suppose i have a website named www.site.net now i want to access this website using proxy server(squid,or etc...) under my personal server named www.anotherwebsite.net:8080, means that www.site.net.
View 1 Repliesi have a website named [URL]... now i want to access this website using proxy server(squid,or etc...) under my personal server named [URL]...means that [URL]...
View 4 Replies View RelatedI set up an apache webserver on a redhat enterprise server 6 last week. It works fine on the localhost. However, the webpage can't be accessed from the other computer. I didn't modify anything related to 'allow,deny' in httpd.conf. The only thing I've done is I added a rule in iptables to approve the access from a computer with a specific IP address. Since I am quite new to iptables, I don't know if there is anything wrong with my setting.
Even I stop iptables, the problem is still there. I don't know if my setting of iptables is correct. Or, there is anything else that I should do?
My company is using Squid Proxy 2.6 for internet connection. Recently we implement a Webmail system. This is the link [URL] can access it using computer directly connect to internet but those using Squid Proxy are unable to Login although the login screen appear. Is this cause by the squid.conf setting or something else?
View 1 Replies View RelatedI have set up a 5.5 installation on a Virtual box VM. The Virtualbox (not for the VM) network preferences have DHCP Server disabled and IPV address and the network mask I believe are valid for my home network. My VM is up and running and it has gotten an IP address from my home router and everything seems fine. From any machine in my house I can ssh into my centos installation. I went ahead and started up the httpd service and the website is up. IOW, I can see it from my centos box - when I navigate to http://localhost However, I cannot see it from any other machine on the net. The IP address of the centos bos is 192.168.0.141. From the centos I can do a ttp://192.168.0.141 and see the Apache 2 test Page. I can see that from anywhere else. Although I can ssh to that machine.
View 4 Replies View RelatedI'm rather (VERY) inexperienced when it comes to Linux, but Fedora 14 is the environment I have to use on my laptop at work, so please forgive any dumb that comes out of me.
How do I tell php to send an email with mail() using an external mail server?
The situation: I've got apache/php running a webserver on my local machine. It's for dev purposes only, and the website files I'm using are checked out from our SVN. This lets me make changes to our website while not actually changing our website.
I've come across an issue I'm fixing where I need to verify that an email is successfully getting sent out, and unfortunately, this email is sent out using php's mail(), and not our website's usual $mail object. Unfortunately, I don't have the authority to change how this sends out right now, just when it sends out.
I've been running everything fine on my machine for a month now, and haven't needed the mail stuff until now. How do I tell php to send an email using an external server?
I have got a running mail server on CentOS5.4 Final using Zimbra free edition. . Assume that domain is organization.com.local And it is running fine with users created and bugzilla running on the same machine can send mails using this server. But it can obviously send messages to the internal users. There is this option to configure it to use external mail server to send mails outside the network but my external smtp server needs an authentication.Is it possible to configure it this way to use my external server to send mails from internal domain to say gmail?
View 15 Replies View RelatedI try to config my apache server to list all my files: c/c++, php, java files, like the txt file on my server,
e.g /var/www/mydomain/pub
i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name,
if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file,
Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
View 1 Replies View Relatedhow you I can configure sendmail to use 2 different configurations of virtusertable as access was being made from internal and external institution?
View 5 Replies View RelatedI've got a Joomla website made for me. It is hosted with a hosting company. Here and there i change some of its content, but i want to practice it locally on my computer before i do bigger things on the web, so that if things get into a serious problem it is close at hand to fix it up. I've installed apache2 php5-mysql libapache2-mod-php5 mysql-server on my Ubuntu 10.04 desktop. also, I've installed Joomla up and running.
My question is: how do i transport/copy my website from the web into my computer?
I know that I need to transfer the database, where do i put it in my local file system, and what additional commands are required for that?
I know that I need to transfer the public_html, where do i put it in my local file system, and what additional commands are required for that?
I have a debian machine with an apache2 webserver. I am able to start the machine from the internet (power plug board with webinterface) but I don't know how to shutdown the server automatically if nobody uses the website anymore. It is a homeserver which should only run if needed.
Unfortunately I don't know much about Linux, apache, php, cgi-scripts, cronjobs and other things that might be useful. But I googled a lot and have now an idea how it could work. It seems complicated to me and so I want to ask you guys what you think about it and if perhaps you could give me a hint.
The idea: A cronjob starts every ten minutes a php script that checks when the index.html of the welcome-page was opened the last time (fileatime()). Lets say it was opened last time at 3pm. Then the php script adds for example 60 minutes to that time (=4pm) and calculates how much time is left to 4pm. This time is saved in the variable $timeleft. Now the php script compares if $timeleft is less then 10 minutes (=600 seconds). If it is, the php script starts a cgi script that will shutdown the server. The cgi script will login as root (I think that can be done with the "expect"-command url and then enter the command "shutdown -h now"
Is all this realizable? Isn't there a better and/or easier way to do?
How can I view server signature on my website.
View 7 Replies View RelatedHaving a problem on all of my Ubuntu machines when i goto this address: [URL]... i get a "server not found Firefox cant find the server [URL]... this is only happening on Linux i have a dual boot on an epc with vista and it loads the site. normally i wouldn't even care but my girlfriend will be taking on line classes here and i need to get this to load.
View 5 Replies View RelatedAfter searching the forum I could not find a clear answer to my question so I am giving it a try...
I have installed a LAMP server with Postfix as mail server. The scripts send email as user www-data using the mail server on the same machine.
However, the email got rejected by external mail servers (failed reverse DNS check) so I setup a mail server that meets all needed requirements.
Now I would like to use this second server instead of the mail server on the LAMP server. I found that this could be done with changing sendmail settings in php.ini (I think).
However I am not sure how that will go: www-data is no actual user on the new email server (which requires authentication before sending). Do I need to create a new user on the email server or change the settings in php.ini to match an existing user?
I wanted to setup my server as a router/gateway just for educational purposes and also when it succeeded i will keep the gateway and place it on the front line right after my modem.
My current setup as it is now :
The GATEWAY/ROUTER will be doing the main work to act as a dhcp server and firewall.
Now my setup as it is now :
So now what i ment to do was :
Let the clients connect to the gateway via ETH1 and all the stuff being router to ETH0 which is the NIC that is connected to the internet.
But now i have two huge problems :
1. The DHCP configuration seems to be fine the client machines get their ip adresses and /etc/resolve.conf looks fine to. But somehow the GATEWAY/ROUTER wont let me use the specified external DNs server so i cant do anything on these machines.
2. The firewall script [url] at line 27 should be DROP but if i use this line of code the GATEWAY/ROUTER cannot use his dns server settings so when i try to browse the internet or ping a machine outside my local network it would came up with nothing.
I'm trying to configure Postfix with a mail server that I programmed in C. The main.cf is set in this way :
Code:
relayhost = [myMailServer.localhost]
smtp_sasl_auth_enable = no
smtp_use_tls = no
disable_dns_lookups=yes
smtp_never_send_ehlo = yes
code....
I don't know why it doesn't receive response after HELO. In fact if I debug my mail server with gdb, I can see it sends a 250 response code. Moreover, I've tested my server both with traditional mail clients, as Thunderbird, and through telnet session and it works very well.
I'm just asking about a script (ex, bash script) that will let me know how many requests to each website on the server? So is there a way to get know from shell how many requests or connections to each web site on the server, in order to determine which website is under flood or DoS/DDoS attack.
View 14 Replies View Relatedi am using rhe5.4 , in this how to block the particular website ?
View 2 Replies View RelatedScenario:A - Local Unix machineB - socks proxy server port 1080C - remote mysql server port 3306I want to connect to the remote mysql server(C) from local unix machine(A) using sock proxy(B).
View 1 Replies View Relatedhow i have a machine installed Red Hat Enterprise Linux Server release 5.1 with 2 modem (usb & com port) still i want to configure RAS server so some pple able to connect my server and send me some files.
View 4 Replies View RelatedI installed Apache server with Debian 5.0.2 Lenny. I am trying to write a script which would analysis web log files. I found the log files on /var/log/apache2. There is an access log file, `access.log`. My question is what configuration file determines the location and the name of the access log file. How can I change them? I used CustomLog in /etc/apache2/apache2.conf like below.LogFormat ": %h %l %u %t "%r" %>s %b" common
CustomLog /home/test/my_log_file common Apache2 generated /home/test/my_log_file. But no logs were written in the file even after I run `/etc/init.d/apache2 restart`. Ichanged the log file location. It still didn't work. However, Apache2 still wrote logs in the file `/var/log/apache2/access.log`
I was trying to have access from a browser to the squirrelmail configtest page in my server, making some changes, I accidentaly remove the directory webmail. After I replace it with a backup apache2 can not start. This is what I have. Syntax error on line 281 of /etc/apache2/apache2.conf: Syntax error on line 1 of [URL].. closed. But I am sure there is a ?> at the end of this file.Base on what I read on [URL]...-with-the-tag/ I test without the ?> also, but I got the same error.
View 2 Replies View RelatedI want to access files on my ubuntu server wireless. Is there a way I can do that? I'm sorry if this is a stupid question, but I'm kind of new at this whole server thing.
View 5 Replies View RelatedI have just installed CentOS 5. I have set mysql database to access from remote machines. But now the problem is it is not connecting from the local machine now.
View 5 Replies View RelatedI'm running Ubuntu 10.04 with apache, rails, mysql, etc. My rails site is running at www.example.com. I'm intending to use named-based virtual hosting and I have a virtual hosts file configured/enabled for www.example.com. My site is hosted on Amazon EC2.
The problem is that if I set up a new DNS record -- say test.example.com -- and browse to that, my site www.example.com is served up! That's without configuring any new virtual hosts. And the same is true if I go to my DNS records and define test2.example.com, etc. Without touching my server, these new URLs serve up my website. That's not what I want! I want to use name-based virtual hosting and host different sites for each subdomain.
[Code]...
UPDATE: now I understand a bit more... apparently my real problem is not what I thought it was. My real problem now appears to be that when I copy this virtual hosts file and edit it to add a new subdomain name, set up the corresponding site, etc., and enable the virtual host (a2ensite) and restart (graceful), apache immediately stops serving up any websites. Apparently apache crashes although I do not see any error messages. But all my sites go down and I have to revert and then restart apache.
I thought this was because my virtual host file (pasted above) had an error. So I thought I would start by getting that first file right. Apparently it is right. So now I need to understand why adding a second virtual host causes all sites to stop being served up.
As we know that squid has ability to allow/deny in TIME base.but i want to know that How to Block(deny) perticuler website in certain times of the day in particuler IP or IP Block suppose i want to block(deny) xyz.com website at every day at 10:00 to 13:00 time in 192.168.81.0/24 ip block.
View 7 Replies View RelatedI am swamy new to linux, i would like to host my website on my home pc.
I install RHEL 5 and apache but i am familiar with windows o/s.
what is basic configurations
which ip required
which dns required
can i install dns on my pc or not bzc i have a router with static ip (broadband router adsl 2)
CPU : Pentium D cpu 2.8 ghz
RAM : 1gb ddr-2
Hard Drive size : 80 gb
id like to add a video chatroom to my website, Im looking for a free script. something like 123flashchat. is there any free scripts like that .
View 2 Replies View RelatedI am running ubuntu server for my website.When i logon to my website I am getting this database crashed with this error messages:
DB function failed with error number 145
Table './cmsmycompany/l2m_session' is marked as crashed and should be repaired SQL=SELECT session_id FROM l2m_session WHERE session_id=MD5('7fbe5d447d34103616a0c38c3212183f')
[code]....