General :: Trying Sudo MV Command On File - Permission Denied
Jul 17, 2010
If I try the sudo mv command on the file listed below I get the error listed. I am confused. It is my file & I have permissions. Somehow a slew of files on my system are now showing this way. This seems to correspond when I ran rsync from my netbook to sync it up with my desktop where I am having a problem.
Potential Source ->
sudo rsync -av --delete --rsh=ssh joe@192.168.1.4:/media/Abyss/Memories/ /home/joe/Pictures/
Type of issue ->
mv: cannot remove `100_2259.jpg': Permission denied
joe@Tux-Box:/media/Abyss/Memories/2009/3-09$ stat 100_2259.jpg
File: `100_2259.jpg'
Size: 243012 Blocks: 480 IO Block: 4096 regular file
Device: 811h/2065dInode: 1312030 Links: 1
Access: (0777/-rwxrwxrwx) Uid: (1000/joe) Gid: (1000/joe)
Access: 2010-07-17 11:41:26.708020712 -0400
Modify: 2009-12-13 21:49:59.501938000 -0500
Change: 2009-12-24 05:54:02.854309200 -0500
View 7 Replies
ADVERTISEMENT
Aug 4, 2011
I Have been trying to change a file in filestarter using sudo /etc/rsyslog.conf. but am getting a permission denied message. How do I get into this file to change it ? Firestarter is working ok but for some reason it cannot open the system log. I Have found what amendments need to be made to get this to work but simply cannot get access to the file
View 2 Replies
View Related
Feb 28, 2011
I am installing ubuntu to amazon EC2 by following the steps at [url] The installation works fine.
Then I want to gain Remote Desktop Access to Ubuntu, so I follow [url]
However, fail at sudo /usr/lib/nx/nxsetup --install due to this file is missing.
I then use putty, navigate into /usr/lib/nx to run command below.
wget [url]
But, it always come out with permission denied issue
I also try to upload the .tar.gz file via winscp to any of the possible directories.
All fail with permission denied issue.
Permission denied.
Error code: 3
Error message from server: Permission denied
Request code: 3
View 1 Replies
View Related
Jun 10, 2011
After install TexLive, sudo stop working. If I run sudo:
Quote:
sudo: can't open /etc/sudoers: Permission denied
sudo: no valid sudoers sources found, quitting
Edit: Hal and dbus is not working either, if i startx I don't have network manager or automatic mount of pen and disks.
View 10 Replies
View Related
Mar 18, 2010
I have a CGI script that when called runs another script as a different user. Yet when the script does run I keep getting a permission denied in the logs and the script fails
In the sudoers file-
Defaults env_reset
www-data ALL=(charly) NOPASSWD=ALL
For the full question-
When looking at /etc/sudoers there is the defaults line that you can add things to. When doing a sudo -L so that I can see what I can put on that defaults line. Can an individual user have specific defaults? Ones that don't effect the rest of the people in /etc/sudoers?
View 1 Replies
View Related
Jan 6, 2011
I am trying to put a file from one linux machine to my other linux machine. There is absolutely no problem in downloading the file i.e. performing the "get" operation but when I try to upload or "put file" from my host1 to host2 it throws error "Error 0 Permission denied". I am able to put files from host2 to host1 without any problem but not from host1 to host. Infact if I try to tftp even localhost on host2 it throws the same error. Here is my
/etc/xinetd.d/tftp file for host2
service tftp {
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -c -s /tftpboot
#disable = yes
disable = no
per_source = 11
cps = 100 2
flags = IPv4
}
And permissions on /tftpboot are 777
[root@LinuxServer /]# ls -ld /tftpboot/
drwxrwxrwx 2 root root 4096 Jan 6 05:21 /tftpboot/
[root@LinuxServer /]# ls -l /tftpboot/
total 16
-rwxrwxrwx 1 root root 11 Jan 6 06:16 new_test
-rwxrwxrwx 1 root root 12 Jan 5 06:02 test2
And the command which I am using is :
[root@LinuxServer /]# tftp localhost -c put new_test
Error code 0: Permission denied
And ya here is /etc/sysconfig/selinux file is as under :
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - SELinux is fully disabled.
SELINUX=permissive
# SELINUXTYPE= type of policy in use. Possible values are:
# targeted - Only targeted network daemons are protected.
# strict - Full SELinux protection.
SELINUXTYPE=targeted
View 3 Replies
View Related
Jan 2, 2011
I am attempting to make a backup copy of a file, but every time I try to copy the file, I get a "permission denied error -- even when running as root. The file is on a volume mounted as /media/Data . No problems reading/writing other files on the volume.
Here is the info on the file:
-rw-------. 1 root MailServer.img
I've tried chown but get the permission denied as well. This is a virtual machine image that runs fine, but even with the VM completely shut down, I get the same error.
View 10 Replies
View Related
Jul 11, 2010
Code:
[serv@local subsys]$ rm -rf nagios
rm: cannot remove `nagios': Permission denied
[code]....
View 2 Replies
View Related
Apr 21, 2010
I am wondering why running this file:
Code:
-rwxrwxrwx 1 root root 1247 2010-04-21 18:25 autorun.sh
by issueing this command:
Code:
./autorun.sh
results in this message:
Code:
-bash: ./autorun.sh: Permission denied
I'm logged in as root and prior to the above I did a chown root:root on the file.
View 3 Replies
View Related
Jul 11, 2011
I am trying to create:
/etc/X11/Xsession.d/95xinput document
where
/etc/X11/Xsession.d is a folder.
So I enter the above commands:
cd /etc/X11/Xsession.d
nano 95xinput
I type my text and when I try to save it it says that permission is denied.
View 7 Replies
View Related
Oct 21, 2010
Trying to use tcpdump -r TEST, and get permission denied, even though I am logged in as root or super user. Tried using the "chmod a+rw TEST" (any other file for that matters, yes it came from another source) and get permission denied.
View 4 Replies
View Related
Jan 17, 2010
Quite a few times i have boot puppy linux live and have tried to copy file from the underlying NTFS windows HD only to get an error like permission denied when i try and copy a file to say a USB stick, i think some files copy but i seem to get permission errors with some files.
View 1 Replies
View Related
Apr 6, 2011
I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
View 1 Replies
View Related
Feb 22, 2011
I am having problems gaining access to the BackupPC admin web page. The error:
Quote:
[Tue Feb 22 16:43:59 2011] [error] [client 192.168.0.2] (13)Permission denied: Could not open password file: /etc/BackupPC/htpasswd [Tue Feb 22 16:43:59 2011] [error] [client 82.30.227.113] access to /backuppc failed, reason: verification of user id 'myhtaccessuser' not configured
Why is this occuring, is there anyway of getting around this? I just cant remember originally on my old system how I set this up.
View 3 Replies
View Related
Apr 23, 2011
I've done a fresh install of Ubuntu 9.04 and tried to create a folder using the File Brower went to my user account and proceeded to create a directory. Then when trying to cp a file to this new directory I get permission denied. I checked the directory permissions and discovered that its owner was root not the user that I was signed in as.
So I had no choice but to enable the root account so I could copy the file I wanted. Why could I not have copied the file using the user that I was signed/logged int as without resorting to changing users to root. I hope that its not a bug of some kind or maybe I did something weird during the install. I would like to disable the root account again.
View 7 Replies
View Related
Dec 13, 2009
i am getting error that Permission denied in the middle of execution of MAKE command, after i successfully ran ./configure.
View 1 Replies
View Related
May 4, 2011
nfs mounted directory which is mounted rw. I and everyone else are members of a common group. We all have write permissions in the tree: All files and directories in the tree are in the common group. All directories are set to 775 and all files are set to 664 or 775, as appropriate.If a file is owned by someone else, even though the file and the directory are group writable, I get permission denied when I try to chmod the file.
Here's the command synopsis:
997 > ls -l portparms.txt
-rwxrw-r--. 1 bdaugher fc 4091 Sep 5 2003 portparms.txt
[code]...
View 2 Replies
View Related
Sep 30, 2010
A few days ago I tried to install a driver for a Brother printer (HL-5040) in terminal mode by issuing "sudo dpkg -i --force-all hl5040lpr-1.1.2-1.i386.deb" on my Ubuntu 9.10 PC.
During the process several error messages were displayed. All of them say "permission denied" to access a directory /etc/init.d/lpd. Consequently, the installation failed and Synaptic package manager does not work any more and becomes broken.
Questions: Why did I get "permission denied" as a su? How can I get around the problem so I can re-install the driver?
View 3 Replies
View Related
Aug 28, 2010
I am using Ubuntu server edition 10.04.1 running in Vmware server 2.02.I am connect via Putty so I can use copy and paste.My first goal is configuring a ftp server using PureFtpd using this guide.In section 10 I need to write this command
cat /dev/null > /etc/pure-ftpd/db/mysql.conf
I am getting this error
almog@Testing:~$ sudo cat /dev/null > /etc/pure-ftpd/db/mysql.conf
-bash: /etc/pure-ftpd/db/mysql.conf: Permission denied
I tried with and without "sudo" and I am getting the same error.
View 3 Replies
View Related
Mar 30, 2010
I did some reading on Openvpn and am following some instructions I found @ Install & Configure OpenVPN SSL VPN in SUSE & openSUSE Linux | SUSE & openSUSE
I keep getting the same error message when I run the . ./vars command
"NOTE: If you run ./clean-all, I will be doing a rm -rf on /etc/openvpn/easy-rsa/2.0/keys"
But when I run ../vars I get
"Bash: ../vars: Permission denied"
View 1 Replies
View Related
Jan 8, 2011
i hope i'm posting in the right forum "Networking" subject related to remote onnection.. all the suggestions and solutions i found on the net did not do it for me..i have redhat(EL v4) and hp-ux(11i B v23) servers
i'm able to use remsh from hp-ux to hp-ux with the command
hpux1_srv> remsh hpux2_srv -l hpux2_user uname -n
with remsh from hp-ux to redhat it gives permission denied.
[code]...
View 3 Replies
View Related
Oct 20, 2010
I have a problem about user permission, I just destroy my user...So, I create a new one. But I can't have the permission to use "sudo" or to install program... So, I cannot do a lot of thing in my computer. The logical solution is to boot in failsafe mode and access to the root terminal, but, I don't know how to change the permission to allow me to use sudo.
View 5 Replies
View Related
Feb 8, 2011
Sudo echo fuse >> /etc/modules
Any idea why that'd yield a "bash: /etc/modules: Permission denied" error? Here's what "stat /etc/modules" says code...
View 1 Replies
View Related
Oct 13, 2009
using a terminal
logged into userMan remotely
[code]
scp /file.txt xxx.xxx.xx:/home/userMan/
[code]
Is the syntax above correct?
I'm trying to copy /file.txt from local machine, to server with userMan
error: /file.txt doesn't exist
View 8 Replies
View Related
Dec 4, 2010
Im trying to move some files from my desktop to /usr/share/ProjectM Project M is a visualization program, and Im trying to move some presets I downloaded there. The error I get is
Code:
There was an error moving the file into /usr/share/projectM/presets.
Error moving file: Permission denied
I am logged in as administrator, why can't I move these files?
View 7 Replies
View Related
Jun 3, 2011
I tried to run this: ls * -lag > test1.txt
And it gives me a 'Permission denied' for text1.txt (a new file to be created.)
Now I have admin privileges (in fact I'm the only one set up on it) and I can't figure out why I'm getting this 'Permission denied'. Do I have to create the file first and chmod so I can read/write/delete the file?
View 4 Replies
View Related
Mar 9, 2011
I've just recently started learning shell scripting and I've been working on a basic csh script, but I've been having a few problems. Here's the script
Code:
#!/bin/csh
echo Enter a file name
$< = FILE ##Name of file
echo enter a size (in kilobytes) to monitor
SIZETOMON = $< ##Size value that's input by user
du -k $FILE = $SIZE ##Size of the file that the user wishes to monitor
while (1)
if $SIZE > $SIZETOMON then
echo ALERT: File size is greater than $SIZETOMON
end
And here's the output
Code:
/home/lucer/foo.txt: Permission denied.
Badly placed ()'s.
I'm not really sure what the issue is with the "badly placed ()'s" or why it won't let me access files that I can access with the same shell when it's not in a script.
View 14 Replies
View Related
Feb 19, 2010
I made a new channels.conf file, but when I try to move it to /usr/local/etc it says permission denied, I need the config to watch digi-tv on ubuntu movie player.
View 3 Replies
View Related
Mar 21, 2011
I am attempting to setup an Ubuntu server as a secondary DNS server. It seems whenever it tries to dump the master file the system log shows Permission denied.let me know if more information is needed.NOTE: where it says example.com I have simply removed my actual Domain name.
Mar 21 21:49:24 ulinux named[14418]: zone example.com/IN: Transfer started.
Mar 21 21:49:24 ulinux named[14418]: transfer of 'example.com/IN' from 192.168.0.15#53: connecte$
[code]....
View 1 Replies
View Related
Apr 22, 2011
I am in the www-data group...
Code:
mike@webserver:/var/www$ groups mike
mike : www-data adm dialout cdrom plugdev lpadmin sambashare admin
when I run ls...
Code:
mike@webserver:/var/www$ ls -la
total 8
drwxrwxr-x 2 www-data www-data 4096 2011-04-22 09:30 .
drwxr-xr-x 14 root root 4096 2011-04-20 18:22 ..
-rw-r--r-- 1 root root 0 2011-04-22 09:24 index.html
I assumed that means that the users in the www-data group can read, write and execute within this folder?
But when I try to create a new file/dir I get permission denied message.
I'm having fun messing around with my new LAMP server, but this problem is annoying me now .
(Oh and the index.html file was created by root, it's a blank file and can be deleted)
View 1 Replies
View Related
