Server :: MP-BIOS Bug - 8254 Timer Not Connected To IO-APIC

Feb 3, 2011

The "MP-BIOS bug: 8254 timer not connected to IO-APIC" error message shows up on boot on at least one of my RHEL servers, and I'm not quite sure what to make of it. My understanding of the situation is that the timer is located elsewhere on the motherboard than where the kernel looks for it. Is this correct?

I've come across people suggestin one should disable APIC by adding "noapic" to the kernel boot options, but which consequences does this imply - in SNP setups only one CPU will be used by the kernel?

View 2 Replies


ADVERTISEMENT

CentOS 5 :: MP BIOS BUG : 8254 Timer Not Connected To APIC IO After Upgrade To 5.4?

Oct 23, 2009

I have some virtual machines running with CentOS 5.3 (32 bit) and everything works as expected. To test a possible upgrade I took one of then and did yum clean all yum update after rebooting I get a kernel panic with the following message:

MP BIOS BUG : 8254 timer not connected to APIC IO I know that I can change the boot command not to use APIC and after that the machine boots again but I doubt that there has been any change to the virtual APIC implementation during the upgrade of the OS. Is there anything that iI should exclude from upgrading while working in a vm? I use VMWare Player 2.5.3 build-185404 on a 64 bit Ubuntu 9.04 as host.

View 5 Replies View Related

Fedora Installation :: Timer Not Connected To IO-APIC - Kernel Panic Not Syncing

Aug 1, 2009

I was able to copy the iso file and tried the installation however I stubbled upon the same problem I had when I tried installing Fedora 11. The message I received was "(1) (0.048001) MP-BIOS bug:8254 timer not connected to IO-APIC (2) (0.064001) Kernel panic-not syncing:IO-APIC + timer doesn't work Book with apic debug and send a report. Then try booting with the 'no apic-option'.

View 4 Replies View Related

Software :: Kernel Panic Not Syncing - IO APIC+timer Doesn't Work

Dec 28, 2010

After searching other similar posts I have not found an answer. I have recently installed Ubuntu 10.4.1 after reformatting the computer from the previous Ubuntu Edgy. When rebooting get this msg (in title). I used the live CD to get into the grub files to see if I could ad 'noacip' option. But was looking for 'menu lst' file and found none. Currently when I boot I don't get any menu list and therefore no options at the bottom. Should be an easy problem to resolve Powerspec B364/160gb/856Ram/ATI raedon 200 express onboard/Geforce 8400GS PCI-e

View 8 Replies View Related

OpenSUSE Install :: Kernel Panic "not Syncing:IO-APIC + Timer Doesn't Work" - 11.1 Installation Failed

Dec 21, 2008

I'm using openSUSE 11. I'hv tried to upgrade it to 11.1 with a x86_64 installation DVD (as I did earlier), but it failed. It showed the following message:

[Code]...

eventually same type of problem happend when I was trying with fedora 10... fedora 9 and openSUSE 11 install smoothly in my 64 bit machine (compaq SR1730IL, Intel pentium 4, 524 and 1GB DDR2 RAM)

View 5 Replies View Related

Debian :: Dual Boot Installation Stalls - Timer Not Connected

Jan 25, 2010

I am new to linux and I am attempting to establish a dual boot with Windows Vista 32 Bit and Linux Debian 503 i386-netinst. When I place the install cd into the cd drive and boot from the cd a problem occurs at "Booting the kernel."

A message appears:
[0.116007] ..MP-BIOS bug: 8524 timer not connected to IO-APIC
Then the installation just "stalls" and never moves past this point.

View 1 Replies View Related

Server :: Tomcat 6 Error: Timer Already Cancelled

Jun 15, 2010

I started seeing error log entries to this effect once we ported a Tomcat webapp, which connects to a remote database, from Tomcat 5 to Tomcat 6.0.26, but it seemed relatively harmless until now. The error we got at first was:

Code:

May 5, 2010 2:36:44 PM org.apache.catalina.loader.WebappClassLoader
clearReferencesStopTimerThread

SEVERE: A web application appears to have started a TimerThread named [Timer-7] via the java.util.Timer API but has failed to stop it. To prevent a memory leak,the timer (and hence the associated thread) has been forcibly cancelled. A restart seemed to cure the server at that point. But now it has died silently: though the process itself was running, the service become unavailable. Entries like this were found in the logs:

Code:

06/15/10 15:05:47.685 EDT -0400 id=1 Error acquiring database:
java.lang.IllegalStateException: Timer already cancelled.
at java.util.Timer.sched(Timer.java:354)

[code].....

View 2 Replies View Related

Software :: Cafe Con Leche Client / Does Not Connect To Server To Show The Timer Automatically?

Jun 2, 2010

i have a problem with one of my PCs which refuses to run the CCLc timer on its screen, i have tried to run the application so many times but every time i run it it does not connect to the server to show the timer automatically as the other PCs do,therefore the client cannot know how much he/she is supposed to pay.this forces us to manually time the clients that are using that PCs.

View 1 Replies View Related

CentOS 5 :: Time Error In 5 Server - PCI: Setting Latency Timer Of Device 0000:02:02.0 To 64

May 11, 2010

What can be the cause of this error.

dmesg | grep -i time
ACPI: PM-Timer IO Port: 0x408
Calibrating delay using timer specific routine.. 4658.19 BogoMIPS (lpj=2329098)
Using local APIC timer interrupts.

[code]....

View 7 Replies View Related

Fedora :: Disable Apic In Grub?

May 28, 2010

Can somebody tell me how to disable apic in the grub? I've already edited the grub text file and added "noapic" in the kernel line. Now is there something similar to "sudo update-grub" that I have to run (I ask because it's not saving when I reboot)? I know in ubuntu you have to run that command in order for the changes to the text file to take place in the grub. Is there a command similar to that for Fedora?

View 2 Replies View Related

Programming :: Socket And Timer Programming - Server Doesn't Execute Any Msg Which Client Sent

May 16, 2011

i have a server program which accept multiple client connection and am using polling. like every 2 secs it will look to client whether any data is received after it binded. i have used setitimer but there is runtime error i got.. the server accept all client connection but doesn't execute any msg which client sent.

#include<stdio.h>
#include<stdlib.h>
#include<sys/socket.h>
#include<sys/types.h>
#include<netdb.h>
#include<unistd.h>
#include<pthread.h>
#include<string.h>
[Code]....

View 1 Replies View Related

Fedora Installation :: IO APIC Resources Couldn't Be Allocated

Oct 12, 2009

i am trying to install fedora 11 kde on my desktop, but after restarting computer, then appears error message "IO APIC resources couldnt be allocated, buffer I/O error on device sr0" i am not sure what to do next?

View 8 Replies View Related

Fedora Installation :: 11 Install - Black Screen - IO Apic Error

Jul 9, 2009

I'm trying to install Fedora 11 on a Dell Latitude c810 (PIII 1ghz, 256mb ram, GeForce2 GO)

When trying to boot from the Live CD it goes to the first fedora boot screen where it counts down from 10 then tries to boot.

It then says "IO Apic resources could not be allocated" then moves onto a fedora loading bar which completes... but the next screen is completely black, I've tried letting it stay there for 10 or so minutes but nothing happens.

View 7 Replies View Related

Server :: Check A User Connected From Server Using Internet Or Where He Visited?

Nov 12, 2010

I'm using a linux server where nat server is running. Local user are connected from this server. So is there in tool that i can check that local user getting internet? or how can i check that a user connected from linux server using internet or where he visited?

View 1 Replies View Related

Server :: Access Ubuntu File Server If It's Connected To A Router?

Feb 13, 2011

I want to access files on my ubuntu server wireless. Is there a way I can do that? I'm sorry if this is a stupid question, but I'm kind of new at this whole server thing.

View 5 Replies View Related

Fedora :: IO APIC Resources Couldn't Be Allocated Error When Booting Off FC11 Live CD?

Aug 28, 2009

FC11/KDE-live Cd

The error is below;

apic is getting timing mode sailed. IO apic resources couldn't be allocated

I fed the kernel commands, noapic , noioapic but that didn't work .

View 1 Replies View Related

Ubuntu :: Server Is No Longer Booting To The Bios?

Mar 17, 2010

i have a peguin computing 130 server running ubuntu server 9.10 and today i open the box to removed one of the hard drives that wasn't being used and the server is no longer booting to the bios.

i have removed the ram and placed it back but notting is showing up. Every time i turn it on it doesn't show anything not even the bios.

View 4 Replies View Related

Server :: How Fast Is Network Connected To Server

Dec 28, 2010

how can I check how fast is network connected to my server ? I mean upload/download. I have an access only to command line. Is there any nice command for this?

View 2 Replies View Related

Fedora Installation :: BIOS Setting - Building New Server?

Jan 31, 2009

While building my new server I grinded ta hold shortly after inserting the FDR10 DVD.

Hardware:
Chenbro es34069
Albatron KI690-AM2
AMD Athlon X2 64 4850E
IDE 2.5" HD (master)
IDE Slimline DVD (slave)
4x SATA II swap (still empty)

It stops at the message "net: Registered protocol family 2" but in one of my desperate attempts I changed almost every setting in my BIOS (updated to 1.07) and all of a sudden it passed on. Stupid enough I figured it would be a small effort to find the setting and figure out the problem, so I changed them one at a time after loading the defaults....

View 6 Replies View Related

Ubuntu Networking :: Cannot Authenticate With Routers BIOS From Server

May 14, 2010

I want to make changes on my router bios for my server I have to go to my windows booted laptop rather than just 192.168.1.1 right here at my server. I only have to do a 360 in my chair and I am at my laptop but I don't want to. Everytime I type the gateway ip it reads off the name of my router and looks fine. But I enter my authentication info and it just returns the login window blank... something ubuntu-side?

WRT160v2 linksys wireless N router (Of course I have cat 5 running to my server)
Ubuntu 10.04 LTS running desktop ontop (because I am still learning how to navigate the console)

View 3 Replies View Related

Fedora Installation :: F11 Bricks Server Unless BIOS Changed From AHCI To IDE EMULATION?

Jun 10, 2009

Server has DQ35JO board, 8GB memory, multiple SATA hard drives. It was happily running Fedora 10, and Fedora 9 before that. I downloaded and burned the F11 DVD, booted it, did an install which is:

-- delete the LVMs
-- create a 200 MB /boot on ext3, the rest of /dev/sda on ext3 as /
-- reformat the swap partition on /dev/sdb1
-- leave the other file systems alone (they are all ext3)

I chose no optional packages and let it install. It finished normally and got to the "click to reboot" screen. Now, my server is completely bricked. When I power it up I get a blank screen with a blinking cursor. I cannot even get to the BIOS, or boot my Fedora DVD, much less boot the boot drive.

View 6 Replies View Related

Fedora Installation :: Install F13 On A Server That Has A 2-disk RAID Setup In The BIOS?

Jul 8, 2010

I'm attempting to install F13 on a server that has a 2-disk RAID setup in the BIOS. When I get to the screen where I select what drive to install on, there are no drives listed. The hard drives were completely formatted before starting the 13 installation. Do I need to put something on them before Fedora will install?

View 3 Replies View Related

CentOS 5 :: Edit Bios - Compaq Evo 5.4 Web Server Fails To Restart From A Power Outage

Jun 7, 2011

I have a small problem on my Compaq Evo Centos 5.4 web server. The web server runs just fine, the problem is it fails to restart from a power outage. Simple edit the BIOS. No! For a reason I can't think of the keyboard stops working after a few key strokes following the F10 to enter BIOS setup. Then its a power cycle. If left to BOOT the PC and keyboard are fine. After hearing about viruses which get to the BIOS I will ask can NIX get that far so I can adjust the Power ON?

View 4 Replies View Related

Ubuntu Servers :: Get My Website Connected To Server?

Feb 25, 2010

So I gave up on the mail server Idea as that was too much of a headache.

So I was wondering as I have registered waloshin.com with godaddy.com how can I get an apache hosted website to appear on that domain from my server?

Do I have to configure BIND9 to do so?

While going to http://whatismyipaddress.com/ it does say that my ip address is static: Assignment:Static IP

View 9 Replies View Related

General :: Get List Of SSH Users That Are Connected To Server?

Jan 6, 2010

My system is SUSE 11.1 I want to see who is connected via SSH. For instance, I have users connected using FileZilla. I can see in th e/etc/var/messages that they authenticated/connected, but I can't see if they have since disconnected or not.

Also, about 3 years ago I used to use Fedora for my SSH and in the sshd_config I'd make custom logs for each account, specify which user accounts were possible, port number, etc, etc. Is this possible to do using the SUSE linux? Any links on how to do this on suse? I haven't used linux in 3 years and can't find my old sshd_config files to take a glance...I did look at the sshd_config on SUSE, but it looks very different.

View 6 Replies View Related

General :: Find Out Server Is Connected To SAN Storage?

Apr 10, 2011

We have near about 90 RHEL servers. I want to find out which servers are connected to SAN [HP-SAN] storage???? Because many of them are having local hard disks.

View 2 Replies View Related

Debian Installation :: Server Knocks Out Broadband When Connected

Dec 27, 2015

I have bought an Intel NUC pc with Debian with debian-7.9.0-amd64-netinst installed. After using for a short while I have noticed that it makes my broadband stop. Once I unplug it the broadband is OK again. I have tried everything but can't find a solution.

View 14 Replies View Related

Debian Configuration :: Connected To Internet Yet Server Not Found?

Sep 20, 2010

I just reinstalled debian on my computer, I've had it working for a long time, only difference is I used to have Cable Internet and now I use DSL. Anywho, I reinstalled debian from the kde CD on the debian website, it auto-configured my network out of the box. My network is connected to the computer, pinging google works perfectly, and ifconfig shows that eth0 is working correctly without any errors. However on both Konqueror and Iceweasel, every time I try to connect to a website, it tells me the server cannot be found. Basically it acts like I don't have internet. Using the terminal works though, I have installed KDE-FULL from the terminal and wicd, so I know I do have internet. I don't know what it could be, like I said, I installed from the cd and this happened. Maybe there's a bug on the KDE debian cd

View 14 Replies View Related

Ubuntu :: Install Printer In Connected In Print Server?

Apr 22, 2010

a newbe one, but its if my fifth try in using ubuntu for working with Architecture, so... my problem is...I have a plotter (xerox 2230ij) connected in a print server, i tryed to connect in lpt1 port and was sucessful with HP 750 plus driver... so.. yay! but my original intend is to connect in print server and all the computers (windows/ubuntu) use that.But when i connect in PS, i cant see the plotter, but i can acess the PS (Dlink)so.. what i have to do, to make thing working well? and i have virtualbox with windows XP, can XP acess that plotter as well?here a small scheme of my connections...


Code:
router -----------------------------------
| |

[code]...

View 1 Replies View Related

Ubuntu Servers :: Connected To Openvpn Server But No Access

Jun 2, 2010

i have setup Open VPN on Ubuntu 9.04, generated the key and have it running successfully on the server end. I download the open vpn client for windows, copied over the key ca and cert file and connected to the erver. All went well and the open vpn gui said its connected to the server (green comp icon in taskbar) and it said in a ballon it assigned me an ip of 10.8.0.6 it all looks good... BUT i have no vpn access... The virtual adapted in windows is not able to pull an actual IP/gateway and such...

[Code]...

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved