CentOS 5 Server :: SVN - Could Not Open The Requested SVN Filesystem [500, #160043]?
Nov 17, 2009
I'm trying to config Apache and Subversion to work together, I did:
1. yum install mod_dav_svn subversion then I had Subversion and httpd installed!
2. create: /usr/local/subversion/repos
create: /usr/local/subversion/repos/test (by svnadmin create)
create: /usr/local/subversion/access/svnauth.conf (by htpasswd)
added to file : /etc/httpd/conf.d/subversion.conf:
<Location /repos>
DAV svn
SVNListParentPath on
[Code]...
View 1 Replies
ADVERTISEMENT
Nov 17, 2009
Ah, the most dreaded SVN error of them all. It's not even showing up in my Apache logs, either, just on trying to commit.
When I try to add a file to the repository via the following command, I get the error:
Code:
add -N F:eetlemed-1.7workspace
ootClientsrccomeetlemedwebappdataContactInfo.as
A F:/beetlemed-1.7/workspace/rootClient/src/com/beetlemed/webapp/data/ContactInfo.as
commit -m "no more broken commits?" (24 paths specified)
code....
It seems that this error only shows up when I try to add a file to the repo, not when I try to update. I've already run chmod +rwx -R repository, so it should have all of the permissions it could possibly need. The only thing I don't know about is adding it to a group. I don't think my server has an apache group, so I wouldn't know where to start and what to do with that.
This problem happens from time to time, but I can't seem to shake it this time. I'm running SVN over HTTPS on Apache 2.x.
View 1 Replies
View Related
Jun 11, 2011
I have Ubuntu 10.04
I made a svn server, if I'm going to address: localhost/svn, and when it strikes an error code...
I took all the information at hand to mark the:
https://help.ubuntu.com/8.04/serverg...ubversion.html
View 5 Replies
View Related
Sep 1, 2011
Ubuntu has officially jumped the shark. I did an update...restarted and got this:
Quote:
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have requested /sbin/init.
No init found. Try passing init=bootarg
[Code]....
View 9 Replies
View Related
Jan 14, 2010
I am going to be involved with a massive filesystem copy from a local to a remote server in the next couple of weeks. There are ten filesystems in involved in this process. All, except one, are one hundred gigabytes in size, with the remaining one at twenty gigabytes.The cp command with the -pr options will be used to copy the directories to their new location. A speed test, involving ten directories, was done to determine the average amount of time it would take to complete the process. The ten directories used in this test ranged in size from 2.3 gigabytes to 4.3 gigabytes. The results indicated the average amount time to complete the copy was around one minute and thirty seconds.
The question I have is the following: Is it better to interactively go to each filesystem and run the cp -pr command there, or should I write a script that will automatically go to each filesystem and run the copy?
View 1 Replies
View Related
Sep 7, 2011
Summary of issue: EXT4 filesystem won't mount--with error = mount: unknown filesystem type 'ext4'. Is no ext4 in kernel the issue? Or is something corrupted?Really perplexed by this. I updated Centos 5.5 to 5.6 to get ext4 (5.6 is supposed to have full support of ext4). I built several arrays and put the ext4 filesystem on them. All went well until I tried to mount them. BTW, this array (below) is set up as a RAID6 using partition 1 of #8 2TB drives.Bear with me here; just trying to be complete and not waste your time.
Attempting to mount give this:[root]# mount -v /dev/md1 /asc/array1mount: unknown filesystem type 'ext4'Note: it does "fake" mount with ption (which apparently does everything except the system call):[root]# mount -f -v /dev/md1/dev/md1 on /asc/array1 type ext4 (rw,grpquota,usrquote)e2fsprogs:Package e2fsprogs-1.39-23.el5_5.1.x86_64 already installed and latest version (for Centos 5.6; CentOS 6x uses the 1.41...)
View 5 Replies
View Related
Aug 2, 2009
I get this error:
Error: requested datatype primary not available
# rpm -q centos-release
centos-release-5-3.el5.centos.1
None of the following actions fixed the error.
# yum clean all
# rm -f /var/lib/rpm/__db*
# rpm --rebuilddb
[Code]....
View 5 Replies
View Related
Sep 30, 2009
i used my windows box to connect to ftp(fed box) and i keep getting an error saying "The requested name is valid, but no data of the requested type was found." does anyone know why i cant connect?
View 1 Replies
View Related
Aug 13, 2009
I have got squid 3.0 stable 13 installed on a new centos5 box .I have used it on other centos5 ones and it has worked really well.It didnt give any error messages during installation on this one until i used the proxies in the browser.I have used it on other centos5 ones and it has worked really well.But with this box I am getting this error in browser-The following error was encountered while trying to retrieve the URL:Yahoo!Socket FailureThe system returned: (99) Cannot assign requested addressSquid is unable to create a TCP socket, presumably due to excessive load. Please retry your request.I have tried many options for http_port but to no avail.I have never seen this error before with and am totally clueless
Excerpts from cache.log
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2009/08/13 05:57:17| Squid Cache (Version 3.0.STABLE10): Exiting normally.
[code]....
View 2 Replies
View Related
Mar 5, 2011
I installed squid on my centos and I tried to follow some guides but it still gives the same error
Quote:
ERROR The requested URL could not be retrieved
While trying to retrieve the [URL]...The following error was encountered: Access Denied. Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
[Code]...
ZON-BFC0 is the name presented in my wireless connection, plus the actual ip I'm using there is the ipv4 I found with a quick "ipconfig" search on DOS.
View 7 Replies
View Related
Mar 19, 2010
I have install apache,php,mysql and then I have installed the phpmyadmin by issueing the command in terminal sudo apt-get install phpmyadmin
After this ,in my web brower i type... localhost/phpmyadmin ,it give the error message "Not Found
The requested URL /phpMyAdmin was not found on this server. Apache/2.2.12 (Ubuntu) Server at localhost Port 80"
View 8 Replies
View Related
Mar 7, 2010
today there was problem with isp but we fix it now other machine run internet fine but when we run through squid proxy machine it give this message to all users. what fields column values config i should check it. i also reset the cache make empty folder. restart machine also service clear the logs . it is on centos 5.4
see below message
ERROR: The requested URL could not be retrieved While trying to retrieve the URL: [URL] The following error was encountered: Read Error
The system returned:
(104) Connection reset by peerAn error condition occurred while reading data from the network. Please retry your request. Your cache administrator is root.
View 1 Replies
View Related
May 13, 2009
Just installed a new CentOS with the control panel Interworx. Everything fine, BUT. I can't add new ipadresses cause there is no network device.When i do 'ifconfig' i get the following:
[root@cobra ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1C:C0:A7:25:9F
inet addr: Bcast: Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 1 Replies
View Related
May 26, 2009
I am in the process of writing a web-application using apache,mod-python and cheetah. I installed apache2, mod-python and cheetah and also enabled the userdir module in apache2 so that i can host the webpages inside my public_html folder.
The public_html folder has a folder named 'site' which gets displayed when I type "url" in the browser. There are subfolders inside this 'site' folder and the site folder also has an index.html page inside it.
But when I click on the site folder in the browser, I get a 'Requested url /~myusername/site/ not found'. There are files inside the folder with 777 permissions and still I get this error.
I use Ubuntu Jaunty with the following configuration - 'Apache/2.2.11 (Ubuntu) PHP/5.2.6-3ubuntu4.1 with Suhosin-Patch mod_python/3.3.1 Python/2.6.2 Server at localhost Port 80'.
These are the lines I have added to the /etc/apache2/sites-available/default file
Code:
<Directory "/home/myusername/public_html/site/">
SetHandler mod_python
PythonHandler mod_python.publisher
PythonDebug On
PythonAutoReload On
View 1 Replies
View Related
Jul 17, 2009
I use CentOS 5.3 and trying to change limit of max. open files.I added in /etc/security/limits.conf
root soft nofile 50000
root hard nofile 50000
View 3 Replies
View Related
May 3, 2011
I neet to install a cgi script in my CentOs 5.5
So after compiled the cgi script, I put it in the folder /var/www/cgi-script/
I try to access via my web browser and in the apache error log : I have this "/var/www/cgi-bin/mapserv" : error while loading shared libraries: libclntsh.so.11.1: cannot open shared object file: No such file or directory"
In my httpd.conf, I just add the following in order to provide the shared libraries for my cgi script :
<Location "/cgi-bin/"
SetEnv /home/hmonglee/instantclient_11_2
</Location>
But same error.
View 1 Replies
View Related
May 4, 2011
Newbie here! Our website CMS is a Tomcat webapp, which runs on a CentOS 5.6 release (Final). The webapp needs a permanent increase of the max. open files value. Currently, the site is "crashing" frequently due to continuous "Too many open files" exceptions that eventually will occur when traffic increases.
This is what I've done to try to increase the max. open files value code...
But still, when I log in (as any user, incl. root), ulimit -n shows 1024, not 16384. Am I missing something here? And, more importantly; Will Tomcat be able to open > 1024 files after my changes mentioned above?
(PS: I also tried rebooting, but no difference.)
View 1 Replies
View Related
Dec 17, 2010
When I go Places -> MountedDrive Rhythmbox opens and tries to load the whole thing...how do I make it open in Nautilus again?
View 2 Replies
View Related
Jan 14, 2010
I have a crippled file system after a disk failure and attempt at repairing. Currently the Web Server is running, however I cannot open the filesystem to explore files and view. I am going to do a fresh install this weekend and upgrade system. I have two questions I hope this forum will help with. (Installing new disk and entire server)
1). Can someone tell me how I could copy the http.config file so that I can view my settings from terminal (This took me forever to get right for my environment to get shtml and cgi files to run correctly and I don't wish to lose). I am running Fedora 8, I'm also not sure of the location. (I'm fairly new to linux and not great with the terminal, however that is the only access working.) It would be great if someone added the terminal commands. If I can copy them I could email to my email address.
2). In the past when I have copied web files (web sites) over to the www directory the permission would be incorrect. Is it possible to write some of the web sites to CD (Disk burner is working) and then copy to the new system with permissions correct? Would you give a little how to all web sites are in the www directy. I think that is etc/www/"webdomain name" One thing I might add is all drives will fail it is just when...
View 3 Replies
View Related
Mar 8, 2011
Whenever I want (for example) save a file from the internet with Firefox, I can't because Firefox does not open the "save as" window of Dolphin. Also, when I want to save my bookmarks in Firefox, I can't because Firefox can not open the "save as..." window.
There is no failure message, no crash, just nothing. Like as the request is simply ignored. Any Ideas what might be wrong in my system? The system is OpenSuse 11.3 64 Bit with KDE 4.6 and all current updates.
View 6 Replies
View Related
Jan 31, 2011
I have installed ubuntu to my pc. i made 3 partitions. one for system, one for data and one for swap. two of them were ext4. after some time i have reinstalled ubuntu again. but this time i didn't put to format the second partition, but just mount it using ext4. after that i cannot open my files. checked with gparted shows that 2GB used, but with df 188MB. and in properties writes ext3/ext4 filesystem. i used chown, chgrp but didn't help. please help, these data are ver important. i cannot lose them.
View 7 Replies
View Related
May 18, 2011
I am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
View 2 Replies
View Related
May 8, 2010
Since upgrading to Lucid, I am getting the following dialog warning on login: 'Could not apply the stored configuration for monitors X Server does not support size requested' Im using the current proprietary NVIDIA graphics driver with dual heads. My display is fine, but the warning every time I login is annoying. After googling around I found this thread: [URL]. I tried going to Monitor Preferences as suggested. My resolution as displayed in the default tool is set to 3840 x 1200, which I suspect is the issue forcing the dialog, but I cant change the resolution, refresh rate or rotation from the Monitor Preference dialog box. dino99's response (in the referenced post) about xorg.conf not being needed anymore seems relevant. How can I resolve this issue and get rid of this annoying warning? Is there a configuration that I can update with a supported resolution to placate lucid?
View 9 Replies
View Related
Nov 21, 2010
I'm doing an upgrade of a web based application for a charity organization. To test the changes that we're making to the code, I wanted to set up a server on my home PC to host a copy of the site. I've configured apache, php and mysql like the server that's currently hosting the real app, but I have a problem:The first page is a login screen. This, of course, has a login form like so:
Code:
<form id="login" action="/menu/login" method="post">
<fieldset class="a_cuatrocincuenta">
[code]....
View 8 Replies
View Related
Apr 27, 2010
I am having a hard time with samba. Please point me in the right direction! I cant seem to get the web configuration tool working either.
smbclient -L teraquad
Server requested plaintext password but 'client plaintext auth' is disabled
session setup failed: SUCCESS - 0
smbclient -L teraquad -N
Domain=[OFFICE] OS=[Unix] Server=[Samba 3.4.7-58.fc12]
code....
View 2 Replies
View Related
Sep 26, 2010
Ok For some reason I open my ports in security and firewall. I open ssh and other ports and port 7001 for example but when I go to check to see if they are open or try to connect to them. It shows that they are still closed. I am using - [URL] Also yes my ports are open on my router. I know my router works fine with opening ports because I have shoutcast setup on another computer with xp that is currently running. I am willing to pay for who can ever get this fixed for me...
I open the ports in graphical mode.
View 15 Replies
View Related
Jul 17, 2009
I have 64bit install with CentOS release 5.3 (Final)It's been stable for about six months. What happened a while ago is really weird, I haven't messed with anything lately but the entire /home filesystem became read-only. Can't write, can't delete to anything on /home. The other filesystems are fine. I am root, and the permissions look normal. My directories and files are writable and readable.
root@atlanta [/home]# touch foo.txt
touch: cannot touch `foo.txt': Read-only file system
root@atlanta [/home]# ls -l
[code]....
View 7 Replies
View Related
Jul 13, 2010
I've a webserver with a lot of documentary to serve. Some of the users have problems with the new microsoft documents like docx. Internet explorer 7 want to open the file like a zip-file not as word document. I've googelt around and found a solution that didn't work for me: [URL] I've added at /etc/mime.types
[Code]....
After a restart of httpd , nothing chance, always the same failure with internet explorer 7.
View 4 Replies
View Related
Jul 16, 2010
I am working on a NFS server embedded on a PowerPC plateform (4650EX, 512Ram, 1 GB Ethernet) but i can't mount my exports folders from my client. Here are messages :
[Code]...
View 2 Replies
View Related
Mar 2, 2011
I have installed Centos 5.5 running in VMware on my windows PC. My PC is part of a network which connects to a Linux Fileshare system. I am wanting to connect to the existing Linux fileshare from centos. The know the fileshare is NFS and I know the IP address and directory name. I attempted to connect using the 'mount' command as#mount -t nfs <server IP address>:/<directory> <local directory>An attempt was made to mount, however it is username/password protected. I have gone through the docco for 'mount' and cannot find anyway of passing <username><password> with 'mount'. Does anyone know how? Or am I using the wrong command?
View 3 Replies
View Related
