I've been trying to configure sendmail so that it rejects emails based upon a specific string in the msgid. But after reading through the documentation on sendmail.org and doing an internet search.
View 3 RepliesIm not able to find good response on this from google, urgent help required.
While im looking at my smtp server log at /var/log/maillog, im having these two errors for which im unable to find the reason.
1)Could not open inline file /etc/MailScanner/reports/en/inline.sig.txt, No such file or directory
2)did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA
I was trying to install and configure freeradius server in centos 5.5 .I installed freeradius 2.1.7. I added a sigle line at the top of the users file like this. bob Cleartext-Password := "hello". when I tried to test using radtest command (radtest bob hello 127.0.0.1 0 testing123).but Igot access-reject mesage from radius server. first I was trying on the same pc with defferent terminal. I serched and tried lot of options but all the time I got the same access reject message. I put debug message in debug site. I can see lot of users posted the same error message in many forums. But I cant find any solutions. I installed ntradping in my laptop and tried but same error. Delaying reject of request 0 for 1 seconds. Going to the next request. Waking up in 0.9 seconds. Sending delayed reject for request 0. Sending Access-Reject of id 16 to 10.10.204.73 port 1619. Waking up in 4.9 seconds. Cleaning up request 0 ID 16 with timestamp +3. Ready to process requests.
View 2 Replies View RelatedI am using webmin for my daily tasks. I have fedora 13, whenever I click on ''Sendmail M4 Configuration'' or Outgoing Addresses (generics)'' I get the following error message
Quote:
The Sendmail M4 configuration base directory /usr/share/sendmail-cf was not found on your system, or is not the correct directory. Maybe it has not been installed (common for packaged installs of Sendmail), or the module config is incorrect. I read documentation at sendmail.org, it seems that structure of directories for send mail has been changed in version sendmail-8.1.4 shipped with FC13. In webmin config module we have
Quote:
Sendmail M4 base directory = /usr/share/sendmail-cf
which is not there. I did a locate / sendmail-cf on the command line, it finds nothing
I have a mail server taking care of mail for my 4 domains; the first is used for virtually all mail, the second rarely used anymore, the third is virtually 100% spam the past year(?), and the fourth isn't in use (and never has been, so no spam). What I'd like to do is to reject all mail to the third domain. Right now this is what I get (I tried to send to a nonexistent address from gmail):
[code]....
Since my username (xyz@) is the same for all domains, I could (or so I hope) change the reject message to give a hint to replace [URL] with [URL] and try again.
start working with SA+Amavis+clamd+postfix+dovecot.will be my filter:spamassassin+amavisd-new+clamd. 1 Server will be my mail server: postfix+dovecot. Like u see, the emails from the outside reach first the filter, latter the mailbox. Now, I have seen in my log files, that if I receive a email to a "unknown user", the filter doesn't detect this and process the email and send it to the mail server. Exist a way to setup the filter to first check if the user exist and them apply all hard work and latter send the email to the mail server
View 3 Replies View RelatedI recently modified sendmail.cf to use a third party SMTP server to send emails. It works great. But when I run sendmail from the command line, I have to specify the -C flag and force feed it the location of my sendmail.cf, or else it doesn't work.
So in other words, the following works great:
However, if I don't specify the -C flag, sendmail doesn't consider what's in the sendmail.cf and barfs:
I don't run sendmail as a daemon. I'm only using it to send emails. I know my modifications of sendmail.cf are correct because it works perfectly when I use the -C flag. I searched my disk to see if I could find another sendmail.cf on the machine and only the one in /etc/mail came up.
Why sendmail is not reading my sendmail.cf?
I'm running Sendmail version 8.14.2 on Fedora Core 8.
I am using postfix as spam Mailscanner to protect my mail server running sendmail. The problem is that when I forward an email from MailScanner mail me back with the following error:
<postmaster@localhost.@mydomain.com.>... Real domain name required for sender address (in reply to MAIL FROM command))
Jul 27 13:15:59 smtp postfix/local[28465]: C68AC1000001: to=<root@smtp.mydomain.com>,
[code]....
I recently setup an email server on Fedora Core (14). Sendmail is running and I am trying to authenticate from a client pc using imaps. I installed Cyrus-imap and it is running and listening on 993. When I try to login, it doesn't accept authentication even though I verified the user's password is correct. (tested with ssh)Is there something I have to do with Cyrus or on the server to allow connections to email? I have not used Cyrus before. I am attempting to access my mail folders via Sendmail and did not make mailboxes in Cyrus. I did allow imaps through the firewall.
View 1 Replies View RelatedAfter searching the forum I could not find a clear answer to my question so I am giving it a try...
I have installed a LAMP server with Postfix as mail server. The scripts send email as user www-data using the mail server on the same machine.
However, the email got rejected by external mail servers (failed reverse DNS check) so I setup a mail server that meets all needed requirements.
Now I would like to use this second server instead of the mail server on the LAMP server. I found that this could be done with changing sendmail settings in php.ini (I think).
However I am not sure how that will go: www-data is no actual user on the new email server (which requires authentication before sending). Do I need to create a new user on the email server or change the settings in php.ini to match an existing user?
I have users [URL] unable to send email to [URL]. [URL] user also unable to send email to [URL]. But both email addresses are fine as they can receive email from others or from [URL] and [URL]. I able to telnet mail server 110 and 25, no problem. Version: ESMTP Sendmail 8.12.10
Mail Log:
Feb 23 11:36:35 mail sendmail[16228]: o1N3aZxt016215: to=<xxx1@gas.com>, ctladdr=<xxx@abc.com> (501/501), delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=442918, relay=gas.com, dsn=5.1.2, stat=Host unknown (Name server: gas.com: no data known)
[code]....
We're running a sendmail server on a fedora core 9 which we've configured recently. The problem is, the server is working fine but there are some e-mails that enter our server but doesn't get forwarded to the user.
Quote:
Quote:
Here it says "stat=Sent" but nothing from the above mail address has been received on the client's inbox. We've experienced this with Microsoft Outlook, Outlook Express and Thunderbird alike so far with Two(2) of our user accounts.
I'm new to send mail. I have a server with a public address and domain name. But I only want to implement a small sendmail network on our 20-user LAN. Can I turn my public server into a sendmail server? Are there any simple step-by-step instructions for this?
View 1 Replies View RelatedI am trying to setup a sendmail server on my dedicated server. It was pre-configured to use exim from cpanel. Is it possible to use exim for all emails from a a certain domain i setup on the server and sendmail for others?
ex.
domain1.com -> exim
domain2.com -> sendmail
If it is possible can someone let me know how i would go about doing this? If it is not how would i disable exim and use sendmail for all mail?
I'm setting up a full server configuration on Fedora, moving it from Mandriva which sadly faces a rather uncertain future. Things are going well and I will be ready (and more familiar with Fedora) in time to upgrade to Fedora 15.
What I have done so far in regard to networking setup:
I first removed Network Manager and replaced it with the network service (chkconfig --level 25 network on). That put an end to the overwriting of /etc/hosts, which now reads simply:
Having some issues setting up sendmail on a (basically) blank RHEL 5.5 server setup. My ultimate goal is to be able to automagically send logs / errors / notifications to ourselves from the server.
Our basic setup is a Win 2003 domain with exchange running on mail.domain.com.au.
I've edited the '/etc/mail/sendmail.mc' and added the :
Code:
line to it.
Also added the domain (domain.com.au) to the '/etc/mail/local-host-names' files
Also edited submit.mc and added
Code:
When I try and send a mail from root or a test user to one of the domain accounts, it seems to go fine, i.e no errors are reported but it never gets delivered.
From the mail logs:
Code:
So it seems to be sent to the queue no problems and when I check the queue :
Code:
Total requests: 0
Not nothing ever gets received. Am I missing something? I have read and read and read but dont seem to be getting any furthur.
So in the end this server doesn't need to do anything except be able to send mail from root to an external mail address.
I am trying to set up a mail server on centos5 using sendmail and dovecot, and eventually spamassassin and some antivirus filter as well. I'd also like to get the proper secure auth mechanism set up at some point too. But for starters, I've been having a lot of difficulty trying to even connect to the mail server from a client computer in the local network. I installed Eudora on the client and after some tweaking in dovecot I was able to connect to the mail server, but then when I try to send an email I get a "connection refused" error, with nothing being logged on the server that I can see.
The last time I set up a mail server was Fedora Core 2, so the configuration files have changed a bit to say the least, and I can't really refer back to those to set up this new server. Does anybody know of a good step-by-step doc on getting the mail server going? I've read the man pages and other various readme's, but these really only list out the available options with no really good explanation of what needs to be done to get the mail server going. If there isn't a full write-up on how to do this, I'll put something together when I'm finished so others can use it in the future.
i have configured sendmail server in my lan and it is working fine for me.but there is one little problem for me. i want mails send sunita should be received by vinita.sunita and vinita both are normal users on same pc.
for this i made entry in
Code:
/etc/aliases sunita: vinita
I've got a server set up with Debian. The problem is that my ISP doesn't allow usage of port 25 (as I understand a lot of ISP's don't).I have PHP scripts hat use the mail() function to send e-mails through the Sendmail application.So, my question is: How can I relay messages sent to sendmail to an external SMTP server (like Google Mail, for example)? Would this be easier to do in the PHP configuration, or on the Sendmail side of things?I've used PEAR extensions in PHP to achieve this before, but scripts downloaded from the Internet generally just use the basic mail() function, and it would be a real pain to modify them all.
View 2 Replies View RelatedHave read a whole bunch of threads from how and troubleshooting but still having problems.Was thrown a box configured by someone who resigned today. Need to get mail from the box outbound via SMTP relay off our exchange server.
View 4 Replies View RelatedI am trying to install either Ubuntu or CentOS server in text mode only. The problem I am having is that the hardware that I am trying to install it on has no vga output, I can only connect to it via console cable. I am able to boot from USB CDROm or flash drive but unfortunately since the hardware does not have a gpu (atleast none that I'm aware of) I am unable to get past the boot screen. If someone can point me in the right direction or know where I would be able to download the text install of either OS, that would be awesome.
View 11 Replies View Relatedwe need to log web access of a certain set of users for analysis. We decided to setup a proxy server which just logs all the requests but does not do anything else like caching/access control etc.All users will be using a fixed set of computers and hence we can redirect their requests to the proxy. I came across Squid, but found it to be too heavy for our requirements. Is there any other proxy-server software that is good enough for what we want or is Squid the only way?
View 1 Replies View RelatedI have been trying to set up ssmtp so I can send email using Gmail's ssmtp servers. However, when I try to send mail (using mailx), I get the following message:
Code:
Can't send mail: sendmail process failed
Here's the last line from dmesg (the only one applicable, according to the timestamps and message content):
Code:
[484114.608378] sendmail[17975]: segfault at 0 ip b7dbbbf3 sp bfb0dc4c error 4 in libc-2.11.2.so[b7d44000+14e000]
Here's my ssmtp.conf:
Code:
#
# /etc/ssmtp.conf -- a config file for sSMTP sendmail.
#
[code].....
I'm using postfix on Ubuntu 9.10 and all I need is to occasionally send automated emails from perl or php scripts when data processing errors occur. In other words, I want to reject any connection attempts from remote clients and otherwise allow nothing except outgoing emails from one particular account.f I add this line to the default main.cf, will it do the trick or is it more complicated?
Code:
smtpd_sender_restrictions reject
I would like to set my postfix to reject any numeric domains. I am seeing in my mail queue mail from domains like 2212.com, 263.com, 29.com and others. Because there is a variety of these, I don't want to track each of them and block them one by one. What do I need to put in my access file to reject any numeric domain? Is it possible to have a numeric wild-card reject in the access db?
View 1 Replies View RelatedI encountered a problem when send dbus method call message.Program A which runs as root user provides system-wide dbus service interfaces.When another program B with root permission send method call message to A,It received the error info:Error org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.41" (uid=0 pid=3397 comm="dbus-send --system --print-reply --type=method_cal") ...But when I run prgram B in generic user permission,localmachine for example,it success to send message.It confused me all the day.
View 2 Replies View RelatedWhat is difference between Ip based server and Namebase Server in (Linux)?
View 4 Replies View RelatedI am trying to set up a web based FTP site on my home server, I got ftp up and running and I can log into it using an ftp client but I want to set it up so I can get to it from the web. I put the directory in the www/html folder but that does not seem to help it
If anyone could point me in the right direction that would be great. I also need to let anonymous users get access to it.
I configured the server freeradius with mysql and I think I configured well freeradius and mysql but when I m testing my configuration with:
radtest nezar azerty 127.0.0.1 0 azerty1234
I have always:
rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=108, length=20
When deleting a rule, when is better to use DROP instead of REJECT and vice versa? Also, please provide some basic info. for the use of MASQUERADE??
View 3 Replies View Related