i have been following the guide below to setting up mail on Debian. All has gone so far ok, until I get to the part where you have to paste the following into the dovecot.conf file. If i try to restart dove cant it say it doesn't understand or cant recognize the line about mechanisms but i have checked this out word for word and it matches the guide so whats going on. The site it got the guide from is below.
[Code]...
How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies View Relatedi basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 Replies View RelatedCan this be done? A company is currently running a postfix mail server. They got a new server and, while the users are migrated, they need to have the messages delivered on BOTH servers.
I thought it could be easily done in postfix: deliver locally AND forward mail to new server, but all solutions I found would deliver the messages in just ONE place.
I am completely new to Debian . My aim is to get one of my machines to run this system as the intranet server including www server, mailing server, intranet server and LAMP at the same time on the small network. I have found some resources including how-to's how to install Debian as the normal operative OS not as the intranet server. I have also found this: [url].However that is applicable for the 'Mandrake' distribution (Mandriva). Now, I would like to ask few questions that will be applicable not only for me but for more users and if someone could answer them .
1.What installation source shall I choose, CD/DVD/Network Install CD?
2.I have found this: [url] ... troduction is that applicable?
3.How to install web server, mail server, LAMP and configure them, link above describes mail server installation not configuration itself.
4.How to configure intranet on Debian to work as the server serving the Windows clients (using Samba?)
If someone could propose a set of the sources or the instructions how to achieve all of the steps I would really appreciate that. Also, if sources will be given by the users I shall try to achieve what I want and write up 'how-to' for this problem. Therefore, me and other users would benefit from that.
How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
View 6 Replies View RelatedThere is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies View RelatedI've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
I have a domain name and also a no-ip domain that points to my web server. I am just wondering if it would be possible to implement so I can have a play with some mail servers and get some experience of them.
View 3 Replies View RelatedI would like to set up a mail and instant messaging server running on squeeze.It will be running on a 1ghz celeron (pentium 3 era) with 1gb ram and 10gb hdd (I'm assuming these are high enough specs) It will have less than 10 accounts and probably no webserver (not sure if good idea). I am also unsure of what IM protocols would be best for this. I would prefer to do all this from the command line if possible (so long as it's not too hard) and preferably from a remote machine (so SSH?) I prefer IMAP if possible but pop3 and smtp are also fine. I would also like to be able to connect remotely with encryption (not a big requirement -just a nice feature)
View 4 Replies View RelatedI have machine which manages all mail accounts and their traffic and as well mysql database and some more stuff. Theres also windows server where users are managed and they get their programs from over rdp. I have login screen on Linux machine. It says Debian GNU/Linux 5.0. And I have root password, but I know that I have to login first with simple user account after which I can access login as root. But where can I get simple user account info. I need to manage mailaccounts mainly there.
View 3 Replies View RelatedOn my Seagate DockStar torrent box running Debian Squeeze, I want to send email when a torrent download is done. What email client is good if I want to send e-mail via gmail server?
View 3 Replies View RelatedI would like to run a mailing daemon on my system that would receive incoming mail and forwards it to my Gmail account. I have no experience in mail services and forwarding mail at all. where to start reading and/or look for clues?
View 3 Replies View Relatedi need to install a mail server with the following requirements: smtp, imap, web administration interface (users management to be done by a non-specialist) and ... to be easy enough to install/implement on debian (this is one time deal for me ...)
i used until now Xmail, phpxmail and nocc, very easy to install and it was working flawlessly, but unfortunately nocc is a too poor webmail client be cause is based only on pop3 literally the requirement is that on the web[client] mails sent must be saved and from what i see on webmail that only can be done with imap and (this is the big problem) Xmail does not support imap so i cannot install a good webmail client
i am looking for a guide to setup a mail server on my domain (company.net) so i could have some accounts like
[URL]
and i was wondering how i can make it , and if there a webmail interface to control my emails.
P.S. this is server located at my home so i have full access
I would like to discuss setting up a mail server and its implications and alternatives. First, let us see if I have understood this correctly: A mail server consists of many different components. First, a server to listen to any mail inbound for a specific domain (say postfix), and then a POP3/IMAP server (say dovecot). Then, I should somehow configure the rules by which all mail is forwarded to their respective owners. This should be fairly simple by using debians package managers and dselect or whatever program it is that sets up right packages by use cases at the install.
But now lets assume a more complicated environment, where there are multiple users with different domains and needs. First, we need to send mail to ourselves from webapps for instance for backup purposes. So let's say we have a domain called domain.com setup, and we want to send mail to backup@domain.com. Unfortunately, some configuration issue makes the application get confused, because it is trying to send mail to itself, but doesn't quite understand what it should do. How can this problem can be solved?
Second, how could I configure different domains with different rules. For instance, if I want one domain to have a catch-all account, where random email sent to erroneous accounts is captured? Or if I want to create accounts which are not based on actual Debian accounts, but instead just random usernames (say, danny@domain.com, mike@domain.com, support@domain.com etc.)?
Finally, which are the best web-guis for doing such configuration? What if the customer wants to himself add accounts? I cannot require him to edit text files - especially if he can thus break the whole configuration for other customers as well.. postfix-admin is one, but it is quite crude-looking. Is there something which integrates both postfix, apache and dovecot configuration? How about Webmin?
I opened a thread about this issue over two months ago, I opened thread at the Gnome board for the same issue but that board is dead. I never received a reply of any sort. Well Evolution used to work for me but after some updates it stopped working. A few weeks after that another update fixed it then another update came along and of course screwed it all up. Since then I am hoping some new update will fix it but no can do.Since my trouble started Evolution was even updated to a new version 2.30.2. Evolution does not connect to my mail POP server, as a matter of fact "send & receive" and the little icon bottom left on the status bar are grayed out. I have removed gnome and evolution and reinstalled with no results.
I switched to Icedove but when I forward emails Icedove gives me a header that is 10 times longer than the contain of the email itself. I could live with that if I only send emails to family and friends but I also send professional emails. I ended up installing a copy of MS Outlook for now but I really don't like it.
I want to install configure and run my own mail server in my debain box, but I don't know which programs to install(This is my first mail server installation). I found on internet some how-tos for install postfix-dovecot-squirrel mail, but I am not sure that I want dovecot(I prefer courier email server if it is the same).
As I understand I need
smtp mail server -> postfix Mail Transfer Agent
imap and pop3 -> dovecot / courier email server?
webapplication -> squirrel mail
For squirrel mail I am sure that i will install it(I used it on other server and I like it), but don't know for other parts. I read that postfix is good choice, but what other options I have for dovecot?
I'd like to burn DVD (my pictures and some data) with a possible strong protection mechanismus, to prevent of DVD media copying and not pictures data copying. Which program can I use under Linux?
View 10 Replies View RelatedIs there any way to provide different methods of authentication on a apache directory (used for webDAV). I need it to use htpasswd and winbind, can't find any guides on implementing them both. Basically domain users need to be able to access the webdav and other users (who will be provided with a username and password NOT on the domain).
View 1 Replies View RelatedCould anyone point me to some simple articles that explain what email encryption is and how to set up a mail server (e.g. Exim) that can send secure emails? I know nothing about networks, mail servers, encryption, etc., but I have to be an expert on it before I walk into work tomorrow morning.
View 14 Replies View RelatedI was wondering if there was some kind of anti-spam proxy available for debian, that could serve as a layer between my ISP's mailserver and my email client. Something light, as it needs to be installed to a guruplug server with not much storage available. It would be great if I don't need to configure a fully fledged mail server but if it can function on it's own, only filtering spam messages. I already found assp and qpsmtp, but I find these very difficult to setup and assp is like huge.
View 1 Replies View RelatedI just went through a painful upgrade from 8.04 to 10 LTS. I've made a lot of progress but am still having email problems. Dovecot seems to not be able to run, the log is continually reporting:
Aug 22 23:47:34 amd64 postfix/smtpd[22298]: fatal: no SASL authentication mechanisms
Here's this section of dovecot.conf:
auth default {
mechanisms = plain login
passdb pam {
}
[Code]....
Howto find out protection mechanisms from the protected CD or DVD media?
View 6 Replies View RelatedI have installed F11 on my server bythis article! I have problem with certificatewhen I connectin from clients computers to my mail server for reciving mail! I have warning like this
View 2 Replies View RelatedI have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
Code:
westwood@westwood-desktop:/etc$ tailf /var/log/mail.log
Jun 1 19:00:33 westwood-desktop postfix/smtpd[2376]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN
[code]....
Our primary mail server is Exchange 2003 Standard on Windows Server 2003 Standard - don't shout at me; I inherited it already set up this way.I have a couple of hardware identical redundant servers (HP ML350 boxes), all with very fast 2 or 4 disk arrays, multiple core CPUs and plenty of memory, and I am looking at two potential new additions to the infrastructure.
A secondary mail server is high on my list of priories. I've been well and truly bitten by Exchange in the past and given that this particular box has been running four years straight and that it's mail store is dangerously large, having a secondary mail server in place suddenly makes a lot of sense.
A new Exchange 2010 box is currently being set up, but the secondary mail server will remain in place even when the new Exchange server is brought online, so this won't be a wasted exercise.... I also want a gateway box in place to filter and relay mail to the primary server, or to the secondary server if the primary is unavailable. Currently our outer perimeter is:
ISP supplied CISCO router
Draytek VigorPro 5510 UTM
Untangle running in bridged mode (primarily used for SPAM filtering, URL blacklisting, and very little else) Exchange 2003 sits behind the Untangle box. This is how I want to end up:
CISCO >> Draytek >> Ubuntu gateway >> Exchange/secondary mail server
I know I could replace/remove the Draytek but I want it to remain for several reasons, including lots of VPN dial-in users already configured and that it offers us an additional layer of email antivirus scanning before things hit the Exchange box. No point switching all of our remote workers over to new tunnels unnecessarily...
I have done some research and have started testing a pilot secondary mail server using Ubuntu/postfix DNS is properly set up and MX records and reverse PTR records are all present and correct, and things are looking encouraging so far. Before I go out over deep waters and start to flounder, has anyone who has done something like this got any obvious howlers I should be looking to avoid ?