I'm try to connect to pop.gmail.com via openssl usingopenssl s_client -connect pop.gmail.com:995and i always have one error socket: Connection refusedconnect:errno=29what can i do to make it work?
View 5 RepliesI am using fetchmail (with ssl support) to download my e-mail. About a week ago, the downloading from two servers stopped, among them gmail.com, due to an ssl error. Usually that means updating the ssl fingerprint in fetchmail.conf, and when I wanted to do this I discovered that there seems to a issue with openssl.
When I do openssl s_client -connect pop.gmail.com:995 -showcerts I now get an error
server:> openssl s_client -connect pop.gmail.com:995 -showcerts
CONNECTED(00000003) 5448:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:188:
Ubuntu 8.04 (2.6.24-28-server #1 SMP Sat Oct 16 17:53:34 UTC 2010 i686 GNU/Linux)OpenSSL 0.9.8g 19 Oct 2007
Can anybody explain to me what the error means and how to fix it?
I am trying to install the cvs server for the first time on centos , the sercive xinetd seems to start. but when i try to connect to the server using this command cvs -t -d server
It prompts for the password once i enter the password it gives me the error - cvs: Connection refused
Secondly if i telnet to the port 2401 it gives Trying 10.... telnet: Unable to connect to remote host: Connection refused
I checked the if the port is up by netstat-tulpn /netstat -na didnt show me the port 2401
i need to set a cluster of two nodes for lamboot, i am using fedora 7
1. passwordles ssh is set.
2. a folder in the home directory is nfs mounted, both on server( 10.1.7.136 ip of the server)and client(ip of the client 10.1.7.129). lam
3. lam 7.1.1. is installed on the system.
4. a file named lamhosts is created containg the ip's of server and client respetively
[lamuser@localhost lam]$ cat lamhost
10.1.7.136
10.1.7.129
lamboot is working on indvidual system but on
[Code].....
I have a box running Fedora 14 upstairs and I've been trying to get it to run VNC server, unsuccessfully. I've RTFM, and followed the instructions step-by-step, but it still won't run. I'm getting no error messages. But when I try to connect from either a Window or Mac client, it either get a timeout or connection refused. I've read and tried all the troubleshooting; been working on this for about 12 hours now. Is there something major that I could be overlooking?
View 14 Replies View RelatedI want to fix my dns if I issue command service named restart it just wont execute the command all it say is connection refused error from rc.d just cannot figure out what the problem is my server is ruining on red hat Linux 9 which is also my proxy server.
View 6 Replies View RelatedI am getting tcp client connection refused error, when trying to establish tcp client connection from redhat linux to solaris unix. Connect system call is giving connection refused error
View 3 Replies View RelatedCan you find my blind spot? I had PuTTY up & running untill I did a reinstall of Fedora13.I can ping 192.168.1.163 fine. SELinux is disabled. Firewall is default (SSH allowed on p22).I have just disabled the firewall with same result)
PuTTY reports:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.07.20 16:23:52 =~=~=~=~=~=~=~=~=~=~=~=
Event Log: Writing new session log (SSH raw data mode) to file: C:UserswimDesktopputty.log
[code]....
I have my desktop computer (running F13) configured to accept ssh over port 22 via the firewall configuration tool. If I type ifconfig -a, this computer, which is running on my wireless network, tells me:
Code:
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
However, if I go to my laptop computer (also running F13) and try and ssh into the desktop, i.e. ssh icthy@192.168.1.100, I get this response:
Code:
ssh: connect to host 192.168.1.100 port 22: Connection refused.
I guess I am confused to what is blocking the connection? Is there another means on F13 other than the default Firewall? I haven't really messed with the network at all. For what it's worth, I am hoping to set things up so I can just ssh into the computer name, (ssh icthy@desktop) eventually, but want to start with the IP. So, can anyone offer a hint as to what I can look for that is blocking port 22?
I am experiencing a bit of a problem with openssh-server. I installed the server like I normally do. It wouldn't work, so I tried using this. It still didn't work. Later, I have realised that when using service sshd start SSH says it started, but when you check if it's running with service sshd status it says it doesn'triend advised me to use /etc/init.d/sshd and I managed to get it started. However, that doesn't return anything, and when I try to connect it says connection refused even when I try to connect from localhost to localhost
View 13 Replies View RelatedI have FileZilla installed on this machine, and OpenSSH (with an open port 22) on another machine on my home network. When I try and connect, I get: Quote: Status:Connecting to 192.168.2.3... Response:fzSftp started Command: open "alphatwo@192.168.2.3" 22 Error:Connection refused Error:Could not connect to server
Which has left me puzzled as I have an open port. Does the username have to be defined somewhere? E.g. the machine acting as my SFTP server can be logged on to locally as alphatwo so that's what I logged in as (with the correct password). Is this correct? If so, does anyone have any ideas as to how I might rectify it? I want SFTP set up so I can copy PHP files from my laptop to /var/www/html/ on another PC (across the home network).
I am doing some R&D on 11g RMAN in oracle at home. i have installed oracle enterprise linux and i have installed oracle software. when i am trying to configure listener, it is error-ed out. i have verified that telnet with the port is not working and i am seeing connection refused error.
View 3 Replies View RelatedI'm just working on fedora for the first time for my proj. So having many difficulties. My first doubt is that is it possible to record audio in single user mode using fedora? I need it for my proj work..I tried arecord and rec in single user mode.. I'm getting an error stating pulse audio connect error. Connection refused..
View 2 Replies View RelatedI tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.
I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.
[Code]....
I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies View RelatedOk, a bit of a backround. I am a recent Ubuntu user and made the switch to Fedora being utilized as a server. I am trying to move to a new MUD(text based D&D type game) codebaseI have gotten my code compiled and executed the startup script. The process shows in the ps ux list. As the game it set up it uses port 7500. As the script running I get a "Connection Refused" error when trying to telnet to port 7500. Upon using nmap, I show only my SSH port open (the only daemon I have installed currently) yet no port 7500 open.
I believe this to be an issue somewhere in Fedora as I've had no issue on Ubuntu with past MUD codebases.I have disabled the firewall within Fedora and still no luck. Please bare with me as I'm new to fedora's intricacies.Short Story for those that hate reading long winded posts: A port that should be open by acript known to work on other distro's doesn't seem to open the called port using Fedora
i administer an isp mail server on centOS my client has a mail server on redhat, the client can send mail successfully but if i try to send mail from outside i get "connection refused error" from my /var/log/maillog can anyone help this has been pending for long and im under fire!!
View 1 Replies View RelatedFriday night I was working on some networking stuff between my two Fedora 14 boxes. I have my laptop and my desktop. on both machines I have "system-config-firewall 1.2.27" and "iptables" (i believe both come standard on F14?) I kept getting the same message as seen below before realizing perhaps I should check my firewall!
I added a rule for incoming and outgoing traffic on port 22 and was able to get in with no problems at all! however today I can't ssh into anything... I can't use "Remote Desktop Viewer 2.31.4" to vnc into the machine anymore. I can't remember the exact error message at this time, it's something close to "Connection was terminated" or "Unable to connect" I can update this message later.
last night I foolishly uninstalled the system-config-firewall and then uninstalled iptables to see if it was a simple firewall issue.... totally hosed my system <insert smiley!>
After reinstalling and realizing I didn't backup my documents <insert smiley!...again...> I started reinstalling all of my applications. I'm still unable to use ssh and I've tried to ssh my own computer.
Is this possible?
# ssh 127.0.0.1
ssh: connect to host 127.0.0.1 port 22: Connection refused
i m using RHEL5 on my server machine and open suse 10 on my client machine.both system ping each other, firewall is off of my server machine,i put a file from my client to my server machine using scp command but ftp command is not working when i want to open connection i receive a message "connection refused".what can be the issue?
View 5 Replies View RelatedRegarding fedora12. how to set up the port 8080 and or tell me why I cannot connect to localhost 127.0.0.1?
I tried to add port 8080 to firewall under other ports, but still doesn't work.
When I connect with my vps server through openssh, doesn't establish connection. Openssh is active (see its status), port 22 is open, the sshd_config file is the same of original copy (I have saved one in the case I did a mistake) the only line different permitrootpassword is set on ''no'', there isn't a firewall that block ssh connection and with other remote desktop control like remmina works well.
View 13 Replies View RelatedI've just completed a fresh install of Ubuntu Server (x64) on a HP Proliant N36L. During the installation I selected to install LAMP, SAMBA and SSH. To continue the installation of software on the server I wanted to connect remotely from windows PC on the same LAN. I am using PuTTY but when I try to connect I get "Error:Connection Refused". I have trawled the forums regarding the setup of putty and openssh and everything appears to be correctly configured.I have checked that the services are running on the server and that the IP address for the server is correct.The guides I have read online suggest that ssh should be correctly configured as part of the install, so why can I not connect from the same LAN?Is the firewall enabled by default during install?
View 2 Replies View RelatedI get a connection refused error whenever I attempt to connect to a remote ssh server, I tried the test at and it says outbound ssh port 22 is not being blocked. I'm wondering what else could be the problem.
View 3 Replies View RelatedI am experiencing a problem with Nagios running some checks on our Ubuntu 10.04 servers.
we have 16 Nos HDD in each servers. These HDD's are checking by nagios with CPU and users.
For whatever reason, all of the checks will come up with the response: "Connection refused by host".
We have checked the server at the time of occurence and all seems fine. No memory issues, no CPU issues etc.
Then within 5-10 minutes the problem goes away.
ERROR:Connection refused (111)when i change the password.I have a freebsd dovecot server.
View 1 Replies View Relatedat the computer shop we have an ubuntu 9.10 server that we log into via ssh or webmin today i was trying to ssh into the machine and got connection refused, so i logged into webmin and found the ssh server not running when i tried to start with webmin it i got the error
Code: failed to start ssh server * /dev/null not a character device went over to the shell command part of webmin and issued ls /dev -l and looked at the output and found something of concern
[Code]....
I am running 11.2 and set ssh to boot at runlevel 3 and 5 through yast and started the service through the terminal. I have turned off the firewall on my wireless router and in the local firewall. When I try to connect from a machine in my office, I get the following
Code:
ssh: connect to host xx.xxx.xx.xxx port 22: Connection refused
When I run telnet from the machine, I get:
Code:
telnet: connect to address xx.xxx.xxx.xx: Connection refused
telnet: Unable to connect to remote host: Connection refused
netstat -tlnp on my machine shows:
Code:
tcp 0 0 :::22 :::* LISTEN 31622/sshd
How could I determine, which element of network actually refused/close connection?
View 1 Replies View RelatedI need to browse the net more securely and bypass throttling by an infrastructure-dictator by creating a SSH Tunnel directly to my internet service provider and use it as proxy.
I tried both a dynamic and local tunnel, was a able to connect to the server and log-in just fine, but when I tried to surf I get a 'Connection refused' error.
Here's what I tried:
Code:
ssh -D 8022 user@tunnel.host -N
ssh -L 8022:tunnel.host:8080 user@tunnel.host -N
(not at the same time of course)
Then I set 127.0.0.1:8022 as proxy in browser settings. As long as the tunnel is open the browser displays a blank page with no error when I try to open a remote web page, while the terminal gives me a 'Connection refused' error.
I'm using OpenSSH_4.7p1 Debian-8ubuntu1.2, OpenSSL 0.9.8g 19 Oct 2007 on Xubuntu Hardy.
In case anybody is wondering this is perfectly legitimate. The tunnel.host I connect to is a server set-up by my ISP specifically for this purpose.
Either of the examples above should work as others who have the same ISP reported that it works. Therefore, I suspect this is an issue with my own security settings which are slightly on the paranoid side but I can't figure out what. Stopping ufw and explicitly opening port 8022 didn't help.