup does not work very well; on a hardware upgrade I directled imported the old ldap database and attempting to add machines to the domain causes all sorts of trouble.
I'm 95% sure the original database (which predates my employment) was created using the idealx smb-ldap tools, unfortunately on our current platform (debian lenny) these tools seem to be broken; the only things hey seem to do reliably are set passwords and add posix users, asking them to do anything involving samba/windows causes errors. The idealx tools seem to be abandoned, and I don't know enough perl to try and fix them.
Since the idealx scripts seem to be abandoned, and most of the good samba+ldap how-tos references the idealx tools, I was wondering what people use nowadays to manage there ldap directories; surely they aren't importing .ldif files to add new users/machines like I've been doing. Are people just writing thier own management scripts/web-apps? Or are the smb=ldap tools just broke on debian?how to generate the NT/LM password hashes and proper SIDs, does anybody have anything they could point me to about this?
View 1 Replies
View Related
Dec 9, 2010
I installed Nconf software on a Debian server.I am trying to configure Nconf Authentication with LDAP.I edited nconf's authentication.php file accordingly and I installed php5-ldap package.When i enter user-name and password in Nconf's login screen.
View 1 Replies
View Related
Feb 9, 2011
I want to ask how many applications can we use with LDAP authentication
View 1 Replies
View Related
Nov 12, 2010
I have Centos ( and Postfix+ldap+dovecot ) TLS works with Postfix and LDAP. When I open evolution mail client I can browse ldap tree and search for users, send-receive mails ...all fine
View 3 Replies
View Related
Jul 25, 2010
Install and configure Samba as a primary domain controller with LDAP on Linux.i setup it step by step following article without error until step 10.i want to join windows client when press user name and password for domain then display message:The following error occurred attempting to join the domain BIGTIME:
The network path was not found.
View 3 Replies
View Related
Feb 16, 2011
I'm having a pretty weird problem, and really have no idea where to begin in tracing and fixing it. But here goes.I'm running Ubuntu 10.10 on 2 machines, and have installed OpenLDAP as per the guide https://help.ubuntu.com/10.10/server...ap-server.html it all seemed to be going well having it installed and running on Server A, including authentication. So a few days later I decided to setup server B to be a slave replica. Which after a little bit of fiddling seems to working and keeping the records in sync.
Then I did an apt-get upgrade on server A. then my problem started.Basically getent passwd, only returns one entry from the LDAP and so does getent group.But a search of LDAP returns everything that's there.I've been comparing the config files between Server A and Server A for PAM etc, and everything is the same.but if I change ldap.conf on server A to point the uri ldap://server B/ and rerun getent passwd it returns all the users and getent group returns all the groups.I've compared the LDAP entries between Server A and Server B and they're staying in sync.It looks like it's more to do with ldap than the auth config if just changing the server fixes it, but as server A is the master LDAP server I'm really at a loss.
If getent was only returning local users it'd be something, but it's returning local + 1 LDAP user or 1 group. Which just seems weird.Any help would be greatly appreciated. I'm sure posting some logs would be helpful, but I have no idea which so if someone can let me know what extra info would be more helpful I'll post it back asap.
View 1 Replies
View Related
Sep 26, 2010
I want to Configure Linux LDAP Server for user authentication when my users want to connect to the internet.Also i don't want the user to get the home directory on server. i configured ldap server and ldap client without PAM & SASL.and now with perl i can search in ldap for my client's username & password in ldap.
View 1 Replies
View Related
Oct 24, 2010
Making a Samba Server with LDAP authentication. Will post as I go along. Found these sources, anything/hiccups I should know before jumping in? Figure would follow the official documentation then check the others for comparative errors.
https://help.ubuntu.com/10.04/server...ap-server.html
https://help.ubuntu.com/10.04/server...amba-ldap.html
http://tuxnetworks.blogspot.com/2010...cid-short.html
Also Do other computers that want access to server also need samba installed (or just client)?
The server is 10.04 and my proposed client is 10.10, does this create problems?
Do I need to use ACL? I see them only in certain places.
Using xfce after Ubuntu install, not sure if this matters.
View 9 Replies
View Related
Jan 18, 2010
how to make a new Ubuntu 9.10 box use our LDAP/Samba server for user authentication. Our Red Hat and Windows machines all use it just fine. I've been trying to use the auth-client-config and libnss-ldap packages for this purpose, but I must be missing something. I'm pretty green with LDAP, so this is my first time diving in... Is there a good How-To or step-by-step read on this? All of my searches lead me to setting up Ubuntu as the server, and that isn't what I want. I've also tried the steps listed in [URL] for the LDAP Authentication section.
View 1 Replies
View Related
Nov 24, 2010
I'm a network services rookie and I am seeing this error, but it doesn't seem to be effecting functionality. Nov 22 12:12:16 r01 nscd: nss_ldap: reconnected to LDAP server ldap://10.5.1.4 after 1 attempt This error is scattered through out my logs. We are authenticating this Red Hat server to another OpenLdap server. Everything seems to work just fine and we are not even using Kerberos as this is a render server. We set-up ldap right in the GUI, nothing fancy.
RHEL 5.4, Basic install, again, nothing fancy. LDAP does seem to be working fine and allows the right people to login to the machine. We have two of these machines running and both are configured exactly the same and getting the same errors.
View 2 Replies
View Related
Jan 21, 2011
ssh to server without username and password
View 1 Replies
View Related
Jun 22, 2010
Is it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies
View Related
Mar 23, 2011
I'd like to manually mount my nfs share mount -t nfs ipaddress:/nfsshare /mnt/nfsfolder but would like to include a userid and password option via command (not via fstab), since the nfs share has different credentials than the server where I'm mounting to. What's the proper switch to include in this line?
View 1 Replies
View Related
Jan 31, 2010
There was a recent thread in this forum regarding capturing of SSH passwords via the use of wireshark. The thread subject was closed, which is a decision that I both agree with as well as agree with the reasoning behind. The thread, however, raised a point of curiosity and concern that I would like to ask about. Quoting from a the book, SSH, The definitive guide,
The client authenticates you to the remote computer's SSH server using an encrypted connection, meaning that your username and password are encrypted before they leave the local machine. The SSH server then logs you in, and your entire login session is encrypted as it travels between client and server. Because the encryption is transparent, you won't notice any differences between telnet and the telnet-like SSH client.
I was under the impression that SSH was impervious to this type of eavesdropping, and quite frankly I take great comfort in that idea. I personally, only allow RSA keys for SSH access and (hopefully) avoid this problem (?) as a result. Does SSH really have a vulnerability in that the authentication is sent via plain text? How to ensure the security of SSH and not on anything that could be considered a how to 'crack' it.
View 6 Replies
View Related
Jul 26, 2011
Im reading a lot on how to rync to an ftp server but none of the steps are telling me how to do it on servers that use normal authentication.Example I want to keep /var/www in sync with a folder on an ftp server in a folder called /cdn/.Id like to see all files and folders in sync, not just a compressed file etc
View 2 Replies
View Related
May 3, 2010
i installed acronis on the server end , the problem is that i have disabled the graphical interface on the server i have a acronis management console on a windows system where the image is being created when i try to connect to the linux server it prompts for username and password after i give the credentials then i get this error
[Code]...
View 2 Replies
View Related
Jan 13, 2011
I bought a firefox extension which support proxy with username and password, but seems only http version and not socks 5 server which I already have installed on server. I know for privoxy, but privoxy don't support username/password. Is there anything else what works with username/password? Also what is different between http and socks5?
View 3 Replies
View Related
Sep 21, 2009
I have set up my samba server. I tested from my windows side, all the public ones works fine except the [homes]. Here is my [homes] setting:
Code:
[homes]
comment = Home Directories
browseable = yes
writable = yes
The homes is suppose to let each user see his/her own home directory. But I tested at the windows side, I found that windows doesn't even prompt me about username or password, it just directly give me "not accessible" error. How do I config so my windows side at least prompt me about username/password?
View 12 Replies
View Related
Feb 18, 2011
I wish to download a webpage, which is secured by username and password, using WGET. The thing is there are many forms on that page and I dont know how to tell WGET which one should it send (by POST method) the parameters. I have solved it till this so far:
wget --post-data="predmet=xxx" --http-user="yyy" --http-password="zzz" [URL]
It gets through the authentication but it will not submit the form.
View 3 Replies
View Related
Sep 24, 2010
i am trying to write a telnet server without username/password function. how to implement such function? the source code from inetutils seems complicated..
View 8 Replies
View Related
Apr 25, 2010
Ok I am new to all this, I did have a server years ago but have forgotten most of what I learned. My problem is getting ftp to connect to the server. I have centos and it has proftpd but I'm lost when it comes to the conf file. I created a user in plesk but when I try to connect with any ftp software it accepts the username but rejects any password. I have tried a million combinations but I just can't get my head around this. I have used it before many years ago and managed ok but that was using webmin. I feel I've bitten off more than I can chew with this server although I have managed everything else
View 2 Replies
View Related
Apr 7, 2011
Iam using centos5.i had installed qmail as MTA.when iam login through squirrel mail it gives login error invalid username or password.And then i tried with domain.
View 2 Replies
View Related
Feb 12, 2010
what is the default username and password to access the firefly daap server?
View 1 Replies
View Related
