I would like to set my postfix to reject any numeric domains. I am seeing in my mail queue mail from domains like 2212.com, 263.com, 29.com and others. Because there is a variety of these, I don't want to track each of them and block them one by one. What do I need to put in my access file to reject any numeric domain? Is it possible to have a numeric wild-card reject in the access db?
View 1 RepliesI'm using postfix on Ubuntu 9.10 and all I need is to occasionally send automated emails from perl or php scripts when data processing errors occur. In other words, I want to reject any connection attempts from remote clients and otherwise allow nothing except outgoing emails from one particular account.f I add this line to the default main.cf, will it do the trick or is it more complicated?
Code:
smtpd_sender_restrictions reject
I have a mail server taking care of mail for my 4 domains; the first is used for virtually all mail, the second rarely used anymore, the third is virtually 100% spam the past year(?), and the fourth isn't in use (and never has been, so no spam). What I'd like to do is to reject all mail to the third domain. Right now this is what I get (I tried to send to a nonexistent address from gmail):
[code]....
Since my username (xyz@) is the same for all domains, I could (or so I hope) change the reject message to give a hint to replace [URL] with [URL] and try again.
who manage Postfix servers, what do you recommend is the best way to refuse all incoming and outgoing mail to specific domains? I want a blacklist of domains such as:
- AOL
- Yahoo
- MSN
- Hotmail
- Gmail
Is there a proper way I can tell Postfix to please deny sending and receiving SMTP traffic to and from those specific domains I specify? I see no need in my corp. mail server has to communicate in any way to those. I allow access to all those accounts via port 80/443 so they can just login to the web and send non business related junk this way.
I have Postfix + Unix Accounts + Virtual Domains. I have a bunch of domains hosted on my machine, let's call them [URL] [URL] and [URL]... etc Until know, domain2.com, domain3.com were mapped in virtual domains to [URL] So this is how /etc/postfix/virtual looks like:
[URL]
Like I said, all mail accounts are unix accounts, so, if for example I have the user "paul" this user will receive e-mail for ALL DOMAINS. [URL]But as it turns out, I now need a COMPLETELY ISOLATED domain... let's call it [URL]. So If I create a new user, let's call it "steve" I want steve to receive e-mail ONLY on [URL] and not on all others.
I would have to redo the whole thing from the beginning. I'd have to comment out the $mydestination parameter in the main.cf file and start using only virtual domains. So if I have the following users: paul, steve, sally, megan, jenny and I want paul and steve to ONLY receive mail for domain1.com, sally and megan to receive mail for domain2.com and jenny to receive mail for domainX.com, my /etc/postfix/virtual file would have to look like this:
[URL]
I'd have to create the unix account and then start modifying the /etc/postfix/virtual file.
I have a postfix mail server up and running. I've added more than one domains to recive mail by adding them to the :/etc/postfix/virtual and poiting to a UNIX user account. That works fine. But when users send out mails (From squirrelmail) all users send from the same domain. How do I add a $myorgin to a virtual domain?
View 1 Replies View RelatedI am setting up a Postfix MTA that will be only sending mail for 10 different domains. We have other servers that will be receiving the mail for the domains so I only need to set up for sending on Postfix.
What my issue is I am trying to configure Postfix so that when it sends mail the header shows what domain the mail came from and not the domain the Postfix server is set to. For example....
[URL]
When I send mail from domain2.com I want it to show in the header it was sent from domain2.com and not from domain1.com. What do I need to set in postfix so that this happens? Right now no matter what domain the mail is from the header always shows the server domain and I can't have that.
I am running a spam filter on debian lenny 5.1 with postfix, amavis-new, spamassassin, and clamav. It works pretty well but I would like to finish tweaking it to minimize the mail getting quarantined. It really isn't quarantining anything that isn't spam, except for an occasional list mailer. However, the quarantine is huge, and takes a while to go through. I noticed that much of the spam is coming from foreign country tld's like .cz is there anyway to have postfix run a check on the header and if the email, or smtp origination is from a server from a foreign tld have it just rejected. I can whitelist anything if need be in the future but as of now we don't do any business overseas and don't need to worry about blocking legit email.
I think this should be possible, however, I am unsure of the syntax for the file, where to put it and if wildcards are possible in domain blocking like
Code:
*.cz REJECT
I want to change all outgoing email from my Ubuntu server running postfix to change (masquerade) the username. eg. james@example.com will appear as 'From' 'admin@example.com'. I already know how to masquerade domains, but not users.
View 3 Replies View RelatedI've sifted through hundreds of Google results, but I cannot seem to find a tutorial or how-to for installing and configuring Postfix on Red Hat Enterprise for use with multiple domains. We have a web server serving four websites so far. Each of these websites has their own domain that they'll require email for.
View 3 Replies View RelatedI'm having a problem with a new install of postfix... it won't relay mail to external domains. Internal mail is fine.I'm using virtual_mailbox_domains so that I can have multiple domains, and I've set dovecot to use local files with encrypted passwords.Here's my main.cf
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
[code]....
I have configured postfix to send/receive mail from/to for two domains we manage. [URL] and [URL] Most of the cases there is no issue sending out or receiving emails. However, a few users of domainY.com complained that their senders were not able to sent them email. after much investigation, we started thinking that the mailserver failed to send us email may the failing on doing a SMTP Banner issue.
Is there anyone who knows how to deal with this SMTP banner issue with multiple domain. We want different SMTP banner when doing EHLO on different server.
530 mail.domainX.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
530 mail.domainY.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
i have configured postfix to deliver mail from an internal mail server to external domains... however i keep getting this errors
Code:
un 10 23:23:59 smtpserver postfix/local[28831]: 7800CF0058: to=<root@smtpserver.domain>, orig_to=<postmaster>, relay=local, delay=0, status=sent (delivered to mailbox)
Jun 10 23:23:59 smtpserver postfix/qmgr[5989]: 7800CF0058: removed
Jun 10 23:25:19 smtpserver postfix/smtpd[28824]: connect from unknown[192.168.5.22]
[code]....
I'm running a server with two sites which both need to be able to send emails. Currently I have Postfix set up to send email via Google Apps. This works fine, but Google's servers ignore the From: address I specify and substitute the one I logged in with. Is there a way to make Postfix log into Google Apps with a different username based on what site the email is coming from? The server does not recieve any mail itself; Google recieves it and we have it set to forward it to the appropriate person's real email address. I'm only worried about sending mail.
(Postfix is not a requirement here, so if there's another mailer that can do this better, I'm open to ideas. However, sending email directly from the server isn't an option as it's a residential IP address and blocked by most of the big email providers.)
I am currently running a apache/postfix email service on my server. I am using aliases for two addresses for example:
trscookie@serverone.com
trscookie@secondserver.com
so the emails no matter which domain receives the email trscookie always will receive the email.
However I am unable to work out how to 'reverse' this process, for example.
If i was to go to secondserver.com/webmail I would like the emails to get sent from trscookie@secondserver.com however they are currently all coming from serverone.com. Is it possible to configure this so that it is sent from the correct domain?
Here is my main.cf:
queue_directory = /var/spool/postfix
command_directory = /usr/sbin
daemon_directory = /usr/libexec/postfix
mail_owner = postfix
[Code].....
setting up DKIM AND POSTFIX FOR UBUNTU 9.10 WITH VIRUAL DOMAINS
View 1 Replies View RelatedLet me start off by saying I am experienced with computers, though my knowledge of Linux and networking is limited. I've just recently started setting up a Ubuntu 10.04 server to be a SMTP server. I've followed this guide by the letter: [URL] What I've attempted, to test the server, is the following:
telnet localhost 25
ehlo localhost
(this returns all the desired information) I then do a MAIL FROM my domain which is accepted, and try to do a RCPT TO an external mail server (gmail) to test sending an email. I am then told 'Relay Access Denied'. I'm sure that there's something fundamental that I'm either not understanding or not doing correctly. I simply want an SMTP server that can send to other domains. What do I need to do?
I would like to setup postfix to act as a relay for the outgoing mails of a couple of servers each serving it's own domain.The mails we are talking about are standard administrative emails like user registration, password reset request. The volume of those mails will naturally grow as the site grows. Which for me poses the problem that depending on the growth of the site you will sooner or later hit the quotas imposed by (my otherwise preferred) providers like GMail or smtp.com.
So what I need is a mail relay that will only accept mails from authenticated clients from hosts in its access list and relay their mail without restrictions. Is that possible with postfix? What has to be changed in the config and what are the pitfalls?
Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
Here is what i do: make clean make makefiles CCARGS='-DEF_CONFIG_DIR="/opt/product/postfix-2.6.5/etc"
-DEF_COMMAND_DIR="/opt/product/postfix-2.6.5"
-DEF_DAEMON_DIR="/opt/product/postfix-2.6.5/libexec"
-DEF_MAILQ_PATH="/opt/product/postfix-2.6.5/bin/mailq"
-DEF_DATA_DIR="/opt/product/postfix-2.6.5/lib"
-DEF_NEWALIAS_DIR="/opt/product/postfix-2.6.5/bin/newaliases"
[Code]...
make install then i got this error: postfix: fatal: chdir(/usr/libexec/postfix): No such file or directory make: *** [install] Error 1 I don't understand why it's checking the usr/libexec folder for the daemons although I've set the folder to /opt/product/postfix-2.6.5/libexec in the makefile. Here is also the cat of my makedefs.out:
[Code]....
I've been trying to configure sendmail so that it rejects emails based upon a specific string in the msgid. But after reading through the documentation on sendmail.org and doing an internet search.
View 3 Replies View RelatedI encountered a problem when send dbus method call message.Program A which runs as root user provides system-wide dbus service interfaces.When another program B with root permission send method call message to A,It received the error info:Error org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.41" (uid=0 pid=3397 comm="dbus-send --system --print-reply --type=method_cal") ...But when I run prgram B in generic user permission,localmachine for example,it success to send message.It confused me all the day.
View 2 Replies View RelatedI configured the server freeradius with mysql and I think I configured well freeradius and mysql but when I m testing my configuration with:
radtest nezar azerty 127.0.0.1 0 azerty1234
I have always:
rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=108, length=20
I was trying to install and configure freeradius server in centos 5.5 .I installed freeradius 2.1.7. I added a sigle line at the top of the users file like this. bob Cleartext-Password := "hello". when I tried to test using radtest command (radtest bob hello 127.0.0.1 0 testing123).but Igot access-reject mesage from radius server. first I was trying on the same pc with defferent terminal. I serched and tried lot of options but all the time I got the same access reject message. I put debug message in debug site. I can see lot of users posted the same error message in many forums. But I cant find any solutions. I installed ntradping in my laptop and tried but same error. Delaying reject of request 0 for 1 seconds. Going to the next request. Waking up in 0.9 seconds. Sending delayed reject for request 0. Sending Access-Reject of id 16 to 10.10.204.73 port 1619. Waking up in 4.9 seconds. Cleaning up request 0 ID 16 with timestamp +3. Ready to process requests.
View 2 Replies View RelatedWhen deleting a rule, when is better to use DROP instead of REJECT and vice versa? Also, please provide some basic info. for the use of MASQUERADE??
View 3 Replies View RelatedI have configured a sendmail MTA for incoming mails in a network and by using IPtables i have redirected the traffic internally to other port where one more SMTP by a application is running.Iptables rule:iptables -A INPUT -i eth0 -p tcp --dport 25 -j ACCEPTiptables -A PREROUTING -t nat -i eth0 -p tcp --dport 25 -j REDIRECT --to-port 25000My sendmail config is as below.
Sendmail.mc
define(`SMART_HOST', `relay:host.subdomain.mydomain.com')dnl
dnl # define(`RELAY_MAILER',`esmtp')dnl
[code]...
I usually have something like
iptables -A OUTPUT -p tcp --dport 113 -j REJECT --reject-with tcp-reset
in my firewall near the top, as I dont want the servers to generate ident requests and I don't want services (mail and ftp...) stalling when waiting for ident replies on clients with ident port filtered. This worked fine until the 164 kernel series.
Tested both 2.6.18-164.2.1.el5 and 2.6.18-164.6.1.el5. The rule gets matched, but the rst is never returned to the application so it stalls in every case. Booted back to 2.6.18-128.1.10.el5 and it works like a charm. I see no netfilter related patches in the 164 series that weren't present in 128.
a good IPTABLES protocol to reject all incoming ssh trafiic except for a single IP or IP range?
View 4 Replies View RelatedI am trying to get the talked about Unity netbook shell through my Lucid installation. When i add the repository Code: ppa:canonical-dx-team/une i am offered a list of packages for upgrade which system says is also a partial upgrade. I know i should not be accepting a partial upgrade since it runs the risk of breaking my Lucid install itself - so i have not. How do i not reject these partial upgrades due to the repo addition & still install Unity?
View 3 Replies View RelatedI understand the difference between Reject vs Drop for incoming traffic, but are there any differences between reject and drop for Outbound Traffic? Are there reasons to pick one over the other or are they functionally identical when talking about Outbound traffic?
View 6 Replies View Related