Server :: File Transfer From Fedora Desktop - Permission Denied
Nov 26, 2010
I have a ubuntu server 10.04 with LAMP installed. I also have ubuntu 10.10 on a laptop and can copy files to the server fine. To keep my website uptodate, I usually use Filezilla without any problems. I have just installed Fedora 14 on an old desktop and set up "my stall" ok. The problem is that I cannot copy any files from Ferdoa to the server due to:-
Response: 550 Permission denied.
Error: Critical file transfer error
I have tried to change the directory on the server "/var/www" using chmod -R 775* and chmod -R 777*, but it makes no difference, the file transfer still fails.
And I added umask 022 to the user login script problem I have: I login with user and password that exists as a local user on my suse machine. I can read and download from my homedirectory, but I cannot upload with filezilla. Then I get the error: 550 permission denied critical file transfer error
I have got centos 5.3 running on my system. I have installed vsftpd and created a separate folder to upload files (upload folder created in/var/ftp/pub). From my client end I can download ftp files but when I try to upload files from my client I get a error message 550: permission denied. The upload folder has full permission ie 777. Checked the ftp config file everything looks ok.
I am trying to ssh into my server that I do have ssh installed on and have followed instructions carefully on ssh_config. My problem is that when I try to ssh from my desktop PC terminal into the server with ssh shack1@192.168.1.80, I get in return, shack1@192.168.1.80's password: I type in the password and I then get, Permission denied, please try again. I am putting in the correct password and am stumped......Please excuse my ignorance in this I have been using Ubuntu Desktop for 2-3 years and have been doing decent and am trying to venture out a bit.
Im trying to run a program but my system won't let me.i used to be able to run executable files without a problem but i can't anymore when i double click the file i get "there is no application installed for executable files" i am unable to check "allow executing file as program" in file properties there is a script file which runs the program but all i get from the terminal is "permission denied"
I'm trying to set up a Fedora 11 server so that users have only SFTP access. The relevant lines from my "/etc/ssh/sshd_config" are:
[Code]....
I can log in okay, I can type "cd /" and "cd upload", but when I try an "ls" command, I get: Couldn't get handle: Permission deniedand when I try to get the file "junk" (listed above), I get: Couldn't stat remote file: Permission deniedAnyone know what I'm doing wrong?
I am trying to put a file from one linux machine to my other linux machine. There is absolutely no problem in downloading the file i.e. performing the "get" operation but when I try to upload or "put file" from my host1 to host2 it throws error "Error 0 Permission denied". I am able to put files from host2 to host1 without any problem but not from host1 to host. Infact if I try to tftp even localhost on host2 it throws the same error. Here is my
/etc/xinetd.d/tftp file for host2 service tftp { socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -c -s /tftpboot #disable = yes disable = no per_source = 11 cps = 100 2 flags = IPv4 } And permissions on /tftpboot are 777 [root@LinuxServer /]# ls -ld /tftpboot/ drwxrwxrwx 2 root root 4096 Jan 6 05:21 /tftpboot/ [root@LinuxServer /]# ls -l /tftpboot/ total 16 -rwxrwxrwx 1 root root 11 Jan 6 06:16 new_test -rwxrwxrwx 1 root root 12 Jan 5 06:02 test2
And the command which I am using is : [root@LinuxServer /]# tftp localhost -c put new_test Error code 0: Permission denied And ya here is /etc/sysconfig/selinux file is as under : # This file controls the state of SELinux on the system. # SELINUX= can take one of these three values: # enforcing - SELinux security policy is enforced. # permissive - SELinux prints warnings instead of enforcing. # disabled - SELinux is fully disabled. SELINUX=permissive # SELINUXTYPE= type of policy in use. Possible values are: # targeted - Only targeted network daemons are protected. # strict - Full SELinux protection. SELINUXTYPE=targeted
I have a user (let's call him John) who is not able to list contents of several 777 directories even though it appears he has permission to.
Case in point, as root:
Code:
Code:
If I use ls -a or strictly ls as john, I can list the contents of the nss directory:
Code:
That says to me that I have an issue listing permissions. Fine, I don't really need john to be able to list permissions. I want him to have rwx access to /media/nss/ENG which as you can see from my listing as root shouldn't be a problem since the perms on that dir are 777.
I am able to CD into the ENG directory or any other directory or subdirectory in /media/nss that has equivalent 777 perms, but once in the directories I can't list the contents:
Code:
I can get anywhere and do anything I want under the media/nss folder as john, except listing files. I even tried using an ACL i.e.
I am trying to give an SSH user on my server permission to compile C exploit with gcc, and I have had no luck. Every time i try to run gcc i get: "sh: /usr/bin/gcc: Permission denied. Has anyone else had this problem with this ?
Im trying to move some files from my desktop to /usr/share/ProjectM Project M is a visualization program, and Im trying to move some presets I downloaded there. The error I get is
Code:
There was an error moving the file into /usr/share/projectM/presets. Error moving file: Permission denied
I am logged in as administrator, why can't I move these files?
I tried to run this: ls * -lag > test1.txt And it gives me a 'Permission denied' for text1.txt (a new file to be created.)
Now I have admin privileges (in fact I'm the only one set up on it) and I can't figure out why I'm getting this 'Permission denied'. Do I have to create the file first and chmod so I can read/write/delete the file?
I am attempting to make a backup copy of a file, but every time I try to copy the file, I get a "permission denied error -- even when running as root. The file is on a volume mounted as /media/Data . No problems reading/writing other files on the volume.
Here is the info on the file: -rw-------. 1 root MailServer.img
I've tried chown but get the permission denied as well. This is a virtual machine image that runs fine, but even with the VM completely shut down, I get the same error.
If I try the sudo mv command on the file listed below I get the error listed. I am confused. It is my file & I have permissions. Somehow a slew of files on my system are now showing this way. This seems to correspond when I ran rsync from my netbook to sync it up with my desktop where I am having a problem.
I've just recently started learning shell scripting and I've been working on a basic csh script, but I've been having a few problems. Here's the script
Code: #!/bin/csh echo Enter a file name $< = FILE ##Name of file echo enter a size (in kilobytes) to monitor SIZETOMON = $< ##Size value that's input by user du -k $FILE = $SIZE ##Size of the file that the user wishes to monitor while (1) if $SIZE > $SIZETOMON then echo ALERT: File size is greater than $SIZETOMON end
And here's the output Code: /home/lucer/foo.txt: Permission denied. Badly placed ()'s.
I'm not really sure what the issue is with the "badly placed ()'s" or why it won't let me access files that I can access with the same shell when it's not in a script.
I am getting permission denied after su - <username>. I have checked the permission and did not get any error.
[root@NF-Provider-SOC /]# su - nfadmin -bash-3.00$ cat /var/log/messages cat: /var/log/messages: Permission denied -bash-3.00$ pwd /home/nfadmin -bash-3.00$ which bash /bin/bash -bash-3.00$ crontab -l cron/nfadmin: Permission denied -bash-3.00$ id uid=501(nfadmin) gid=503(nfadmin) groups=502(dba),503(nfadmin) -bash-3.00$ tailf /var/log/messages Cannot open "/var/log/messages" for read Permission denied and permission in home dir is 755.
I installed proftpd on a new CentOS 5 server, yet when FTPing in (I can log in fine), the files and directories do not list and I get a "550 filename: Permission denied" error each time I try to "put" or "get" a file (I can tell that the file is there, though, because if I try to access a non-existent file, I get a "No such file or directory error" instead of the permission denied error).
I made a new channels.conf file, but when I try to move it to /usr/local/etc it says permission denied, I need the config to watch digi-tv on ubuntu movie player.
I am attempting to setup an Ubuntu server as a secondary DNS server. It seems whenever it tries to dump the master file the system log shows Permission denied.let me know if more information is needed.NOTE: where it says example.com I have simply removed my actual Domain name.
Mar 21 21:49:24 ulinux named[14418]: zone example.com/IN: Transfer started. Mar 21 21:49:24 ulinux named[14418]: transfer of 'example.com/IN' from 192.168.0.15#53: connecte$
Trying to use tcpdump -r TEST, and get permission denied, even though I am logged in as root or super user. Tried using the "chmod a+rw TEST" (any other file for that matters, yes it came from another source) and get permission denied.
fresh install of ubuntu karmic server. fresh, vanilla install of openssh-server attempt to connect either via standard ssh, linux client or puTTY win32 client system (both on local LAN)
First connect is great. connection established.
Second connection (via multiple clients) screams that: "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!" and since I have strict checking, won't let me continue.
So, i do a little
Code:
To flush it out (i have backups,).
Then i try again:
I get the typical "Are you sure you want to continue connecting (yes/no)?" and i say yes. at which point, i offer the password for the username in question and it flat out refuses: "Permission denied, please try again."
Ok, so i have even gone as far as do a complete rip and replace of the ssh server and it's config files, however this continues to loop and repeat.
So, question one: Why does my key change?
Question two: Why am i getting "permission denied" errors on subsequent connect.