Im not able to find good response on this from google, urgent help required.
While im looking at my smtp server log at /var/log/maillog, im having these two errors for which im unable to find the reason.
1)Could not open inline file /etc/MailScanner/reports/en/inline.sig.txt, No such file or directory
2)did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA
I am a bit of a linux newbie, but have been gradually teaching myself how to set up Sendmail 8.13.8 on a CentOS system to handle our MX mail for various domains we own on our local server. Configuration has gone well so far, except I cannot seem to get Outlook to authenticate with the SMTP server and I must readily admit to some large gaps in my knowledge. For testing purposes, I have tried to authenticate using Telnet with the following results:
Code:
220 my.domain.com ESMTP Sendmail 8.13.8/8.13.8; Wed, 3 Aug 2011 14:27:00 GMT
ehlo my.domain.com
250-my.domain.com Hello mytelnethost.btcentralplus.com [109.xxx.xxx.xx], pleased to meet you
250-ENHANCEDSTATUSCODES
[Code]...
It seems my sendmail (running in slackware 13.0) cannot send out emails correctly. I guess I need to tell it what is the smtp server to use. And, I heard, gmail's smtp server is available to use for this purpose. How to configure my sendmail this way?
View 14 Replies View RelatedI've got a server set up with Debian. The problem is that my ISP doesn't allow usage of port 25 (as I understand a lot of ISP's don't).I have PHP scripts hat use the mail() function to send e-mails through the Sendmail application.So, my question is: How can I relay messages sent to sendmail to an external SMTP server (like Google Mail, for example)? Would this be easier to do in the PHP configuration, or on the Sendmail side of things?I've used PEAR extensions in PHP to achieve this before, but scripts downloaded from the Internet generally just use the basic mail() function, and it would be a real pain to modify them all.
View 2 Replies View Relatedis that my isp's smtp service is very poorso i want to configure my own smtp servr for my internal clients only for sending emails not receivingi have static ip on my router with 25 port forward i have configure sendmail on linux its working fine on local network mean its sending email on local domainnow i want to send emails on other external domains with my public ipMean user of mydomain.com should be able to send emails on all internet domains like yahoo.com, hotmail.com etc
View 8 Replies View RelatedI have a server "test1" in domain [URL]. I installed sendmail on it. I have another mail server "mailsrv" installed in [URL] which is my primary mail server and contains all accounts and mailboxes. Now when I send email to [URL] from [URL] it sends successfully. But when I try to mail to user1@abc.com it tries to search user1 in [URL] but I want it to forward this mail to mailsrv.abc.com over SMTP port. Delivery will then be taken care by [URL]
My log shows following
Code:
Apr 9 18:37:06 test1 sendmail[7512]: o39Db6Hs007512: to=user1@abc.com, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30047, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o39Db6Il007513 Message accepted for delivery) It should not go to relay=[127.0.0.1], it should go to relay=[10.10.10.1]
I'm hoping someone here can help, as I've been beating my head on the wall for a week now with little advancement. I've found a number of tutorials on setting this up, however none of them have gotten me 100% of the way there. Here's my situation: home-based Fedora server (Core 8), running sendmail 8.14.2-1. Connecting to hosting company's smtp server over port 587, to bypass Verizon's blocking of port 25.
My /etc/mail/sendmail.mc file looks like this (comment lines removed):Quote:
divert(-1)dnl
define(`SMART_HOST', `smtp2.datarealm.com')dnl
define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 PLAIN')dnl
FEATURE(`authinfo',`hash -o /etc/mail/auth/client-info.db')dnl
define(`RELAY_MAILER', `esmtp')dnl
[Code]....
I got one last stop until I've fully configured my Sendmail server. I want the server to verify which address the sender is using when sending mail. Even though authenticated via SMTP AUTH or mailing from an IP listed as RELAY in access.db, the user should not be able to use whichever address he likes.
Ideally, I would like Sendmail to use a file that looks something like this: Username sername@Server.org
where, if logged in with Username, the only accepted sender address is Username@Server.org. As of now, Sendmail just verifies that the sender domain exists and then relays which I don't like. This also applies to a lot of other servers as well... for example in the cases where ISPs have blocked outgoing port 25 and let all their users use their SMTP server. I assume, if they don't use SMTP AUTH which is not the case where I am, that they have their entire IP range listed as RELAY and therefore, using my ISPs SMTP when in their net, I can send mail as whomever I like as long as the sender domain exists.
I've had a look at filters but haven't found any suitable and I assume that this might be realised through a Ruleset or something. What do you think? Have I missed something making this a really stupid suggestion or am I on to something? It would make my day
Sendmail on the RHEL server is set up to forward email to company internal mail server (via SMART_HOST). This has worked fine for years.
From the server, doing a sendmail dave@company.com, the message is sent immediately. No problems - and no change here.
From the server, doing a sendmail roberto@compania.com (compania is the part of the company in Mexico) causes a 2m40s delay before sendmail does anything.
No packets are sent until after 2m40s wait. Message is always sent after the delay. It is not clear what the server is waiting for.
For *each* user in the @compania domain specified in sendmail command, an additional 2:40 is imposed before email is sent. Email is always sent after the n*2:40 sec delay.
Sending email to some_name@AnUnusedDomainNameThatDoesntExist.com is processed immediately - with a bounce email received in a couple of seconds.
Q: How do I determine where this 2m 40s delay is introduced?
I am setting up a CentOS box as a NAT firewall that needs to also send mail. It needs to send this mail using an outside provider's SMTP. The provider requires SMTP over SSL. None of the machines inside the NAT will ever send mail except via the provider's SMTP nor will they ever receive mail except to local clients via the provider's IMAP servers.
So for the example the machine is TESTMACHINE. There is one internet facing ethernet port connected to a DSL modem via pppoe.
The SMTP it needs to send mail via is mail.host.net which requires SMTP over SSL (port 465) and username/password authentication.
The sendmail documentation is quite confusing on how to get this simple setup operating, so an example showing the appropriate changes to sendmail.mc and other require config files.
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
I am using postfix as spam Mailscanner to protect my mail server running sendmail. The problem is that when I forward an email from MailScanner mail me back with the following error:
<postmaster@localhost.@mydomain.com.>... Real domain name required for sender address (in reply to MAIL FROM command))
Jul 27 13:15:59 smtp postfix/local[28465]: C68AC1000001: to=<root@smtp.mydomain.com>,
[code]....
I've been trying to configure sendmail so that it rejects emails based upon a specific string in the msgid. But after reading through the documentation on sendmail.org and doing an internet search.
View 3 Replies View RelatedI have a domain name registered in asianet.com, they provide email service also, can i use local mail server and registrar's smtp server at same time?
View 5 Replies View RelatedI want to allow 100 incoming connections to my linux server running smtp. I know that tcpserver -c will set the limit of allowed incoming connections, but how can I tell what the currently set limit is?
View 4 Replies View RelatedThis is a transcript I get emailed at least once every day, usually about 3 to 10 a day recently.
Transcript of session follows.
SMTP server: errors from unknown[ip address]
<boring stuff snipped>
In: RCPT TO: <server@my domain>
Out: 550 5.1.1 <server@my domain>: Recipient address rejected: User unknown in local recipient table
Session aborted, reason: lost connection Now I cannot seem to find anything via Google, as when I put "server@" anywhere in the string, I just get web hosting or other kroomst. The emails usually come from legit places, usually hotels. Does this mean they are sending bad emails, i.e. they have a Trojan/worm, or is this a live hack attempt?. I believe the later, as I might get upto 3 domains from the one ip address, which is always, NOT associated with the listed domain. Not causing me any issues, except I have been getting a lot recently.
I'm trying to set up a PXE boot server on a PC running Slackware 13.0 using the default apps and info shipped with that Slackware version but to no avail...Carefully reading the Slackware 13.0 README_PXE I've put together this dhcpd.conf file:
# dhcpd.conf
#
# Configuration file for ISC dhcpd (see 'man dhcpd.conf')
[code]....
I have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
So I'm having troubles setting up a mail server. First of all, anyone want to try to telnet into <snip> on port 25 and see if it's blocked? I don't think it is, but you never know. How long does it usually take for MX records to get around? I've had this set up for about a day now and still don't see any MX records on any lookup site I go to. I'm currently using slackware 12.2's default sendmail configuration. Should I change anything? I started sendmail on my laptop and got emails going within the LAN but I cannot send emails over WAN (i.e. to/from yahoo or google accounts).e?
View 14 Replies View RelatedI am working on linux server with below specifications.Linux EDT 2008 i686 i686 i386 GNU/LinuxWhile checking the status of the server using the command 'opmnctl status' and when server is down the output is not getting redirected to file.I m using the command as,opmnctl status > abc.txt.
View 2 Replies View RelatedBuilt an MTA/LDA Slackware Server and seperate MDA (Dovecot 2.2) Slackware Server. Used the slackwiki Sendmail TLS SMTP-AUTH guide for the MTA/LDA Server.
http://www.slackwiki.org/index.php?t...TH&redirect=no
The ../cf/cf/sendmail-slackware-tls-sasl.mc config file has Procmail sorting as:
FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl
I don't understand the arguments ($), but know the -Y forces mbox. The /var/mail directory is hardlinked to where ever the spool directory is. I want the Dovecot MDA server to use NFS or UNFS to grab user's mail from the MTA/LDA Server. Problem is the hardlink. Can't nfs share a hardlinked directory.
Is there a way to change the MTA sendmail mc config file above to have LDA promail send to /home/mail, so I can nfs that directory? And preferably in MAILDIR format? BTW: I can't find any procmailrc config file on this Slackware Server. I should have all the settings in my /etc/mail/sendmail.cf config.
In order to have greater control over the emails sent out the company I imagined the following scenario.ScenarioDescribing in words what I need.ser sends an email to user@hotmail.com for example, using the smtp of my isp (is the internet).Before the email is sent, the firewall checks if the recipient is blocked transparent, if you are locked out rejects the email.I searched several forums and mailing lists, but did not find scenarios similar to mine.Where found situations in which the mail servers were internally in the company, which is not my case.
View 2 Replies View RelatedIm trying to install a trading program fx trading station II on a dedicated virtual server that's linux based at media temple. Any ideas on how to run the program so that the exe file isn't prompting to download the file instead of prompting the user to login and trade?
View 2 Replies View RelatedI'm trying to run kmail on Slackware -Current. Kmail starts then akonadi server runs checks.
Then follow many errors:
I've reinstalled MySQL and it seems to be working but there is this error repeatedly:
I've done some Google searches but I'm not able to find a solution to get akonadi to work.
[url]
my postfix to send and recive external emails, but many recive in trash folder.Other programer say me that is need some configurations in postfix with and dovecot to work, but i dont know what!This is my first time configuring a linux server at this week.
my main.conf
sample_directory = /usr/share/doc/postfix-2.3.3/samples
readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES
[code]...
I've got an uber simple test mail script in php on my awesome new dev machine running Ubuntu:
PHP Code:
Unfortunately, something is preventing mail delivery. I can't tell from this error log whether it's the remote machine rejecting me or whether it's my machine rejecting the self-signed cert on the remote machine:
Code:
I'm wondering what I could change in my postfix configuration to remedy this problem.
I tried setting smtp_tls_security_level = may = may but this did not change anything.
I am using webmin for my daily tasks. I have fedora 13, whenever I click on ''Sendmail M4 Configuration'' or Outgoing Addresses (generics)'' I get the following error message
Quote:
The Sendmail M4 configuration base directory /usr/share/sendmail-cf was not found on your system, or is not the correct directory. Maybe it has not been installed (common for packaged installs of Sendmail), or the module config is incorrect. I read documentation at sendmail.org, it seems that structure of directories for send mail has been changed in version sendmail-8.1.4 shipped with FC13. In webmin config module we have
Quote:
Sendmail M4 base directory = /usr/share/sendmail-cf
which is not there. I did a locate / sendmail-cf on the command line, it finds nothing
Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies View RelatedI'm trying to configure Postfix with a mail server that I programmed in C. The main.cf is set in this way :
Code:
relayhost = [myMailServer.localhost]
smtp_sasl_auth_enable = no
smtp_use_tls = no
disable_dns_lookups=yes
smtp_never_send_ehlo = yes
code....
I don't know why it doesn't receive response after HELO. In fact if I debug my mail server with gdb, I can see it sends a 250 response code. Moreover, I've tested my server both with traditional mail clients, as Thunderbird, and through telnet session and it works very well.
I have a server that runs on a static IP address with many hosting accounts. I am using the IspCP to manage the different sites. When a mail is sent, the headers include the box's own domain name: [URL]. Now [URL] is no longer active, so if an email from another account: [URL] sends mail, there is possibility that this mail is rejected by the receiver, if the receiver system does rDNS.
The receiving server will check the headers smtp sent from [URL] and come up as a fake, because [URL] is no longer registered. I wonder if there is a way to make the smtp headers reflect only the domain name that sent the mail. Then if joe sends mail, the server should replace[URL] with [URL]. If this is possible, then users that send mail will not get bounced because the rDNS lookup will map [URL] to the ip and the mail will be accepted.