General :: 127.0.0.1 Connection Refused ?
Nov 27, 2009Regarding fedora12. how to set up the port 8080 and or tell me why I cannot connect to localhost 127.0.0.1?
I tried to add port 8080 to firewall under other ports, but still doesn't work.
ADVERTISEMENT
General :: Which Element Of Network Refused Connection
Dec 21, 2010How could I determine, which element of network actually refused/close connection?
View 1 Replies View RelatedGeneral :: Listening Interfaces On Ssh - Connection Refused
Jun 26, 2010In my sshd_config file I have the following
Code:
Does this mean that all of my network interfaces are listening as opposed to just one specific network interface? Would 0.0.0.0 include 127.0.0.1?
Also, this computer(A) is on a LAN at my house. It has two network interfaces(eth0 & eth1), both on different subnets. I can connect from another computer(B) on my LAN to this one on one interface(eth0) via SSH just fine. The other interface(eth1) on this computer is hooked up to it's own gateway to the internet using DSL. I'm using this interface(eth1) for running bind.
Anyhow, here's my issue. When using a computer(C), which is a hosted VM , from outside my LAN, to connect to computer(A) via SSH, I get connection refused. So I checked my hosts.deny & hosts.allow files, both empty. I run nmap from computer C and SSH comes up as closed. So I'm thinking it's a firewall issue.
Here's what my iptables -L looks like:
Code:
I've been meaning to learn more about iptables, but which chain is for which network interface? I have also tried running nmap from computer(C) to test bind out on tcp 53 that comes up closed. I run udp 53 and that comes up as closed but then again udp is funny because it's stateless. If I run netcat on udp port 53 from computer C I get a blank line as if it's still running. However, I get that for all other ports anyways so that's of no use.
Unless my AT&T DSL is blocking those ports. But if that were the case would the error 'Connection refused' come up when I try to connect via SSH?
What other tests can I run to troubleshoot?
General :: Connection Refused Error With Uploading Using Ftp
Aug 11, 2011I now have a .tar.gz that has been created during my script, and finnaly i need to upload it via ftp to my computer, but i am unable to because i keep getting the "Connection refused" error, despite the fact that all the syntax appears to be right. in a bout of frustration, i have deleted the code and now no longer have what i had written.. so could someone please let me know the syntax to upload a file to a server? I am aware that other threads have been started about this issue but I am trying to ftp from an iPhone to a computer...
View 4 Replies View RelatedGeneral :: Fatal Connection Refused When Assessing Git?
Apr 8, 2011I wanted to download a public repository, from sourceforge.net.I have tried using socat and configure my proxy but with no success, I have given the detailed specification for configuration of the ssh below,
host cfdem
user git
hostname cfdem.sourceforge.net
[code]....
General :: Sendmail Connection Refused By Host
Jan 13, 2010Is the following sendmail scenario possible? If yes, what modification(s) should be made, in order to work?
system1 with host1 - where the sendmail is executed
system2 with host2 - where the destination email address is stored
When trying to sendmail from host1 to an email address stored on host2. but with the format username@host1, the sendmail service returns Connection refused by host1.
General :: Telnet External IP Connection Refused
May 23, 2011I have CENTOS 5.4 Installed in one machine and i used Real IP provided by our ISP.My requirements for Mailserver are:
Dovecot
Postfix
everythings done but when i tried to telnet my External IP it giving me an error of telnet connection refused but i can able to ssh to my external IP and also i disabled the firewall but still no luck.
General :: Unable To Add Forward Map Connection Refused?
May 19, 2010I work with RHEL, and have instaled DHCP server on it. Sometimes it is happen this bad behaviour:
May 19 10:52:34 alpha dhcpd: DHCPDISCOVER from 00:1f:3c:91:9b:ba (LENOVO-C3236B87) via 10.192.31.0
May 19 10:52:35 alpha dhcpd: DHCPOFFER on 10.192.31.230 to 00:1f:3c:91:9b:ba (LENOVO-C3236B87) via 10.192.31.0
[Code].....
General :: Error - Ftp: Connect: Connection Refused
Aug 31, 2009I Get message Connection refused when trying to connect to other computer in network. My System Ubuntu:
computer1 ip: 10.0.0.1
computer2 ip: 10.0.0.2
computer1 shell:
$ ftp
ftp> open 10.0.0.2
ftp: connect: Connection refused
General :: Ssh Listening Address - When Try And Connect It Says Connection Refused
Apr 7, 2010I reinstalled unbuntu server recently and i am trying to get it to only allow one computer to accsess it. So after doing this etc/ssh/ sudo nano sshd_config I uncomment #ListenAddress 0.0.0.0 Ok so i am trying to accsess my server from a windows machine so i tpyed ipconfig /all to find my ip I found the IPV4 address and i put that address like so ListenAddress 192.168.1.22 But when i try and connect it says connection refused.
View 6 Replies View RelatedGeneral :: Fetchmail - Connection Refused (SMTP Transaction Error)
May 21, 2010I've used fetchmail for quite a while now and never had a problem, until (without having changed anything) today it suddenly quit working, giving me the error message:
fetchmail: connection to localhost:smtp [127.0.0.1/25] failed: Connection refused.
fetchmail: SMTP connect to localhost failed
fetchmail: SMTP transaction error while fetching from stefan%mydomain.com@mail.mydomain.com and delivering to SMTP host localhost
fetchmail: Query status=10 (SMTP)
I googled the error message, but didn't find anything that look promising. I use ubuntu 10.4.
General :: Telnet :Unable To Connect To Remote Host:Connection Refused?
Jul 3, 2011My system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
defaults{
instances=60
log_type=SYSLOGauthpriv
[code]....
General :: Telnet - Unable To Connect To Remote Host - Connection Refused
Sep 11, 2009I did followings:
Code:
But got:
Code:
But as I tried:
Code:
It's OK.
Ubuntu Multimedia :: PulseAudio Volume Control - Connection Failed:Connection Refused
Jul 4, 2010I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.
I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.
[Code]....
Ubuntu Networking :: Setting Up Bluetooth Connection Between Two Computers Throws Connection Refused (111)
Apr 3, 2011I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
Server :: Vsftpd Not Working: Connection Attempt Failed With "ECONNREFUSED - Connection Refused?
Apr 28, 2010vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies View RelatedGeneral :: Record Audio In Single User Mode Using Fedora - Connection Refused
Mar 25, 2011I'm just working on fedora for the first time for my proj. So having many difficulties. My first doubt is that is it possible to record audio in single user mode using fedora? I need it for my proj work..I tried arecord and rec in single user mode.. I'm getting an error stating pulse audio connect error. Connection refused..
View 2 Replies View RelatedGeneral :: Check_NRPE From Ubuntu Server To OpenWRT Router - Connection Refused By Host
May 23, 2011I am trying to monitorize an OpenWRT (Backfire 10.03, r23115) router from an Ubuntu server, but I am having some problems. I have installed Nrpe (2.12) on the remote host (OpenWRT), I have executed the program as a deamon (/usr/sbin/nrpe -d) but when I start the NRPE deamon, I don't get anything about NRPE executing netstat -at or ps -ef.I would need to install check_nrpe on OpenWRT to find out if NRPE is working, but I can't find any ipk package with it. Now, once in the monitoring host when I try to reach the remote host from the server:
/usr/local/nagios/libexec/check_nrpe -H ip_remote_host
I get: Connection refused by host
Even, trying with localhost:
/usr/local/nagios/libexec/check_nrpe -H localhost
I get the same error: Connection refused by host
I have installed Nagios Plugins and the check_nrpe plugin. I have edited the /etc/nrpe.cfg file:
allowed_hosts=127.0.0.1 ip_server
I don't exactly know if it is remote host's fault, monitoring host's fault or both.
General :: Amanda Backup Error - Selfcheck Request Failed Connection Refused
Jun 15, 2010I am trying to backup a client called greetings.com, but when I do an amcheck on the server, I get:
WARNING: greetings.com: selfcheck request failed: Connection refused
General :: Netcat File Transfer - "Connection Refused"
Apr 21, 2010I have two custom scripts I just wrote to facilitate transferring files between my VPS and my home server. They are both written in bash (short & sweet): To send:
[Code]....
The problem is that, for a very quick second, I see something flash along the lines of "Connection Refused" (before pv overwrites it), and no file is ever transferred. The port is forwarded through my router, and nmap confirms it:
[Code]....
General :: Xlib: Connection To ":0.0" Refused By Server?
Oct 2, 2010i typed the command "system-config-network",at the hostname field i gave "james@lee".after closing that window, again i typed the same command "system-config-network". but it gives the following error..
[student@james@lee ~]$ system-config-network
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
ERROR: Unable to initialize graphical environment. Most likely cause of failure is that the tool was not run using a graphical environment. Please either start your graphical user interface or set your DISPLAY variable
General :: An Isolated System In Total Chroot Running Lighttpd, Mysql, Ssh - Get "Connection Refused"?
Aug 12, 2010Basically they all cover running a 32bit app running on 64bit host and so on.I want to have an isolated system in total chroot (running lighttpd, mysql, ssh, etc from there).(For security reasons I have to isolate the dev from the live one.) So I installed the chroot environment, mounted all the neccessary things and chrooted in. Everything went fine. Edited /etc/ssh/sshd_config to use port 22222 instead of 22. Used service ssh start then. It says service running but if I try this: ssh -p 22222 localhost I get "Connection refused". The chrooted is system is very minimal so far so there is no firewall, hosts.allow/deny or anything.
ps.: The chroot environment will be a development area as I already mentioned. I thought chroot is the easiest way but if you say KVM is better or something I can go for it. The machine is easily capable of running even 10 VMs easily.
Networking :: Open Connection Receive A Message "connection Refused"
Apr 6, 2010i m using RHEL5 on my server machine and open suse 10 on my client machine.both system ping each other, firewall is off of my server machine,i put a file from my client to my server machine using scp command but ftp command is not working when i want to open connection i receive a message "connection refused".what can be the issue?
View 5 Replies View RelatedDebian :: Openssh - Connection Refused
Apr 13, 2016When I connect with my vps server through openssh, doesn't establish connection. Openssh is active (see its status), port 22 is open, the sshd_config file is the same of original copy (I have saved one in the case I did a mistake) the only line different permitrootpassword is set on ''no'', there isn't a firewall that block ssh connection and with other remote desktop control like remmina works well.
View 13 Replies View RelatedUbuntu :: SSH Error:Connection Refused?
Mar 25, 2011I've just completed a fresh install of Ubuntu Server (x64) on a HP Proliant N36L. During the installation I selected to install LAMP, SAMBA and SSH. To continue the installation of software on the server I wanted to connect remotely from windows PC on the same LAN. I am using PuTTY but when I try to connect I get "Error:Connection Refused". I have trawled the forums regarding the setup of putty and openssh and everything appears to be correctly configured.I have checked that the services are running on the server and that the IP address for the server is correct.The guides I have read online suggest that ssh should be correctly configured as part of the install, so why can I not connect from the same LAN?Is the firewall enabled by default during install?
View 2 Replies View RelatedRed Hat / Fedora :: Cvs Installation - Connection Refused
Mar 31, 2010I am trying to install the cvs server for the first time on centos , the sercive xinetd seems to start. but when i try to connect to the server using this command cvs -t -d server
It prompts for the password once i enter the password it gives me the error - cvs: Connection refused
Secondly if i telnet to the port 2401 it gives Trying 10.... telnet: Unable to connect to remote host: Connection refused
I checked the if the port is up by netstat-tulpn /netstat -na didnt show me the port 2401
Networking :: SSH Connection Refused Port 22?
Mar 4, 2011I get a connection refused error whenever I attempt to connect to a remote ssh server, I tried the test at and it says outbound ssh port 22 is not being blocked. I'm wondering what else could be the problem.
View 3 Replies View RelatedServer :: Connection Refused By Host ?
Aug 17, 2011I am experiencing a problem with Nagios running some checks on our Ubuntu 10.04 servers.
we have 16 Nos HDD in each servers. These HDD's are checking by nagios with CPU and users.
For whatever reason, all of the checks will come up with the response: "Connection refused by host".
We have checked the server at the time of occurence and all seems fine. No memory issues, no CPU issues etc.
Then within 5-10 minutes the problem goes away.
Server :: ERROR:Connection Refused (111)?
May 24, 2011ERROR:Connection refused (111)when i change the password.I have a freebsd dovecot server.
View 1 Replies View RelatedServer :: Log Into Via Ssh Or Webmin - Connection Refused
Feb 7, 2011at the computer shop we have an ubuntu 9.10 server that we log into via ssh or webmin today i was trying to ssh into the machine and got connection refused, so i logged into webmin and found the ssh server not running when i tried to start with webmin it i got the error
Code: failed to start ssh server * /dev/null not a character device went over to the shell command part of webmin and issued ls /dev -l and looked at the output and found something of concern
[Code]....