Server :: Add Additional Web Domain For Existing Web In Rhel5?
Nov 25, 2009I have configured web server now i want add additional web domain to my web server how can i add it.
View 2 Replies
ADVERTISEMENT
Server :: Lighttpd - Name Index.html Of Additional Domain?
Apr 13, 2011For the 1st domain,say domain1. I name the index file as:
[code]...
3 identical files. It works seamlessly. On browser its webpage can be evoked. Now I add another domain, say domain2. How shall I name its index files?
[code]...
Ubuntu Servers :: Create Ubuntu DNS Server Into Existing Windows Domain
May 2, 2011I have an existing windows domain set up, Server 2008 R2.My active directory server doubles as my DNS server. I would like to add an Ubuntu DNS server to the domain. So far, I have installed the server and installed bind9, webmin, and a static IP.However, I'm not sure where to go from there, I would really like to find a way for all of the information on my Windows server to replicate to my Ubuntu server. Is that possible?
View 3 Replies View RelatedGeneral :: Migrate An Existing System With RHEL5 OS To RAID1?
Mar 7, 2011I am trying to migrate my existing system with one IDE disk , tools installation already done... without loosing informations and having to install once again every things, to RAID1 (soft) with a second IDE disk I tried to do this using somme informations given on forums but i always have a kernel Panic at the end of boot What I did:
The system is going down for system halt NOW!
login as: root
root's password:
/usr/bin/xauth: creating new authority file /root/.Xauthority
[code]....
Red Hat :: Adding A Root Mirror Drive To Existing RHEL5 System?
Nov 9, 2010I have a running RHEL5 system, which has two physical disk drives, but is currently running on a single drive of the pair. The single drive the system is running on contains a root/boot partition and a swap partition. I would like to be able to add a mirror drive to this existing setup without having to disturb the running system (much). That is, I don't want to have to completely dump, reinstall (creating the mirror on the way up), and reload from backup media if I can avoid it. I have seen procedures that go as follows:
- the "extra drive" (the one not being used as the current root/boot device) is first brought under LVM control as a root object with one physical mirror attached.
- the data from the running root/boot drive is rsync-ed over to the LVM-controlled half-mirror, and boot records added.
- System rebooted on newly created half-mirror.
- Original root prepped to be second side of LVM mirrored root, and is added in.
Can one boot from an LVM disk directly? There seems to be some question on this that came up in other lists I had read online.
Red Hat :: RHEL5 Domain Controller And DNS With Microsoft XP Client Support?
Apr 29, 2010I had tried to build up my linux box as Domain Controller and DNS for serving clients of windows xp. But it didn't succeded. Its always giving error of DNS SRV record. I already created SRV records and the service is also started. Please Send me the complete configuration of LDAP CUM DNS on rhel5.
View 4 Replies View RelatedUbuntu :: Networking / Setup A Domain And Directory Server Similar In Function To Windows Server W/ AD And Join Other Machines To The Domain
Aug 21, 2009I've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.
View 3 Replies View RelatedServer :: Add Existing Unix User To Existing LDAP?
Jun 23, 2010I have an existing unix user that some how didnt make it into the copy over to our LDAP server. How do I add an existing unix user to an existing LDAP directory? Will ldapadd work? I was under the impression ldapadd required an ldif file to work properly.
View 7 Replies View RelatedServer :: Creating Domain Form Vadddomain-domain Doesn't Exist
Apr 12, 2011iam using centos5.2.configured qmail,vpopmail. while adding domain form vadddomain<domain.co.in> At first time domain folder get created in domains directory.and also postmaster user also get created by default.And also in mysql. Now the problem is after some times or rebooting system domain get erased automatic.also in /var/qmail/users/assign file domain name get erased.
View 1 Replies View RelatedServer :: Created Domain But Not Getting Domain In /var/qmail/user/assign File?
Apr 7, 2011i had created domain but not getting domain in /var/qmail/user/assign file.also it error /home/vpopmail/bin/vdominfo abc.co.inInvalid domain name
View 2 Replies View RelatedGeneral :: When Create A New Domain On My Server It Gives The New Domain It's Own Nameservers
Jun 4, 2011I want to host 5 websites on my new virtual server so I have created 2 nameservers that point to my virtual server's IP addresses as a glue record. What confuses me is when I create a new domain on my server it gives the new domain it's own nameservers (ns1.thenewdomain.co.uk etc) do I need to change these records so they use the nameservers I created earlier? If I do? Which particular records should I change? I'm running a Unix virtual server with a Plesk control panel.
View 2 Replies View RelatedServer :: Connecting To A Samba (not On Domain) From Windows Domain Pc?
Jun 27, 2011i need to allow window domain controller user to use file share of linux.windows DC user can see the share file and directories of linux file server but not able to access.
below is brief--
I have a Linux machine which is on my network but not on my domain. I have configured SAMBA FILESERVER for file sharing purpose. I have a Windows XP PC which is on the domain(windows server) that I am trying to connect to a share on the Linux box. I supply my credentials but regardless of which login I use I always get Logon Failure. I have created an account on the Linux machine with the same user name and password as my domain account but so far no luck. Can I connect from a domain PC to a non-domain Linux box? Is there something else I should be checking?
Server :: Domain Controller On A Current Windows Domain?
Dec 30, 2010I'm working for a smallish non-profit that has gone through some recent growing pains. We have two sites that are currently without a domain controller, and no money for MS licenses, so I was thinking of trying to add a couple of additional Linux machines (we already run Linux for web services internally, and I've set up a test case previously to see if I could get a server to join the domain, which was a success) and was trying to find out if I can get them to act as Domain Controllers without replacing the domain. The main issue that I'm having at those locations is drive mappings are not happening correctly against our DFS file servers. The one other location that had this issue had it go away when we added a local DC. The domain is a Server 2008 domain.
View 2 Replies View RelatedUbuntu Servers :: Active Directory Domain Integration - Allow Domain Users To Authenticate Server And Access File Shares Using Samba
May 13, 2010The company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
Server :: Forward A Domain To Another Domain With Musking?
Aug 3, 2010My customer has a domain hosted by me and he has another domain hosted by another isp. He would like to have this domain am hosted to be forwarded so thwt upon entering the url he should have the website which is hosted by this other ISP displayed (the url of the website be musked). How do i configure my DNS at achieve this?
View 1 Replies View RelatedServer :: Redirection Of A Domain To A Subtree Of Another Domain?
Aug 10, 2010I need to redirect a domain to a subtree of another subdomain , for example : [URL] should be redirected to [URL] How should I do this ?
View 1 Replies View RelatedUbuntu Servers :: Buying Domain / Hosting Web Server / All Domain Registers Come With Email Or Just Email Forwarding?
Mar 29, 2010I am thinking about buying a domain name and hosting my web server.
I have seen pricing from $8 to $30 a year. Any favorites from fellow ubunters? Also this whole "whois" thing scares me, if I am correct my information I enter when buying the domain is enter into some big pool of information. People can find this information out and dig up important information. url Can I prevent this with private Whois or how do I set it up? This website examples some of my fears with this whole WhoIs thing, url whois/Private-Whois.html Does most/all domain registers come with email or just email forwarding or both? How does that work? At this moment, my only question about Web Hosting is how do I get Website Statistics as in: Stats, web analytics, web traffic stats and more? I will be web hosting through Ubuntu 9.10 gnome.
Ubuntu Servers :: Access Web Site When Site's Domain Name / User's Local Server's Domain Name Are Same
Feb 18, 2010In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies View RelatedServer :: Creating Partition For Additional Lun?
Apr 26, 2011I am using NFS to mount large LUNs from my SAN.I have one already setup and configured. I am adding an additional partition from the same SAN but I am confused on the setup. I know the LUN is connecting to my NFS server correctly because I see it listed in my /proc/scsi/scsi as an additional LUN. What I don't see is the drive being displayed in fdisk -l. I did notice one thing though, when I disable the host mapping from the SAN, my disk information changes from /dev/sdb TO /dev/sdc (see changes below)
Without host mapping to SAN:
Disk /dev/sda: 13999.0 GB, 13999026470912 bytes
255 heads, 63 sectors/track, 1701951 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
Red Hat / Fedora :: Adding Additional Hostname To Another Server
May 21, 2010i had 1 server and its hostname is resolving fine.
i purchased 1 vps and its hostname isnt resolving.
for server1 say hostname is server1.domain.com
and for vps i add server2.domain.com
and when i ping my server2.domain.com i get Host Unknown error.
do i add Hostname and make it resolve in VPS.
i want to use hostname like server2.domain.com.
i want both server to have common domain name but diff hostname.
Ubuntu Installation :: How To Load Additional Modules (Server)
Sep 17, 2010I've been playing with some intel server board and they provide a type of fakeraid which is called Embedded Server Raid Technology 2. Since Intel officially support RHEL and SLES on their servers, they provide drivers/modules for this fake raid (which supports raid 0, 1, 5 and 10). I have installed RHEL before on these severs and redhat's installer has the ability to load additional modules (via a boot command linux dd).
While intel doesn't provide the modules for other operating systems, they provide a library where people can build their own module for their kernel. I managed to build this module called 'megasr' (for now I've built it for kernel 2.6.32-24-generic which is my testbed at the moment but I would eventually build it for box i386 and amd64 for both server and desktop versions) and load it on a system which is installed on a single drive.
We are able to load it successfully and see the raid 5 as a single volume and access it (partition, format and copy data to it) and all its functions (work in degraded mode, rebuild, etc) work fine but my main goal is to actually install such volume as my main boot volume (similar to how its possible with RHEL or SLES). Is this possible? Load additional modules during the installation that will be present after the installation is finished?
Programming :: Filter Out The Additional Packages That Exist On A New Server?
Apr 15, 2010I've got two files. They both contain package names. Is there any way I can go through the package list on one file, and search to see if each package exists in the other file? What I'd want to do, is if the package name is found in the the main file, then go to the next line. If its not found then print that package name to another file.
I know you can use diff, but it doesn't seem to be that straight forward. As I understand it diff searches line by line, so if line one doesn't match line one in another file, then it prints it out. That's not exactly what I want.
I just really need an easy way to filter out the additional packages that exist on a new server. If I have a list of packages that aren't on the original server, then i can just delete them.
Not sure if I've made any sense but there must be a quicker way to do what i need to. It would take me ages to scan manually through the package names in each list, and highlight the ones i dont need.
Networking :: Can't Ping Server From Client But After Run In Server RHEL5
Nov 27, 2010I have 2 ethernet cards but when I look at the Network configuration in "Hardware Tab" I have another acx wireless network. How to delete that because In my system Idon't have wireless card..probably installed before but want delete it now.
[code]...
then windows can ping server and resolve ip address and browsing Internet but can't ping [URL]... result is Request time out. ICMP already enabled in iptables.
Debian :: Installing Additional MIBs For Specific HW (SNMP Server)
May 8, 2010I have debian Lenny as an server I would like for monitoring of some network components ( switches, printers, routers ... ) and at
/usr/share/snmp/mibs I have
/usr/share/snmp/mibs# ls -l
total 1844
-rw-r--r-- 1 root root 17455 2008-12-16 18:22 AGENTX-MIB.txt
-rw-r--r-- 1 root root 36576 2008-12-16 18:23 BGP4-MIB.txt
-rw-r--r-- 1 root root 36959 2008-12-16 18:23 BRIDGE-MIB.txt ....
ls -l | wc -l shows 66, what means 66 differen mibs.
snmp related packages I have installed are as :
dpkg -l | grep ii | grep snmp
ii libgsnmp0 0.2.0-2.1 an SNMP library implementation based on glib and gnet
ii libsnmp-base 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) MIBs and documentati
ii libsnmp-perl 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) Perl5 support
ii libsnmp15 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) library
ii snmp 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) applications
ii snmpd 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) agents
My question is, how I can install additional mibs ( for Cisco, Procurve, etc ) for other hw I could have ? What is procedure. I browsed debian package base and I could not find some more packages related to snmp that could supply more mibs.
Server :: Unable To Mount Additional Harddrive From RAID Volume System
Apr 8, 2010I believe server section is the best when speaking of RAID stuff...
I have the following situation:We have a DELL T3400 with embedded fake raid on it. I dont know exactly how the system was setup (I wasnt here at that time), but the RAID was enabled in bios and while booting, the two harddrives would be seen as members of intel raid volume0 (RAID 1 mirror). I am not sure if the software raid was actually properly configured in Linux (Fedora 9) and if the OS was reconstructing the whole raid or it was just the bios part that was mirroring the /boot or just some parts of it. Frankly I find these hydrid raids very confusing.Some bad disk manipulation from my part caused the server to crash, but I was able to recover and boot just with one hard drive after using fsck.
I decided to get rid of the raid as it's not the right solution for the application we need it for and decided to go for a traditional single harddrive system and to use Ghost for Linux to clone to a spare disk when backups are needed.So I installed the latest Fedora 12 distribution onto another harddrive and disabled RAID in bios (changed from RAID ON to autodetect, which is the only other option).
Here is what I have now:
/dev/sda has the newly installed fedora 12
/dev/sdb is an empty harddrive that I would use as an intermediate
/dev/sdc is the old harddrive member of intel raid volume0
sdb was partitioned into sdb1 sdb2 and sdb3 and I created an ext3 filesystem on sdb2. The hard drive belonging to RAID volume0 (sdc) has a lot of work done on it and I would like to be able to recuperate the files to the new disk (sda). I cannot mount that old harddrive while in fedora 12, as it sees some unknown raid member filesystem on it probably assigned by the intel raid chip.
So I decided to do it from the other side: to boot from raid volume 0, and from there mount a third intermediate harddrive (sdb) onto which I would copy the documents and then mount the same harddrive from the newly installed fedora 12 and copy those documents from that intermediate harddrive.I can mount /dev/sdb2 from fedora 12 fine and copy stuff to and from it, but not when I boot from the RAID volume 0 harddrive (sdc) with fedora 9 on it. It keeps saying that the partition in question (/dev/sdb2) is an invalid block device.I am stuck here, as my knowledge in this sort of things is very limited.If somebody can indicate me how to recuperate files from that old raid harddrive onto the new fedora 12 drive, I would appreciate a lot.
CentOS 5 :: Easiest Way To Mirror Existing Server Setup On A New Server?
Jan 13, 2011We have two CentOS 5 servers in production (web and database). We are setting up a single staging server that will mirror the configurations of these servers as closely as possible. What is the easiest way to ensure the exact same software and configs as the production servers are setup on the new staging server. Our contracted data center provider has already informed us that they do not perform images and NO we do not have physical access to the machines. It is undetermined whether we will be virtualizing the staging server into two virtual servers yet, so for the purposes of this post lets assume we are not. I'm seeking a faster/more precise method than doing this by eye and hand.
Some information on our web server code...
Server :: Add New Service On RHEL5.4
Aug 30, 2010I'm developing simple transaction switch using java socket programming and running operating system RHEL5.4 . Now it is completely done and working fine. So I have written the simple shell script to run it on background.
[Code]...
Server :: Creating LV More Than 8TB In RHEL5.3?
Sep 2, 2010how can we achive more than 8TB size for one LUN.?I am getting following error..
[root@storage ~]# mke2fs -j /dev/VG01/data
mke2fs 1.39 (29-May-2006)
mke2fs: Filesystem too large. No more than 2**31-1 blocks
(8TB using a blocksize of 4k) are currently supported.
Red Hat :: Implement CBQ In RHEL5 Server
Sep 25, 2010I want to implement CBQ in my RHEL5 server so that i can manage my BW.
View 4 Replies View RelatedGeneral :: Run Windows 7 And Rhel5 Server On Same Pc Under Xen?
May 21, 2010I have rhel5 running ok and windows7 running ok, and currently access both via grub (both os are on separate disks) I want to be able to switch between both without rebooting. xen is installed and working but I cannot configure windows to run as a guest as xen wants an iso or img file.
View 1 Replies View Related