hi i recently installed unbuntu 8.10 desktop version i am have permission denied on most commands and im unable to slave my 160 gig internal drive.
View 7 Repliesi've query regarding, user creation in Linux( RHEL 5), i.e, i've created a user ([root@localhost ~]#useradd slash ) and switched into that user, but am not able to run commands in it......It's displaying a message saying, PERMISSION DENIED. Do we need to provide any permissions while creating a user
View 7 Replies View RelatedI am trying to run matlab 7.7 (R2008b) on my ubuntu 9.10 distribution..the thing is that I am totally new with both matlab and linux and I get the following error message from matlab when I try to run an example mex-function:
>> mex yprime.c
/home/margareta/Desktop/matlab/bin/mex: 1572: gcc: Permission denied
Warning: You are using gcc version "". The earliest gcc version supported with mex is "4.0.0". The latest version tested for use with mex is "4.2.0". To download a different version of gcc, visit [URL] eval: 1: gcc: Permission denied mex: compile of ' "yprime.c"' failed. Error using ==> mex at 213 Unable to complete successfully.
I had gcc-4.4 as default on my pc, so after this error I downloaded an older version (gcc-4.1) and removed with rm the symbolic link in /usr/bin pointing to gcc-4.4 and created a new one pointing to gcc-4.1. Now when I type gcc -v in the terminal it says that gcc is in the packages gcc and pentium-builder, to do an apt-get install. I tried that but than it says that gcc-4.1 is already the newest version. It seems that I have multiple versions of gcc installed but neither the terminal nor matlab can find them.
I have a ubuntu server 10.04 with LAMP installed. I also have ubuntu 10.10 on a laptop and can copy files to the server fine. To keep my website uptodate, I usually use Filezilla without any problems. I have just installed Fedora 14 on an old desktop and set up "my stall" ok. The problem is that I cannot copy any files from Ferdoa to the server due to:-
Response: 550 Permission denied.
Error: Critical file transfer error
I have tried to change the directory on the server "/var/www" using chmod -R 775* and chmod -R 777*, but it makes no difference, the file transfer still fails.
I have a problem when i installed ubuntu via usb drive and cd.. and i try it in windows xp and windows 7. it's a same problem .. but this is the error message " permission denied "
The log:
Also i try this v Ubuntu 11.04 Ubuntu 10.10
I am trying to ssh into my server that I do have ssh installed on and have followed instructions carefully on ssh_config. My problem is that when I try to ssh from my desktop PC terminal into the server with ssh shack1@192.168.1.80, I get in return, shack1@192.168.1.80's password: I type in the password and I then get, Permission denied, please try again. I am putting in the correct password and am stumped......Please excuse my ignorance in this I have been using Ubuntu Desktop for 2-3 years and have been doing decent and am trying to venture out a bit.
View 10 Replies View RelatedI'm new to Linux, so I decided to try using Wubi to get started. THe problem is, when it finished installing 10.04, I got this message: OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-10.04-desktop-amd64.iso' Is there any way around this? It might just be that overly restrictive thing called Vista (which I have the bad luck to be using). I was considering getting a USB drive for Ubuntu anyway..
View 1 Replies View RelatedOk so i have a IOn based PC that i use for only xbmc. I previously had a full ubuntu 9.11 install.
I had to reformat the drive but i could not get audio working. I gave the ION Optimized live CD a go and it worked with HDMI audio running perfectly. The thing is when i close xbmc i don't have a desktop, it just goes to command line.
I need to install lirc, copy some keymap files into my xbmc folder and then setup wireless. What would be the best way? Can it all be done through command line? Can i install a desktop environment?
How can I check the version of Ubuntu 11.04 installed in my desktop: 32 or 64 bit ?
View 6 Replies View RelatedAs i came across with booting error called acer-wmi while booting into my desktop machine,insatlled with ubuntu 9.10 version.
View 2 Replies View RelatedI have just installed 9.10 netbook remix onto my Eeepc 901. I was previously using 9.4 Rather than clicking on shutdown icons, or going through shutdown menus, I added a keyboard shortcut to run a shell script containing the following code:
Code:
#!/bin/bash
init 0
because init needs to be run as root to have the correct permissions, I set the owner and group to be root , ran chmod 711, then chmod u+s to prevent anyone altering the script, and to allow anyone to execute it with root privelidges Since updateing to 9.10 netbook remix, I have been unable to get this to work. have applied the above changes but get a "/bin/bash: /usr/bin/shutdownscript: permission denied" error when I try to run my shutdown script from the terminal (nothing happens when I press the key combination asigned to the keyboard shortcut). If I run the shutdown script with sudo then it neatly shuts down. ls reveals the following permissions:-rws--s--x 1 root root
So it appears as if SUID and SGID are both set, and the owner/group are correct, and the script works, and yet it doesn't have the permissions to work. I installed 9.4 long ago enough that I can't remember if I had to do anything else to get it working, or has something changed between 9.4 and 9.10?
I tried to execute the following command: $ ./eval_online_wiki.ml -db_user aa -db_pass bb -db_name cc It returned as follows: bash: ./eval_online_wiki.ml: Permission denied What does this mean? How to solve the problem? Actually, I was following a README, and it says "$ ./eval_online_wiki -db_user <username> -db_pass <pwd> -db_name <db_name>"
View 2 Replies View RelatedForum.Ref:Ubuntu 10.4 Lucid LynxFluxboxOpera 10.61Has anyone a clue how I can solve following (minor but annoying) problem?It takes a relative long time (a few seconds) as normal user before Opera starts in my fluxbox environment. I expected a quicker startup time.Also because when I start opera as root the startup time is shorter.I started opera in a terminal. No messages when started as root with gksudoBut 5 lines of:open: Permission deniedwhen started as normal user. Startup succeeds after these messages.So I figured out that there is some kind of authorisation problem but have no clue how to find out which files opera tries to open and fails and what to do at this point.I searched for similar problems on this forum and also via google but could not find any real answers.
View 4 Replies View RelatedCurrently I am having troubles getting my ssh key to work correctly. I have had a desktop crash which has been reformatted to use ubuntu. The key residing in id_rsa.pub has been copied over to the ssh server into the authorized keys of the given user. however When we try to login we get a "permission denied (public key, keyboard-interactive)" error. below is the debug option:
jv@ops-desktop:~/.ssh$ ssh -v jv@x.x.x.x
OpenSSH_5.3p1 Debian-3ubuntu4, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[Code]....
I have a shared directory on another machine but I can't get it to mount. The permission denied doesn't say where/which permission is denied. Is it on the remote on on the local machine? The remote has sharing enabled for the shareddocs directory and after I have mkdir'ed the local mount point I open it's permissions too.
The verbose response from mount.cfis looks like this:
mount.cifs kernel mount options: unc=//192.168.1.102shareddocs,domain=WORKGROUP,ver=1,rw ,username=clive,,,,,,,,,,,ip=192.168.1.102,pass=** ******
mount error(13): Permission denied
Refer to the mount.cifs( manual page (e.g. man mount.cifs) The man page does not have a list of error codes.
Im running Ubuntu 10.10 on my hp mini 110 netbook, have been for since i upgraded from 10.04. The problem Im having all of a sudden is when I try and copy anything from internal file system, to anything external [phone, card reader, usb hardrive] I get a pop up that says Error opening file '/media/disk/<filename>': Permission denied
Should be a quick fix i would think, what you guys got ???
I've done a fresh install of Ubuntu 9.04 and tried to create a folder using the File Brower went to my user account and proceeded to create a directory. Then when trying to cp a file to this new directory I get permission denied. I checked the directory permissions and discovered that its owner was root not the user that I was signed in as.
So I had no choice but to enable the root account so I could copy the file I wanted. Why could I not have copied the file using the user that I was signed/logged int as without resorting to changing users to root. I hope that its not a bug of some kind or maybe I did something weird during the install. I would like to disable the root account again.
I'm getting this error when trying to check my software installation. On sudo make check it fails and says that:I'm logged in as root.SLASHbinSLASHbash: line 8: .SLASHtest-indexer: Permission denied
View 3 Replies View RelatedI have a user (let's call him John) who is not able to list contents of several 777 directories even though it appears he has permission to.
Case in point, as root:
Code:
Code:
If I use ls -a or strictly ls as john, I can list the contents of the nss directory:
Code:
That says to me that I have an issue listing permissions. Fine, I don't really need john to be able to list permissions. I want him to have rwx access to /media/nss/ENG which as you can see from my listing as root shouldn't be a problem since the perms on that dir are 777.
I am able to CD into the ENG directory or any other directory or subdirectory in /media/nss that has equivalent 777 perms, but once in the directories I can't list the contents:
Code:
I can get anywhere and do anything I want under the media/nss folder as john, except listing files. I even tried using an ACL i.e.
Code:
Why this isn't working?
I am trying to give an SSH user on my server permission to compile C exploit with gcc, and I have had no luck. Every time i try to run gcc i get: "sh: /usr/bin/gcc: Permission denied. Has anyone else had this problem with this ?
View 2 Replies View RelatedI compiled a hello-world code under /media/ext3-datadisk/summary/prog
where ext3-datadisk is on an external drive.
But I cannot run it.
Quote:
I am not bashing CentOS 5.2, but I don't have such problem with ubuntu 8.04.
fresh install of ubuntu karmic server. fresh, vanilla install of openssh-server attempt to connect either via standard ssh, linux client or puTTY win32 client system (both on local LAN)
First connect is great. connection established.
Second connection (via multiple clients) screams that: "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!" and since I have strict checking, won't let me continue.
So, i do a little
Code:
To flush it out (i have backups,).
Then i try again:
I get the typical "Are you sure you want to continue connecting (yes/no)?" and i say yes. at which point, i offer the password for the username in question and it flat out refuses: "Permission denied, please try again."
Ok, so i have even gone as far as do a complete rip and replace of the ssh server and it's config files, however this continues to loop and repeat.
So, question one: Why does my key change?
Question two: Why am i getting "permission denied" errors on subsequent connect.
I just installed Apache2, PHP5 and MySQL on my Ubuntu 9.10. I have about 200+ .php format files of my site (including index.php) which I need to copy to var/www.
But the permission is denied.
I want to install Ubuntu 4.10. But I get error permission denied face. I do not have CD-ROM. How can I do this?Is it possible to install via USB? [URL]
View 2 Replies View RelatedI have a Ubuntu box and just got a new hard drive. Rather than copy everything over from my old working Ubuntu install, I wanted to install Ubuntu from scratch and then rebuild the file contents.I have a large collection of music that I use on my mac (another computer) and like to keep sync'ed to the Ubuntu box. The following script used to work flawlessly:
Code:
rsync -avz --delete --exclude-from './music_exclude_list' '/Users/ryan/Music/iTunes/iTunes Music/' 'ryan@192.168.1.200:/home/share/music'
[code]....
Sudo echo fuse >> /etc/modules
Any idea why that'd yield a "bash: /etc/modules: Permission denied" error? Here's what "stat /etc/modules" says code...
I am using ubuntu 10.10. when I am using Codeblocks IDE it says that, permission :access is denied. When I try to run e .cpp code it occures. I think permission is denied on my HDD. How to make all of my HDD permitted when in Ubuntu....
View 4 Replies View RelatedWhy when I want to install some thing on my ubuntu 10.10 from terminal or user any other commands I have this output:
Permission denied
This one I want to install make-3.82. I extract files and open install file (a text guide file)
in this guide I see this
HTML Code:
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
I do this I open my terminal cd to that location and type ./configure
And output is this:
bash: ./configure: Permission denied
When I want to make any softwares I have the same problem? I have to give terminal any permission or something? I want to do any action to don't see this .... message again.
I made an my iso CD pop it into my laptop and install it Half way into the installation it goes premission denied c:/windows/users/ME/apptemp/local/temp/wubi11.04rev197 What am I doing wrong??
View 3 Replies View RelatedI'd like to view the log files, but when I try to view a log (such as daemon.log), I receive a message that says "You don't have permission to read the file." What do I need to do to have permission? (This is my computer. I've been an Ubuntu user for less than a year
View 3 Replies View Related