Server :: Config - Try To Ssh From Desktop PC Terminal - Error "Permission Denied"
Jan 13, 2011
I am trying to ssh into my server that I do have ssh installed on and have followed instructions carefully on ssh_config. My problem is that when I try to ssh from my desktop PC terminal into the server with ssh shack1@192.168.1.80, I get in return, shack1@192.168.1.80's password: I type in the password and I then get, Permission denied, please try again. I am putting in the correct password and am stumped......Please excuse my ignorance in this I have been using Ubuntu Desktop for 2-3 years and have been doing decent and am trying to venture out a bit.
View 10 Replies
ADVERTISEMENT
Nov 26, 2010
I have a ubuntu server 10.04 with LAMP installed. I also have ubuntu 10.10 on a laptop and can copy files to the server fine. To keep my website uptodate, I usually use Filezilla without any problems. I have just installed Fedora 14 on an old desktop and set up "my stall" ok. The problem is that I cannot copy any files from Ferdoa to the server due to:-
Response: 550 Permission denied.
Error: Critical file transfer error
I have tried to change the directory on the server "/var/www" using chmod -R 775* and chmod -R 777*, but it makes no difference, the file transfer still fails.
View 5 Replies
View Related
Nov 23, 2010
When trying to mount samba share off of domain member server sysimage in Windows receive error "There are currently no logon servers available to service this logon request". When trying to mount.cifs from PDC to samba share on sysimage receive error "mount error(13): Permission denied".
PDC is ClearOS 5.2 named "dc0"
Samba file server is CentOS 5.5 x86_64 named "sysimage"
dc0 Samba version is samba - 3.5.5-1.1.v5.i386
sysimage Samba version is samba-3.0.33-3.29.el5_5.1.x86_64
dc0 is configured correctly to my knowledge, windows machines can join domain, domain users can log into windows machines, user directories are mapped properly, logon scripts run properly. sysimage ldap authentication is set up as shown in "Procedure 7.1.
[code]....
View 1 Replies
View Related
May 19, 2011
i can upload and download things from/to my ftp server but when i want to Overwrite a file it shows me that:
PHP Code:
error 550 server.cfg: Overwrite permission denied
What can i do i gave premmision to download and upload so whats the problem
View 1 Replies
View Related
Dec 22, 2010
I recently switched from Ubuntu Maverick 32-bit to 64-bit so I could compile Android's latest revision, Gingerbread.
Everything went pretty smoothly and I managed to fix most issues that was caused due to the switch.
But each time I open terminal, the following error shows up:
Code:
mkdir: cannot create directory `/mnt/cgroups/cpu': Permission denied
bash: /mnt/cgroups/cpu/19088/notify_on_release: No such file or directory
bash: /mnt/cgroups/cpu/19088/tasks: No such file or directory
I've tried manually creating that directory as root but the error remains.
View 2 Replies
View Related
Aug 6, 2009
I'm using crontab for user ABC in a month and have no problem.. But today i want to add new schedule user ABC with crontab.. i found this error
/tmp/crontab.XXXXDYxb6a: Permission denied
so i check with crontab -l command, it can show my schedule.. If I use root, crontab -e and crontab -l work properly..
Note: ls -al /tmp
drwxr-xrwx 8 root root 4096 Aug 6 09:30 .
drwxr-xr-x 24 root root 4096 Jul 19 17:10 ..
drwxrwxrwt 2 root root 4096 Jul 19 17:20 .font-unix
View 1 Replies
View Related
Jan 7, 2010
I have proftpd @ Ubuntu 9.04 server. It authenticates users via Auth file, e.g. those are "FTP only" users, not real linux users. Each of them has assigned home dir in the same auth file. They also get Chrooted into it, e.g. default dir is ~ in proftpd.conf They can connect and download files successfully, however, they cannot upload anything or create directory: 550 permission denied error.
When I login via ssh and change user to proftpd user, I can create directories in that particular place, so I guess it's not Linux permissions problem? Or is it? /var/log/daemon.log is the place where proftpd stores its logs, but I cannot find anything relevant there
View 5 Replies
View Related
Feb 19, 2010
I made a new channels.conf file, but when I try to move it to /usr/local/etc it says permission denied, I need the config to watch digi-tv on ubuntu movie player.
View 3 Replies
View Related
Mar 31, 2011
Why when I want to install some thing on my ubuntu 10.10 from terminal or user any other commands I have this output:
Permission denied
This one I want to install make-3.82. I extract files and open install file (a text guide file)
in this guide I see this
HTML Code:
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
I do this I open my terminal cd to that location and type ./configure
And output is this:
bash: ./configure: Permission denied
When I want to make any softwares I have the same problem? I have to give terminal any permission or something? I want to do any action to don't see this .... message again.
View 6 Replies
View Related
Jun 16, 2011
I have Ubuntu10.10 in my HP-laptop. I am trying to install ANSYS. There is an install file in setup. When I try to give install in terminal, being in the same directory it says, command not found. I tried ./INSTALL, it says "bash: ./INSTALL: Permission denied". I also tried from my home folder with full path for the install file, as the readme file says, "To install, enter the full path to the installation program on the media or to the downloaded installation files". I don't know what to do. I have these setup file in my external hard drive.
View 6 Replies
View Related
May 31, 2011
I have tried several things to attempt to fix my sudoers file however it is still coming up with errors. The error says
[code]...
the sudoers configuration file is set to the default as I have ran a dpkg on it, have also uninstalled and reinstalled it, and went over the configuration file ensuring it looked like the defaults I had seen online.
View 8 Replies
View Related
Jan 1, 2011
I'm running an NFS Server on my Fedora machine and trying to mount it on my OpenSuse netbook.Right now I'm getting a "permission denied error" when I try to mount NFS on my netbook. (Yesterday I could mount, but could only read not write... strange)
my Servers IP is 192.168.1.45
my Netbooks IP is 192.168.1.42
/etc/export on Server
Code:
/home/bob/Music 192.168.1.42(rw,no_root_squash)
/etc/hosts.allow on Server
Code:
sshd: 192.168.1.0/255.255.255.0
[Code].....
View 14 Replies
View Related
Oct 23, 2010
[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
View 3 Replies
View Related
Apr 23, 2009
hi i recently installed unbuntu 8.10 desktop version i am have permission denied on most commands and im unable to slave my 160 gig internal drive.
View 7 Replies
View Related
Oct 17, 2010
I tried removing it and installing again but I still get the same code in the terminal:
[Code]....
View 3 Replies
View Related
Dec 7, 2010
I have a shared directory on another machine but I can't get it to mount. The permission denied doesn't say where/which permission is denied. Is it on the remote on on the local machine? The remote has sharing enabled for the shareddocs directory and after I have mkdir'ed the local mount point I open it's permissions too.
The verbose response from mount.cfis looks like this:
mount.cifs kernel mount options: unc=//192.168.1.102shareddocs,domain=WORKGROUP,ver=1,rw ,username=clive,,,,,,,,,,,ip=192.168.1.102,pass=** ******
mount error(13): Permission denied
Refer to the mount.cifs( manual page (e.g. man mount.cifs) The man page does not have a list of error codes.
View 3 Replies
View Related
Jul 19, 2010
I want to install Ubuntu 4.10. But I get error permission denied face. I do not have CD-ROM. How can I do this?Is it possible to install via USB? [URL]
View 2 Replies
View Related
Feb 8, 2011
I've just set up keys using
[Code]...
View 5 Replies
View Related
Aug 2, 2011
I had Fedora 8 installed in few clients and a server (same server for NFS and NIS), and NIS and NFS configured, and was working fine. Yesterday, I upgraded few client computers to Fedora 15 (server is still same), and configured NFS and NIS client. NFS is working fine, I can see home directories.
For NIS: ypwhich, ypcat passwd gives me correct uutput, ypbind is running. The problem is, I can't login to NIS client. The error is: Permission denied, please try again. My nssswitch.conf is
[Code]...
View 2 Replies
View Related
May 11, 2010
I'm having a permissions problem with Ubuntu and apache. There are two users, I'll just call them A and B. All of the files belong to A and group root. I'm logged in as B and I have admin privileges. My website is working just fine but when I create a directory in the web root, change the owner to A on the directory and all files I still get a Permission Denied error when I try to access it from the web. I've also set permissions to rxwr-xr-x on the directory and all the files. So I don't understand what's going on. Why am I still getting a permission denied error?
View 1 Replies
View Related
Aug 10, 2010
I want to use SSH to connect to my desktop. I have used Ubuntu 10.10's encryption to encrypt my home folder (thus encrypting my .ssh folder). This means that the OpenSSH doesn't have access to my .ssh folder. When I try to log into SSH before logging in on the local machine I get the following error:
Code:
jason@ONONWARA:~$ ssh jason@192.168.1.152
Ubuntu 10.04.1 LTS
NIHATI
Permission denied (publickey).
If I log onto the machine, then use SSH it works fine. I want to use key based login, One way to get around this error would be use a different authorized_keys file, but I don't know of a way to do this. This is the contents of my sshd_config file:
Code:
# Package generated configuration file
# See the sshd_config(5) manpage for details
# What ports, IPs and protocols we listen for
[code]....
View 2 Replies
View Related
Aug 28, 2010
I am using Ubuntu server edition 10.04.1 running in Vmware server 2.02.I am connect via Putty so I can use copy and paste.My first goal is configuring a ftp server using PureFtpd using this guide.In section 10 I need to write this command
cat /dev/null > /etc/pure-ftpd/db/mysql.conf
I am getting this error
almog@Testing:~$ sudo cat /dev/null > /etc/pure-ftpd/db/mysql.conf
-bash: /etc/pure-ftpd/db/mysql.conf: Permission denied
I tried with and without "sudo" and I am getting the same error.
View 3 Replies
View Related
Dec 4, 2010
Im trying to move some files from my desktop to /usr/share/ProjectM Project M is a visualization program, and Im trying to move some presets I downloaded there. The error I get is
Code:
There was an error moving the file into /usr/share/projectM/presets.
Error moving file: Permission denied
I am logged in as administrator, why can't I move these files?
View 7 Replies
View Related
Jan 11, 2011
I'm trying to create a folder using the archive manager to install Resin (web server) in the usr/local folder but I get the error message 'error creating directory: Permission denied.' Is this the easiest way to install an app--by using the Archive Manager--and if so how do I establish the correct permissions.
View 1 Replies
View Related
May 2, 2011
I'm breaking my head on this.I want to create a development environment. This means that I want to be able to create/change files myself, but php should be able to do the same. I installed a lamp-stack using tasksel. Afterwards I installed phpmyadmin. So far so good. Going to http://localhost shows "it works".
Then I created a folder /home/hwc/www and created a new apache site called hwc, disabled default and enabled hwc that points to /home/hwc/www and has the directive AllowOveride All set. But when I go to http://localhost know I get a 403 Permission denied error. I've tried several trings like changing ownership of /home/hwc/www to www-data:www-data, to hwc:www-data, to hwc:hwc, but all to no avail. Even adding www-data to group hwc and hwc to group ww-data did not help. According to other posts at least on of these solutions should have worked, but it did not. I could probably fix it by letting apache run as hwc, but that doesn't seem right.
View 3 Replies
View Related
Jul 9, 2009
Is it possible to change the general permission denied error. I have some rather young users on this system that think they can "hack the gibson" and I would love to change the general error message to something a little more rude/funnyex:# cd restricted area
-sh: cd: restricted area: Permission deniedI am curious if its possible to change the error message in general?ex:# cd restricted area-sh: cd: restricted area: (funny/rude message goes here)Quick info:This is a Gentoo 2008.0 system, I would also love to do this on my slacware and OpenBSD boxes as well just for kicks.
View 2 Replies
View Related
Mar 24, 2010
I have trouble with rsa authentication:
I did create an rsa certificate with ssh-keygen using my root account on a client: ssh-keygen -t rsa -b 2048 no passphrase I did copy the rsa pub_key from my client to the server scp id_rsa sampleuser@sampleserver:/home/sampleuser/.ssh/authorized_keys
I did change the ownership to the "sampleuser" of the pub key file on the server: I trayd to connect:
ssh sampleuser@sapleserver
I get that: permission denied (public key)... I know I do smth wrong but I don't know what.
View 2 Replies
View Related
Mar 18, 2009
I have a written a java code to ftp a file from the windows box to unix box. It keeps giving me the following error : "java.io.FileNotFoundException: PORT 204,63,56,5,16,78: 550 Permission denied." I am able to ftp manually from windows to unix.
View 5 Replies
View Related
Aug 7, 2010
I installed wvdial on my Satellite Toshiba laptop. All works well but I have to use the <wvdial> command as root. If I try to use it as a user i get an error message Cannot open /dev/ttyACM0: Permission denied So Im just wondering; is it ok to use wvdial as root?
View 2 Replies
View Related
Mar 1, 2011
I have a user (let's call him John) who is not able to list contents of several 777 directories even though it appears he has permission to.
Case in point, as root:
Code:
Code:
If I use ls -a or strictly ls as john, I can list the contents of the nss directory:
Code:
That says to me that I have an issue listing permissions. Fine, I don't really need john to be able to list permissions. I want him to have rwx access to /media/nss/ENG which as you can see from my listing as root shouldn't be a problem since the perms on that dir are 777.
I am able to CD into the ENG directory or any other directory or subdirectory in /media/nss that has equivalent 777 perms, but once in the directories I can't list the contents:
Code:
I can get anywhere and do anything I want under the media/nss folder as john, except listing files. I even tried using an ACL i.e.
Code:
Why this isn't working?
View 8 Replies
View Related
