i am trying to write a telnet server without username/password function. how to implement such function? the source code from inetutils seems complicated..
View 8 Repliesi installed acronis on the server end , the problem is that i have disabled the graphical interface on the server i have a acronis management console on a windows system where the image is being created when i try to connect to the linux server it prompts for username and password after i give the credentials then i get this error
[Code]...
the function terminates if no key is pressed for 10 consecutive seconds. I tried using the -t option as suggested in some forums, but my version of showkey doesn't have the option of changing the timeout. The options I get are:
-h --helpdisplay this help text
-a --asciidisplay the decimal/octal/hex values of the keys
-s --scancodesdisplay only the raw scan-codes
-k --keycodesdisplay only the interpreted keycodes (default).
Is it possible to write a script to use this function and still keep the function active until an interrupt is recieved?
how i will write my own telnet server instead of existing one.please give me the path for telnet.c file in the linux kernel
View 9 Replies View Relatedbrand new 2 Ubantu & set up standard Ubantu compartment accessed via 1 user name only and password. 1st few times all good but now suddenly, unexpectedly password declared invalid. Had written down password so it is correct & not entry error. Not know how to reset password or bypass 'username/password log on screen' Am on an Acer 5542G with windows 7 home premium.
View 3 Replies View Relatedssh to server without username and password
View 1 Replies View RelatedIs it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies View RelatedI'd like to manually mount my nfs share mount -t nfs ipaddress:/nfsshare /mnt/nfsfolder but would like to include a userid and password option via command (not via fstab), since the nfs share has different credentials than the server where I'm mounting to. What's the proper switch to include in this line?
View 1 Replies View RelatedThere was a recent thread in this forum regarding capturing of SSH passwords via the use of wireshark. The thread subject was closed, which is a decision that I both agree with as well as agree with the reasoning behind. The thread, however, raised a point of curiosity and concern that I would like to ask about. Quoting from a the book, SSH, The definitive guide,
The client authenticates you to the remote computer's SSH server using an encrypted connection, meaning that your username and password are encrypted before they leave the local machine. The SSH server then logs you in, and your entire login session is encrypted as it travels between client and server. Because the encryption is transparent, you won't notice any differences between telnet and the telnet-like SSH client.
I was under the impression that SSH was impervious to this type of eavesdropping, and quite frankly I take great comfort in that idea. I personally, only allow RSA keys for SSH access and (hopefully) avoid this problem (?) as a result. Does SSH really have a vulnerability in that the authentication is sent via plain text? How to ensure the security of SSH and not on anything that could be considered a how to 'crack' it.
Im reading a lot on how to rync to an ftp server but none of the steps are telling me how to do it on servers that use normal authentication.Example I want to keep /var/www in sync with a folder on an ftp server in a folder called /cdn/.Id like to see all files and folders in sync, not just a compressed file etc
View 2 Replies View RelatedI bought a firefox extension which support proxy with username and password, but seems only http version and not socks 5 server which I already have installed on server. I know for privoxy, but privoxy don't support username/password. Is there anything else what works with username/password? Also what is different between http and socks5?
View 3 Replies View RelatedI started a new job and they use LDAP here. I built a new RHEL 5.5 server and configured LDAP. Usernames are recognized but the password is not. I can chown a file to a user name but when I try to login as the user it won't accept the password.I know the password is correct because I can login to any of the old boxes and it accepts the password. I ran authconfig-tui to tell my RHEL box to authenticate to ldap.
View 1 Replies View RelatedI have set up my samba server. I tested from my windows side, all the public ones works fine except the [homes]. Here is my [homes] setting:
Code:
[homes]
comment = Home Directories
browseable = yes
writable = yes
The homes is suppose to let each user see his/her own home directory. But I tested at the windows side, I found that windows doesn't even prompt me about username or password, it just directly give me "not accessible" error. How do I config so my windows side at least prompt me about username/password?
I wish to download a webpage, which is secured by username and password, using WGET. The thing is there are many forms on that page and I dont know how to tell WGET which one should it send (by POST method) the parameters. I have solved it till this so far:
wget --post-data="predmet=xxx" --http-user="yyy" --http-password="zzz" [URL]
It gets through the authentication but it will not submit the form.
I have set it up, but I'm not sure whether the admin username and password are set correctly. How do I confirm? Also, if someone has any links explaining the format of an LDIF file.
View 8 Replies View RelatedOk I am new to all this, I did have a server years ago but have forgotten most of what I learned. My problem is getting ftp to connect to the server. I have centos and it has proftpd but I'm lost when it comes to the conf file. I created a user in plesk but when I try to connect with any ftp software it accepts the username but rejects any password. I have tried a million combinations but I just can't get my head around this. I have used it before many years ago and managed ok but that was using webmin. I feel I've bitten off more than I can chew with this server although I have managed everything else
View 2 Replies View RelatedIam using centos5.i had installed qmail as MTA.when iam login through squirrel mail it gives login error invalid username or password.And then i tried with domain.
View 2 Replies View Relatedwhat is the default username and password to access the firefly daap server?
View 1 Replies View RelatedI installed Apache Tomcat6,every thing is running fine but facing problem in Tomcat administration webapps:- in manager webapp [URL] in this i am using username=manager password=s3cret but not it is not authenticating with these credentials in host-manager webapp [URL] in this,i am using username=admin password=s3cret
but it is also not authenticating with these credentials i edited file /etc/tomcat6/tomcat-users.xml
[Code]...
I'm using Ubuntu 10.04LTS. I'm trying to configure my chat accounts. But after entering username and password, it is asking "Enter password to unlock your login keyring". I have entered my login password. But it is saying that "The password you use to log in to your computer no longer matches that of your login keyring."
View 4 Replies View RelatedWe have Ubuntu 8.04 running on our mail server and remote smtp connection does not work.
When trying to send with a client such as Thunderbird it complains about a wrong usernamepassword.
Receiving mail with IMAP and POP3 works fine through Thunderbird. Both receiving and sending mail through a web interface(horde) works.
I can remotely telnet the server at port 25 and this is the output of ehlo:
Code:
250-**server address**
250-PIPELINING
250-SIZE 25000000
250-VRFY
250-ETRN
250-STARTTLS
250-AUTH PLAIN LOGIN
code....
Is there a way to SSH into a server (my home computer) from behind a proxy that has a username and password? I read about corkscrew, but I was wondering if there is a simpler way.
View 1 Replies View Relatedi worked on steps illustrated in [URL]... nagios website documentation. every thing goes smooth in last i stuck to connect it with web-browser. it ask for username and password when i give the same it is not authorizing it(i am giving correct password and user name).
[code]...
How come I can log in under my username using root password? Where can I fix this? I am running Fedora 10.
View 5 Replies View RelatedI currently have a UNIX script with a function that uses a username and password to connect to the database, retrieve some information and then exit. At the moment, am getting the username and password from a hidden plain text file and permission set to -r--------, i.e. read only to who own the file. The owner of the file is the same owner of the script. At the moment, am not too overly concern as the script works as it is but I want to know if anyone have a suggestion if there is any better way of achieving the same thing with some "form" of security, i.e., for example, masking the username/password.
Basically, I want to be able to mask or hide the username or password in some way. I've thought about encryting the password file, which is in plain text, using simple crypt command from which I retrieve the username and password but I need to decrypt it as well which is sort of similar to how it will be as it is now once it is decrypted. Is there anyway that I can get a username and password in some gibberish format and then translating them into something usable which can be passed on the next command that requires the username/password.
Its been since October since I accessed my Arch OS, due to a career and phical move. Since that time I forgot my username and password (including root).My question is, is there a way to get around it without starting from scratch? Oh yeah, mbackup live CD is 700 miles away! lol I can only guess what the answer is going to be.
View 6 Replies View Relatedhi to all, i am a newbie in linux and i am using CentOS 5 and our office just transferred this responsibility on my job and still have no idea on how to change the username and password on squint. the one incharge was already resigned and did not turn-over the procedures.
View 1 Replies View RelatedI am trying to create a "GUI File Transfer " Application , for transferring the files within the network. For That I will obtain User name, Password through the GUI, I will have to append username and password in a single line and run it . I am facing difficulties in exploring the "command",
View 4 Replies View RelatedJust wanted to know Where would i get the Tomcat manager's username and password .My tomcat version is apache-tomcat-5.5.29.
Quote:
/install/apache-tomcat-5.5.29/conf/tomcat-users.xml
Code:
<?xml version='1.0' encoding='utf-8'?>
<tomcat-users>
<role rolename="tomcat"/>
<role rolename="role1"/>
[code]....
I am new to Linux, I have recently bought a mini laptop for my daughter and it has linux installed. After initial looking through the linux software, (which I love) she has somehow managed to put in a user name and password, but has no idea what it is.How do I login without this information.
View 14 Replies View Related