I want to access files on my ubuntu server wireless. Is there a way I can do that? I'm sorry if this is a stupid question, but I'm kind of new at this whole server thing.
View 5 Repliesi have setup Open VPN on Ubuntu 9.04, generated the key and have it running successfully on the server end. I download the open vpn client for windows, copied over the key ca and cert file and connected to the erver. All went well and the open vpn gui said its connected to the server (green comp icon in taskbar) and it said in a ballon it assigned me an ip of 10.8.0.6 it all looks good... BUT i have no vpn access... The virtual adapted in windows is not able to pull an actual IP/gateway and such...
[Code]...
I have an external hard drive connected to my router. From Windows I can access it, but from Ubuntu I can see the hard drive, but when I try to access, I'm asked for a password. However my network does not have a password neither the hard drive.
What must I do?
Server details:
OS: Linux RedHat
DHCP: Static IP set to 192.168.1.101
sshd_config: Enabled for port 22 for ssh
Connected through wire to the Linksys router
Router:
Type: Linksys BEFW11S4
Port forwarding enabled for port 22 to IP 192.168.1.101
Client:
Windows 7
Interface: PuTTy
Host: 192.168.1.101 on port 22 through SSH
This always gives an error "connection timed out". SSH directly on the local Linux works fine.. Seems basic but had been struggling over this for past 3 hours to no avail so thought of posting it to the experts.
i Cannot access Server behind the linksys router via ssh
Server details:
OS: Linux RedHat
DHCP: Static IP set to 192.168.1.101
[code]...
Is there a way to make the (router's) USB port to work in OpenSUSE? I have a external HD were I would access files from when connected to the router with the shareport utility but it only works on windows. I was wondering if it could work in wine? And how could I do it?
And how can I make a network? I have never made a shared connection between computers. I don't know the correct term but I would like to share files with my brother and sister which I just converted from Ubuntu
I would like to determine what computers are currently connected to my access point/router via the command line in Linux.
View 2 Replies View RelatedUsing Ubuntu 10.04 LTS.
I have an intranet server behind a NAT router. Very standard linksys router home setup. The server has a static IP. I used port forwarding in the router to use SSH and log into the server remotely - it works OK.
I want no one outside my home network to access any webpages on the server unless they're authenticated.. I know I could port forward like with ssh but with http port 80 and then see webpages , but again this would open it up to anyone with my cable modem's IP - wouldn't it?
I need a secure way like SSH that requires a password before anyone could access port 80 and http from the server from a remote network.
How do I do this? And on the local network people can get served pages normally as usual. Just remote would need authentication. Must be commonly done(?)
Recently I installed Debian on one of my machines to act as a router and file server. I'm pretty comfortable to work from the the command-line (ssh), still I can't shake of the felling of wanting a web GUI for configuration. Since I haven't found anything that can be installed on Debian (don't like webmin), I either need to do my own GUI or go the virtualization way.
I was thinking of running some kind of router distro and virtualize a file server distro or just a regular distro. I don't know maybe this virtualization path is just a bad idea, I dunno, so I ask for your advice and comments.
I just finished setting up my small server, however I realized that no one can connect to it from the outside. The reason being is that my router is assigning internal ip's and dyndns is linked to that. I need port 80 for the Apache server, but if I have the router forward that port to my particular ip, won't it screw with everyone else's internet too?
View 5 Replies View RelatedI installed Apache server with Debian 5.0.2 Lenny. I am trying to write a script which would analysis web log files. I found the log files on /var/log/apache2. There is an access log file, `access.log`. My question is what configuration file determines the location and the name of the access log file. How can I change them? I used CustomLog in /etc/apache2/apache2.conf like below.LogFormat ": %h %l %u %t "%r" %>s %b" common
CustomLog /home/test/my_log_file common Apache2 generated /home/test/my_log_file. But no logs were written in the file even after I run `/etc/init.d/apache2 restart`. Ichanged the log file location. It still didn't work. However, Apache2 still wrote logs in the file `/var/log/apache2/access.log`
I am thinking of moving the router behind a server and connecting the server directly to the internet via a modem. Are there any security issues related to doing this? or other things I should be aware of. Iptables are implemented on the server blocking access on unused ports.
View 2 Replies View RelatedIm new in linux i want to configure my redhat machine as both router and transparent proxy!
View 1 Replies View RelatedI'm using a linux server where nat server is running. Local user are connected from this server. So is there in tool that i can check that local user getting internet? or how can i check that a user connected from linux server using internet or where he visited?
View 1 Replies View Relatedhow can I check how fast is network connected to my server ? I mean upload/download. I have an access only to command line. Is there any nice command for this?
View 2 Replies View RelatedI'm going to start a new thread because previous searches have not totally satisfied my question. I've read all day about doing this but each inquiry leads to discussion of configuring the router. I am also not network savy. I would like to set up an FTP server on my home computer (presently Ubuntu 8.10). I have only one computer. I am using DSL with my telephone line for internet connection. I do not use a router.
Is it possible to do this with no router and only a DSL ISP connection?
i was install ubuntu server with desktop and when i try to open my ip adress in browse it show me this
Forbidden
You don't have permission to access this file on this server. Cheyenne/2.2.8 Server at localhost Port 80.how can i fix it.My IP address is 88.163.109.209, you can see the directory forbidden error if you type in my IP address.
What is the best option: leave the ADSL modem as the router of my network, or use a Debian Linux server in place?
Info:
* there is high traffic on my network (at work time);
* 7 PCs on the network;
* Debian Linux server: PC - Intel Pentium IV 3.06 Ghz - 2 GB RAM.
At our company we have a central server with client files. This server has a SSH server installed, and through Nautilus all employees can access the files. However, I have a few questions:
1. Most employees need access to all folders, because they might use them at some point in time. However, I want to make sure they are not accessing things they do not need. How can I do this? For instance, if somebody copies all of the folders to his/her computer, I want to be able to see this in some sort of log. Can this be done? Copying and accessing in general is what is of my concern.
2. Some employees only need access to specific folders. Can this be easily configured with SFTP?
3. Some also use SSH and type commands which I want to check every now and then (e.g. to make sure an intern is not again copying information or accessing folders they should not be in). What is a good way to do this?
Can you make a ftp server behind wifi router?802.11g
View 3 Replies View RelatedI have a file 'my_file.txt' stored on 'myserver1.col.edu' Now, I am using a different server 'myserver2.col.edu' to do some work and I want to access 'my_file.txt' on 'myserver1.col.edu' to read (possibly edit) WITHOUT physically copying the entire file across. Is there a way to do this - perhaps through ssh?
View 2 Replies View RelatedI am new to linux and know some basics, no proper knowledge of servers. I want to know is that how can i access my companies "fileserver" from linux (gui as well as from cmd line). This file server i can access easily from windows machine but i don't know how to open/access file server from linux machine..If can tell what tools are needed and also but is the process from command line.File server is windows server and my machines is Redhat linux.
View 3 Replies View RelatedI am trying to access log file which located in /etc/log/apache2. I could get into the directory using `su`. I was able to run ls command under the directory and everything was file. I could run a command,
ls -d /var/log/apache2/*
However after I switched to my account, I got an error. sudo ls -d /var/log/apache2/* ls: cannot access /var/log/apache2/*: No such file or directory
I want to use this command in a bash script to get a list of log files. Should I write the script as root and run it as root?
I'm running a Debian/Samba PDC on a Windows network. We desire to monitor a few network shares, so that whenever a change is made to a file in those, we have a log of who did it and when. Some capability of seeing what the change was, or a way of reverting it, would be nice luxuries. But username and timestamp are most important, if possible.
On the debian forums, someone advised using Tripwire for this purpose. didn't give much other advice about it so I kind of struck out on my own researching tripwire. got it installed, played wth it, and found it problematic, to say the least. It seems a bit much on the complexity and security side, and it seems more oriented towards maintaining system integrity, than monitoring documents. So far I've not managed to get a policy update working on account of a cascade of errors about a few hundred files under /proc disappearing, despite no changes to the system.so I'm wondering if anyone here has advice.
1. Does debian have this sort of functionality built in? is there a system log I can parse to get this information?
2. Is tripwire the right application for our purpose?
3. Is there anything better suited, more user-friendly or more parsimonious. I don't need something to monitor all system files, guard against intrusion, and make me cups of tea, just to monitor a few folders that I specify
I'm trying to find a file access honeypot for our Fedora server.That is, if a local file is accessed, it should notify someone. Plain and simple..
View 8 Replies View RelatedI am trying to set up an ampache server using apache as the webserver. The instructions have the following line as one of the requirments: Your webserver has read access to the /sql/ampache.sql file and the /config/ampache.cfg.php.dist file..I have essentially zero experience with apache, and I'm not sure how to grant read access to a file.
View 1 Replies View RelatedI have an Ubuntu server running with lighttpd.
The file, access.log has utilized 73GB at: logs/lighttpd/, which contains data since 3 to 4 years (approx.)
So, i need to have only last 6 months logs in the file and the rest to be cleared.
I'm unable to ftp from one server to another server.
Getting the below error:
put: Access failed: 553 Could not create file
ftp script :
USER="test"
PASSWD="test"
HOST="10.43.45.00"
echo "starting Secure FTP ..."
lftp -u ${USER},${PASSWD} ftp://${HOST} <<eof
cd /home
lcd /home
put /home/test3.csv
bye
eof
echo "I have get all csv files
iam trying to sync file server data into backup server machine by command- rsync -avu path/of/data ipaddress-of-backup-server:/path/where/to/save after running it ask for root password and manually it is successful.but i want to make it automatic.for that i also tried cronjob and also generated authentication key but iam not successful in login automatically..anybody know how to authenticate root to login for storing data in backup server.
View 14 Replies View RelatedI installled it 2 weeks ago. How do I access the windows sharing from the fedora box. My windows network is on AD that runs on Win 2003 Server.? I can ping to the server, but how to access the sharing? I had look at the forum and some are very technical.
View 4 Replies View Related