I bought a firefox extension which support proxy with username and password, but seems only http version and not socks 5 server which I already have installed on server. I know for privoxy, but privoxy don't support username/password. Is there anything else what works with username/password? Also what is different between http and socks5?
View 3 RepliesIs there a way to SSH into a server (my home computer) from behind a proxy that has a username and password? I read about corkscrew, but I was wondering if there is a simpler way.
View 1 Replies View RelatedI'm trying to use Kubuntu 10.04 in a corporate environment. Our environment uses an internet proxy that requires a username and password.Under Ubuntu 10.04, I can use the GUI to set the proxy host, port, username and password. When I do this, all the web browsers work, Snyaptic works, etc.However, under Kubuntu 10.04, the GUI lets me specify a proxy host and port, but doesn't appear to save the username and password. Because of this, I have to manually set the proxy information on my web browser, but the package managers don't work because they can't access the internet. Apparently the ability to specify proxy username and password is either broken or unfinished.
View 4 Replies View Relatedi am after proxy server, i add the proxy server access username and password
[Code]....
it said the export is succecefully done, but after trying to install something using yum, its give me this [root@locVirtual-linuxtest etc]# yum install samba
[Code].....
I am configuring a proxy server in my desktop, which in turn passthough a proxy ( parent proxy ). I have added following line for this
cache_peer proxy.tcs.com parent 8080 0 proxy-only default
But for parent proxy, we have to specify username and password in this line, I am confused here.
login=userassword | PASS | *assword
Here where I have to enter username and password ?
I need to have Opensuse 11.2 use my proxy server here in the office and it is by hostname/ip:8080 only not HTTP. The problem is using Yast2 I don't have the option of using the proxy that way it wants http. I've been using opensuse on and off since 9 (great flavor BTW my favorite) Easy as you need it to be and just as complicated as you want it to be, a perfect mix.
View 8 Replies View RelatedI'm trying to set up a server for an NPO who connects to the Internet through an internal proxy (Websense). I can't access the Internet unless through the proxy.
Since it's a server I did not install a GUI so I'm wondering how to connect the new server to said proxy server. I have the IP address, port number and username-password for the proxy server. The new server has a static IP address and is ready too go!
I want to start using squd3 as proxy server for one of my network 192.168.6.0/24
I was try using some configurations but http pages not loaded.
I have searched and searched for a reverse proxy solution for non-website traffic. TCP but not http, on ports other than 80, 443, 8080, etc. Basically I just need a TCP forwarder that works with multiple TCP servers, WITHOUT webpage caching features. I do not need or want any webpage caching. Can squid work as a reverse proxy for TCP traffic without http? The other program I came across in searching was HAproxy. Both programs are for http but I am curious if they would work for TCP servers that do not serve webpages.
View 2 Replies View RelatedWill squid or HAproxy work to reverse proxy non-http traffic? I have searched and searched for a reverse proxy solution for non-website traffic. TCP but not http, on ports other than 80, 443, 8080, etc. Basically I just need a TCP forwarder that works with multiple TCP servers, WITHOUT webpage caching features. I do not need or want any webpage caching. Can squid work as a reverse proxy for TCP traffic without http? The other program I came across in searching was HAproxy. Both programs are for http but I am curious if they would work for TCP servers that do not serve webpages.
View 4 Replies View RelatedA Linux (CentOS5.3) server is setup with apache reverse proxy. The reverse proxy server is opened to outside and an internal server is mapped to ProxyPass configuration. SSL certificate is also installed on the Apache reverse proxy server. The problem is, it is extremely slow in serving http requests through reverse proxy. There is no problem with server resources or bandwidth. When the internal server is directly accessed through Internet, there is no delay. The backend server and the reverse proxy server are also on the same switch (same subnet). When I searched the Net, there were recommendations to enable cache in Apache. I did so as follows in httpd.conf.
<IfModule mod_disk_cache.c>
CacheEnable disk /
CacheRoot "/var/cache/mod_proxy"
CacheDirLevels 5
CacheDirLength 3
</IfModule>
But still there is no progress. Do I want to enable cache in ssl.conf too? Or is there any other workaround to speed up Apache reverse proxy. Is there a way to check that caching is happening?
I've been trying to make myself anonymous, but I cant find 'Tor' anywhere, tried 'yum & kpackagekit' neither have it. I did find 'Privoxy', installed it, set proxy for HTTP and HTTPS in Firefox, but it says 'unknown proxy' when I try to use it! I've been to the Privoxy web site and read through the 'User manual', but most of it is 'geek' to me!
View 8 Replies View Relatedssh to server without username and password
View 1 Replies View RelatedI've been doing some security testing in a lab environment that does not have direct internet access. It's actually a little complicated: From home to connect to my lab machine, I
1. SSH to machineA.
2. SSH from machineA to machineB
where machineB is my actual lab machine. neither machineA or machineB allow anything other than SSH, and machineB is only accessible from machineA. However, I really need to run yum on machineB. I have managed to get internet access via Firefox on machineB by creating a series of SOCKS proxy via SSH.
1. machineB: ssh -L 12345:localhost:12345 user@machineA
2. machineA: ssh -D 12345 user@machineC
3. machineB: configure firefox to use socks proxy, localhost, 12345
where machineC has internet without limits placed. This is the only way I have managed to get internet working. I tried using ssh -L all the way from machineB->machineA->machineC but it didn't work (even when setting Firefox to use http proxy). I tried using ssh -D all the way, but again that doesn't work either.
I do have access via Firefox using socks proxy. However, yum update fails to retrieve mirror list, and from what I have found I don't believe yum supports socks proxy directly. Instead, it uses http_proxy / ftp_proxy. how to get yum to go out over the SOCKS proxy I created (same one using in Firefox)? It seems like since Firefox can access the internet and everything without issues, i should be able to get yum to tunnel through the same connection to access everything.... I tried
[URL]
I'm trying to setup a Centos 5.6 Squid Proxy Server with Content Filtering & Antivirus Scanning Incoming HTTP Traffic from the Internet
I then proceeded to setup an configure the Proxy Server, i was able to test and confirm that Squid and Dansguardian Content Filter is working, however i dont know if Clamav is scanning HTTP traffic before it hits the client/server. Is there a way i can check if the Antivirus scanning is working.. is there some log file or real world test i can i can do to confirm that Clamav is scanning incoming traffic or even blocking potential viruses ??
Anyone who has squid proxy server with Clamav configured and its working can share there settings/setup with me and how they tested it ??
Is it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies View RelatedI'd like to manually mount my nfs share mount -t nfs ipaddress:/nfsshare /mnt/nfsfolder but would like to include a userid and password option via command (not via fstab), since the nfs share has different credentials than the server where I'm mounting to. What's the proper switch to include in this line?
View 1 Replies View RelatedThere was a recent thread in this forum regarding capturing of SSH passwords via the use of wireshark. The thread subject was closed, which is a decision that I both agree with as well as agree with the reasoning behind. The thread, however, raised a point of curiosity and concern that I would like to ask about. Quoting from a the book, SSH, The definitive guide,
The client authenticates you to the remote computer's SSH server using an encrypted connection, meaning that your username and password are encrypted before they leave the local machine. The SSH server then logs you in, and your entire login session is encrypted as it travels between client and server. Because the encryption is transparent, you won't notice any differences between telnet and the telnet-like SSH client.
I was under the impression that SSH was impervious to this type of eavesdropping, and quite frankly I take great comfort in that idea. I personally, only allow RSA keys for SSH access and (hopefully) avoid this problem (?) as a result. Does SSH really have a vulnerability in that the authentication is sent via plain text? How to ensure the security of SSH and not on anything that could be considered a how to 'crack' it.
Im reading a lot on how to rync to an ftp server but none of the steps are telling me how to do it on servers that use normal authentication.Example I want to keep /var/www in sync with a folder on an ftp server in a folder called /cdn/.Id like to see all files and folders in sync, not just a compressed file etc
View 2 Replies View Relatedi installed acronis on the server end , the problem is that i have disabled the graphical interface on the server i have a acronis management console on a windows system where the image is being created when i try to connect to the linux server it prompts for username and password after i give the credentials then i get this error
[Code]...
I started a new job and they use LDAP here. I built a new RHEL 5.5 server and configured LDAP. Usernames are recognized but the password is not. I can chown a file to a user name but when I try to login as the user it won't accept the password.I know the password is correct because I can login to any of the old boxes and it accepts the password. I ran authconfig-tui to tell my RHEL box to authenticate to ldap.
View 1 Replies View RelatedI have set up my samba server. I tested from my windows side, all the public ones works fine except the [homes]. Here is my [homes] setting:
Code:
[homes]
comment = Home Directories
browseable = yes
writable = yes
The homes is suppose to let each user see his/her own home directory. But I tested at the windows side, I found that windows doesn't even prompt me about username or password, it just directly give me "not accessible" error. How do I config so my windows side at least prompt me about username/password?
I wish to download a webpage, which is secured by username and password, using WGET. The thing is there are many forms on that page and I dont know how to tell WGET which one should it send (by POST method) the parameters. I have solved it till this so far:
wget --post-data="predmet=xxx" --http-user="yyy" --http-password="zzz" [URL]
It gets through the authentication but it will not submit the form.
i am trying to write a telnet server without username/password function. how to implement such function? the source code from inetutils seems complicated..
View 8 Replies View RelatedI have set it up, but I'm not sure whether the admin username and password are set correctly. How do I confirm? Also, if someone has any links explaining the format of an LDIF file.
View 8 Replies View RelatedOk I am new to all this, I did have a server years ago but have forgotten most of what I learned. My problem is getting ftp to connect to the server. I have centos and it has proftpd but I'm lost when it comes to the conf file. I created a user in plesk but when I try to connect with any ftp software it accepts the username but rejects any password. I have tried a million combinations but I just can't get my head around this. I have used it before many years ago and managed ok but that was using webmin. I feel I've bitten off more than I can chew with this server although I have managed everything else
View 2 Replies View RelatedIam using centos5.i had installed qmail as MTA.when iam login through squirrel mail it gives login error invalid username or password.And then i tried with domain.
View 2 Replies View Relatedwhat is the default username and password to access the firefly daap server?
View 1 Replies View RelatedI installed Apache Tomcat6,every thing is running fine but facing problem in Tomcat administration webapps:- in manager webapp [URL] in this i am using username=manager password=s3cret but not it is not authenticating with these credentials in host-manager webapp [URL] in this,i am using username=admin password=s3cret
but it is also not authenticating with these credentials i edited file /etc/tomcat6/tomcat-users.xml
[Code]...
Im trying to set up a Proxy server on my CentOS server and I have been looking at Squid, however I wondered if there is a proxy server that will support having authenticated users and passwords in a MySQL database?I wanted to do this so I have good control over who is connected through my proxy.
View 6 Replies View Related