Server :: Slave Ldap Didn't Work?

Apr 19, 2010

OS :: Debian Lennyldap :: Openldap (newest one/get from apt-get)replication :: yes (on different machine)secure :: yes (tls)hi there i got problem on slave ldapwhat i am trying to do now is to have machine authenticate at slave ldapwhen master ldap die. So i stop slapd service at master ldap and try to authen. As a result of it, the prompt for login appears to fill in username but with the correct password couldn't make login successfully. I have checked at log file but there is any authen log of that login I wonder if it doesn't direct authen to slave ldap server. Here is my client config ::

#
# LDAP Defaults
#

[code]....

View 3 Replies


ADVERTISEMENT

Server :: Config Ldap Client To Direct Its Authentication To Slave Ldap?

Apr 5, 2010

i have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap

here is my config file on ldap client (i am not sure if it is the right place though)

ip : 192.168.1.183 is master ldap
ip : 192.168.1.185 is slave ldap
pico /etc/ldap/ldap.conf
#
# LDAP Defaults
code....

View 11 Replies View Related

Server :: Slave Dns Server Testing Work?

Apr 21, 2011

how can i teste that my slave dns work better;knowing that my primary dns is in an other machine .i tried to dig the slave ;i have the response but when i halt my primary dns ,i couldn't dig the slave dns.

View 6 Replies View Related

Server :: X Forwarding On SSH In CentOS Didn't Work

May 25, 2010

I was able to do on Debian and Ubuntu Servers X applications running on remote servers where I was able to login via SSH. Tried the same with CentOS did not worked. in /etc/ssh/sshd_config

[Code]....

View 1 Replies View Related

Server :: Openldap Client Fails To Connect Ldap Server 'ldap_bind - Can't Contact LDAP Server

Sep 28, 2010

Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.

Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:

ldapsrv is pingable:

Some outputs:

PHP Code:

PHP Code:

View 20 Replies View Related

Server :: LDAP Does Not Work - Long Time To Log On

Jan 19, 2011

LDAP Server => CentOS 5.5 Configured according to this link [url]

LDAP Client => Fedora 14 Configured according to this link [url]

Now after I reboot the Fedora14 during startup, it takes very very long time to start up the mdmonitor service.

After that when I log on using a local account in the Fedora14 machine, it takes painfully long time to log on. And it does not identify the domain user.

I can able to log on to the ldap server through ssh from the Fedora machine.

I issued the command 'getent passwd' which does not fetch the domain users either. I am completely lost now.

View 14 Replies View Related

OpenSUSE Network :: Setup A LDAP Server Using The Yast-LDAP Server Configuration Tool

May 31, 2010

we have a weird problem with our opensuse 11.2 server installation.

We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.

This indeed already worked weeks ago until....this week.
Maybe some updates??!

I do not know what happend exactly. The server just does not want to start again and throws following error:

Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed

This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.

So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.

I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).

View 4 Replies View Related

Red Hat :: Configuring Ldap Client / Getting "error Ldap_sasl_bind: Can't Contact LDAP Server?

Mar 13, 2010

i have configured ldapserver on rhel4 for creating address book

following are configuration files on ldap server
/etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema

i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.

but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"

also when i configured address book on mozilla on server., it is working fine.but not working on another machine.is any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.

View 3 Replies View Related

Server :: Apache Authentication: Allow LDAP Group OR User Named Guest But Not All LDAP Users?

May 25, 2011

I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.

This is the common part:

Code:

AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all

This part by itself works for the LDAP authentication:

Code:

AuthName "System Admins"
AuthLDAPURL "ldaps://example.com/ou=ldap,o=example.com?mail" SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,o=example.com

This part works by itself for guest access:

Code:

Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user

But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?

View 1 Replies View Related

Server :: OpenVPN Range Address / When Change Static IP To Dynamic IP In Config File OpenVPN Didn't Work?

Feb 13, 2010

I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.

So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.

Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.

Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.

Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.

I hope I explained my problem as well.

My configuration file:

# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file

In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.

View 6 Replies View Related

Networking :: LDAP Configuration Error - Can't Connect To LDAP Server -1

May 31, 2010

I'm trying to set up a Linux server and I am new to this. I have gone through most of the configuration using SAMBA 3.0 and when I populate the ldap directory all I get this error before the password request:

Then when I perform an ldapsearch to see if the directory is populated I get this message:

I'm positive all my .conf files are done right.

View 3 Replies View Related

Programming :: Ubuntu Hardy - Php-ldap - Can't Contact LDAP Server

Nov 28, 2008

I'm checking with a sniffer and there's activity going on between the client and the LDAP server... as a matter of fact, the sniffer shows that the search is producing one ldap item, however, php says it can't contact the ldap server (after it has bound and everything):

The script is working beautifully on another host with debian.

View 7 Replies View Related

Server :: Virtual LDAP Server And Virtual Mediawiki Host - Can't Login With Users From LDAP

Jun 5, 2011

In the past I found some great help on this forum, so here goes. Bare with me because it's a long story. I'll try to be as complete as possible. I've installed and configured OpenLdap on a virtual machine with ip 192.168.39.134. I've added 2 users via LAM. In the ou WikiUsers and the domain is wiki.local.

I've then created another host with ip 192.168.39.133 with mediawiki installed on it. Then I added the extension LDAPAuthenthication. In the LdapAuthentication file I added this code (only the last paragraph is mine, I added the others to show it's location in the script):

Quote:

$path = array( $IP, "$IP/includes", "$IP/languages" );
set_include_path( implode( PATH_SEPARATOR, $path ) . PATH_SEPARATOR . get_include_path() );

[code]...

I know I'm close because I can't register any new users or accounts on the mediawiki site. Although I could before I added the LDAP service. This is indeed all just to test and get to know how LDAP works. That's why it's all virtual in VMWare. I did not really configure anything on the LDAP, i just installed it and chose a domain (wiki.local).

View 5 Replies View Related

Server :: Ubuntu 10.04 Samba + LDAP - Getting Samba To Work Properly

Sep 23, 2010

I'm having some trouble getting samba to work properly. I'm following this tutorial [URL] when I run

Code: sudo smbclient -L localhost I receive the following: Code: Enter root's password: Anonymous login successful Domain=[SAMBA] OS=[Unix] Server=[Samba 3.4.7]
tree connect failed: NT_STATUS_END_OF_FILE I'm lost!

View 3 Replies View Related

Server :: How To Configure Dns Cache Name Server With Slave Domain

Jul 5, 2010

I don't know how configure or how explain what i want to do .... i have one server with dhcpd and dns name cache (also squid as a transparent proxy and iptables), this works fine but logs show this code...

View 1 Replies View Related

Server :: Slave NIS Server Failing Upon Disabling Eth0?

Mar 17, 2011

I have set up a nis slave server on Fedora 14. It was set up on a laptop so that the user can log in when he is at home (no NFS, local home dir). However, whenever the eth0 is disconnected, ypbind fails.

I have tried the same setup on a RHEL 4 (configured it as a slave server) against the same master nis as on the Fedora 14. Disabling eth0 on it however does not fail ypbind.

View 4 Replies View Related

Server :: Difference Between /etc/ldap.conf Vs. /etc/ldap/ldap.conf?

Jul 13, 2010

can anyone tell me what is the difference between these two files of LDAP client /etc/ldap.conf and /etc/ldap/ldap.conf and for what purposes these two files gives services. Is it necessary to have these two files at a time ?

I use these files to install LDAP client to authenticate with our LDAP server by creating a symbolic link of /etc/ldap.conf to /etc/ldap/ldap.conf.

View 8 Replies View Related

Server :: Removing Ldap \ Shows Pam_ldap: Missing File "/etc/ldap.conf"?

May 23, 2011

I had a machine that is using ldap, but need to remove it completely.I edited the /etc/nsswitch.conf and removed all references of ldapand renamed /etc/ldap.conf to /etc/ldap.conf.bakI can log in as root, but cannot log in as any user in /etc/passwdIn the /var/log it shows pam_ldap: missing file "/etc/ldap.conf"I am guessing I am missing something else?I never set this machine up for ldap, was here when i got here, so not sure of steps to even put ldap on.

View 2 Replies View Related

Programming :: One-liner With && And || Didn't Work

Feb 9, 2011

I recently noticed some of my one-liners with && and || didn't work as I expected so I googled for "bash && || pitfalls" and found this page [URL] It's probably my fault, but I still don't understand why it wouldn't work as I want it..... I don't even have the code anymore that wasn't working properly because I rewrote it using if ; then ; command ; fi

View 4 Replies View Related

Red Hat :: CentOS 5.4 PS/2 Keyboard Didn't Work

Jan 22, 2010

Just installed CentOS 5.4, had no problems until the first time it tried to login, where the keyboard didn't work. There are bugs logged on both the CentOS site, and the Red Hat site, but nobody seems to have a definitive solution (other than buy a USB keyboard). Bearing in mind that the machine in question is not hooked up to a network (i.e. no internet updates), is there a way to resolve this issue?

View 6 Replies View Related

Red Hat / Fedora :: Configure DNS Slave Server In RHEL5/6?

Apr 11, 2011

I am studying RHEL myself, not clear with following topics How to configure DNS slave server in RHEL 5 Whether named.rfc1912.zones file entry can be included in named.conf itslef,if not What is following entry means inside named.conf file

zone "." in{
type hint;
file "root.servers";

[code]...

View 3 Replies View Related

General :: Master And Slave DNS Server Replication

Nov 29, 2010

I configured a master DNS server 192.168.2.10 working OK. After that I configure a DNS Slave Server (92.168.2.11)the initial replication worked fine. This is test environment for my certification. I see how the zones from my master are transferred
zones in Master
training.com.db
transferred zone to my slave when I started named service
sec.training.com.db

That's Ok but I added some IPs to resolve to my master zone
webserver IN A 192.168.2.30
fileserver IN A 192.168.2.31

I restart/reload named on master and after that I go to slave and restart/reload but zones wuth the new values are not replicated. How long does it take for slave to take the changes from master? how is the procedure manual or automatic? I see If I go to slave and delete sec.training.com and restart named the zone with the changes is transferred but that is very manual... I am including my DNS Configuration so you can take a look.

View 4 Replies View Related

Server :: Bind Views With Master And Slave

Apr 12, 2011

I have bind configured with Internal and External views, but the slave server is transferring only the Internal zone files for both Internal and External - a diff shows no difference, and the log shows the same serial number.What am I missing in the config so the slave server properly receives updates from the master for both views?

View 2 Replies View Related

Server :: MySQL 5.1 Not Replicating Properly With Slave

Jul 31, 2010

I recently set up replication on a production server and some rows are not making it to the tables on the slave. After 3 days I can see 200+ entries (of 161,000~) that are on the master and not the slave. Logs under /var/log including mysqld.log, mysql.status, messages do not show any problem.I have already tried dropping the DB on the slave and setting up the replication again by doing a stop slave, set slave options such as were in the logging to start, drop table, restore the dump previously made by the master, start slave, but the issue persists.

I following the documentation on the MySQL site for setting up replication so I'm not sure why this is having issues.What can I do to investigate and fix this?

View 2 Replies View Related

CentOS 5 Server :: DNS Not Replicating From Master To Slave?

Jan 27, 2010

I have set up a master BIND DNS server with 2 slaves. All the services start up fine on all 3 servers, but zones and named.conf info is not being replicated. The 3 servers are tentatively installed on a Xen virtual server for testing purposes. All 3 servers are 64bit and installed with: -> CentOS release 5.4 (Final) - 2.6.18-164.10.1.el5xen -> BIND 9.3.6-P1-RedHat-9.3.6-4.P1.el5_4.2

All 3 servers are fully updated. All 3 servers have static IP addresses. The services on all 3 servers start up without any apparent issues. Master server: # /etc/init.d/named restart ; tail -f /var/log/messages

[Code]...

View 10 Replies View Related

CentOS 5 Server :: SOA On Secondary Slave Not Returning Anything?

Apr 12, 2010

I have a secondary slave dns server setup, it has transferred all the records from the primary master.But when I run a few checks from outside using tools on the net it says:Tried to fetch SOA record for domain, but DNS server ns2.domain.com returned error code Refused.I disabled iptables, and tried again, same result. So I think it is something in the named.conf file? I appreciate any extra set of eyes on it. Just feel like I'm so close!

key "rndckey" {
algorithm hmac-md5;
secret "mysecretkey";

[code]....

View 1 Replies View Related

Ubuntu :: Tried Apt-get Remove Dnsmasq. It Didn't Work?

Apr 4, 2010

What does it do?? Can i remove it??i tried apt-get remove dnsmasq. it didn't work

View 9 Replies View Related

Ubuntu :: Mount Hd In The Startup But Id Didn't Work

Jul 20, 2010

i did it to mount my hd in the startup but id didnt work, so i want to undo it, and if somebody can tell how to make my hd to be mounted since the startup

[Code]...

View 5 Replies View Related

Ubuntu :: Graphics Card Didn't Work

Feb 11, 2011

My laptop is an HP Pavilion dv6 3078-tx. It is was a great laptop when it was running windows 7 but when I tried installing Ubuntu, I slowly began to hate it more and more. The issue is with the ATI and Intel switchable graphics card. Ubuntu installs fine and things seem to be great but I cant use the better graphics effects in ubuntu. I installed the driver that ubuntu provides for ATI and it didnt work and ubuntu booted into a terminal etc.. and I had to put it back to the way it was before. After sometime researching on the internet I know the problem is with the swtichable graphics.

Unfortunatley there is no option to turn off switchable graphic in my bios and hp arent much of a help. I dont know what to do now ? Is there any way to get switchable graphics to w ork with linux, is there way to get version of the bios that lets me disable it ? any variations of ubuntu or linux that it works with. I would prefer to use the ATI if i have to disable one or the other cause Im usually running on ac power anyways.

View 2 Replies View Related

Fedora :: Dictionary Widget Didn't Work

Mar 10, 2010

i had just installed fedora 12 and my architecture is x86_64. i add dictionary widget on my plasma desktop. in my office i am using internet via proxy. now how can i configure dictionary widget to use the same proxy settings? in my shell i have export http_proxy variables, where else i am suppose to set proxy?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved