Server :: Checking The Apache Config?
Jul 16, 2010
I'm not all fluent in apache, so bare with me. I inherited this environment months ago, and I am still learning the strangeness of things in it.Here are two of my config files on all my web servers:
/etc/apache2/mods-enabled/cache.conf:
<IfModule mod_cache.c>
<IfModule mod_disk_cache.c>
CacheRoot /var/cache/apache2/mod_disk_cache/
[code]....
Correct me if I'm wrong, but don't these files configure the same settings, and don't they conflict? And if the conflict, which file gets the final say? And if one file overrides the other, can I just remove the one that loses?
View 3 Replies
ADVERTISEMENT
Feb 2, 2011
I try to config my apache server to list all my files: c/c++, php, java files, like the txt file on my server,
e.g /var/www/mydomain/pub
i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name,
if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file,
Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
View 1 Replies
View Related
Feb 23, 2011
config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
View 1 Replies
View Related
Mar 17, 2011
I am trying to add a second vhost to my once working apache config. Now I have things really bollixed up and cannot access anything. I am getting a error 400. The access log shows this:
192.168.0.2 - - [17/Mar/2011:11:24:41 -0400] "GET /" 400 951
192.168.0.2 - - [17/Mar/2011:11:24:41 -0400] "GET /" 400 951 "-" "-"
I have a default (I think) httpd.conf file and put all my config stuff in files in vhosts.d. I have 3 files there:
[Code]...
View 14 Replies
View Related
Nov 6, 2009
it may be a simple doubt i have but i really want to know this,in the httpd.conf file under the server root of apache server.they have instructed not to add a slash at the end when mentioning or giving the path for server root.I think both will still remain the same, then y is that mentioned that way?
View 6 Replies
View Related
Jan 6, 2011
my task is to store the data to a file at server sent via HTTP POST, i written suitable cgi script in C, but the PROBLEM is that i can't complete the task, I guess i require server permission to do so, how to configure server or how to get access right from server to store data to a file.
View 3 Replies
View Related
Jul 29, 2010
I want to restrict the access to my local web server by IP address. Im in a LAN (192.168.200.xx) so i have this:
[code]....
But when i try to connect from 192.168.200.4 it says i don't have permission to access
View 1 Replies
View Related
Aug 8, 2011
I'm setting a cookie value using RewriteRule statements in .htaccess for checking if my site should not redirect from the main desktop site to the mobile site (when accessed via iphone browser). The problem occurs when the first RewriteRule sets "mobile=desktop" in the cookie (from detecting "?desktop=true" in the querystring), the third RewriteRule fails to detect the new cookie value and redirect. If I reload the page again (without any querystring for "?desktop=true"), then the third RewriteRule redirects successfully.
Can anyone tell me why the third RewriteRule fails to detect the cookie value straight after it is set in the first rule? How can I fix this to work properly?
[Code]...
View 4 Replies
View Related
Sep 7, 2009
I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
View 1 Replies
View Related
Apr 18, 2011
I am just configuring my PC for learning php. If I install phpMyAdmin from rpm, it works however if I download it manually and put in /home/user/public_html/phpMyAdmin and then browse [URL], I just see a blank page. What is the reason?
View 7 Replies
View Related
Mar 31, 2011
Create a config file for Apache and this what I need to put and modify to meets my settings
NameVirtualHost *:9091
<VirtualHost *:9091>
DocumentRoot /var/www/trac/my_project
ServerName my_server_name
[Code].....
Do I simply add this within the /etc/httpd/conf/httpd.conf
if not how would I go about doing this
View 3 Replies
View Related
Oct 14, 2010
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
View 7 Replies
View Related
Mar 23, 2010
I've installed mailman on 9.10, using apt-get, have apache2 setup already. However I'm getting 403 forbidden issues when trying to access [URL] I may have mucked something up as initially i jumped straight in and created a virtualhost and played around with the URL redirects. but as far as I can see, it's back to its default and it's still not working... When I try to access the page, in my apache error.log, i get this:
Quote:
[Wed Mar 24 02:36:37 2010] [error] [client 192.168.1.1] attempt to invoke directory as script: /usr/lib/cgi-bin/mailman/
I've tried check_perms, it does give this error:
Quote:
root@babel:/etc/apache2# check_perms
/var/lib/mailman/templates bad group (has: root, expected list)
/var/lib/mailman/bin bad group (has: root, expected list)
/var/lib/mailman/cgi-bin bad group (has: root, expected list)
[code]....
View 1 Replies
View Related
Mar 28, 2010
I have several sites running on a local server. Currently, they're all running on port 80. I need one particular site (and ONLY that site) to also accept connections on port 81.
If I browse to the server IP x.x.x.x:80 directly, Apache's behaviour of showing the default site should work as usual. But, if I browse to IP x.x.x.x:81, it should show a different site (the one that should be accepting both :80 and :81). This part is very important.
I was hoping something like the following would work, but it didn't Currently x.x.x.x:81 still shows what I've called myport80defaultsite.com below.
Code:
Listen 80
Listen 81
<VirtualHost *:80>
ServerName myport80defaultsite.com
[Code].....
View 1 Replies
View Related
Feb 25, 2011
I want to modify apache IPv4 configuration to IPv6 configOn both windows and ubuntu.
View 1 Replies
View Related
Feb 4, 2010
Any one have an idea How to clear apache cache without restarting apache server.
View 5 Replies
View Related
Jan 24, 2010
I am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
View 5 Replies
View Related
May 10, 2010
Sometimes at startup I get this message "Checking disk 1 of 1". Does that mean it's checking all partitions on the hd? After a bad shutdown there is no prompt for fsck to run and the system just boots up. In fstab I have both options set to "1" for the partition Ubuntu is on, all others set to "0". Any ideas on both?
View 3 Replies
View Related
Sep 10, 2010
While executing df command on an AIX Console, by mistake I ended the line with an ampersand:
[Code]...
View 5 Replies
View Related
Aug 28, 2010
I keep getting the error "reverse mapping checking getaddrinfo for fileserver.0.0.10.in-addr.arpa [10.0.0.10] failed - POSSIBLE BREAK-IN ATTEMPT!" in /var/log/auth.log I have a DNS (bind9) setup on my Linux router with the following config:
Code:
router:~# less /etc/bind/named.conf.local
// Local zone definitions here.
zone "0.0.10.in-addr.arpa" {
type master;
file "/etc/bind/db.0.0.10";
[Code]...
View 1 Replies
View Related
Feb 20, 2010
I've installed webdav on my server and I can access it fine through cadaver. However, when I try to access it via nautilus, I get Forbidden. It is NOT secured (SSL). When I try to access it via firefox, I get an error since I DO NOT have "Options Indexes" in my apache config file. If I add this option in, then I can browse the root direction and webdav folder via firefox, but still not from nautilus. what other information you need. I've googled and searched the forums for awhile, but not "solutions" I found have worked for me. I want the webdav folder to just be a single folder within the direction, so this is how I have my config file setup:
[Code]....
As a side-note...when I included "Option Indexes", it allowed me to view the passwd.dav file from firefox!That doesn't seem very good...
View 4 Replies
View Related
Jan 25, 2011
I am looking for a command line utility like ping that can use for checking appropriate services on a server . I do not want do any port scan . I just want to use it for checking apache , mail,ftp and other services on a server if they are running or down.
View 3 Replies
View Related
Jan 20, 2011
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
View 3 Replies
View Related
Apr 21, 2011
I'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
Httpd.conf
Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....
View 2 Replies
View Related
Jun 14, 2009
I would like to setup 2 linux machine each with two ethernet cards, and need to connect to two subnet e.g. 192.168.*.* and 10.0.*.* . If one linux machine out of order, the other will take over all the services(1 httpd and two named(192.168.*.1 and 10.0.0.1 as server ip). What network config is best and easy to failover to other machine?
View 1 Replies
View Related
Jul 19, 2010
I installed a server called Oracle VM Manager, which is actually a web based application to manage Oracle VM server.After successfully installed everything, it suppose to be access by browser using But strange thing is, I can see web pages from the server itself with but any other machines to access it with hostname or ip address all failed.
View 2 Replies
View Related
Mar 24, 2010
I have setupped the PPTP, but failed the config it. My local mechine's IP is dynamic.
IP=66.96.223, user=root pass=nJAG1kK1Tp
View 1 Replies
View Related
May 2, 2011
when installing mysql-server by this command sudo apt-get install mysql-server. Installaton is complete but i cant get a my.cnf file. Can anyone tell, what is the mistake i did and how to overcome from this error. Here, i am posting the results
sam-osm@dhcppc4:~$ sudo nano /etc/mysql/
conf.d/ debian.cnf
View 2 Replies
View Related
May 24, 2010
I'm presently writing software to keep my system time from drifting, it uses an external clock device.To verify it's accuracy I'm running ntpd as a server, and have another server monior the first as a client. This allows me to compare the offset with other 'valid' time servers.The problem is that the monitoring client keeps synchronising with my development server. How can I configure either the dev. server or the client so that it's time won't be selected as a good time source?The ntp.conf on the dev. server looks like:
Code:
server 127.127.1.0 # local clock
fudge 127.127.1.0 stratum 10
[code]...
View 1 Replies
View Related
Dec 17, 2010
I have a Bind DNS caching-only server setup that is working. I am bringing up a new AD domain controller that will also be a DNS server for that AD but I don't want it responding to any DNS queries except those that are AD related.So, my goal is to leave this caching server as the primary DNS server for stations on the network and have it forward requests for the AD domain to the domain controller.My understanding is that I just need a forward zone for that domain pointing to the domain controller. However it does not seem to be working.So that leaves me to think that my caching server is not forwarding properly.
For example, this AD is going to have a naming convention of hostname.mydomain.local.If I do an nslookup and specify the domain controller's IP address as the server, I can query addresses that exist in DNS on that server, such as dc1.mydomain.local.However, queries to my caching server times out (I get a response from the caching server if I query mydomain.local but none of the objects in that domain) Here is my named.conf file:
options {
directory "/var/named";
listen-on { 192.168.0.14; 127.0.0.1; };
[code]....
View 1 Replies
View Related
