General :: Launch Disk Druid After CentOS Installation?
May 20, 2010I have installed CentOS on my system.I am unable to locate 'Disk Druid'.Kindly suggest the way to launch it.
View 2 Replies
ADVERTISEMENT
General :: Make Disk Druid Take GB Instead Of MB?
Mar 26, 2010I've tried to reload a server 3 times, every time I try to setup 4 and 6GB partitions through the disk druid gui during RHEL install by entering 4096 and 6144MB, i end up with partitions showing 3.9GB and 5.9GB when i do a df -h after it boots. Is there a way to make disk druid ask for GB instead of MB during the install process so i can just type 4 and 6 and it will show up right in a df -h.
View 14 Replies View RelatedGeneral :: Access Disk Druid Once All Of The Partitions Have Been Created In Rhel 5.3?
Feb 12, 2010is there a way to access disk druid once all of the partitions have been created in rhel 5.3?
View 3 Replies View RelatedCentOS 5 :: Install CentOS 5.2, And The Installation Ran Out Of Disk Space After Running For About 2 Hours?
Feb 18, 2010I am trying to install CentOS 5.2, and the installation ran out of disk space after running for about 2 hours.I checked the FAQ, and it said 1.2 GB. The disk is 3 GB. The default install was selected, and I think that it checks for sufficient available disk space before installing. Still, it ran for quite a while before announcing that it was out of disk space.The Installation Guide is not very helpful, since there is a blank page where the disk space requirement is supposed to be. I just picked the default installation. A search of the forums on "not enough disk space" did not return much.
View 13 Replies View RelatedCentOS 5 :: Generate An ISO And Burn Into A DVD To Make A New Copy Of 5.4 Installation Disk?
May 19, 2010Previously I have Centos 5.3 installed. Eventually I upgraded the systems to Centos 5.4 Now is it possible to generate an ISO and burn into a DVD to make a new copy of Centos 5.4 installation disk? This is far better than downloading.
View 1 Replies View RelatedServer :: CentOS VPS Looking To Launch Firefox?
Jun 4, 2011So I recently got a VPS from hostgator and am now looking to get xwindows or xorg installed so that I can launch firefox from my VPS, the issue is that I don't want to install a complete desktop environment. Is there a way to accomplish this? I have enabled X11 forwarding in ssh and in the putty session, but continue to receive errors about displays.
View 1 Replies View RelatedGeneral :: CentOS 5 - Available Disk Space Always 0 Percent
Jun 16, 2011I am running centos 5. So far, it gives no problem but just yesterday, when it reported "no free space" for file writing, I try to remove some file as usual. Unfortunately this time no matter how much files I had deleted, it just keep showing no available space for doing so.
Result from df:
[root@LSMSVR ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
1.2G 269M 879M 24% /
/dev/hda6 4.8G 138M 4.4G 4% /tmp
/dev/hda5 19G 2.4G 16G 14% /usr
/dev/hda3 48G 12G 34G 25% /var
/dev/hda2 379G 365G 0 100% /home
/dev/hda1 99M 15M 80M 16% /boot
tmpfs 180M 0 180M 0% /dev/shm
ow to recover the lost space in /home?
General :: Mount An NTFS Disk In CentOS 5.4?
May 2, 2010How can I mount an NTFS disk in CentOS 5.4? I did 'yum list | grep -i ntfs', but that doesn't show any ntfs rpms. Does CentOS support NTFS filesystems?
View 4 Replies View RelatedGeneral :: CentOS 5.4 - Disk Usage Information
Mar 16, 2010I am trying to get my head around my new server. I am using CENTOS 5.4 x86_64 with 300GB harddrive.
The 300 GB been partitioned with the following:
Device Size Used Available Percent Used Mount Point
/dev/md0 99M 18M 77M 19% /boot
/dev/md1 16G 8.7G 5.8G 61% /
/dev/md2 246G 40G 194G 18% /home
/dev/md3 4.8G 1.6G 3.0G 35% /var
/usr/tmpDSK 3.9G 432M 3.3G 12% /tmp
I have increased teh tmpDSK as it was getting full very quickly. My question is, what are these md0; md1, md2 and md3 are they harddrive partitions and as md1 is getting full will that have an impact on my sites.
General :: CentOS 5.4 - LVM Data Copy To Different Disk
Jan 26, 2010I've got a CentOS 5.4 box and the following disks connected:
# parted /dev/sda print
Model: ATA WDC WD1600BEKT-0 (scsi)
Disk /dev/sda: 160GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 107MB 107MB primary ext3 boot
2 107MB 160GB 160GB primary lvm
# parted /dev/sdb print
Model: ATA WDC WD1200BEVT-0 (scsi)
Disk /dev/sdb: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 107MB 107MB primary ext3 boot
2 107MB 120GB 120GB primary ext3 lvm
the OS, data and programs are on /dev/sda.
I'd like to copy the full directories and files to the newly added /dev/sdb wich has, as you can see, less space. Also note that /dev/sda has only about 3.6Gigs uses, so it will no doubt easily go into /dev/sdb. How can I do the full copy, and yet make /dev/sdb bootable just like /dev/sda (just as if it was cloned by Ghost)? I've checked dd, but AFAIK, it needs that both source and target devices be the same in size.
General :: Move Centos To Another Hard Disk?
Jun 3, 2010Move centos to another hard disk?
My box is centos 5.4 x86 on one hrad disk. Now I have a problem at this hard disk, so I want to ove centos to another hrad disk.
But backing up centos and restoring them another hard disk is not so easy and takes so much time.
I heard Partimage" can backup hrard disk and restoring it to another hard disk.
[URL]
My box has one LVM composed 3 partitions on one hard disk.
Can I move centos to another hard disk with partimage?
CentOS 5 :: Redistribute A Disk Without Loss Of Data Namely It Is Necessary To Make / Boot And Two Equivalent On Disk Volume?
Aug 24, 2009There is a disk 500 gb, it is broken on /boot and on /root and on /dev/sda1 and /dev/sda2. Whether prompt it is possible to redistribute a disk without loss of data namely it is necessary to make/boot and two equivalent on disk volume.
View 3 Replies View RelatedGeneral :: Retrieving Files From Damaged LVM Disk On CentOS 5.5?
Nov 3, 2010I'm running CentOS 5.5.
A couple of weeks ago, my 500 GB disk crashed after suffering an accelerating error rate for a couple of days.
Now that I have a new disk in place, I want to mount my old disk, which is (was) an LVM disk, as a second disk and recover files from it if possible.
The question is, how do I go about this?
If I mount the old disk:
# mount /dev/sdb1 /sdb1
the top-level directory shows only two subdirectories:
lost+found, which is empty; restored, which is an image of files recovered from old disk's predecessor.
'df' shows (or appears to show) that the disk is 11% full. Sorry, I don't recall how full the disk was before it crashed.
How do I get the system to recognize the LVM structure on the old disk & mount it?
Or is the directory structure too corrupted? Do I need to send the disk out to a recovery service?
P.S. Have aleady done some poking around with lvmdiskscan, which shows the old disk whether it's mounted or not, and vgchange -ay, which doesn't appear to do anything.
General :: CentOS 5 - Custom Hard Disk Partition?
Mar 3, 2011I want to install Cent OS5 on my machine. The Hard Disk is SATA. I want to discuss about how to custom partition the hard disk. In the old version there is a drop down list for manual partition the hard disk. like /,boot,swap,var etc etc. In the new version of centos 5 I can not see things like that. During installation process and in partition page there are things like:
Code:
Remove all partitions on selected drives and create default layout.
Remove Linux partitions on selected drives and create default layout.
Use free space on selected drives and create default layout.
Create custom layout.
When I choose custom layout it show me an error message. "An error has occurred-no invalid devices were found on which to create new files system. Please check your hardware for the cause of this problem."
CentOS 5 :: Launch Bash Script On User Logon?
Nov 12, 2010What is the best way to lauch bash script on user logon and logoff?
View 1 Replies View RelatedGeneral :: How To Replace Hot Plug Disk In CentOS 5.4 With Dell Servers?
Aug 5, 2011I am running a server in Dell which has RAID1 and hot plug 2 disks. It's been running for a while, but I was thinking it may crash anytime. So got a spare one, and wanted to test it how it works.I have never done this before. Can I simply, on a running machine, unplug the Disk 2 and connect the new Disk there? (Without interrupting the service as a silent mode?) Or does it have to be shutdown first, and unplugged, reinstalling all software/centos/etc etc? How do you do this update? Also how do you know when you replaced the disk? Do you have anything special to monitor that disk 1 or disk 2 is end of life?
View 1 Replies View RelatedGeneral :: CentOS - Disable Disk Check In Mounted USB Drive?
Aug 6, 2010Is there a way to disable disk checks in a mounted usb drive? I have a 500GB usb mounted drive in my CentOS machine and everytime I reboot my system, it does disk checks which is a long painstaking process.
/mnt/sdb1
CentOS 5 :: Automaticaly Launch Tomboy When The User Open Session?
Aug 5, 2010I would love to auto-start tomboy at startup. How can I do this ? [Moderator edit: fixed Subject so nobody would expect an automatic Lunch. Is that the same as a free one? ]
View 2 Replies View RelatedCentOS 5 Hardware :: Installing CentOS 5.3 Using Custom ISO And Drive Disk?
Nov 10, 2009I am having new hardware and IDE driver for that hardware as drive disk image (it8213_centos53.img). CentOS 5.3 installation is working fine with drive disk image at USB and CentOS 5.3 at DVD. Our application uses CentOS 5.3 and we build a custom kick-start ISO for installations. Using that ISO client is going to install on all hardware boxes.
Note while installing :
a) No network connection is avalible.
b) No USB isavalible.
c) No floppy is avalible.
d) Only single CD-ROM is avalible.
So, is it possible to build single custom kick-start CentOS 5.3 ISO which contains dirve disk image and entire installation will be done using that image. If so please let me know the steps to build it.
CentOS 5 :: Daily Backup Of CentOS Server To Disk?
Oct 6, 2010I'm looking for a simple solution to backup my CentOS Server (5.x) on a daily base to a mounted disk. I found the glastree tool but I have no clue if it will work on CentOS.All recommendations, tipps, hints and maybe scripts are welcome. Unfortunatelly I'm an Linux newbie and starting with Linux CentOS a couple of weeks ago
View 1 Replies View RelatedCentOS 5 :: Can External Sun UltraSCSI Ufs Disk Be Mounted On CentOS
Jun 26, 2011I need to read information from SUN hard disks which are about a decade old. My CentOS 5.6 mount command comes from util-linux 2.13-pre7."mount -t ufs -o ufstype=sun /dev/sdb2 /New" reports "mount: unknown filesystem type 'ufs'", though its man page describes such settings.How could I read an external UltraSCSI hard disk (yes: high pitch noise and only 9 GB capacity) on a current CentOS? Is that possible at all?
View 1 Replies View RelatedCentOS 5 :: Cannot Install CentOS On Large Disk (> 8 TB)?
Apr 20, 2010I have a server with 10 disks 1TB with RAID 5, and I want to install CentOS 5.4 on this disk, but fail
View 2 Replies View RelatedCentOS 5 :: Running Centos From USB As Hard Disk?
Sep 1, 2010I have seen that is possible to boot from a USB stick and use a USB memory as hard drive.I have a server enable to hold 6 sata drives 3.5", But I want to use the 6 drives and make a Raid-5 setup for backups 5 -1 spare. /boot cannot be on a raid-5 level 0 or 1. But I want to have redundancy for my OS, them I can install Centos on a Raid-1 using 2 disk, which let me only 4 for the raid 5. I will run a backup I want to have a lot of space.
Using 4 disk for raid-5 2 TB I will have 6TB no spare, no spare is not a good option at least I will prefer 1 spare.Well, I was thinking, the server MoBo have USB support, if I open the box I can see the small entrances, If Centos let me installed on a USB memory drive, can I trust a USB memory stick?t night with bacula.
Ubuntu Installation :: 9.10 - Non-system Disk Or Disk Error With Manual Partitions
Apr 9, 2010This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
Ubuntu Installation :: Error "pyrun.exe - No Disk There Is No Disk In The Drive
Jun 14, 2011I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies View RelatedDebian Installation :: No Boot Disk Has Been Detected Or Disk Has Failed
Nov 3, 2015I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
Fedora Installation :: Installing On New Disk But Killed Old Install Of Fc8 On Another Disk
Mar 15, 2009I have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?
View 14 Replies View RelatedUbuntu Installation :: Unplug Disk, Can't Boot Winxp Disk?
Aug 22, 2010WinXp sp3 is on disk sdb, then installed Ubuntu 10.04 on sda, can go into diff OS without any problem. I am going to move sda to another machine, when I unplug sda, WinXp can't start to boot on sdb. How to fix it?below is my case output$ sudo fdisk -l
Disk /dev/sda: 160.0 GB
...
Device Boot Start End Blocks Id System
[code].....
Ubuntu Installation :: How To Launch Program?
Jun 10, 2010The program is called the GNU C++ Compiler. I tried typing it in the terminal and pressing tab, but got nothing. How do I launch the program?
View 6 Replies View RelatedUbuntu Installation :: Migrate Working Single Disk System To Existing RAID Array Using Disk UUIDs
Aug 1, 2010I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.