I'd like to manually mount my nfs share mount -t nfs ipaddress:/nfsshare /mnt/nfsfolder but would like to include a userid and password option via command (not via fstab), since the nfs share has different credentials than the server where I'm mounting to. What's the proper switch to include in this line?
View 1 RepliesI use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.
ssh to server without username and password
View 1 Replies View RelatedI want to give my users option of logging to the system. They should have posibillity for choosing option betweend logging to the system with their default password or one-time password OTPW. I installed OTPW in my Debian. Here is my /etc/pam.d/sshd file:
[Code]....
Is it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies View RelatedThere was a recent thread in this forum regarding capturing of SSH passwords via the use of wireshark. The thread subject was closed, which is a decision that I both agree with as well as agree with the reasoning behind. The thread, however, raised a point of curiosity and concern that I would like to ask about. Quoting from a the book, SSH, The definitive guide,
The client authenticates you to the remote computer's SSH server using an encrypted connection, meaning that your username and password are encrypted before they leave the local machine. The SSH server then logs you in, and your entire login session is encrypted as it travels between client and server. Because the encryption is transparent, you won't notice any differences between telnet and the telnet-like SSH client.
I was under the impression that SSH was impervious to this type of eavesdropping, and quite frankly I take great comfort in that idea. I personally, only allow RSA keys for SSH access and (hopefully) avoid this problem (?) as a result. Does SSH really have a vulnerability in that the authentication is sent via plain text? How to ensure the security of SSH and not on anything that could be considered a how to 'crack' it.
Im reading a lot on how to rync to an ftp server but none of the steps are telling me how to do it on servers that use normal authentication.Example I want to keep /var/www in sync with a folder on an ftp server in a folder called /cdn/.Id like to see all files and folders in sync, not just a compressed file etc
View 2 Replies View Relatedi installed acronis on the server end , the problem is that i have disabled the graphical interface on the server i have a acronis management console on a windows system where the image is being created when i try to connect to the linux server it prompts for username and password after i give the credentials then i get this error
[Code]...
I bought a firefox extension which support proxy with username and password, but seems only http version and not socks 5 server which I already have installed on server. I know for privoxy, but privoxy don't support username/password. Is there anything else what works with username/password? Also what is different between http and socks5?
View 3 Replies View RelatedI started a new job and they use LDAP here. I built a new RHEL 5.5 server and configured LDAP. Usernames are recognized but the password is not. I can chown a file to a user name but when I try to login as the user it won't accept the password.I know the password is correct because I can login to any of the old boxes and it accepts the password. I ran authconfig-tui to tell my RHEL box to authenticate to ldap.
View 1 Replies View RelatedI have set up my samba server. I tested from my windows side, all the public ones works fine except the [homes]. Here is my [homes] setting:
Code:
[homes]
comment = Home Directories
browseable = yes
writable = yes
The homes is suppose to let each user see his/her own home directory. But I tested at the windows side, I found that windows doesn't even prompt me about username or password, it just directly give me "not accessible" error. How do I config so my windows side at least prompt me about username/password?
I wish to download a webpage, which is secured by username and password, using WGET. The thing is there are many forms on that page and I dont know how to tell WGET which one should it send (by POST method) the parameters. I have solved it till this so far:
wget --post-data="predmet=xxx" --http-user="yyy" --http-password="zzz" [URL]
It gets through the authentication but it will not submit the form.
i am trying to write a telnet server without username/password function. how to implement such function? the source code from inetutils seems complicated..
View 8 Replies View RelatedI have set it up, but I'm not sure whether the admin username and password are set correctly. How do I confirm? Also, if someone has any links explaining the format of an LDIF file.
View 8 Replies View RelatedOk I am new to all this, I did have a server years ago but have forgotten most of what I learned. My problem is getting ftp to connect to the server. I have centos and it has proftpd but I'm lost when it comes to the conf file. I created a user in plesk but when I try to connect with any ftp software it accepts the username but rejects any password. I have tried a million combinations but I just can't get my head around this. I have used it before many years ago and managed ok but that was using webmin. I feel I've bitten off more than I can chew with this server although I have managed everything else
View 2 Replies View RelatedIam using centos5.i had installed qmail as MTA.when iam login through squirrel mail it gives login error invalid username or password.And then i tried with domain.
View 2 Replies View Relatedwhat is the default username and password to access the firefly daap server?
View 1 Replies View RelatedI installed Apache Tomcat6,every thing is running fine but facing problem in Tomcat administration webapps:- in manager webapp [URL] in this i am using username=manager password=s3cret but not it is not authenticating with these credentials in host-manager webapp [URL] in this,i am using username=admin password=s3cret
but it is also not authenticating with these credentials i edited file /etc/tomcat6/tomcat-users.xml
[Code]...
We have Ubuntu 8.04 running on our mail server and remote smtp connection does not work.
When trying to send with a client such as Thunderbird it complains about a wrong usernamepassword.
Receiving mail with IMAP and POP3 works fine through Thunderbird. Both receiving and sending mail through a web interface(horde) works.
I can remotely telnet the server at port 25 and this is the output of ehlo:
Code:
250-**server address**
250-PIPELINING
250-SIZE 25000000
250-VRFY
250-ETRN
250-STARTTLS
250-AUTH PLAIN LOGIN
code....
brand new 2 Ubantu & set up standard Ubantu compartment accessed via 1 user name only and password. 1st few times all good but now suddenly, unexpectedly password declared invalid. Had written down password so it is correct & not entry error. Not know how to reset password or bypass 'username/password log on screen' Am on an Acer 5542G with windows 7 home premium.
View 3 Replies View RelatedHow do my user change password in webmail because there is no option to change password in my webmail. How to change password in webmail. I am using centos5.
View 1 Replies View RelatedI recently installed vsftpd on my server. I noticed that users on the machine can login into vsftpd with their username and password on the machine and go to their root dir "/home/username".Now, I want to give some people a vsftpd username and password so they can upload and download files and folders to their folder, but this folder has to be in the "/var/www/(username)" folder. I don't want them to be able to go to any other folder than their own folder like "/var", "/etc" or "/home" etc. Also I don't want them to be able to login on the machine as a user, through putty for example. They should only be allowed to acces their folder with vsftpd, nothing else.
View 1 Replies View RelatedI'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
Consider this stanza for a directory on my Apache server:
<Directory "/var/www/html/mine/wedding">
Options FollowSymLinks
Order allow,deny
Allow from all
AuthType Basic
AuthUserFile "/etc/httpd/htpasswd_file"
Require user username
</Directory>
I have a x64 OpenSUSE server with two hard drivers installed. The first one is used for the / and /home partitions and the other is for backups. Ironically enough it is the backup hard drive I am having trouble with. I was having trouble writting to the drive and unmounted it to preform a fchsk, however now when ever I try to mount it I get the following error:
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Does anyone know who I can repair the drive and retrive data?
I'm using Ubuntu 10.04LTS. I'm trying to configure my chat accounts. But after entering username and password, it is asking "Enter password to unlock your login keyring". I have entered my login password. But it is saying that "The password you use to log in to your computer no longer matches that of your login keyring."
View 4 Replies View Relatedwhen i started phpmyadmin by localhost/phpmyadmin ..it ask a username and password ....so i know password will be of mysql but what will be the username when..bcoz when i installed mysql it only asks me the password ...it doesnt ask any username to enter at that time
View 3 Replies View RelatedIs there a way to SSH into a server (my home computer) from behind a proxy that has a username and password? I read about corkscrew, but I was wondering if there is a simpler way.
View 1 Replies View RelatedWhen I installed Ubuntu on my laptop, I had chosen "automatic login" . So i was not asked ofr username and password everytime I switched on. I later wanted to change the settings. So I went to systems-->administration-->login window-->security. There I disabled automatic login and I reboot the computer. Now the GUI does not allow me to enter Username and password. It says "Authorization denied" at the login screen.
View 7 Replies View RelatedI forgot my usrename and password to get in what can I do?
View 9 Replies View Related