I have installed RedHat 6 Beta to act as a front-end to my SAN using NFS. I understand how to allow users to connect to the linux box using NFS, what I am confused on is how to connect the SAN to the linux box. If this linux server was a virtual machine, I would just add a HD on the VM then partition, then share it using NFS. Since it is a physical box, I am missing how you would connect the SAN to the NFS server.
View 7 RepliesI've been looking around at how to set up a VPN server on an Ubuntu box that I can connect to from wherever from an iPhone.What I'm looking for is something like this: [URL]but it did not work (Connecting errored out).I've heard of OpenVPN, but will that allow me to directly connect from my iPhone to my home network?
View 3 Replies View RelatedI used windows OS and installed Ubuntu 10.04 (amd64) in separate partition and works well but had a problem in internet connectivity. Likely reason may be the proxy setting that we used in college (currently). I used this commands to set up the IP address and gateway.
ifconfig -a | grep eth
"eth0"
sudo ifconfig eth0 192.168.5.209 netmask 255.255.255.0
[code]....
Then I manually set the proxy setting of HTTP which is given as proxy server 192.168.5.2 and port as 8000, further more there is a wins setting which is 192.168.1.178, really don't know where to put this number.
I have a home Debian server running, and i would like to set it up as a gateway. I have 2 networkcards in it. So internet comes from the modem and on the other card i want to setup a dhcp server and it has to share the internet. But i want it also to connect to a vpn and share the internet of the vpn.. Is that possible?
View 4 Replies View RelatedAs shown in the image,our lab get the connection from the 'Green-line'.Other network has the IPs 192.168.2.XXX and in our LAN we were given 192.168.1.XXX range. We use Debian server with DNS/DHCP for MAC->IP assignment and name resolution. We can connect to the internet without any problem. My problem is: We can connect (SSH,ping) to the machines with 192.168.2.XXX IPs ,but from that hosts its not possible to connect to our LAN.
View 3 Replies View Relatedi've been trying for the last 2 days (onoff) to setup a simple samba share to connect to my windows 7 box
[Code]....
I recently used this process to connect my Samba network to be able to access and allow Windows XP machines to access my computer on my office network.
For various reasons, all the XP computers on the network are set to fixed (do we say static?) IP addresses with manual DNS. Hence I realised during the Samba setup that I had to set a static IP on my Ubuntu machine similar to my Windows static IP's (ie 192.168.10.?) in order to be able to see the Windows share PC's properly.
Once I set my Ubuntu machine to static IP of 192.168.10.3 with subnet of 255.255.255.0 and gateway of 192.168.0.1 then I was able to access and be accessed by PC's on the network. However I couldn't access the internet after this. I input the DNS server in the edit connections as you can see per the attachment. All these settings (except the IP address obviously) were all now exactly the same as the PC machines, and I thought I'd now be able to access the windows network, as well as have access to the internet, however, even though my wired network is connected there is still no internet access.
I'm using the GUI under network connections to make all these changes if that is important. I can't understand why this doesn't work?
every time I try to connect to the ftp server I setup i am recieving this error Response:*** buffer overflow detected ***: /usr/sbin/vsftpd terminated Error:Could not connect to server
View 1 Replies View RelatedI am trying to setup CentOS server 5 with tftp where the Cisco switch configs can be sent. I have the following:
[code]...
I'm a new debian user. I install a Debian in Virtualbox, and try to connect to the source list to update, but it can't connect to the server, while network and internet connection works. This is my sources.list
deb http://ftp.rediris.es/debian/ squeeze main
deb-src http://ftp.rediris.es/debian/ squeeze main
deb http://security.debian.org/ squeeze/updates main
deb-src http://security.debian.org/ squeeze/updates main
deb http://ftp.rediris.es/debian/ squeeze-updates main
deb-src http://ftp.rediris.es/debian/ squeeze-updates main
I'm trying to setup PS3 media server on my new OpenSuse 11.2 and I'm being unable to connect to the PS3. The multimedia server seems to being working ok, only it has not appear on XMB.
I've been searching on PS3 Media Server forums and try a couple of solutions regarding /etc/hosts and adding full qualified domain name of server to it, but it doesn't seems to work.
I cannot use cvs within eclipse to connect to the server, but when I use cvs in terminal everything works fine.
ERROR Message: Could not connect to :extssh:hongyang@bleong.ndslab.net:/var/cvsroot: CVS communication error: org.eclipse.team.internal.ccvs.ssh2.CVSSSH2ServerConnection$SSH2IOException: Network is unreachable
Network is unreachable
I like to run a mySql database server on a Ubuntu (which is no server) for local use only. Is there some instruction how to do this? I downloaded several DBMS but they all seem to assume a running server.
View 1 Replies View RelatedBecause our visitors/customers are short term, and may be configured incorrectly with their own mail servers we automagically redirect all port 25 traffic going to internal IP's to our own mail servers while on our network.(postfix on centos 5.6)While I have taken some measures to prevent it from spamming, I would greatly appreciate some assistance.I will be putting in clamav, but I haven't configured it yet with the mail.I am using postfix, but can also put on procmail or even spam assassin
View 6 Replies View RelatedHaving some issues setting up sendmail on a (basically) blank RHEL 5.5 server setup. My ultimate goal is to be able to automagically send logs / errors / notifications to ourselves from the server.
Our basic setup is a Win 2003 domain with exchange running on mail.domain.com.au.
I've edited the '/etc/mail/sendmail.mc' and added the :
Code:
line to it.
Also added the domain (domain.com.au) to the '/etc/mail/local-host-names' files
Also edited submit.mc and added
Code:
When I try and send a mail from root or a test user to one of the domain accounts, it seems to go fine, i.e no errors are reported but it never gets delivered.
From the mail logs:
Code:
So it seems to be sent to the queue no problems and when I check the queue :
Code:
Total requests: 0
Not nothing ever gets received. Am I missing something? I have read and read and read but dont seem to be getting any furthur.
So in the end this server doesn't need to do anything except be able to send mail from root to an external mail address.
I was using Red Hat 7.3 forever and decided it was time for a change. I went to Fedora 10 but it was really buggy. CentOS 5.2 is VERY stable.Here is my problem.The server is command line only -- I tend to hate GUI"S.I setup Samba no problem disabling the ports needed through the firewall and that was straightforward.CUPS is a nightmare for me since CentOS locks down the cupsd.conf and then the firewall does its thing. I allowed port 631 through the firewall but then got lost on the cupsd.conf. It's been too long and the old redhat one won't work with CentOS (not surprising since it's a VERY old system) straight-forward CUPS tutorial for a command line interface. I just need it to be:
a) do this
b) do that
Have read a whole bunch of threads from how and troubleshooting but still having problems.Was thrown a box configured by someone who resigned today. Need to get mail from the box outbound via SMTP relay off our exchange server.
View 4 Replies View RelatedI need to grant windows client an access to fileserver. The easiest way to do it is how? Setting up VPN server on Windows server, what rules are going into iptables in linux machine then. Or setting up VPN server on Linux machine (which is the best option) and how the user gets to fileserver?
View 1 Replies View RelatedHow do i configure the system and user accounts so that the users can't access each others directories, delete system files, install packages etc.I know i am probably going to need tools like chmod mkdir useradd.But i can't figure out how.If you know a good tutorial, please point me in that direction.
View 3 Replies View RelatedI have a need to set up the program TNG - The Next Generation of Genealogy Sitebuilding and run it on a local server (not on the Internet) for the purpose of learning the system prior to developing it on an actual website. I was told to use http://localhost on my browser (Mozilla Firefox). I get a message saying "That Works!", but it goes on to say that the contents of the web server have not yet been entered. The instructions for the downloaded files (which I unzipped) said to copy to the web root folder (the folder where the web server is located ?, I guess). But I don't know where it is or how to go about it. Can someone help? I already have MySQL and PHP, which are required to run this program, and I also have Apache installed on my Kubuntu 9.10 system.
View 1 Replies View RelatedI have been having trouble figuring this out. I have a machine running CentOS 5 and I want to setup an SMTP server behind a router on a home broadband connection. I've read many guides but nothing too specific as to what I need to do. I want to use either sendmail or postfix, but I don't know if I should purchase an SMTP relay. If anyone could point me in the right direction it would be great. I also have bought a domain name that I want to use, but I just cant put all these pieces together as of right now.
View 5 Replies View RelatedI have successfully setup Apache,MySql,ftp, and a few other various packages.My question today is setting up an email server.I have past experience with sendmail,and procmail. However only on already installed,configured and working servers.I am trying to setup an email server from scratch.I have Centos 5.4 installed.
procmail.x86_64 3.22-17.1.el5.centos installed
sendmail.x86_64 8.13.8-2.el5 installed
Are those two packages the only ones I need to get a working email server setup? Also I have been trying to configure a procmailrc file for my server under /etc/, but I can't seem to find consistent documentation on how to set up a procmailrc file.I believe my iptables is set to block port 110 and 25 from outside connections. how to open those ports too.
Running CentOS release 5.4
We currently run a web server that allows FTP connections. I want to:
1. Disable FTP on our web server and require sftp only.
2. See if we can create a table of sites that are allowed to connect to the web server using sftp. Or should I just do this at the firewall?
i am trying to send malformed string into ability ftp server in order to have some unexpected crashes. i login in into the ability ftp server on my window 7.On my virtual machine,i am working on a backtrack 4, i tried to send some string to have some unexpected crashes, but i couldn't success.here is the code:
PHP Code:
#!/usr/bin/python
import socket
[code]...
im using webmin to control my server and i wanna make a ftp server which will allow multi users i dont know how i trie dalot of tuts but noting works i just want to give some ftps to my friends so they can help me manage my server
View 4 Replies View RelatedFurther to my previous post, I've been setting up a local web development server using Ubuntu Server 9.10. Thanks to another contributor to this forum, it's now all working.I've installed all of the module necessary (I think) to enable it to act as a DNS server. What I would like to do now is set up a DNS zone inside my network, so that I can go to http://servername instead of http://localhost.I would also like to set it up so that I can have http://servername/www.sitename.com/ and have www.sitename.com as the site root. I've previously achieved something similar using Vhosts on my old setup (which used XAMPP on my local machine). I presumed I could use DNS instead once I'd set up my local webserver.Please bear with me if I'm not referring to things correctly - I'm a web developer who is only just learning about web server management.
View 3 Replies View RelatedI've setted up a CUPS Server and I was wondering if it possible to disable the option of printers and jobs from the webpage.I don't want users to see the jobs which are going to be printed from other users.Should I modify something from the cupsd.conf file?
View 7 Replies View RelatedI have a Windows 2003 Small Business Server and Linux fedora 10 proxy server that is used for internet. On Windows 2003 SBS as a mail exchange. Now need to move away from windows completely to Linux fedora 10. I need to configure a DNS so that i can use the fedora to download email from my ISP to their respectively clients computers.I do not want to host email but still want my ISP to handle the mails and my website. In other words i want to have the same function that is being done by windows to be done by Linux. I have read a some of how [URL], but still confuse How do i configure the DNS and the mail server on my server without disturbing the ISP settings. On my linux server is connected direct to the router that point to the ISP with eth1 192.168.0.1 and eth2 10.0.0.5 for LAN.
[root@perfecpol7 ~]# host www.perfectpol7.com
www.perfectpol7.com is an alias for perfectpol7.com
perfectpol7.com has address 4a.20a.1a8.1x
[code]....
assist in setting up a DNS server so that can set up a mail server for the LAN.
I setting up a web server on my Linux (Centos) using "Apache" web server. And its working well, it will show my websites. But when i try to put my url in a internet browser (ie. only type [URL] ) is only be [URL]. Usually as i know like the other websites [URL] it will go to auto replace the name be [URL]. But my url here it's not be replacing like that. How to do this configuration. I don't know where the services that i need to look. (ie; named (bind) or in Apache web server it self) ?
View 1 Replies View RelatedI want to set up a VNC connection from another network to my PC, ive done it Localy with no probs, but i just cant figure out how to do it from another Network.
View 7 Replies View Related