Server :: Ssh - Permission Denied - Publickey

Nov 25, 2010

If I try to connect to 192.168.1.100 server, I get:

Code:

Unfortunately, I don't manage this 192.168.1.100 server. Am I correct, that sshd on 192.168.1.100 supports only publickey authentication because:

Code:

I have .ssh/id_rsa present. Any ideas, what might cause this "Permission denied (publickey)" issue?

View 2 Replies


ADVERTISEMENT

Debian :: SVN Checkout - Permission Denied (publickey)

Feb 12, 2016

I try to do SVN checkout,looks like I'm facing this issue.I can ssh using putty to this server(banana).But from machine to machine it show same error.

SVN checkout
zr@banana [104]$ svn co $SVNROOT/deployment/new_debian_install
Permission denied (publickey).
svn: To better debug SSH connection problems, remove the -q option from 'ssh' in the [tunnels] section of your Subversion configuration file.
svn: Network connection closed unexpectedly
================================
ssh machine to machine:
zr@banana [105]$ ssh apricot
Permission denied (publickey)

View 1 Replies View Related

Ubuntu Servers :: SSH Error: Permission Denied (publickey)

Aug 10, 2010

I want to use SSH to connect to my desktop. I have used Ubuntu 10.10's encryption to encrypt my home folder (thus encrypting my .ssh folder). This means that the OpenSSH doesn't have access to my .ssh folder. When I try to log into SSH before logging in on the local machine I get the following error:

Code:

jason@ONONWARA:~$ ssh jason@192.168.1.152
Ubuntu 10.04.1 LTS
NIHATI
Permission denied (publickey).

If I log onto the machine, then use SSH it works fine. I want to use key based login, One way to get around this error would be use a different authorized_keys file, but I don't know of a way to do this. This is the contents of my sshd_config file:

Code:

# Package generated configuration file
# See the sshd_config(5) manpage for details
# What ports, IPs and protocols we listen for

[code]....

View 2 Replies View Related

General :: SSH - Permission Denied (publickey,keyboard-interactive)?

May 11, 2010

I have OpenSSH_5.5p1 on my Fedora 10.I generated a key pairs using ssh-keygen and added the pub key to the remote machine that I wanted to connect. When I try to sshing, I am getting : Permission denied (publickey,keyboard-interactive).When I try to connect to the machine itself also getting the same error.

sshd_conf :
Protocol 2
HostKey /etc/ssh/ssh_host_dsa_key

[code]....

View 3 Replies View Related

Ubuntu Networking :: X11vnc - Permission Denied (publickey - Password)

Sep 22, 2010

I want to access my desktop from my laptop over the internet, after a while I found this [URL] so I followed the instructions "Access your PC over the internet" and "Logging in from another Ubuntu PC". Everything goes well until I try to run the shell script and get this: laptopuser@123.456.7.890's password:

I tried my luck with the passphrase associated with the rsa key, with the password of the laptopuser@laptop and with the password of the desktopuser@desktop but I keep getting Permission Denied (publickey, password).

View 5 Replies View Related

Ubuntu :: SSH From OSX Using RSA Authentication Error Permission Denied (publickey,password)

Feb 20, 2011

I am trying to set up remote login via SSH from my Mac to an Ubuntu desktop. Here is the error i am getting:

Code: Permission denied (publickey,password). I'll give background:

- Both computers are on the same network
- I'm not using the default port 22
- I have successfully logged in using password authentication, so it isn't a firewall/iptables issue i don't think. I've already worked through those issues!
- I haven't set up any tcp wrappers on the server yet, so nothing is being denied
- I believe the server sshd_config file is setup correctly. I can post it if needed.

Here's debugging info:
bash-3.2$ ssh localuser@xxx.xxx.x.x -v
OpenSSH_5.2p1, OpenSSL 0.9.7l 28 Sep 2006
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to xxx.xxx.x.x [xxx.xxx.x.x] port xx.
debug1: fd 3 clearing O_NONBLOCK
debug1: Connection established.
debug1: identity file /Users/localuser/.ssh/id_rsa type 1
[Code]....

View 8 Replies View Related

Ubuntu :: Ssh Permission Denied (publickey) Bind To Port 22 On 0.0.0.0 Failed: Address Already?

Jul 19, 2011

I'm trying to add a key public key for my dev box which is a vm running ubuntu natty, and I am unable to connect via ssh. I've tried rsa and dsa, as well as these commands:

exec ssh-agent bash
ssh-add ~/.ssh/id_rsa
ssh-add ~/.ssh/id_dsa

[Code]...

I think I've found the error by running sudo /usr/sbin/sshd -Dd, but I'm not sure how to fix it:

ebug1: sshd version OpenSSH_5.8p1 Debian-1ubuntu3
debug1: read PEM private key done: type RSA
debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048

[Code]...

View 3 Replies View Related

General :: Scp Gives "Permission Denied (publickey,gssapi-with-mic,password)"?

Feb 4, 2011

I'm having a remote server running SSH, I use the scp from my local computer like this:scp filename.txt username@IP:Port:home/usernameit asks for the password, I supply it, he doesn't accept it for 3 times and then I get "Permission denied (publickey,gssapi-with-mic,password)"

View 1 Replies View Related

Debian :: SSH "permission Denied" Publickey Password

Sep 22, 2010

I am trying to ssh into one of my boxes and I keep getting a returned error "permission denied" (publickey, password).

I know that I am using the correct password. I have also set my router to forward the port to the correct IP. I am using the login option-l to specify the user that I want to log into the server as. On another box I removed some options from the ssh_config so that it would only use password authentication and THIS WORKED. On the new box, however, I do not see any option for removing the other authentication methods. Can I stop the ssh from the client from trying to use the other methods of authentication (I'm guessing this is what the publickey error is)?

By the way, both machines can ssh localhost.

View 3 Replies View Related

Server :: Permission Denied With Ls -l Or Ls -la But Ls Ok

Mar 1, 2011

I have a user (let's call him John) who is not able to list contents of several 777 directories even though it appears he has permission to.

Case in point, as root:

Code:

Code:

If I use ls -a or strictly ls as john, I can list the contents of the nss directory:

Code:

That says to me that I have an issue listing permissions. Fine, I don't really need john to be able to list permissions. I want him to have rwx access to /media/nss/ENG which as you can see from my listing as root shouldn't be a problem since the perms on that dir are 777.

I am able to CD into the ENG directory or any other directory or subdirectory in /media/nss that has equivalent 777 perms, but once in the directories I can't list the contents:

Code:

I can get anywhere and do anything I want under the media/nss folder as john, except listing files. I even tried using an ACL i.e.

Code:

Why this isn't working?

View 8 Replies View Related

Server :: /usr/bin/gcc: Permission Denied?

Apr 12, 2011

I am trying to give an SSH user on my server permission to compile C exploit with gcc, and I have had no luck. Every time i try to run gcc i get: "sh: /usr/bin/gcc: Permission denied. Has anyone else had this problem with this ?

View 2 Replies View Related

Networking :: NFS Server - Permission Denied ?

May 12, 2010

I have a mount problem with a NFS server on Debian Lenny. No matter what I do, I cannot mount a directory from another Debian box on the same network.

The error the client gives:

The server reports:

But there it is, in my exports:

cat /etc/exports:

Doing a:

NOTE: this default has changed since nfs-utils version 1.0.x

Comes up empty (and it should not, right?)

There is no firewall inbetween. No access restrictions via the tcpwrappers.

View 8 Replies View Related

Server :: Permission Denied After SU - Username

May 25, 2011

I am getting permission denied after su - <username>. I have checked the permission and did not get any error.

[root@NF-Provider-SOC /]# su - nfadmin
-bash-3.00$ cat /var/log/messages
cat: /var/log/messages: Permission denied
-bash-3.00$ pwd
/home/nfadmin
-bash-3.00$ which bash
/bin/bash
-bash-3.00$ crontab -l
cron/nfadmin: Permission denied
-bash-3.00$ id
uid=501(nfadmin) gid=503(nfadmin) groups=502(dba),503(nfadmin)
-bash-3.00$ tailf /var/log/messages
Cannot open "/var/log/messages" for read
Permission denied
and permission in home dir is 755.

View 1 Replies View Related

Server :: Permission Denied On New Partition?

Apr 16, 2010

I have created a new partition

/dev/cciss/c0d0p2 8489 17709 74067682+ 83 Linux
I formatted it with
mkfs.ext3 /dev/cciss/c0d0p2

[code]....

View 11 Replies View Related

Server :: Proftpd Getting 550 Permission Denied

Jun 16, 2010

I installed proftpd on a new CentOS 5 server, yet when FTPing in (I can log in fine), the files and directories do not list and I get a "550 filename: Permission denied" error each time I try to "put" or "get" a file (I can tell that the file is there, though, because if I try to access a non-existent file, I get a "No such file or directory error" instead of the permission denied error).

View 10 Replies View Related

Ubuntu Servers :: Ssh Server - Permission Denied - Please Try Again

Feb 20, 2010

fresh install of ubuntu karmic server. fresh, vanilla install of openssh-server attempt to connect either via standard ssh, linux client or puTTY win32 client system (both on local LAN)

First connect is great. connection established.

Second connection (via multiple clients) screams that: "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!" and since I have strict checking, won't let me continue.

So, i do a little

Code:

To flush it out (i have backups,).

Then i try again:

I get the typical "Are you sure you want to continue connecting (yes/no)?" and i say yes. at which point, i offer the password for the username in question and it flat out refuses: "Permission denied, please try again."

Ok, so i have even gone as far as do a complete rip and replace of the ssh server and it's config files, however this continues to loop and repeat.

So, question one: Why does my key change?

Question two: Why am i getting "permission denied" errors on subsequent connect.

View 9 Replies View Related

Hardware :: 223.7Gi Block On Server HD - Permission Denied ?

Nov 5, 2010

Short version:I began getting "out of space" errors on my soho server this week. I know I only had about 300Gi of data on the 640Gi drive. I can't find what's using the extra space. As the attached screenshots show, "sudo xdiskusage" finds a block of 223.7Gi with "permission denied" but sudo Disk Usage Analyzer doesn't see it. What is using the space, and how do I reclaim it?

Long Version:I first tried to figure something out using SSH and the df and du commands, but my command line knowledge is weak. I tried to log onto Gnome to use its console but kept getting booted back to the GUI login. After deleting some old files using Webmin, I finally was able to log into Gnome and use some GUI utilities. As you can see from the screenshots, "sudo xdiskusage" finds a block of 223.7Gi with "permission denied" but sudo Disk Usage Analyzer doesn't see it. The system behaves as if that block is real denying me use of that space.

I suspected the manner in which I've mounted the second HD for use as backup storage only might be the problem, but really have no clue how to confirm that. The system returns the same numbers regardless of whether the second drive is mounted or not.

I've attached the dmesg results in a text file

Computer Details
Ubuntu 10.10
4Gi RAM
1 640Gi HD mounted as /
1 640Gi HD mounted as /backup (used only by Simple Backup)
Running Server Apps: Samba, Apache, SSH, mySQL, webmin

View 2 Replies View Related

Networking :: NFS Server Mount - Permission Denied

May 2, 2010

I just set up a storage server with NFS sharing. Everything work fine but, when trying to mount the remote partition on my ws, this is the issue:
/usr/sbin/start-statd: line 8: /sbin/rpc.statd: Permission denied
/usr/sbin/start-statd: line 8: /sbin/rpc.statd: Success
mount.nfs: rpc.statd is not running but is required for remote locking.
mount.nfs: Either use '-o nolock' to keep locks local, or start statd.

I tried so to mount it locally :
mount.nfs: access denied by server while mounting localhost:/var/ftp/pub /mnt
I don't think it depends because of the permiss of the directory, and anyway it's 1777.

View 4 Replies View Related

Server :: Mount Error(13): Permission Denied

Nov 23, 2010

When trying to mount samba share off of domain member server sysimage in Windows receive error "There are currently no logon servers available to service this logon request". When trying to mount.cifs from PDC to samba share on sysimage receive error "mount error(13): Permission denied".

PDC is ClearOS 5.2 named "dc0"
Samba file server is CentOS 5.5 x86_64 named "sysimage"
dc0 Samba version is samba - 3.5.5-1.1.v5.i386
sysimage Samba version is samba-3.0.33-3.29.el5_5.1.x86_64

dc0 is configured correctly to my knowledge, windows machines can join domain, domain users can log into windows machines, user directories are mapped properly, logon scripts run properly. sysimage ldap authentication is set up as shown in "Procedure 7.1.

[code]....

View 1 Replies View Related

Server :: Vsftpd - 550 Permission Denied For Upload

Feb 1, 2010

I've got that vsftpd running on a ubuntu 9.10 machine. Although I cannot upload any file, I always get a "550: Permission denied"-error.

Code:
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#

[Code].....

View 8 Replies View Related

CentOS 5 Server :: Tftp Permission Denied?

Feb 3, 2010

I'm trying to setup a network boot server and I'm having an issue with tftp. In the /etc/xinetd.d/tftp file, I added the "-v" (verbose) option to the server arg line so that i could figure out what was happening. When i looked at the /var/log/messages log file, it let me know that permission was denied to /tftpboot/nbi_img.

So, in short, my problem is that tftp isn't working because it doesn't have permission to /tftpboot/nbi_img. I can't figure out why. I stumbled upon a site where the user figured out a temporary fix to this issue and what he did was disabled the xinetd service and typed the following command:/usr/sbin/in.tftpd -l -v -v -s /tftpboot/nbi_imgWhen I do this as well, it works! but only until I restart and then I have to do that again. Is there a way to be able to fix that for good?

View 3 Replies View Related

General :: Cannot Login To Server - Permission Denied (Public Key)

May 1, 2011

I am working currently on my server on an issue, I configured the SSH Deamon that only people who have a valid ssh-key can login on to the server, and kicked the password option. Now I've added a user account git. I navigate to his home folder created the folder ".ssh" and created in that folder the file "authorized_keys" I copied my public key in there. Now on my local machine I added that identity (via ssh-add) and I wanted to connect to my server. but when I'm trying to login myself I can't the only message I get is "Permission denied (publickey)."

View 1 Replies View Related

Ubuntu :: Connecting To Home Server Via SSH - Permission Denied

Sep 22, 2010

Is it possible to SSH to a remote computer from within an SSH session? I'm connecting to my home server via SSH, and trying to connect out to my VPS. I know the key.ppk file works, as I can use it to connect directly from my PC. The output I'm getting is shown below:

Code:
# ssh -i key.ppk -v -l myuser myuser@domain.co.uk
(tried various ways of doing this)

Code:
OpenSSH_4.6p1 Debian-5ubuntu0.1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to mydomain.co.uk [123.456.789.012] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0 .....
debug1: PEM_read_PrivateKey failed
debug1: read PEM private key done: type <unknown>
debug1: No more authentication methods to try.
Permission denied (publickey).
There's nothing I can see in the auth.log file on the VPS.

View 2 Replies View Related

Ubuntu Servers :: Password To Log Into SSH Server - Permission Denied

Jan 23, 2011

I have created a basic ssh server and i haven't done any configuring to it other than to port forward port 22. i am trying to connect to it from a client computer (they are on the same router). i enter the command "SSH <IP of the server>", and it asks me for the password. i have tried "SSH <my user name>@<IP of client>", but it says permission denied.

View 8 Replies View Related

Ubuntu :: Error 550 Server.cfg: Overwrite Permission Denied

May 19, 2011

i can upload and download things from/to my ftp server but when i want to Overwrite a file it shows me that:

PHP Code:
error 550 server.cfg: Overwrite permission denied

What can i do i gave premmision to download and upload so whats the problem

View 1 Replies View Related

General :: Permission Denied To A Samba Server User

Jan 9, 2010

I have configured samba server.My requirement was that the path which i have to share was /srv/www/htdocs.With this the shared path for developer user was /srv/www/htdocs/projects.

So in the smb.conf file i made the entries as following:

After that root user was able login to both /srv/www/htdocs and also project folder and developer was only able to login to projects folder.That was according to my requirement but now the problem is that when developer is trying to edit any file in projects folder he is getting error that you dont have permissions to change this file.But developer should be able to edit any files. What changes i need to do now.

View 3 Replies View Related

Server :: Dovecot-lda/postfix - Failed: Permission Denied

Apr 27, 2011

I'm sooo exausted after two days of fooling with this. The problem: Apr 27 17:29:21 mxkasib dovecot: lda: Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Permission denied (euid=8(mail) egid=12(mail) missing +w perm: /var/run/dovecot/auth-userdb, euid is not dir owner)

Obviously, dovecot-lda, instanced by postfix, couldn't access the auth-userdb file because of permission. There are plenty of topics over the internet, the problem is really simple. Except for I've got all the permissions needed, or it seems to me so and I'm missing something. Here is some additional information:

[Code]...

I've given all the permissions I could imagine. It's even devil 666, and it still complains.

View 2 Replies View Related

CentOS 5 Server :: Vsftpd - Permission Denied On Login

Jun 2, 2009

I followed instructions from here: [url]

Everything seems to be ok but if I try to login it says following:

I have tried with numerous clients and accounts but still nothing, I cant get past the login. What may be wrong?

Here is the log from account creation, could the last line be causing the problems?

I had some hassle with the last two iptables lines but once I took away RH-Firewall-1 from those lines iptables gave no error anymore.

I changed this: -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT

To this: -A INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT

View 4 Replies View Related

Ubuntu Servers :: Proftpd Permission Denied After Upgrade From Server 8.1 To 9.1

May 24, 2010

After upgrading ubuntu server to the latest version (according to apt-get) proftpd stopped working. When I try to execute proftpd I get the following message (when logged in as root or user with root privileges) :

Code:

Line 18 in modules.conf looks like this:

Code:

I've tried removing and re-installing proftpd, but this doesn't help

If I comment line 18 in modules.conf, I just get permission denied on the next LoadModule command...

Can I remove all modules? or is there a way of fixing the permission denied issue?

View 2 Replies View Related

Server :: Can't Create Mailbox In Cyrus-imap - Permission Denied

Jan 4, 2010

i can't get cyrus mailbox created. what i get is only error:

cm user.test.test
createmailbox: Permission denied

if i try user without "lastname":

cm user.test
createmailbox: System I/O error

here's maillog message:

Jan 4 13:08:09 pigeon imap[21695]: login: host.domain.com [127.0.0.1] cyrus plaintext User logged in
Jan 4 13:09:12 pigeon imap[21695]: IOERROR: creating directory /mail/imap: Permission denied

[code].....

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved